Cisco Wireless :: 2125 Cannot Get Older IPSec Client To Work Through ACL

Dec 6, 2012

I have a ACL applied on a WLAN on a 2125 controller.  I cannot get the older Cisco IPSec (Version 5.0.05.0290) client to work through the ACL and through the WLAN onto it's destination.  When the Cisco IPSec client is on another unrestricted WLAN, it works.  I have allowed TCP/UDP 500, 4500, TCP 10000 both directions and it fails.  I can see the denys counters incrementing but cannot figure out what is being blocked. 

View 1 Replies


ADVERTISEMENT

Cisco Wireless :: WAP4410N Work In Client-Repeater Mode?

Dec 7, 2009

I have purchased 4 of these devices about 2 months ago and have experienced all of the issues reported within this thread.  The came with the 2.0.0.5 FW rev installed, so unless the 2.0.0.5 on the cisco DL site is different, nothing I can do with that.I've tried making them work as stand alone AP's, Bridge<-> Bridge, etc... all modes seem to lock up eventually needing a reboot to get any functionality back.Ultimately, I need to make them work in AP<->Client-Repeater mode.  I've not been successful in making them work in any mode for a prolonged period of time.
 
having just rfound this thread today, I have not tried hard coding the NIC's to 100/full, but will give it a try.  If it works, great, but then that would defeat the purpose of buying an N radio AP.  I would like the potential 300Mbps throughput.

View 13 Replies View Related

Linksys Wireless Router :: EA6500 Cannot Get Client To Work On Another PC

Jan 4, 2013

I have a public service scanner attached to one of my PC. I operating to with a program called Proscan. Proscan can run in server mode and client mode. I run the home pc in server mode. I run a copy of Proscan from work or other PC's when I'm out of town.
 
My old D-Link router died this week and I picked up the EA6500. Proscan connects and broadcast the scanner but I cannot get the client to work on another PC.
 
It runs on port 5001.The IP is 97.89.161.200.My windows firewall is deactivated.

View 4 Replies View Related

Cisco Wireless :: 2125 - WLC Does Not Adopt APs

Aug 4, 2011

I am configuring a WLC2125 which I'll install in a customer's building to convert AP1131 to LWAPP currently it is out of the network as a lab but the problem is that I could convert an AP to LWAPP but it does not associates to the WLC, this is the log it generates:
 
*Apr 08 21:07:13.801: %LWAPP-3-RD_ERR9: spam_lrad.c:8375 APs 00:18:74:4b:ed:e0 country code changed from (MX ) to (US )
*Apr 08 21:07:13.800: %LWAPP-3-RD_ERR8: spam_lrad.c:8056 Country code (MX ) not configured for AP 00:18:74:4b:ed:e0

[Code].....

View 4 Replies View Related

Cisco Wireless :: LAN Controller 2125 IOS Upgrade?

Sep 28, 2010

A customer has wireless LAN controller with version 4.2.205.0 and i want to upgrade it to version 7.do i need to upgrade the controller to intermediate version or i cant directly upgrade it.

View 2 Replies View Related

Cisco Wireless :: 2125 / AP Cannot Join To WLC After Power Failure

Jan 13, 2013

We have cisco wlc 2125 with 13 AP 1131g. All works good. But after power failure one AP can not join to controller, only reset work to recover connection AP to WLC. Additionally, we don't have access to rs-232 port on AP. In this moment on WLC we can see DISCOVERY request from AP and response from WLC to AP, but AP don't send JOIN to controller.

View 2 Replies View Related

Cisco Wireless :: WLC 2125 Custom Web Authentication Page?

Feb 16, 2012

I try to make custom web-auth bundle for WLC 2125. User authentication from this custom page work fine, but any error messages about wrong login/pass not work.

Is this supported function for custom pages? If yes, could you result a working html-code?

View 3 Replies View Related

Cisco :: 2125 Wireless LAN Controller TX Power Configuration?

Aug 29, 2011

I have a Cisco 2125 Wireless Lan Controller and I have problem with hold coverage errors and I had tri different solutions with different antenna, the resume is:The antena gain 10*0,5 Dbi(Using a 5 Dbi antenna or 10 Dbi antenna) with Tx power 1 and the antenna gain 20*0,5 Dbi (using 10Dbi antenna) with Tx power 3 the coverage is the same.
 
If I try the configuration 20*0,5 gain antenna and Tx power 1 the controller show me one error and the controller don't permit this configuration. Why don't permit this configuration?

View 3 Replies View Related

Cisco Wireless :: WLC AP Upgrades On Automatic Update 2125

Apr 1, 2013

I have WLC 2125 on version 6.0.182.0 and AP's on version 12.4(21a)JA.I also have a load more AP's (newones) 1041's with IOS version 15.2.
 
So i have to upgrade my WLC because the newones are not compatable with the old WLC version.What will happen to the old AP's ?I was told they will automatically update the IOS version.These AP's (oldones) are not on site, they are in a differnet LAN.

View 4 Replies View Related

Cisco Wireless :: Migrating WLAN Controller 2125 To 2504

May 29, 2012

I will migrate a Cisco WLAN Controller 2125 to 2504,So I have one question?I need to make all configuration into the new Wlan Controller or I can migrate with one tool or something else?

View 15 Replies View Related

Cisco Wireless :: 1131 Ap Working With 5108 Controller But Not With 2125

Dec 23, 2012

I have this issue regarding the 1131 Access Points. These access points were fat access points from the factory and were applied with LAP ios so that they can join our controller. We have 2 controllers 5108 for  Internal network office use and a seperate 2125 for Guest internet both these are physically seperate networks. These AP's have been working fine since say like 8-9 months and suddenly they started giving problems. The status light keeps changing colour and the AP does not join the controller 2125. Whenever i am connecting this ap to our internal network it joins the controller 5508 and works fine but somehow does not register with our 2125 guest controller. This issue is being faced by one of our client. Could this be an issue due to the ap being loaded with lap ios or does it have anything to do with the different software version fo the controllers as i could not find any things regarding this.

View 3 Replies View Related

Cisco Wireless :: WLC 2125 - Web External Authorization And Disabled Java

Jul 21, 2012

I have cisco wlc 2125 and external web autherthation was configured on it. When user disable the java script in browser cisco wlc do not redirect on my external page instead of wlc show page http://1.1.1.1/login.html with cisco logo. How can i resolve this problem? How to configure wlc redirect to external web auth site with disabled java in users browser?

View 3 Replies View Related

Cisco VPN :: Android / IOS IPSec Client For RV180

Oct 29, 2012

I currently have an RV180 in a small business set-up and curently being accessed remotely by laptops (Quick VPN) and Ipads/Android ICS tablets (PPTP).  All is working well but I've become concerned about the security risks of PPTP and would like to shift the tablets to IPSec.

1) For a  small business are the PPTP risks real?

2) What are the alternatives for Android ICS?  I can't find a Quick VPN client for Android, has anyone seen one.

3) I can't get the core IPSec VPN in Android to connect to the RV180?  Is this possible?  Has anyone succeeded?

View 0 Replies View Related

Cisco Routers :: RV180 And IPSec VPN Client

May 22, 2012

Does RV180 router support client VPN connections using regular Cisco VPN client? Datasheet says it works with Quick VPN client.

If regular non-Quick client is not supported, can both clients coexist (= be installed simultaneously) on the same PC?

Does Quick VPN client support split tunneling?

View 2 Replies View Related

Cisco VPN :: Force IPsec VPN Client To Use ASA 5520

Jun 24, 2012

I have made the following change to my ASA 5520 using ASDM to try and force VPN clients to use a self assigned certificate from the ASA. I made the following changes Remove Access VPN > Certificate Management > Identity Certificates > Add Certificate.Then I made the following change.. Remote Access VPN > Network (Client) Access > IPSec(IKEv1) Connection Profiles > Connection Profile > Edit > IKE Peer Authentication > Pre Shared key and pointed the identity certificate to the one I created in the step above.Having made this change I am still able to VPN without a certificate configured in authentication settings.I was expecting that the VPN would attempt to issue the self assigned cert to client machine?

View 1 Replies View Related

Cisco VPN :: IPSec Client Connection Through ASA 5510?

Mar 28, 2013

I've got random connection issue when I try to connect to a VPN gateway through an ASA 5510 (IPSEC client ->ASA 5510->VPN Gateway).
 
When the tunnel is coming up, those two lines appears in the captured traffic on the internal interface :
 
<private internal IP>.500          > <destination IP>.500:  udp 541
<public external IP>.500 > <destination IP>.500:  udp 541
 
When it's not coming up, the port nuimber for the public IP is not 500
 
(private internal IP).500  >  (destination IP).500:  udp 541
(public external IP).442 >  (destination IP).500:  udp 541
 
I don't understand why sometimes the port for the public external IP is 500 and sometimes not.

View 1 Replies View Related

Cisco VPN :: 2600 Router As IPSec Client

Jan 16, 2013

Currently I'm using Cisco VPN client software to connect to a remote IPSec server on the workstations. I want to to configure IPSec client on Cisco 2600 router which connects to the remote IPSec server so the workstations can access VPN subnet without using VPN software. how to configure IPSec client on the router?

View 20 Replies View Related

Cisco VPN :: SR520 / IOS IPSec With VPN Client Configuration?

Apr 12, 2011

I am having a tough time getting my VPN client to reach any devices on my office network. I have a Cisco SR520 configured with IPSec to terminate Cisco VPN client sessions. The client is able to connect successfully. I get a username/password challenge, and then I get assigned a pool IP address on the client computer. So the VPN connection looks good at that point but I cannot reach any devices in the office network.

Config below:
 
Building configuration... 
Current configuration : 8066 bytes
!
! Last configuration change at 06:14:35 PDT Wed Apr 13 2011 by admin
! NVRAM config last updated at 06:17:11 PDT Wed Apr 13 2011 by admin
!
version 12.4

[code]......

View 6 Replies View Related

Cisco Routers :: SA520W IPSec With VPN Client

Dec 14, 2009

I have a problem to configure a IPSEC VPN on the SA520W ( 1.0.39) with Cisco VPN Client (5.0.05.290). In the logs are following error:
 
ERROR:  Could not find configuration for x.x.x.xERROR:  Could not find configuration for x.x.x.xERROR:  Could not find configuration for x.x.x.xERROR:  Could not find configuration for x.x.x.x

View 9 Replies View Related

Cisco VPN :: IPSec Client Error Through ASA5540?

Feb 27, 2013

We have an ASA 5540 successfully using SSL VPN Client Tunnels with no issues, and have been attempting to build the ability for IPSec Clients to connect as well.  I have the authentication working, yet cannot complete the establishment of the tunnel for the client.  The client receives an error of "Secure VPn Connection terminated by Peer, Reason 433: (Reason not specified by Peer)".  In the log on the client, I see the following when the connection drops:
 
(this is after successful connection, split tunnel setups, then this set of items appears in the log)
377    09:29:08.071  02/28/13  Sev=Info/4    IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:STATUS_RESP_LIFETIME) from <outside IP of ASA>
 378    09:29:08.071  02/28/13  Sev=Info/5    IKE/0x63000045
RESPONDER-LIFETIME notify has value of 86400 seconds

[code]...
 
I see the message where it terminates and where is says 'Account Start Failure' but I can't figure out what that is indicating..

View 2 Replies View Related

Cisco VPN :: Asa 5505 - Connect From IPad With IPSec Client

Jan 27, 2013

Got some issues when setting up IPSEC/VPN on the asa 5505. I want to connect from the ipad with the built in IPSec client..Get these errors when i run the debug crypto isakmp.

View 6 Replies View Related

Cisco VPN :: Remote IPSec VPN - Windows 7 Client And ASA 5505?

Dec 20, 2011

I have difficulties with configuring Remote IPSec VPN with Cisco ASA 5505 and Windows 7 native VPN client. My client PC gets VPN pool IP address, and can access remote network behind ASA, but then I lose my internet connectivity. I have read that this should be an issue with split tunneling, but I did as it is told here and no luck.On Windows VPN Client settings, if I uncheck "use default gateway on remote network" I have internet connectivity (since client is using local gateway), but then, I cannot ping remote network.In log, I see this warnings of this type:Teardown TCP connection 256 for outside:192.168.150.1/49562 to outside:213.199.181.90/80 duration 0:00:00 bytes 0 Flow is a loopback (cisco)I have attached my configuration file (without split-tunneling configuration I tried). If you need additional logs I'll send them right away.

View 4 Replies View Related

Cisco VPN :: Configuration IPSec Client At ASA 5505 Version 8.4

Feb 8, 2012

I want to configurate cisco ipsec vpn client at asa 5505. At my asa the software version is 8.4. Any link or some material to config ipsec vpn client at asa 5505 version 8.4.

View 1 Replies View Related

Cisco Routers :: RV082 V3 - IPsec Client VPN Not Working

Aug 29, 2011

A customer of mine has two RV082 in different locations. The "main" router is providing a gateway-to-gateway VPN tunnel, and is also used by a few road warriors for VPN access. We've had some issues with the "main" router lately, so we've decided to exchange it for a brand new device (v3). The old RV082 was a hardware revision v2 device, so I had to manually rebuild the config on the new router. The new router is working fine so far - connectivity and gateway-to-gateway VPN are fine. IPsec Client VPN, however, doesn't work at all. The config of the new router is identical to the config of the old one, IPsec Client VPN used to work fine on the old router.
 
The router is running the latest firmware (v4.0.4.02-tm). I've been trying to make IPsec VPN work with "QuickVPNplus ver: 1.0.6" and the "Cisco QuickVPN Client v1.4.2.1". From what I understand, both programs first connect to the routers external IP and download some sort of VPN config file. The info in that file is then used to create the actual connection. The problem is that the config file is invalid. It contains HTML code instead of config data. This is the code: "<HTML><HEAD><meta http-equiv="refresh" content="0; URL=/cgi-bin/welcome.cgi"></HEAD><BODY></BODY></HTML>". The URL is the same I see when logging in to the admin interface of the router. The Cisco client tells me in its "wget_error.txt": "rwConnStart message=All 1 wget requests did not return a valid vpnserver.conf". Both clients connect to the router fine, and the config download itself is working - only the returned data is invalid.
 
I've already tried lots of stuff to make the problem go away - enabling/disabling the firewall, VPN passthrough options, and other things. I'm beginning to think that there may be a bug in the firmware I'm using, or that the way Client VPN works has changed in a way that makes connecting with a client implementing the "old" method impossible. By the way, PPTP is working fine, so we're using it as a temporary workaround. My client, however, isn't happy with this workaround - he bought a relatively expensive router so he can make use of its advanced features, after all.

View 8 Replies View Related

Cisco VPN :: 1921 - IOS L2TP IPSec With Windows VPN Client

Apr 7, 2013

I'm having problem establish l2tp/ipsec vpn connection from Windows vista/7 vpn client to cisco 1921 ( ios 15.2 )
C1 --------> (internet cloud) ---------> (cisco 1921)----->LAN
 
Error that I'm retrieving is always the same: Error 789: "The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer"
 
But I'm able to establish l2tp/ipsec vpn connection to the same vpn server with my iPhone 4.
 
Below is isakmp debug log from lns router(cisco 1921) when I've tried to establish vpn with windows client. Anything useful from these logs to point me on the right direction to finally solve this problem with windows clients.
 
#debug crypto isakmp
*Apr  8 10:56:47.018: ISAKMP (0): received packet from 186.51.43.137 dport 500 sport 987 Global (N) NEW SA
*Apr  8 10:56:47.018: ISAKMP: Created a peer struct for 186.51.43.137, peer port 987
*Apr  8 10:56:47.018: ISAKMP: New peer created peer = 0x3296C24C peer_handle = 0x80000068
[Code]...

View 4 Replies View Related

Cisco Wireless :: 2125 - Dolphin 7900 Handheld Connects To WLC But Sometimes Lost Signals

Sep 15, 2010

I have a 2125 WLC. I have some 1242 Access Point registered to the WLC. The problem is that the handheld connects to the WLC but sometimes it shows that it has lost wireless signal. Users say that this happens when they go from one site to another. I go to that specific site with my AirMagnet tool and it shows full signal. The customer is saying that WLC is not working with roaming properly.
 
The handheld is a Dolphin 7900.

View 4 Replies View Related

Security / Firewalls :: Cisco Ipsec Client Remote Subnet

May 25, 2011

My employees connects with a cisco ipsec vpn client to asa1,They can connect the network 192.168.1.0/24 from the employee location.(192.168.3.10 - 192.168.3.15) ip pool.Some people must also have a connection to the 192.168. 2.0/ 24, is it possible when they connect to asa1 with the ipsec vpnclient and that the 192.168.2.0/24 network also is avaible.

View 3 Replies View Related

Cisco VPN :: Client Version 5.0.07.0290 Disconnects From IPSEC Server

Jun 17, 2011

I have a client that is getting disconnected quite frequently from our VPN Concentrator and  in looking at the server I cna find no issues or cause for the disconnect. his ping to the concentrator never fails, but yet is disconnects. I have hundreds of remote VPN clients connecting to the same concentrator without issues.

[CODE]...

View 2 Replies View Related

Cisco VPN :: ASA5505 IPSec Remote-Access Client To Network

Sep 28, 2011

We have two sites connect with an IPSec L2L VPN.
 
-Site A: 192.168.13.0/24

-Site B: 192.168.2.0/24
 
On both sites we have a ASA5505(Base license) to terminate the tunnel.On Site B we also got a remote access vpn to which we can connect using the vpn client.The lan2lan tunnel works fine and so the remote access vpn.Now i want to connect to Site A using my vpn client connected to Site B. [code] There are no vpn-filters or other special policys in place..If tried to ping from my vpn client to Site A while i was debugging ipsec 255 on site B: the asa matched the l2l-tunnel for traffic sourced from 192.168.25.x to 192.168.13.x but when im doing a show crypto ipsec sa detail there are no packets getting encrypted..so of course no packets reaching my asa on site a.

View 9 Replies View Related

Cisco VPN :: ASA 5505 / Misconfigured Remote VPN Server Using IPSEC Client?

Mar 22, 2011

The environment is:
 
ASA 5505 running 8.2 with ASDM 6.2.
VPN Client Version 5.0.05.0290
 
I've installed both the anyconnect and ipsec VPN clients and successfully connected for remote VPN server access; however, the client shows no packets being returned.  Thinking that I misconfigured, I reset to the factory default and began again.  Now I only have the ipsec vpn configured and I have exactly the same symptoms.  I followed the directions for configuring the ipsec vpn in Document 68795 and rechecked my configuration and I don't see what I've done wrong.  Given that I can connect to the internet from the inside network, and I can connect to the VPN from outside the network (and the ASDM Monitor shows an active connection with nothing sent to the client) I have to believe it is either a route or an access rule preventing communication but I can't quite figure out where (and I've tried static routes back to the ISP and a wide variety of access rules before flushing everything to start over). 

[Code] .....

View 4 Replies View Related

Cisco Routers :: Windows 7 32 Bit IPSec Client To RV220W Error 789

Oct 9, 2012

I try to connect to RV220W with windows 7 client but  I fail : error 789. I compare again and again pre shared key, but it doesn't change anything. How to connect to RV220W with IPsec client ?

View 4 Replies View Related

Cisco VPN :: ASA5520 - IPSec VPN Client And Multiple Target Networks

Sep 9, 2012

I am using an ASA 5520 running 8.2(4). My objective is to get a VPN client to access more than one network on the inside of the network, i.e., I need to VPN in with an IPSec client and be able to establish tcp connections to servers at 192.168.210.x and 10.21.9.x and 10.21.3.x, I believe I am close to having this resolved, but seem to have a routing issue.

View 5 Replies View Related

Cisco VPN :: ASA 3750 IPSec Client Registering Home IP Address

Aug 30, 2012

I installed some Nexus 5k to replace there 3750 and added dynamic routing. Well after working out most of the issues with most of the stuff, there is one issue that still remains. From what i understand (I have not made it abck to the site yet) when there users connect to VPN with IPSEC (they only use the thick client) they register there local ip address to DNS and thier VPN assigned IP address. At this time I dont have access to the configurations.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved