Cisco :: 4400 DTLS Error AP Will Not Register
Jan 12, 2011
I have just upgraded one of our 4400 to 7.0.98.0. Most of the AP re-registered with out issues. I have two AIR-LAP1142N-E-K9 on a remote site that will not re-register.I have pointed them to another 2125 WLC (7.0.98.0) and they register fine. Point them to yet another 4400 (7.0.98.0) I get the same issue.I am getting this error when the register on the 4400s.*Jan 11 14:39:24.000: %CAPWAP-3-ERRORLOG: Selected MWAR 'abzewwlc'(index 1).*Jan 11 14:39:24.000: %CAPWAP-3-ERRORLOG: Go join a capwap controller *Jan 11 07:05:55.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 144.46.211.5 peer_port: 5246*Jan 11 07:06:55.000: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 144.46.211.5:5246 I suspect it may be as they both have In the client config.Then again maybe not.Configured Switch 1 Addr 158.139.177.203Configured Switch 2 Addr 144.46.214.25
Question 1 if I do a "clear config except static IP" will I still be able to telnet tp them or will they default to no telnet no ssh ?
Question 2 any idea how to get past this DTLS error ?
View 4 Replies
ADVERTISEMENT
Dec 25, 2012
I have a WLC 5508 and several 1142 access points. The APs are not showing up in the WLC. When i console into the APs, im getting the following errors,
*Dec 26 23:04:28.035: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 65.125.15.212:5246
*Dec 26 23:04:28.074: %CAPWAP-5-CHANGED: CAPWAP changed state to
[Code]....
Ive tried resetting the WLC, reloading the APs. I even factory defaulted one of the APs and still getting the same message.Ive verified that the WLC is set to accept MICs and SSCs.
View 6 Replies
View Related
Dec 26, 2012
I am using PC to mobile dialer. It was working fine but now I am unable to login to my wowcall account due to error - Unable to register to SIP server.
View 1 Replies
View Related
Oct 30, 2012
Received Error:Object "Dot11BandSelect" does not exist. when configuring the 802.11 settings on a 4400 WLC runing ver. 6.0.196.0
View 1 Replies
View Related
Apr 4, 2012
I have an ASA 5510 running 8.2.2 code with 30 VPN Phones connected. Of the 30 phones, I have 5 that do not negotiate DTLS and I'm having quality issues with these phones. I've checked the login process and I don't see any errors when these phone connect, they just don't even attempt DTLS. All the phones use the same VPN configuration.
View 4 Replies
View Related
Sep 17, 2012
My work laptop uses a Cisco AnyConnect VPN Client (Software Version 2.5.2006). The connection protocol is DTLS.I recently upgraded to a Cisco RV180 at home at it is running the latest software version (1.0.1.9).
Since the RV180 went into service the work laptop will connect intermittantly. Usually email works but web browsing and and other services do not. It is slight strange behaviour- and seems to defy what a VPN should do......
The behaviour is very repeatable. For example from the customers office the laptop connects perfectly via VPN and if I swap back to an older inferior make of router at home VPN also works normal without changes to the laptop configuration.
I work for a large company (70,000+ employees) and we use "standard" builds so altering the laptop configuration is not really an option.
It seems to me that the RV180 doesn't support the DLTS VPN connection (indeed DLTS passthrough isn't an option in the VPN passthrough list) and is possibly blocking some incoming packets on the WAN interface.
I haven't yet tried a firewall rule to allow a DLTS (or UDP perhaps?) connection back in from the WAN side (obviously from just the IPs at my work end) but this is the only option I can think of to make this machine connect "correctly".
View 3 Replies
View Related
Nov 25, 2012
I've been labbing on my asa5505 at home, setting up different VPN solutions for testing purposes. However, I can't get my anyconnect client to establish a DTLS tunnel when connecting (anyconnect only shows tls, and does not display any errors about not connecting with dtls)I have set dtls port to 444 and this port is open on the other side.
View 2 Replies
View Related
Feb 21, 2011
WLC 5508 running 7.0.98.0
Site was running fine until the WLC had a hardware failure.
A new WLC was shipped out, was running 6.0.99 then manually upgraded to 7.0.98. Clients cannot authenticatewith recurrent logs messages like this.
*dot1xMsgTask: Feb 23 17:05:03.648: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2914 Max EAP identity request retries (3) exceeded for client 00:21:5c:<snip>*spamApTask0: Feb 23 17:05:01.926: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:629 Failed to complete DTLS handshake with peer 192.168.214.91
I have tried changing the key on the radius server to no avail.
View 4 Replies
View Related
Jan 18, 2013
I am setting up office extend with 1142 APs on a 5508 controller. All seems ok and I see my SSIDs on the remote AP. However when I try to connect I don't get a dhcp address and the connection fails. When I look at logs and some debugs I see dtls keepalive failures and the AP is actually disconnecting and re-associating with the controller.
View 24 Replies
View Related
Jun 17, 2012
Flex 7500
Software Version: 7.2.103.0
I have a Flex 7500 with 200 1142AP's working fine in remote office and local setup. We have since purchased 3 OEAP 602's and looking to distribute to teleworkers.
I have configured the OEAP to point to the NAT'd IP of the WLC, the OEAP does connect and is listed briefly in the WLC wireless listing but I am not able to make any configuration changes, it will then dissassociate and try the join process all over again. I have attached below the OEAP 600 event log. I see that the WLC does not support data DTLS encryption and looking to make this work.
I have tried to install the DTLS license file from the Cisco website, but says license failed to install, with no other errors.
*Jun 18 15:18:43.938: Build version 7.0.112.72 (compiled Feb 3 2012 at 01:56:39, [L]).
*Jun 18 15:18:47.859: CAPWAP State: Init.
*Jun 18 15:18:47.860: CAPWAP State: Discovery.
[Code]....
View 2 Replies
View Related
Mar 7, 2011
I need to run a windows hyper terminal program between my POS register which has a serial RJ11 port to my PC db9 male port
View 2 Replies
View Related
Feb 6, 2007
I have tried the config-register command and it is not available. Here is part of the show ver command. I want to change the config-reg from 0xF to 0x2102.I have run into this before but don't remember how to correct it.....I think I have to use the boot command but not sure. Here it the output show ver Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)FX, RELEASE SOFTWARE (fc4)
System returned to ROM by power-on?System image file is "flash:c2960-lanbase-mz.122-25.FX/c2960-lanbase-mz.122-25.FX.bin"cisco WS-C2960-24TT-L (PowerPC405) processor (revision A0) with 61440K/4088K bytes of memory.last reset from power-on
4 Virtual Ethernet interfaces
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.64K bytes of flash-simulated non-volatile configuration memory.
Model number : WS-C2960-24TT-L
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C2960-24TT-L 12.2(25)FX C2960-LANBASE-M
Configuration register is 0xF
View 6 Replies
View Related
Mar 30, 2011
I'm having troubles with a cisco 877 router, it keeps changing itself to either 0x2101 which is good, or to 0x3100 which is bad because it messes up my bautrate to 1200 instead of 9600.it doesn't seem to matter if I change it, it will still tell me that it will change at next reload. [code]
I have never seen this before.the command in conf t : configuration-register 0x2101 is not working, played with wr mem or copy start run neither of one useful.
View 5 Replies
View Related
Feb 21, 2011
Whenever I go to sites like godaddy.com or mydomain.com to register a personal domain, they only offer me sites like url...What can I do? Computers have lots of memory but no imagination..
View 1 Replies
View Related
Jul 11, 2011
We have a few remote sites that connect back to HQ with T1 & DMVPN (Cable/DSL) for data. Our CM Publisher/Subscriber reside in HQ. We recently installed FXS cards in these routers to provide Fax functionality to our remote sites since we will be removing some POTS lines.
Can we register the 2811 as a voice gateway (I am thinking MGCP as with VG224's we have in production) and have it handle faxes with FXS card as well as route data or will we need a separate device for this?
View 3 Replies
View Related
Mar 30, 2012
I am trying to implement a small VoIP LAN (you can see the lan in attachments)for a personal project. I am using:
- 2 x XP (on which i installed Cisco IP Communicator 7.0.3.0)
- 1 x Ubuntu (running GNS3 with a c3600 Router)
The problem is that the phone which is not in the same LAN with the tftp server cannot register.
1) Can a phone register to a tftp server from another LAN ?
2) If the answer for 1) is yes, what am i doing wrong (you can see the details in the attachments)? I mention that the ping works well anywhere in the LAN.
View 11 Replies
View Related
Jun 1, 2013
I am having two 6509E working in VSS and both are working fine. But the configuration register of command "remote command switch show boot" is 0x8000 which is different from that of RP (0x2102) .Now i want to change the value of configuration regsiter of SP to 0x2102.
View 1 Replies
View Related
May 17, 2012
I do get this error all the time on my WLC 4402 logs:
"Could not Register IP Add on MSCB. MSCB still in init state. Address:e4:ce:8f:13:e4:de[...It occurred 2 times.!]"
View 4 Replies
View Related
May 15, 2012
i have out of box 20 AP 1100 LWAP...and cisco 22XX WLC......i need few information
1- what is option 43 in DHCP once i take the AP out of box shd i config static IP for managment
2- How LWAP register to WLC?
View 1 Replies
View Related
May 8, 2013
I have cisco WLC 5508 on the HQ, now I have another site in different subnet I tried to put AP on it and configure a DHCP pool with option 43 but the AP failed to register the WLC on the HQ.
View 13 Replies
View Related
Sep 13, 2012
Facing a unique problem in my cisco Router (2811) .. Router is well configured but suddenly it stops working , when logged in using console the configuration register is observed to be 0x2142.
How does it automatically changes register value during operation?
View 4 Replies
View Related
Jul 6, 2011
I am implementing Cisco Network Access Control with Wireless Controller 5508 (WLC5508 below) . Could you tell me how to register WLC5508 as SNMP Agent for Cisco Access Manager (CAM below) ?
[System Information]
IOS version of WLC5508: 7.0.98.218
Version of CAM: 4.8.0
[Code]....
I succeeded to register WLC5508 by using IP address of Service Port on the CAM Web Console. But WLC5508 has only one Service Port, which has no redundant port. I want to register it by usin Management Interface, which has backup port. It is also desirable to implement redundancy of Service Port if possible.
View 2 Replies
View Related
Jun 13, 2012
I have just purchased SLM2016T-UK (SG200-18) and trying to register the warranty online (was told by the reseller to do so) but I can't find any link direct me to the correct site.
View 4 Replies
View Related
Dec 6, 2011
I have installed 2 ACS 5.2 appliances, the two appear as Primary. When I try to register one of them with the other one using "System Administrator -> Local Operation -> Deployment Operations" I get the following message:
This System Failure occurred: Unable to authenticate with node.. Your changes have not been saved.Click OK to return to the list page.
I have tried with both "ACSAdmin" and "admin" users with their respective passwords.
View 3 Replies
View Related
May 18, 2013
I am developing CAP1602I & 2500 Controller.The CAP1602I-E-K9 can't register with the 2500 controller. [code] logging appears: capwap can't process uncryped data..I even didn't configure capwap on CAP1602.May I know if CAP1602 doesn't support LWAPP? Why LWAPP doesn't work?According to the logging, I also tried to configure the "Data Encryption" on 2500 controller ( according to 7.0.116.0 guide)
"Cisco 2500, WiSM2, WLC2—By default, these platforms do not contain DTLS. To turn on data DTLS, you must install a license. These platforms have a single image with data DTLS turned off. To use data DTLS you will need to have a license."Note If your controller does not have a data DTLS license and if the access point associated with the controller has DTLS enabled, the data path will be unencrypted. I should purchase a license? or, if I can configure the CAP1602I to don't encrypt data?
View 10 Replies
View Related
Jul 15, 2012
Not able to register AP Point < Air-Cap35021-E-K9 > on 4402 WLC running IOS (AIR-WLC4400-K9-7-0-235-0 ) Other AP already registered on the WLC are AIR-LAP1242AG-E-K9 & AIR-LAP1131AG-E-K9.
View 13 Replies
View Related
Oct 29, 2011
We have found that only Cisco 1231 WAP are exhibiting this behaviour. Their Primary WLAN controller is Cisco1 WLC but they fail to register to Primary WLC and fall back to Cisco2 WLC. After about 200 sec , they attempt to connect to Primary WLC once again and fail. The whole cycle is repeated every 250 seconds.
View 3 Replies
View Related
Jan 14, 2013
I have 2504 WLC with 1142AP. Currently i am starting the deployment. today when i was registering my first AP to WLC. WLC starts rebooting continuously..without any AP registration its stable and i can access the GUI.
WLC2504 : 7.2.103.0
AIR-LAP1142N-E-K9: Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 12.4(25e)JA, RELEASE SOFTWARE (fc2)
View 3 Replies
View Related
Jun 11, 2012
Today I ran a failover test between our primary and secondary ACS systems (ran 'acs stop' on the primary) and in the process decided to promote the secondary while I had the primary down. All was fine until I brought the primary back up and tried to re-register the secondary to it. I get the following error message: I went into System Administration >Operations >Distributed System Management on each and it showed the other device as deregestered, tried to promote from there but it failed too, so I deleted them and tried to register the secondary again. After that didn't work I tried rebooting both but that didn't work either. I know the user/pass I'm using is good and I've tried using both the IP address and the hostname.
ACS/admin# sh app version acs
Cisco ACS VERSION INFORMATION-----------------------------Version : 5.3.0.40.5Internal Build ID : B.839Patches :5-3-0-40-5
View 3 Replies
View Related
Jun 5, 2012
Need to confirm on 4507 R switch should i set config reg to 0x2102 or 0x2101?
View 4 Replies
View Related
Dec 12, 2012
We have a 5508 controller that manages AP's at approximately 20 branches - each branch has their own subnet. We have a single branch (subnet) with new 2602 AP's that will not register with the controller. All communications to this subnet appear normal and there are no ACL's in place between the AP's and the controller. The AP's are able to resolve the controller IP address via DNS and begin the registration process but then timeout. We have successfully installed 2602 AP's at other branch locations and they register with no problems - this is only a problem at a single branch. I've attached some debug messages below for a single AP (this is a production environment so I parsed un-necessary info) and also included the console messages from a different AP (the console messages on the AP's are the same). There are currently 9 AP's at this location and none of them will register.
Debug Capwap Events:
*spamApTask0: Dec 11 14:39:32.904: 44:2b:03:9a:d1:10 Discovery Request from 10.29.9.190:44306
*spamApTask0: Dec 11 14:39:32.904: 44:2b:03:9a:d1:10 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 300, joined Aps =272
[Code]......
View 28 Replies
View Related
Oct 15, 2012
We currently have about 50 Cisco 1252 wireless access points running from a 4404 Wireless LAN controller. We need to order more APs, but of course the 1252s have been discontinued.Was assured by Cisco that the 1262 would work just fine with our WLC. I'm messing around with a trial 1262 and am running into problems.We hard-code the IP address, hostname, default gateway, and controller IP address in each of our access points. I did that with the new 1262 the same way I did with the 1252s:lwapp ap ip address lwapp ap ip default-gateway etc., etc.That didn't work. Then I tried doing the same thing using (not sure if this is the correct terminology...) the capwap commands.
The AP still doesn't show up on the WLC's GUI, though I can ping the AP from the WLC and I can ping the WLC from the AP.I also can't use a web browser to get into the access point's configuration tool. Do I understand correctly that the lightweight APs don't have the GUI?
View 4 Replies
View Related
May 27, 2013
\We have purchased AP 1041 and WLC 2500 and I am doing a testing on the configuration. It is fine when both AP and WLC are sitting on the same network. However, if I connect the AP to the WLC which is on another network, I found that latency is quite high when PING the gateway. Here is the brief topology.
AP (172.30.40.212) ------- (VLAN 1: 172.30.40.202) switch (VLAN 2: 172.30.41.202) ----------- (172.30.41.210) WLC
I try to plug the PC to VLAN 1 and do a PING test to the VLAN 1 interface and it causes some packet loss and high latency. [URL] If I do the debug ip udp on the AP, it seems the result is normal.
*May 28 13:53:36.951: UDP: sent src=172.30.40.212(26610), dst=172.30.41.210(5246), length=1069
*May 28 13:53:36.952: UDP: rcvd src=172.30.41.210(5246), dst=172.30.40.212(26610), length=89
*May 28 13:53:36.953: UDP: sent src=172.30.40.212(26610), dst=172.30.41.210(5246), length=685
*May 28 13:53:36.954: UDP: rcvd src=172.30.41.210(5246), dst=172.30.40.212(26610), length=89
Configuration:
AP 1041 Version: 15.2(2)JB
WLC 2500 version: 7.4.100.0
Both device are configured the static IP address manually with default setting and I do not enable DHCP option 43.
View 1 Replies
View Related
