Cisco Wireless :: 4402 / 3560 - Module For Connection
Mar 12, 2013I bought Cisco AIR-WLC4402-12-K9 with 2 x sfp transceivers 3CSFP93-4500 and WS-C3560-24PS-S.
My Question is which module or modules will i need to connect them up.
ADVERTISEMENT
Cisco Wireless :: Kindle Touch And WLC 4402 Connection
Jan 5, 2012We are a public library and offer an open wireless cloud to our patrons. We are currently having trouble with people connecting to our wireless with the Kindle Touch version 4. Users of the Kindle Fire and older models have no problems with connecting, just this one specific model. We are using Cisco Aironet 1230 Access Points connecting back via LWAPP to a WLC 4402 running code version 7.0.220.0. The clients are receiving their DHCP options from a Windows 2003 server. Besides the standard options we are also pushing the WPAD 252 option.
View 4 Replies View RelatedCisco Wireless :: WLC 4402 LAG Connection To 2 Different Chassis Of 6509 VSS Switch
Mar 28, 2012I have inherited a 6509 VSS switch system as the network core and have the task of ensuring proper redundancy and redesign of the directly connected data center devices. One of the connected devices (WLC 4402) physically appears to be connected to both switches - the WLC is in the same rack as VSS-Chassis1 so I can trace the fiber from WLC port 1 to gi1/1/22, the other fiber from the WLC port 2 goes into the floor and presumably over to VSS-Chassis2 gi2/1/22 (there is fiber connected there, I have link lights on both sides, and the port channel, Po200, on the VSS switch which is configured on gi1/1/22 is also configured on gi2/1/22). My question pertains to the CDP neighbor output I get on the VSS switch: (truncated to include just the WLC) [code]
So my question, arising at least partly from the apparently misleading CDP information, is this: How can I confirm that the WLC is correctly dual homed to both core switches? (short of tracing the cable) I ask because there are several other devices (not WLCs) that need to have the dual homed connections confirmed.I tried a layer 2 trace route but for all macs associated with the WLC, the trace abborts with the error "Device has Multiple CDP neighbours on destination port."
Cisco :: 4402 - Connect To Pppoe Server With Connection From Wireless Network?
May 23, 2011We have WLC-4402 and LWAP-1510, we have issue when users trying to connect to pppoe server with pppoe connection from wireless network. On LAN, pppoe connection work properly and everything is normal. Also I enable broadcast fowarding on GUI but he problem still exist.
View 1 Replies View RelatedCisco Application :: ACE Module A2(3.5) Is Dropping Packets And Closing Connection
Jul 26, 2012I have a ACE module A2(3.5) installed, I am having a connectivity problem between two servers in my network. I have captured some traffic on different points in my network and from capture it seems like the problem is with this ACE module or somehow it is closing the connection.
View 6 Replies View RelatedCisco Security :: ASA5520 Send Traffic To SSM Module / Internet Connection Becomes Slow
Jun 8, 2011I have installed CSC-SSM-10 on cisco ASA 5520.I am facing two problems
1 : When I send traffic from ASA to SSM module then internet connection becomes slow and sometimes internet session disconnected.
2. When I try to manual update then following erros shows please see attachment .
Cisco VPN :: 3560 - Getting Intermittent Connection To Internal Resources
Dec 14, 2012I have an intermittent issue happening on my company's firewall, and I'm at a loss as to how to troubleshoot further.
We recently made some changes to our network, which included moving an ASA 5505 from one location to another. In moving this we also connected it to a different switch. It used to hang off a Cisco 3560, and now it hangs off a ProCurve 5406zl.
The setup is that the ASA is connected on two ports to the HP, which is simply a layer 2 device sitting between the firewall and the uplink to our ISP. One port, e0/0, is the outside interface and is set to switchport access vlan 2. The second interface, e0/1, is set for vlan 1, also access mode. It has an IP of 10.0.0.2. The HP on the other end of that has an IP of 10.0.0.1. So outside VPN connections come through the HP to the ASA on e0/0, and back out the ASA on port e0/1 to reach devices on the internal network.
What happens is that when a user connects to the VPN, they can reach internal resources intermittently. For example, I tried to ping an internal server IP address (let's say 10.0.0.23) from my laptop, while on the VPN, and pings failed. However I could ping that IP from the ASA itself. Another example is that during one VPN connection I was unable to connect to an internal web server, but once I disconnected and connected ahain I could reach the server fine.
The intermittent nature of the problem made me think that it could be an ARP issue, that somehow the traffic is getting sent back out the wrong interface sometimes, hence the lack of communication. However when I did show switch mac-address | include mac address, using the base mac of the HP, I only saw the mac address of the HP on one interface, e0/1. That makes me think that things are working as they should. Although I guess maybe it should appear on both interfaces...? I don't know. How I can most effectively troubleshoot this? It seems like the symptoms are indicative of some kind of rookie mistake, but for the life of me I can't figure out what it is.
Cisco WAN :: 3560 - Lost Connection When Ip Routing Enabled
Dec 13, 2011i am configuring a 3560, everthing is fine until i enable the "ip routing"
i lost connection to all vlan
Cisco Switching/Routing :: 3560 To Make Sure Not To Take Over Console Connection
Jun 11, 2013I have two 3560s that i would like to upgrade. But first i would like to make -absolutely- sure i dont wind up in a situation where i have to roll back over a console connection.to the day i still cant understand why oh why someone removed (or chose not to implement it everywhere) tftpdnld from rommon ;)
View 8 Replies View RelatedCisco Switching/Routing :: 2821 And 3560 Multicast Servers Connection
May 9, 2012I start configuring Cisco 2821 router for multicast . First short description and attached sheme explanation. Let we say I have small network with 100 users. One router and Cisco switch 3560. Two VLAN’s, one for data another for multicast. Data from internet works fine but now I want to connect multicast servers (or source of more multicast streams) from another subnet. Router have three interfaces.I expect there should be no problems with multicast configuration, but unfortunately it is not like I expect. What I did ?
View 10 Replies View RelatedCisco Switching/Routing :: 3550 / 3560 - Can Multiple Connection Between 2 Switches
Jul 9, 2012For some special arrangement, I would like to connect 2 access ports from a 3550 switch to 3560 switch.1 port for vlan 200, another port for vlan 201.Will this introduce bad thing to the switches?
View 4 Replies View RelatedCisco Switching/Routing :: 3560 G - Static DHCP Client Drops Connection
May 31, 2012 i am not sure if this is something with my DHCP setup or not, but it certainly seems to be the culprit. I am running a 3560G and using it as DHCP and to do V LAN routing (Geiger protocol). I have 10 pools configured with a few static addresses per pool. Now to get down to the problem. I have a computer (and this problem seems to be a gremlin as it changes what computer is affected quite often) that will connect, get its IP, immediately disconnect, then send out a DHCP req again. The computer has a static assignment in the pool, and for the brief second that it connects, it gets the right address. If i move the computer to another v lan, all works right. If i delete the static entry it will get an address in the right v lan no problem. The command i have been using to add static entries is:
address xxx.xxx.xxx.xxx client-id 01xx.xxxx.xxxx.xx
That seems to have been working on all my static routes except for a bank of computers in vlan3. I have went as far as to delete the pool and recreate it, heck i even recreated the v lan and i am still having issues. Below are some snippets of the running config for review.
The DHCP Pool for the affected LAN:
ip dhcp pool Dev3
network 192.168.3.0 255.255.255.0
boot file bootx86wdsnbp.com
next-server 192.168.1.78
dns- server 192.168.1.8 192.168.1.78
[Code] .....
Cisco Switching/Routing :: Shape 3560 For 10Meg Metro-E Internet Connection
Nov 12, 2012I have been reading for awhile now on all the Cisco forums on the 3560 and shaping egress traffic but I wanted to verify my thoughts on this. I have 3560 that connects to the ISP that is policing at 10Megs, I want to shape my egress traffic going to the ISP, I do not want to provided QOS to any specific traffic type but only shape all traffic outbound. Will my config below shape "all" egress traffic going to the ISP on the 3560, on a port that is physically connect at 100Meg Full duplex?
int gi0/1
srr-queue bandwidth shape 40 40 40 40
I gathered these numbers using the formula of 100* 1/weight, which would equal 2.5 and if each queue has 2.5 meg that would = 10Meg. However another concern is that I don't think I have the full 100Meg on the interface to use (correct?)
Cisco Wireless :: Can't Get APs To Recognize 4402 WLC
Nov 20, 2011I have 2 4402 WLC's and am in the process of deploying 1042 APs out to sites. But The AP's wont recognize the WLC. I have configured the DNS for CAPWAP but still no dice. I have had to serial into each unit and give it a static IP and then I can see it on the WLC. Shoulsnt this be automatic?
View 21 Replies View RelatedCisco Wireless :: WLC 4402 Has Detected Its IP Add Being Used By Mac
Jul 29, 2010Any explanation about this warning from the WLC4402 after the software upgrade to 7.0.96. version? this is the message: Warning: WLC has detected its IP add xx.xx.xx.xx being used by a machine with MAC add xx:xx:xx:xx.and the MAC add found is the the mac add of the dynamic interface of the WLC.
View 7 Replies View RelatedCisco Wireless :: 4402 WLC Cannot Join More Than 47 APs
Jun 29, 2011My WLC running 6.0.182.0 suddenly could not accept more than 47 APs! Ihave a 1240 trying to join but failed with no obvious reason (no special errors in debugging).
I unplugged one of the joined and the first one joined!! I replugged the second one but could not join!! I unplugged the first one and replugged the second one: the second joined the controller but the first could not associate again!
Cisco Wireless :: AP Supporting 4402 WLC?
Jun 25, 2012Can 3600 series model AP work with WLC 4402 with existing license, we purchased 25 LIC pack and still using only 15. Any recommended Part no on 3600 series with external Antenna
View 5 Replies View RelatedCisco Wireless :: AP 1262 Cannot Join WLC 4402
Jun 7, 2012We have two cisco 1262 AP and a 4402 WLC, the AP cannot join the WLC. The AP gets the address from dchp
I cannot ping the AP address from the WLC, but i can ping the default gateway and other VLAN addresses.
I already read the info on the this link : [URL] Still our AP cannot join the WLC no matter what i have tried.
Setup
- VLAN setup on a Cisco 3560 48 port poe Switch
- tunk configured btwn the Gi Interface and the Management physical port
- WLC mode is configured for Layer 3
- AP Manager and Management are in the same Subnet
- Option 43 is configured for the with the AP Manager's IP address
- Opotion 60 is also configured with AP Manager's IP address
- the port connected to the APs are in the AP Manager VLAN
Cisco Wireless :: AAA Authentication Failure On WLC 4402?
Jun 13, 2012Error: AAA Authentication Failure for UserName:radiususername User Type: WLAN USER
I am using a window radius server. I have added my WLC 4402 as a radius client on my radius server.
I followed the instructions on the MS link : [URL]
I want to use my windows raduis authentication for WLC management login and Web-Auth for guest WLAN user login.
Cisco Wireless :: 4402 Code Upgrade To 7.0.230.0
Feb 3, 2013Our company has a customer with a Cisco 4402 WLC and a code version of 4.2.130.0 . The customer wants to upgrade the code to 7.0.230.0. Is there any flash size requirement when upgrading to 7.0.230.0? (upgrade train: 4.2.130.0 ----> 4.2.209.0 ----> 7.0.230.0), How can I find the flash size?
View 2 Replies View RelatedCisco Wireless :: Configuration Migration Of WLC 4402
Feb 3, 2013We got WLC 4402 running software 7.0.235 and would like to backup the configuration and restore on 5508. Is this doable? Do we need to be on the same version as WLC 4402. How to get cisco document to follow the steps if the above is doable,5508 is new with no setup.
View 6 Replies View RelatedCisco Wireless :: How To Connect One 5508 And 4402
Jan 16, 2012I need to install one 5508 and a 4402 together to bring redundancy to a wireless environment.Can I do this?. What are the neccesary steps to perform this?, the idea behind this is to bring redundancy is the primary WLC falls for any reason.
View 4 Replies View RelatedCisco :: Wlc 4402 - Wireless Client Ip Address?
Mar 7, 2011I have two wlc 4402 to control 50 AP 1131. 2 WLC: wlc-01 and wlc-02, wlc-02 config as backup wlc in the same mobility group. Client authentication:EAP with Microsoft IAS/AD.All AP have joined wlc-01. Wireless client work well with wlc-01.For testing I config access point AP01 have primary wlc: wlc-01, secondary: wlc-02 If I change config of AP01 like this: primary wlc: wlc-02, secondary: wlc-01. Client is hard to connect to wlc-02 and it only connect when client set static ip ALL wlc run this softwar image: 7-0-98-0 Should I send wlc-02 to warranty service?
View 8 Replies View RelatedCisco Wireless :: 4402 Could Not Register IP Add On MSCB
May 17, 2012I do get this error all the time on my WLC 4402 logs:
"Could not Register IP Add on MSCB. MSCB still in init state. Address:e4:ce:8f:13:e4:de[...It occurred 2 times.!]"
Cisco Wireless :: WLC 4402 Ver 5.1.151.0 Working With Air-ap1041n-e-k9?
Jul 18, 2012I have WLC 4402 working with AIR-AP1131AG-E-K9. Need to buy another pair. I looked to the side air-ap1041n-e-k9. Tell me whether or not the compatibility of the controller and the AP1041n? One more question. When buying in 1131 is still in the box and power cord to the point. The new 1041, the purchase comes with the point of the power cord?
View 13 Replies View RelatedCisco :: 4402 WLC Guest Wireless Setup
Jul 24, 2012I am trying to setup a Wireless Network on my WLC that is totaly independent of our internal LAN. Port1 is designated at the .14.0 network and Port2 is the .18.0 network. The 14 network (Port1) will be the guest and 18 network (Port2) the internal wireless.
The issue i am having is nothing is routing to Port1. I have the Guest Wireless set to get DHCP from the WLC and i can get an address but i cant get internet access. I tried configuring a Network Route but it will only let me set the service port as the Gateway and not the IP for Port1.
I am running software version 5.1.151.0 and using this guide as it is the only one i can find. [URL]
Here is a screen shot of my Interface config.
Cisco Wireless :: Web Authentication Using LDAP On WLC 4402?
Dec 18, 2011We are attempting to use LDAP for web authentication on a WLC 4402.
[URL]
You are able to connect to the SSID and it reidrects you to the login page as it should. When you enter your username and password you get a message that "the username and password combination you have entered is invalid." Based on the following log it looks like the LDAP bind is the issue.
*LDAP DB Task 1: Dec 19 11:19:26.584: %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1038 Could not connect to LDAP server 1, reason: 1005 (LDAP bind failed).
We are able to test the following configuration with ldp.exe successfully,
Server: ***.***.***.***
Port Number: 389
Bind Username: CiscoBYOT
[Code].....
Cisco Wireless :: WLC 4402 No Boot-up Dead
Jun 22, 2012I tried to upgrade the cisco boorloader pf WLC 4402 from version 4 to 7.2. I updated ER.Aes FOR 7.2 (EARLY RELEASE.aes). It was updated perfectly and then I rebooted controller....now i can only see blank screen from connected console.I tried the flash of other lan controller but its not working because the issue is in the ROM as the boadloader file is in the ROM which is corrupted now i want the solution to upgrade the boatloader file inside the ROM.
View 1 Replies View RelatedCisco Wireless :: 5508 As Backup For 4402-25-K9?
Jun 12, 2012My customer has a 4402-25-K9 and need a backup (failover) controller to avoid data transmision break when primary controller goes down.4402 are end of sale so I have a question can I use 5508 to get Controller Failover Protection with 4402 ?
View 3 Replies View RelatedCisco Wireless :: AP 1262 Cannot Join WLC 4402
Jun 6, 2012We have two cisco 1262 AP and a 4402 WLC, the AP cannot join the WLC.
The AP gets the address from dchp
I cannot ping the AP address from the WLC, but i can ping the default gateway and other VLAN addresses.
I already read the info on the this link : [URL]
Still our AP cannot join the WLC no matter what i have tried.
Setup
- VLAN setup on a Cisco 3560 48 port poe Switch
- tunk configured btwn the Gi Interface and the Management physical port
- WLC mode is configured for Layer 3
- AP Manager and Management are in the same Subnet
- Option 43 is configured for the with the AP Manager's IP address
- Opotion 60 is also configured with AP Manager's IP address
- the port connected to the APs are in the AP Manager VLAN
Cisco Wireless :: AP Fallback Not Working With 4402?
Apr 12, 2012I have an issue with AP Fallback not working with two Cisco 4402-50 WLC's. Here is the senerio:
Site 1 has a 4402 (WLC01) running software 7.0.220.0 with 48 associated access points. AP Fallback is enabled in Controller > General and all 48 AP's are set to Critical failover with WLC01 being the primary controller and WLC02 (at site 2) being the secondary.
Site 2 is the location of WLC02 which is also running software 7.0.220.0 but has 0 ap's associated and also had AP Fallback set to enabled.
Your typical active/passive setup
The problem is when WLC01 goes down all of the AP's fail over to WLC02, however when the connection is restored to WLC01 we have to manually reboot each access point in order for them to reassociate back to the primary controller. Isn't AP Fallback enabled suppose to allow the AP's to move back to the primary controller once connection is reestablished?
Cisco Wireless :: WLC 4402 Software Upgrade
Nov 7, 2011I ##have a customer with WLC 4402 in use, running software version 7.0.98.0, and supporting 11 APs at present. The customer wants to enlarge the WLAN, which involves increasing the number of APs. I #####have purchased a new WLC5508, and have installed it onto the network alongside the 4402. the 5508 is running software version 7.0.116.0. Because the wireless network is critical to the user, we want to move the APs over to the new controller while the network is up and running, then remove the 4402.
However, when we set the 5508 as the master controller, or tell one of the APs to use the 5508 as its primary controller, the AP connects to the new controller, downloads the new software version, attempts to load it but reports an error with the unzipped file size of the software and fails to boot. formatting the flash on the AP, then disconnecting the 5508 from the network and rebooting the AP allows it to connect to the 4402, it downloads the older software and boots as normal. A new AP, if connected to the 5508 in a test scenario (ie no 4402) connects, downloads and boots perfectly.
I #have the upgrade software to allow the 4402 to be upgraded to 7.0.116.0, but I am concerned that, if this is installed, the existing APs will then fail to boot from the 4402 or the 5508.all APs are 3502s, running IOS version 12.04(23c)JA when connected to the 4402 and 12.04(23c)JA2 on the 5508.
Cisco Wireless :: WLC 4402 No Network Access
Mar 11, 2013We have two WLC 4402 WLC in active-active mode in our setup. The issue we see is that a user/laptop gets connected and gets the ip address but there will be no network access. We see a yellow exclamation sign at this time in network icon in tray and we can not ping gateway at this point. We have run debugs at this time for the machine and we could see that was in "RUN" state its only that the machine can not access network.
View 11 Replies View Related