Cisco :: Can A Phone Register To Tftp Server From Another LAN
Mar 30, 2012
I am trying to implement a small VoIP LAN (you can see the lan in attachments)for a personal project. I am using:
- 2 x XP (on which i installed Cisco IP Communicator 7.0.3.0)
- 1 x Ubuntu (running GNS3 with a c3600 Router)
The problem is that the phone which is not in the same LAN with the tftp server cannot register.
1) Can a phone register to a tftp server from another LAN ?
2) If the answer for 1) is yes, what am i doing wrong (you can see the details in the attachments)? I mention that the ping works well anywhere in the LAN.
View 11 Replies
ADVERTISEMENT
Jan 8, 2012
I have a questions on an Ip phone when getting the firmware from the TFTP server (e.g. CME) after bootup,- After the registration with CME, the IP phone will getting an auto config file which is the Default.xml file. - The CME will acts a a TFTP server which contains all the IP phone's firmware for different models like 7970 and 7640 in different directories.- The CME have configured with the directory path for all the IP phone when the IP phone come to TFTP and acquired the firmware.Let say I have a phone registered is 7970 and what is the mechanism that governs that my 7970 is not downloading the wrong firmware from the TFTP? Let say it might wrongly downloaded the 7640 firmware? Who take care of this? The phone itself? or the CME will tell the IP phone to take only the 7970 firmware via the Default.xml file?
View 1 Replies
View Related
Jan 31, 2011
I have to sites connected togather using 4 MBps Link over the tunnel terminated on asa 5510,the call manager in site 1 and the other users on the site 2 unable to register with call mamager on site while i have a suceesull ping goes from site 2 to site 1 (call manager ip) so why this phone its not registered ,so in term of network no problems coz the ping gets through and am rely on ping to confirm that no network problem
----is there any udp traffic problem that prevent the phone registration
View 20 Replies
View Related
Aug 23, 2011
We have Cisco ASA 5505 with ASDM 5.2 We have one Proxy server in our Local Lab and pointed to Hosted service(Simple Signal)issue is, When our proxy server send register to hosted server, ASA change private IP and post with outside IP and src port as 1063 every time.
Here is debug log on real time monitoring.
Aug 24 2011 05:21:19 302015 203.xxx.xxx.226 192.168.1.51 Built outbound UDP connection 3774 for outside:203.xxx.xxx.226/5060 (203.xxx.xxx.226/5060) to inside:192.168.1.51/27014 (99.119.161.107/1142)
Aug 24 2011 05:21:19 607001 203.xxx.xxx.226 Pre- allocate SIP Via UDP secondary channel for inside:192.168.1.51/27014 to outside:203.xxx.xxx.226 from REGISTER message
Aug 24 2011 05:21:19 710005 203.xxx.xxx.226 99.xxx.xxx.107 UDP request discarded from 203.xxx.xxx.226/5060 to outside:99.xxx.xxx.107/1063
Here 99.xxx.xxx.107 is Our ASA Outside IP address 203.xxx.xxx.226 is Hosted server IP address. My ASA config is attached.
View 2 Replies
View Related
Dec 26, 2012
I am using PC to mobile dialer. It was working fine but now I am unable to login to my wowcall account due to error - Unable to register to SIP server.
View 1 Replies
View Related
Nov 5, 2012
We have a LMS 4.2 installed. And I see the tftp port is open on it. however, every time, i tried to "copy running tftp" to the LMS from a switch, it says the Trying to connect to tftp server Connection to Server Established.TFTP put operation failed:Access violation
i seem not be able to find where to configure the tftp server.
View 2 Replies
View Related
Dec 24, 2010
There is one router ( SWR54BGA ), wan interface functional ( connected as a dhcp client to the lan interface of another router , packets are forwarded). When i connect the wan interface to the isp line, and provide the pppoe login details ,it won't work. When i try to connect manually to the pppoe server from the wan configuration page, after about 30 sec i get the connection failed message.Is the firmware corrupt, should i go the ddwrt route?
View 2 Replies
View Related
Oct 4, 2011
Is there a way to backup the configuration file to a tftp server? I've tried "copy start tftp" and copy run tftp". No luck, I get an error message.
View 1 Replies
View Related
May 29, 2012
ow to backup Cisco ASA-5510 from a Linux server via TFTP?I do know how to backup a switch or a router. Basically creating an access list such as:
access-list 55 remark PERMIT hosts requesting TFTP access
access-list 55 permit host 172.16.0.27
and allowing access to
tftp-server nvram:startup-config 55
all this inside the router or the switch. From the Linux box just running a simple command such as:
tftp 172.16.0.3 -c get startup-config newbackup.conf
where 172.16.0.3 is the IP address of the switch and newbackup.conf is the name of the config file stored on the Linux machine.So, how do I do that with an ASA box? how to backup ASA from inside it.
View 1 Replies
View Related
Mar 11, 2003
I need to do one Catalyst 5500 as a TFTP server.Can I do it?Is the catalyst available to be a tftp server?
View 4 Replies
View Related
Feb 3, 2013
How do i go about setting up a TFTP server from laptop to Cisco ws-C3750 48P Switch, I need to pull the image off the switch and place it on an other switch that has a corrupt image, The switch which is corrupted is the same as above Cisco ws-C3750 48P.
View 1 Replies
View Related
Nov 15, 2012
I am trying to convert two Aironet 1141n access points to autonomous stand-alone units. I have connected the console cable and I can see the unit giving information in the console window, but I cannot type any commands. When I try to get the unit to upload the c1140-k9w7-tar.default file by holding the mode button in for 20-30 seconds, it shows it is examining the file, and then states that the connection to the tftp server has timed out. My windows firewall is off, the interface is configured as 10.0.0.2 255.255.255.0 and the tftp server is showing that.
View 15 Replies
View Related
Aug 26, 2012
I have been trying to get a PIX 501 firewall reset and have been having the hardest time. Im a student and this is my first experience with a firewall. I have been going through the steps here URL,I cant seem to connect to the tftp server, I have several nic's on my computer and tried them both and even plugged the firewall to the router and tried to use the gateway to connect but it doesn't seem to want to even ping for me.
View 4 Replies
View Related
Oct 21, 2012
I have been looking at grading the IOS version on our 6509-E however there is not enough space on disk:0 to upgrade to the version I need to install. The question I would like to ask is - is it possible to boot the IOS from a TFTP server? If this is possible what configuration do I need on the 6509 to enable this. How does the 6509 know about the TFTP server as an IOS is not installed and therefore it will not have a network configuration
View 2 Replies
View Related
May 24, 2012
I have a Cisco 831 router (c831-k9o3y6-mz.124-5c.bin) that cannot backup the config to a local tftp server. I have seen this behavior on a few different Cisco devices over the years and have never found a solution. The connection is made to the tftp server (in this case tftpd but similar behavior on any tftp server) and a blank file is created on the target machine file system, but the data is never transferred.
The router shows %Error opening tftp://192.168.0.2/router-confg (Timed out) [Failed]
The tftpd log shows 5 repeated attempts at the file write.
Connection received from 192.168.0.1 on port 53570 [25/05 11:56:40.922]
Write request for file <router-confg>. Mode octet [25/05 11:56:40.922]
Using local port 61607 [25/05 11:56:40.922]
<router-confg>: rcvd 0 blk, 0 bytes in 3 s. 0 blk resent [25/05 11:56:43.922]
Connection received from 192.168.0.1 on port 53570 [25/05 11:56:43.923]
[Code]...
This is also stopping me upgrading the image on the router as I cannot transfer in the other direction either.
View 1 Replies
View Related
Jan 15, 2012
I wonder if dir825 with ddwrt firmware are able to set up additional tftp server? I try to serve dir825 both as tftp server and dhcp server to allow remote client to have pxe booting from it. ( the booting image file would be located in external HD attatched to dir825's usb port )
View 1 Replies
View Related
Apr 12, 2012
I need to transfer a config from a TFTP Server to a 4507 and a 6513. When I transfer the config to both those switches, does it require a reboot?
View 5 Replies
View Related
Apr 29, 2013
I am trying to copy IOS from my TFTP server which is on my laptop to cisco 2960 switch
I am able to ping to switch from my laptop, connectivity is fine, tftp server is running
Current Image on Switch --> C2960-LANBASE-MZ.122-25.SEE3.bin --> trying to upgrade to --> c2960-lanbasek9-mz.122-53.SE2
I am getting below error when trying to upgarde IOS:
2960-SW#copy tftp: flash:
Address or name of remote host []? 10.1.x.x
Source filename []? c2960-lanbasek9-mz.122-53.SE2
[Code].....
View 6 Replies
View Related
Mar 15, 2012
how can i take backup of startup config to tftp server through tftpd server.I am using 4506e switch
View 2 Replies
View Related
Mar 18, 2013
Recently had an external security scan done on my DIR 655 and scan results are stating I have an accessible TFTP Server running. i've been through all the settings, and even upgraded to the latest firmware. Yet security scans are telling me I've got a TFTP Server running. Why would one be showing on the external interface, and how can I stop it?
View 7 Replies
View Related
Apr 17, 2013
When I place the phone on a different subnet, registration failed. The connectivity between the two subnet should be working because I have a desktop computer hook up behind the Avaya phone and the computer can talk with the server without problemThe phone has gotten the IP from DHCP server can I can even ping the IP from phone server. but on the phone it shows "Discover 10.0.10.10" then reboot, again and again. 10.0.10.10 is the IP of phone server. And there is no firewall rules blocking the traffic between the two subnet.Like I said before, if I place the phone on the same subnet as the server it worked. The setting of the switch remain unchanged
View 3 Replies
View Related
Oct 7, 2012
I have time warner cable, they have a service where you can watch TV on your hand held devices.. Only issue is, you have to be on your home network. since thats fairly pointless since if i am home i am watching the 60 inch... i was trying to use VPN to get inside of my network to effectivly fool the app to thinking i was on my home network.
View 2 Replies
View Related
Feb 20, 2013
I have an issue on the Cat 3750 on the voice vlan; IP Phone not registering with PBX & Signaling Server. The ip phone hits dhcp and gets an ip address from a data scope. Data scope does have dhcp options for voice, same as voice scope so it should work but it doesnt.We removed the switchport access vlan 50 command, and left the switchport access voice vlan 51, and now the phone registers.Anything I can check on the switch to make sure voice vlan is working? Any debug voice vlan commands?The switch doesnt seem to distinguish voice and data traffic.I check dhcp and both scopes vlan 50 and vlan 51 have the same configuration. Defautl GW is different of course Catalyst 3750 is running 12.2(25)SEE2 [code]
View 5 Replies
View Related
Mar 11, 2010
We have 2mbps leased line and have Cisco 1841 which is managed by our ISP. I have hooked up another 1841 (please find basic config below, it will get more complex lateron) Now when I connect my laptop I am able to browse Internet. But when I conect VOIP phone, it is not able to contact it's Hosted Server on Internet.
VOIP phone is Polycom SoundPoint 550 and I get URL call disabed message. If I try netgear Firewall everything seems to work.that the voip provider needs following ports UDP Range 16384 - 32766, TCP 5060 & UDP 5060. But in my config all outbound traffic is allowed. [code]
View 6 Replies
View Related
Jul 19, 2011
I am using TFTPD32 to upgrade the IOS on a router. When I type in the commands copy tftp flash and enter all the necessary information, the router sits for a minute or so and then times out. There is no entry made in the log when it times out. copy flash tftp yields the same result. The fa 0/0 interface and the TFTP server are both on the same subnet and can successfully ping one anothe
View 16 Replies
View Related
Mar 7, 2011
I need to run a windows hyper terminal program between my POS register which has a serial RJ11 port to my PC db9 male port
View 2 Replies
View Related
Feb 6, 2007
I have tried the config-register command and it is not available. Here is part of the show ver command. I want to change the config-reg from 0xF to 0x2102.I have run into this before but don't remember how to correct it.....I think I have to use the boot command but not sure. Here it the output show ver Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)FX, RELEASE SOFTWARE (fc4)
System returned to ROM by power-on?System image file is "flash:c2960-lanbase-mz.122-25.FX/c2960-lanbase-mz.122-25.FX.bin"cisco WS-C2960-24TT-L (PowerPC405) processor (revision A0) with 61440K/4088K bytes of memory.last reset from power-on
4 Virtual Ethernet interfaces
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.64K bytes of flash-simulated non-volatile configuration memory.
Model number : WS-C2960-24TT-L
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C2960-24TT-L 12.2(25)FX C2960-LANBASE-M
Configuration register is 0xF
View 6 Replies
View Related
Mar 30, 2011
I'm having troubles with a cisco 877 router, it keeps changing itself to either 0x2101 which is good, or to 0x3100 which is bad because it messes up my bautrate to 1200 instead of 9600.it doesn't seem to matter if I change it, it will still tell me that it will change at next reload. [code]
I have never seen this before.the command in conf t : configuration-register 0x2101 is not working, played with wr mem or copy start run neither of one useful.
View 5 Replies
View Related
Feb 21, 2011
Whenever I go to sites like godaddy.com or mydomain.com to register a personal domain, they only offer me sites like url...What can I do? Computers have lots of memory but no imagination..
View 1 Replies
View Related
Mar 6, 2011
I'm having trouble TFTPing a configuration from my 851 Router to my computer through a IPsec VPN tunnel that this router is connected though. I am able to telnet and ping all devices on the far-end with no problem. I can TFTP a config from a switch behind this router, no problem. I am guessing this problem is related to an ACL on the router. I am also having trouble connecting to this router using the Cisco Config Professional. Discovery will fail, with connection could not be established or HTTP service is not enabled. I have enabled HTTP service. The CCP works fine when I am on the router's subnet.
View 3 Replies
View Related
Jul 11, 2011
We have a few remote sites that connect back to HQ with T1 & DMVPN (Cable/DSL) for data. Our CM Publisher/Subscriber reside in HQ. We recently installed FXS cards in these routers to provide Fax functionality to our remote sites since we will be removing some POTS lines.
Can we register the 2811 as a voice gateway (I am thinking MGCP as with VG224's we have in production) and have it handle faxes with FXS card as well as route data or will we need a separate device for this?
View 3 Replies
View Related
Jun 1, 2013
I am having two 6509E working in VSS and both are working fine. But the configuration register of command "remote command switch show boot" is 0x8000 which is different from that of RP (0x2102) .Now i want to change the value of configuration regsiter of SP to 0x2102.
View 1 Replies
View Related
May 17, 2012
I do get this error all the time on my WLC 4402 logs:
"Could not Register IP Add on MSCB. MSCB still in init state. Address:e4:ce:8f:13:e4:de[...It occurred 2 times.!]"
View 4 Replies
View Related
