Cisco Wireless :: AP 1142 Will Support WLC2506 Or Not?
Jun 10, 2012that cisco ap 1142 will support WLC2506 or not .
View 2 Replies
ADVERTISEMENT
Cisco :: IOS Upgrade - 4400 To Support 1142 APs
Jun 26, 2011I have to upgrade a couple of 4400s to support 1142 APs. The controllers currently support 1131s, and are on version 4.0.179.11. (I know, way back there...)
Seeing this huge gap between the level we're on and the most current version, thought I'd better find out what's recommended.
The available MD versions are 4.2 and 6.0
The available 4.2 versions are:
4.2.209.0(md)
[code]....
The next MD release is 6.0.202.0 .
Wireless :: Can Wireless Router Support Up To 100 User Including Support Network Printer
Feb 16, 2011can wireless router support up to 100 user including support network printer
View 1 Replies View RelatedCisco Wireless :: AP 1142 - Operate With WLC
Jul 8, 2012I have Cisco AP 1142 standalone and I want this one to operate with WLC.
I have searched in Google, they said I need to upgrade AP1142.
I don't know how to upgrade it.
Cisco Wireless :: Can't Connect To AP 1142
Aug 26, 2012i have a problem using my usb to serial cable connection, i can connect to one router on my work, but i can't connect to AP 1142, (i have tested also con AP 1231).i have a laptop running windows 7 64 bits, before i use a win xp 32 bits, and i didn't have problems.i am using putty, and have installed tera term 4.74 but the same.connection details, 9600, 8, 1, N, N.
View 5 Replies View RelatedCisco Wireless :: Can't Tftp To 1142 AP
Apr 29, 2013I can't get connectivity from laptop to AP using cross over or straight through cable to do a tftp transfer from tftp server on laptop to ap.
I held the mode button on ap and powered on to get to rommon. The ap has no ios so it goes to rommon anyway. ap light is blinking red.
ap: set
DEFAULT_ROUTER=10.0.0.1
IP_ADDR=10.0.0.1
NETMASK=255.255.255.224
[Code].....
Cisco Wireless :: AP 1142 Not Discovered In WLC?
Feb 28, 2013After AP is booted it shows the following message and cannot able to join in WLC:
*Mar 1 07:13:37.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.71.16 peer_port: 5246
*Mar 1 07:13:37.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
[Code].....
Cisco Wireless :: 1142 Converted To LAP And VLANs
Jan 22, 2012I just converted AP 1142 to LAP using the image "c1140-rcvk9w8-tar.124-21a.JA2.tar".
The WLC is a 5500 with 2 NIC : one on 192.168.0/24, one on a specific vlan 10.20/16
The main management interface is on 192.168/24 but we defined as management the interface on the 10.20/16 network.
For the access points, we use ports on a native VLAN on 10.20/16 with other available VLANS which are used for the wlan networks
We have 1152 APs which work fine on this config but that needed to be registered on the 192.168/24 network, then we moved them in their VLAN 10/20/16 and they work fine.
We also have 1142 APs which have been upgraded to LAP. These AP do not work with our architecture. They register correctly on the 192.168/24 network, but do not give access to the wlan VLANs. If they are moved in the 10.20/16 network, they don't register to the WLC (message : Timed out while waiting for ECHO repsonse from the AP). The AP do not get an IP.
is there a restriction with VALNs on these AP ? or is something false ?
Cisco Wireless :: 1142 AP Won't Set To Factory Defaults
Aug 28, 2011I have an 1142 AP that I am unable to set back to factory defaults.Here is what I have done so far:
- boot AP while holding down the mode button
- ap: delete flash:private-multiple-fs
- yes
- ap: boot
- when the AP boots fully I try and enter any lwap ap commands and get "ERROR!!! Command is disabled"
- the AP name and password were reset to defaults but I am unable to get the IP address cleared.
I've also tried "clear lwapp private-config" and get an error saying the command is disabled.
Cisco Wireless :: 1142 What Version Of Code To Be Used
Dec 9, 2012I need to convert some 1142 APs to lightweight mode. They will connect to controllers running 7.3.101.0. I noticed there's two options of Lightweight IOS code available c1140-k9w8-tar.152-2.JA.tar and c1140-rcvk9w8-tar.152-2.JA.tar. Whats the difference between the two versions of code?
View 4 Replies View RelatedCisco Wireless :: 1142 AP Antenna Configuration?
Aug 13, 2012When we take a look at the internal antennas on the 1142 AP, we notice the 5ghz pointed all the same way, but for the 2.4ghz we can see each offset by 45/120 degrees. It was my understanding that all antennas are omnidirectionals on the 1142, why are those 2.4ghz antennas not all pointed the same way? onfiguration advantage and that each antenna is indeed omnicadirectional? Example, if I shut just one antenna off, do I lose a sector (120degree)?
View 5 Replies View RelatedCisco Wireless :: Setting Up Additional 1142 AP?
Jul 27, 2011I recently purchased another 1142 AP to expand out our current wireless infrastructure, my question is, what exactly needs to be done for this to work so that users can roam freely and auto-connect to the closet AP with the best connection without getting disconnected?
I have set all the settings the exact same on the new AP to match the existing AP. (How to save the configs into a file would be great, I am not sure how to do that)... But anyhow, before I launch it, I would like to be sure I am correct so I do not bring down the existing network. Of course, the only difference between the 2 are the IP addresses. AP1 is 192.168.2.2 and AP2 is 192.168.2.3
All computers are using Linksys Wireless-N cards.
Cisco Wireless :: 1142 LAP In Operational Status (Down)?
Nov 1, 2012The last three new APs I have received from our supplier (official Cisco 1142 LAPs) have all successfully connected to our 4400 series WLCs but are all reporting as being in an Operational Status of 'Down' ie their A/B/G/N radios are not broadcasting even though the APs are all in an enabled state. Furthermore, there is no steady green light showing on the APs - there is no light showing whatsoever (although they were displaying the familiar red-orange-green lights while they were pulling down the IOS images from the WLCs).
The only strange thing I have noticed is that in the AP config screen, the ‘Mini IOS version’ is shown as being v7.3.x. The other – working APs – we have of the 1142 series show v3.x. I know that controller code v7.2 and above only work with the newer 5500 and 7500 series WLCs. Could this be the issue and have any of you seen this issue previously? I am running WLC code v7.0.230.0.
Cisco Wireless :: WLC 2540 Cannot Detect AP 1142
Jun 20, 2012I have WLC 2540 and AP 1142..i have configure them both and got connected(WLC can detect the AP) yesterday then i turn off them both and now when i powered up , the WLC cant detect the AP but AP and WLC can still ping each other they communicated at layer 2, both WLC and AP in one IP segment.
here some debug from AP
*Jun 21 13:49:47.784: %CAPWAP-5-SENDJOIN: sending Join Request to 10.0.3.2
*Jun 21 13:50:05.913: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceed., 1)x(UNKNOWN_MESSAGE_TYPE (5)
*Jun 21 13:50:05.913: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
*Jun 21 13:50:05.913: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10. 0.3.2:5246
*Jun 21 13:50:05.954: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Jun 21 13:50:06.042: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
[code]....
Cisco Wireless :: Aironet 1142 Keeps Rebooting
Jul 27, 2011About every 20 minutes 12 of 300 APs keep rebooting. I have tried moving them to different controllers. I have tried downgrading the code and then upgrading the code. I have tried replacing the AP. I have tried swamping out cables. They are all connected to a 3750 stack but plugged into different switches in the stack. Here is the result that I could capture when I saw it disconnect from the controller. This is the output from the AP:
DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.100.40.212:5246
*Jul 28 14:33:19.595: %WIDS-5-DISABLED: IDS Signature is removed and disabled.
*Jul 28 14:33:19.597: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Jul 28 14:33:19.597: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Jul 28 14:33:19.655: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
[ code].....
I have removed the ip addresses for security reasons.
Cisco Wireless :: 1142 In Repeater Mode?
Jun 2, 2012I am a bit confused of the repeater functionality in the mentione AP, my concerns are:
1- Will each radio be dedicated to one function (for example 2.4 GHz for user access and 5.0 GHz for repeater functionality)?
2- Will the internet speed for users be affected when using the access point in repeater mode (no ethernet)?
3- Can an Autonomous AP function as a repeater?
4- Is there any license required?
5- What is the signal overlap requirements between the two Wired and non Wired AP?
6- Can the non wired AP be work as a repeater for another non wired AP (similar to cascading)?
Cisco Wireless :: 1142 Azimuth And Elevation In NCS
Mar 4, 2012I have recently been adding a number of installed APs to heatmaps in NCS and am very confused as to the correct Azimuth and Elevation settings.
In particular - if the AP is mounted on a wall rather than a ceiling what should the settings be ( and does it matter - perhaps - as NCS is now dynamic by default rather than the old WCS being predictive perhaps it does ).
Any guide for this covering the following common installation locations.
All referenced when looking at the map view in NCS, front of AP is the side with the Cisco logo and the status LED:-
1. AP ceiling mounted ( Backplate pointing out of map towards your eyes - front of AP pointing down to floor )
2. AP wall mounted ( front of AP pointing upwards towards the top bezel of the screen )
3. AP wall mounted ( front of AP pointing right towards the right bezel of the screen )
4. AP wall mounted ( front of AP pointing down towards bottom bezel of screen )
5. AP wall mounted ( front of AP pointing left towards left bezel of screen )
Cisco Wireless :: 1142 AP PoE Building Lab For CCNA
Apr 11, 2013After some searching I see many people using power injectors or switches that supploy PoE. I am building a lab for the CCNA Wireless and currently have an old Cisco 3550 PoE switch and a 2106 Controller that I got at a steal of a price. My question is, The 1142 can use the 15.4 Inline Power from the 3550 even though it is not the 802.11af standard correct? If it doesn't then I will need to order a power brick.
View 3 Replies View RelatedCisco Wireless :: IPad Not Connecting To AP 1142?
Jan 18, 2012I have an ipad that is not able to connect to a 1142 Autonomous AP. This AP was originally a light weight AP and then downgraded to autonomous.A strange thing i see is that the AP shows me only two radios. 802.11 N(2.4 GHZ) and 802.11 N(5 GHZ). I suspected the AP not to support the b/g networks. i then downloaded the most recent software but i still cannot get it to connect and on the AP's GUI i only see the above two mentionned radios. i tried to connect to two SSID's. one using WPA2 and another with open authentication and no security.but this does not work. Is it possible that some 1142 do not support b/g networks?
View 21 Replies View RelatedCisco Wireless :: AP 1142 - Clients Can't Connect
Dec 10, 2012What's wrong with this config ? Clients can see the wireless ssid's but cant connect.
View 1 Replies View RelatedCisco Wireless :: 1142 AP LED Flashes Green?
Aug 11, 2011I have 3 1142N AP's. I plugged them in one at a time here at my desk and they work fine. When I take them upstairs and install them only one of them works. I can move the working one to the other locations and it still works. The LED flashes continously green on the other two.
View 4 Replies View RelatedCisco Wireless :: 1142 - LAP Not Retaining Configuration
Aug 27, 2012I have some 1142-lap that i have to deploy in my office.
I have successfully deployed 5 out of 8 LAPs . Actually the LAPs was not discovering the controller automatically.
So i had to configure the Controller ip adress through the console in tha AP using the CAPWAP command. Then the AP promptly associates with the controller. Later on i configure the AP name - Primary , Secondary , Tertiary Controllers and everything else and saved it on the controller. This worked out well for the 5 LAPs that i had.
But started facing a peculiar problem with the rest three
As soon as i disconnect the AP from my desk and have it mounted on the celing , to my surprise if find that the LAP doesnt retain its configuration and also doesnt associate with the Controller.
Cant imagine what could be the issue.
I have been told that one CANT wite/save any configuration manually on tha LAP using the console, except by associating it with the controller. Is it a fault with the AP ( as the other APs are working absolutely fine)
Cisco Wireless :: Convert Capwap 1142 To Autonomous
Mar 28, 2012I have an 1142 running capwap c1140-k9w8-tar.124-23c.JA4 that I am wanting to convert to an Autonomous AP.However, the AP does not seem to have an archive exec command to tftp downoad an new IOS.Is there another procedure that should be used ?
View 7 Replies View RelatedCisco Wireless :: 1142 Aironet Won't Join Controller
Aug 6, 2012When I check the AP join statistics I see the following: Reason For Last Unsuccessful Attempt RADIUS authorization is pending for the AP, I don't run a radius server and don't know how to get around this so that the device can join.
View 4 Replies View RelatedCisco Wireless :: 1142 - Wi-Fi Speeds Fluctuating Rapidly
Nov 28, 2012We have approximately 150 1142 LWAPP's deployed in our facility. Recently we started getting complaints about speed issues (90% are using G 10% N). Upon investigating we found that the speeds are fluctuating rapidly. Everything from 54Mbps down to 1Mbps and back up again. I've confirmed that this will happen while standing next to an AP (and confirming connectivity to it), however I cannot find anything wrong or anything that has changed with our configuration. We are a large facility and it is happening all over the campus, so I'm fairly certain it isn't any type of 'normal' interference.
View 7 Replies View RelatedCisco Wireless :: Aironet 1142 And Webfilter Configuration
Jul 17, 2012I have an Aironet 1142 access point.
Is it possible to direct it to a webfilter hardware firewall for internet access. For example the IP of the firewall with webfiltering capabilties would be 192.168.0.1
We are hoping to provide customer wifi web access but need to filter what they can access.
Cisco Wireless :: 1142 - Network Not Seemed To Find Controller
Apr 18, 2012I've noticed that I've had to prime a lot of the 1142 devices. When attached to the network they not seem to find the controller. The subnet has the scope option and I have other 1142s working but recent ap's seem to not work unless primed.
View 3 Replies View RelatedCisco Wireless :: WLC 5508 / SW 6.0.199.4 / 1142 AP / Clients Getting Dropped?
Apr 14, 2013We have deployed a WLC 5508 w/ SW version 6.0.199.4, 1142 AP's & open authentication w/ MAC filtering. Clients are randomly getting dropped with "Limited Access" shown in Win 7. In this state, the client machine is unable to ping the gateway and sometimes lose their DHCP assigned IP as well. A manual disconnect/re-connect to the SSID is required everytime.I ran a debug on one the clients stuck in the "Limited Access" state (debug client xx:xx:xx:xx):
*Apr 15 16:59:23.205: e0:91:53:60:1f:e4 Adding mobile on LWAPP AP 3c:ce:73:c5:1e:b0(0)
*Apr 15 16:59:23.205: e0:91:53:60:1f:e4 Scheduling deletion of Mobile Station: (callerId: 23) in 5 seconds
*Apr 15 16:59:23.205: e0:91:53:60:1f:e4 apfProcessProbeReq (apf_80211.c:4722) Changing state for mobile e0:91:53:60:1f:e4 on AP 3c:ce:73:c5:1e:b0 from Idle to Probe
[code]....
Cisco Wireless :: Command To Save Config On 1142 LAP?
Dec 21, 2011I am trying to assign a static ip and default gateway to my LAP through the CLI, but after I reboot it, I lose the config and it reverts back to dhcp. Is there any command to save the config to the AP through the CLI? I've tried all I can think of (i.e. wr mem, copy run start, etc...) and have looked throught the available commands but cannot figure out a way to do it..
View 6 Replies View RelatedCisco Wireless :: Aironet 1142 Reset To Default
Aug 4, 2012I have a 1142 that I purchased that needs to be set to factory defaults so that I can configure it. I do an escape at the boot sequence and I get to the
ap:
prompt, the reset instructions that Cisco provides says that I should rename the old config.txt and reboot and that I will then be able to start my reconfig. The problem is that I can't find a config.txt file in the flash space:
Directory of flash:/
2 -rwx 260 Jan 1 1970 00:04:28 +00:00 env_vars
3 -rwx 112947 Apr 1 2011 15:17:10 +00:00 event.log
5 drwx 128 Mar 1 2002 00:01:54 +00:00 c1140-rcvk9w8-mx
9 drwx 256 Apr 1 2011 14:30:32 +00:00 c1140-k9w8-mx.124-21a.JHB1
8 -rwx 5144 Mar 1 2002 00:00:27 +00:00 private-multiple-fs
I checked in the directories listed above and still found no config.txt.
Cisco Wireless :: 1142 Keeps Downloading Image From WLC CT2504
Nov 2, 2012On the WLC I've set DHCP address pool, everything seems fine after ap download image -> reboot -> hit "Enter" to start blar blar blar... however, after a few second the WLC will initial upgrade image again and again. it's like a non-stop process.
Attached is the start up message, as you can see, i captured it after the ap successfully boot up, and WLC initial another cycle of image upgrade.
btw, my network is flat, WLC & AP all in the same network.
*Nov 3 06:28:30.788: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
examining image...!
extracting info (292 bytes)
[Code].....
Cisco Wireless :: 1142 AP Crashed Due To Software Failure
Apr 24, 2012I have an 1142 CAPWAP AP running IOS 12.4(25e)JA$ on a 2504 controller running 7.2.103 that's frequently reloading. NCS is reporting the reason for the reload as 'AP Crashed Due To Software Failure'. Other 1142 APs on the same controller aren't experiencing any problems. The AP is in H-REAP mode with local switching but central auth.
View 5 Replies View RelatedCisco Wireless :: Aironet 1142 Not Broadcasting SSID?
Sep 28, 2012I configured the device manually, not even using Express Setup or Express Security setup so... it is possible I missed something.Anyway, here's the problem. Although the SSID is configured as "AP1", this SSID does not appear among available networks on the client laptop.
The connection, configured in Group Policy for the client, should actually happen automatically, based on the SSID, but since the SSID is not being broadcast, that connection is failing as well.
The Aironet does appear among the available networks as "Other Network" and if I click on "connect" I am prompted to enter the SSID -> AP1
Although, unexplicably, an error message displays (Windows cannot connect to the network, or something to that effect), the laptop *does* connect once I close that window. Network access is complete and functional - I can ping other hosts, etc..
I'd post screenshots but not knowing what setting is missing or incorrect, I'd have to print dozens. So here's the sh run output of the AP obtained via telnet (just below). This is a test network so all information is "real" (nothing changed for privacy):
Note: I even changed the hostname to "AP1" (it's still LAB1 below) but that did not resolve the problem (did not think it would).
LAB1#sh runBuilding configuration...
Current configuration : 2321 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname LAB1!logging rate-limit console 9enable secret 5 $1$9EWD$kxrbg8KxikRFypOieKiZh/!aaa new-model!!
[Code]....