I have to upgrade a couple of 4400s to support 1142 APs. The controllers currently support 1131s, and are on version 4.0.179.11. (I know, way back there...)
Seeing this huge gap between the level we're on and the most current version, thought I'd better find out what's recommended.
The available MD versions are 4.2 and 6.0
The available 4.2 versions are:
4.2.209.0(md)
[code]....
The next MD release is 6.0.202.0 .
I current have 20 x cisco AP 1142 with WLC 4400 series, I'm looking for newer/latest Cisco AP for expansion. I was looking at Cisco 3500 series but not sure how good/flexible they are when comparing to 1142 and other AP series.
View 1 Replies View Relatedthat cisco ap 1142 will support WLC2506 or not .
View 2 Replies View RelatedWe have two 4400 controllers which support 50 Access points each and wcs with 100 base license.Now we added 5508 controller supports 50 access points.wcs is upgraded with another 50 ap license.The 5508 controller is joined to wcs and the licence showing permanent.WCS showing all aps and showing both 100 and 50 licence as permanent.But the issue is while loging into the wcs it showing the error message as"The system is in violation of license.The number of APs registered is greater then licensed."
View 5 Replies View RelatedI want to upgrade all my controllers (a mix of 4400 and 5508) to 7.2.103.0 from 7.0.116.0. Can I make that jump or should I do incremental?
View 7 Replies View RelatedI want to upgrade software of the {WISM(Forign controllers 6.0.196) 4400(Anchore controllers 6.0.196) and WCS 5.2.0} to 7.0 code for all,
View 1 Replies View RelatedAfter upgrading from a 1231 autonomous to an 1142 autonomous AP some machines can no longer authenticate. AP logs show authentication failure and access reject coming from the Radius server. Radius server shows authentication failures but no specific reason. Using the same account on another machine works fine. Machine settings have been verified and if we go back to the 1231 all users authenticate fine. Below are the configs:
OLD AP:
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone
service password-encryption
[code]...
im guessing there is zero chance of a firmware upgrade for the SRP527W to support more usb devices is there?
View 1 Replies View RelatedIPV4 IP addresses will be running out in less than a year and I wanted to know, will there be a firmware update for WRT120N to support IPV6?
Also, if I have to buy another router to support IPV6, I'm going to buy a D-Link. It's nothing personal, I just find it absolutely idiotic that a router that supports wireless-N doesn't support IPV6. You have to ask your self, how does the standard IPV6 spec thats a few years old not make it to the final product of a router, but a non-standard wireless-N spec implementation somehow got the O.K....?
I have a Cisco E1200 router that is currently running firmware version 1.0.03 build4 Mar 1, 2012. Can I upgrade to the latest version 2 firmware ? How do I know if my router hardware will support it ?
View 4 Replies View RelatedI want to upgrade my DRAM of 256MB to 512MB to support 15.1 IOS image.Can I buy Cisco approved DRAM from third party Like [URL]
View 1 Replies View RelatedI found [URL] that it's possible to create IPSec between WLC and MS IAS server. Is it possible to use ACS 5.2 instead of IAS and establish IPsec between WLC and ACS?
View 1 Replies View RelatedWe have a Cisco 4400 series WLAN controller.When I go to the clients and view who is connected; I can also filter it. However it only lets me filter by mac address, ap, wlan profile, etc.
It does not have IP filtering. Is there a way to filter using IP? Basically I want to find a particular client with a certain IP that's connected to our WLAN.Also how do we block the client? If we deemed that person should not get access.
We have a single 4404 that was setup long before I arrived with Guest networks that timeout and other such tweaks. Is there a document somewhere that shows a way to migrate the old settings to a new 5508 that we are purchasing? By the time the 5508 arrives I will have a very small window to setup the unit before a new wing goes live. I need the new unit as we have reached our limit of licensed AP's on the old 4404. It seems like everyone keeps talking about an easy way but no one says how to do it.
I have never setup one of these units before from scratch so I don't know how long it will take.
Does WLC 4400 is supported in LMS 4.1 in CiscoView.
When I check device update in admin-system-software center. I don't see any available package for the WLC 4400.
We have a new SSID that needs to be added to an AP through a 4400 Controller with software version
7.0.116.0
All AP's are configured as Lightweight.
I am configuring an old WLC4400 with V4.2.130.0. I added a new sub-interface for VLAN 50 with proper IP for the subnet and then add the Radius server(Windows server 2008 with NPS) onto WLC4400. I then created new WLAN with WPA+WPA2 Encryption and 802.1x key management and selected the Radius server under AAA for authentication.
Configured the test XP with WPA-Enterprise and PEAP as EAP method. I purposely configured computer to prompt for username and password.
When I try to connect, I did get prompt for username and password. However after that nothing happens. It seems like laptop just keep trying to authenticate.
I checked windows event log and do not see anything under NPS. I know this windows server NPS setup works as it is also the authentication server for our remotevpn.
is there any special option I need to turn on for WLC in order for Radius authentication work? Or is there any known bug with V4.2.130.
I am replacing an old 4400 series WLC running version 4.0.179.11 to a new 5508 WLC running version 7.2.110.0.
We currently have 70 x 1131 Access points on the 4400 WLC.
With this upgrade, do i need to upgrade the old 4400 to version 6.0 so the AP's get an up to date IOS or can i directly migrate all AP's over to the new 5508 without any version incompatabilities on the AP's?
I am abit worried that the AP's are running a very old IOS on the 4400 v.4.0.179.11 to go straight to the new 5508 v.7.2.110.0.
l need change a wlc 4400 to 5500, but l don´t know what l need back up, and how can I do to join the H Reap APs in the new 5500 WLC because all H Reap APs that l have, are not in the same city , and I understand if l want join AP in the new WLC l need to connect in the same network segment, is it rigth ?
View 7 Replies View RelatedI have some problems integrating WLC 4400 with AD using ldap. The the WLC LDAP Server and W LAN for Web Authentication are configured according to [URL].
when I connect to SSID the laptop is given the ip address, then I can see the web-page with lo gin and password - it seems to be OK, but when I enter lo gin and pass it tells me, that it's incorrect.
The attributes of the LDAP server:
Server Address *.*.*.*
Port Number 389
User Base DN ou=ORG,dc=domain,dc=local
User Attribute userPrincipalName
User Object Type Person
the test user is located in AD folder ORG, but this folder also contains a lot of sub trees
There are some questions:
1) Is it obligatory to use value "Authenticated" in the Simple Bind option or it can be Anonymous?
2) Is the Controller capable for searching the users located in User Base DN sub trees?
Here is some debug from the controller:
667: LDAP_CLIENT: UID Search (base=.....
669: LDAP_CLIENT: ldap_search_ext_s returns 0 85
669: LDAP_CLIENT: Returned 1 msgs including 0 references
[Code]....
I have a 4400 WLC for 100APs running the 7.0.98.0software version. Now, only 48 APs are joined, and the WLC dont accept new joins. The log below are from my WLC but appear for all others APs:
%LOG-6-Q_IND: spam_lrad.c:1440 Discarding discovery request in LWAPP from AP 00:3a:98:ae:e3:f0 supporting CAPWAP%LWAPP-6-CAPWAP_SUPP_VER: spam_lrad.c:1440 Discarding discovery request in LWAPP from AP 00:3a:98:ae:e3:f0 supporting CAPWAP%CAPWAP-3-TX_ERR: capwap_ac_sm.c:1966 Failed to transmit discovery response to AP 00:3a:98:ae:e3:f0%CAPWAP-3-ENCODE_ERR: capwap_ac_sm.c:2269 Failed to encode Discovery (code)
I have Cisco AP 1142 standalone and I want this one to operate with WLC.
I have searched in Google, they said I need to upgrade AP1142.
I don't know how to upgrade it.
i have a problem using my usb to serial cable connection, i can connect to one router on my work, but i can't connect to AP 1142, (i have tested also con AP 1231).i have a laptop running windows 7 64 bits, before i use a win xp 32 bits, and i didn't have problems.i am using putty, and have installed tera term 4.74 but the same.connection details, 9600, 8, 1, N, N.
View 5 Replies View RelatedI am in the process of deploying an additional Cisco 1142 AP into my network. I would like to set it up to be the same SSID as the first one, and be able to have laptops roam from AP to AP. I am simply trying to expand the current coverage of my wireless network. I have both APs mounted and access to both.
-CISCOAP01 - 192.168.2.2
-CISCOAP02 - 192.168.2.3
What do I need to do (configre) to make this happen? I am rather new with Cicso. I am using the web interface to setup the APs. The first one has been up and running for about a year now with no problems. [code]
I can't get connectivity from laptop to AP using cross over or straight through cable to do a tftp transfer from tftp server on laptop to ap.
I held the mode button on ap and powered on to get to rommon. The ap has no ios so it goes to rommon anyway. ap light is blinking red.
ap: set
DEFAULT_ROUTER=10.0.0.1
IP_ADDR=10.0.0.1
NETMASK=255.255.255.224
[Code].....
After AP is booted it shows the following message and cannot able to join in WLC:
*Mar 1 07:13:37.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.71.16 peer_port: 5246
*Mar 1 07:13:37.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
[Code].....
i have a existing wireless network setup in my office existing wlc in 4402 and LAPs are 1130 & 1242 all are working fine but we are now planning to use new 5500 series controllers for the same access points,i want to ask that how i can done this job with very minore downtime and users disconnectivity + zero error results??
View 2 Replies View RelatedWe have a WLC4400 controller with about 30 LAP. We moving to a new IP scope and was wondering what is the best way to change the IP address of the controller. We have tried doing this via GUI however we have to power cycle the controller to get it back online using the old ip address.
View 3 Replies View RelatedWhat is the best way to isolate hosts on WiFi network managed with 4400 controllers so they only see def gw but not each other, something like "switchport protected" but for WiFi ....
View 4 Replies View RelatedLike the way you do with the Cisco IOS.
ie show start | i router
Managed to guest LWA working with ISE for wireless guest portal access? I have Cisco 4400 WLCs running latest 7.0 code and ISE 1.1.2.All guest portal examples seem to be CWA which only works on 7.2 code.Am I without hope getting this working on 7.0 code?
View 3 Replies View RelatedDoes CSCua29504 affect 4400 series WLCs as well? Bug toolkit mentions just 5500, so want to get a confirmation.
View 2 Replies View RelatedI have just upgraded one of our 4400 to 7.0.98.0. Most of the AP re-registered with out issues. I have two AIR-LAP1142N-E-K9 on a remote site that will not re-register.I have pointed them to another 2125 WLC (7.0.98.0) and they register fine. Point them to yet another 4400 (7.0.98.0) I get the same issue.I am getting this error when the register on the 4400s.*Jan 11 14:39:24.000: %CAPWAP-3-ERRORLOG: Selected MWAR 'abzewwlc'(index 1).*Jan 11 14:39:24.000: %CAPWAP-3-ERRORLOG: Go join a capwap controller *Jan 11 07:05:55.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 144.46.211.5 peer_port: 5246*Jan 11 07:06:55.000: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 144.46.211.5:5246 I suspect it may be as they both have In the client config.Then again maybe not.Configured Switch 1 Addr 158.139.177.203Configured Switch 2 Addr 144.46.214.25
Question 1 if I do a "clear config except static IP" will I still be able to telnet tp them or will they default to no telnet no ssh ?
Question 2 any idea how to get past this DTLS error ?