Cisco Infrastructure :: Using Catalyst 5500 As A TFTP Server?
Mar 11, 2003I need to do one Catalyst 5500 as a TFTP server.Can I do it?Is the catalyst available to be a tftp server?
View 4 Replies
ADVERTISEMENT
Cisco Infrastructure :: Can't Upload By Tftp On Any Catalyst 2960
Dec 17, 2012i have few catalyst switches (2960, 3750) and i can't upload to them any files by tftp from my laptop, but i can download from them, and this bug don't appears on two routers.I was change tftp server, type of connection (wifi, cable), turn off firewall on win7, but no dice.
View 2 Replies View RelatedCisco Infrastructure :: 831 - Cannot Backup Config To Local TFTP Server
May 24, 2012I have a Cisco 831 router (c831-k9o3y6-mz.124-5c.bin) that cannot backup the config to a local tftp server. I have seen this behavior on a few different Cisco devices over the years and have never found a solution. The connection is made to the tftp server (in this case tftpd but similar behavior on any tftp server) and a blank file is created on the target machine file system, but the data is never transferred.
The router shows %Error opening tftp://192.168.0.2/router-confg (Timed out) [Failed]
The tftpd log shows 5 repeated attempts at the file write.
Connection received from 192.168.0.1 on port 53570 [25/05 11:56:40.922]
Write request for file <router-confg>. Mode octet [25/05 11:56:40.922]
Using local port 61607 [25/05 11:56:40.922]
<router-confg>: rcvd 0 blk, 0 bytes in 3 s. 0 blk resent [25/05 11:56:43.922]
Connection received from 192.168.0.1 on port 53570 [25/05 11:56:43.923]
[Code]...
This is also stopping me upgrading the image on the router as I cannot transfer in the other direction either.
Cisco Infrastructure :: IOS Router 2600 - ARP Failed / TFTP Transfer Aborted
Apr 24, 2011IP_ADDRESS: 10.10.10.1
> IP_SUBNET_MASK: 255.255.255.0
> DEFAULT_GATEWAY: 10.10.10.10
> TFTP_SERVER: 10.10.10.10
> TFTP_FILE: c2600-js-mz.122-15.T16.bin
> ....
> ARP: ADDRESS RESOLUTION for 10.10.10.10 timed out
> ARP failed with failure code 1. TFTP transfer aborted.
I connected cross cable between router and my pc and i put image of router in tftp_file with tftp server so when the router wants confirm y or n and i make y so my connection area connect and disconnect and never make connection with router so how can i slove it what are the steps in my pc and the router i used solarwinds tftp server ...
Cisco Switching/Routing :: Catalyst 3560 TFTP Transfer Slow?
Apr 3, 2013In the process of upgrading the image for all of our floor switches..In total there are 35 WS-3560G-PS switches.
So far I have been upgrading them all to image c3560-ipbasek9-mz.150-2.SE2.bin and that has gone well.
But this eve 2 of the switches are extremely slow on the TFTP transfer. Duplexing and links are good back to core.
But when I do a sh ver to compare one switch that is good and one that isnt I noticed this
TFTP Transfer is good on this one - cisco WS-C3560G-48PS (PowerPC405) processor (revision F0) with 122880K/8184K bytes of memory.
TFTP Transfer is slow on this one - cisco WS-C3560G-48PS (PowerPC405) processor (revision F0) with 131072K bytes of memory.
Cisco Switching/Routing :: Catalyst 6509-E - TFTP Image File Transfer / Out Of Sequence
May 29, 2012I am doing image upgrade on Catalyst 6509-E. During TFTP image transfer to sup-bootflash I always see !!!!!!!!!!!!!!!!!o!!!!!!!!!! "o" out of sequence packet. Although the image size seems to be correct at the end but there is always some "o" packets.
I am assuming not, but I haven't tried loading with the image after seeing this.
Cisco Infrastructure :: ASA 5500 - Changes To Wr Net Setup In ASA 8.43
Jun 3, 2012We have been deploying ASA 5500 series devices for longer than I've been around. We have always used a script from a tftp server that would use the "wr net" command to send the running-config to the tftp server for daily backups. The script was setup to automatically name these "hostname-mm/dd/yyyy" for each device. We cannot seem to get this working on devices running ASA 8.43. In fact I can't even get the "wr net" command to work from the ASA at all even though I have the tftp server defined correctly (note this is going over the "outside" interface so I always get the warning regarding using the interface with the lowest security level). I'm sure there is something out there that I have overlooked, however I have not been able to come across this. Have there been any changes in the setup, or functionality of the wr net command or the tftp configuration with ASA 8.43?
View 1 Replies View RelatedCisco :: 5500 - WCS To Prime NCS Or Infrastructure?
Oct 9, 2012I am thinking of upgrading the WCS to Cisco Prime NCS in our environment, but i read NCS is replaced by Prime infrastructure. Now I am confused if I should go for the NCS or Infrastructure. option for a smaller environment with 200APs and 4-5 WLCs(5500, 4400 and 2100) and future proof for the next 5 years. I heard WCS is going to be obsolete soon but didnt find any official announcement except for legacy licenses?
View 5 Replies View RelatedCisco Infrastructure :: Export Objects (net And Security) From ASA 5500 Firewall To CSV File?
Feb 14, 2012how to export objects (net and security) from an ASA 5500 firewall to a .csv file?
View 1 Replies View RelatedCisco :: LMS 4.2 - Use It As TFTP Server Not Working
Nov 5, 2012We have a LMS 4.2 installed. And I see the tftp port is open on it. however, every time, i tried to "copy running tftp" to the LMS from a switch, it says the Trying to connect to tftp server Connection to Server Established.TFTP put operation failed:Access violation
i seem not be able to find where to configure the tftp server.
Cisco :: Can A Phone Register To Tftp Server From Another LAN
Mar 30, 2012I am trying to implement a small VoIP LAN (you can see the lan in attachments)for a personal project. I am using:
- 2 x XP (on which i installed Cisco IP Communicator 7.0.3.0)
- 1 x Ubuntu (running GNS3 with a c3600 Router)
The problem is that the phone which is not in the same LAN with the tftp server cannot register.
1) Can a phone register to a tftp server from another LAN ?
2) If the answer for 1) is yes, what am i doing wrong (you can see the details in the attachments)? I mention that the ping works well anywhere in the LAN.
Cisco :: IP Phone Getting Firmware From TFTP Server?
Jan 8, 2012I have a questions on an Ip phone when getting the firmware from the TFTP server (e.g. CME) after bootup,- After the registration with CME, the IP phone will getting an auto config file which is the Default.xml file. - The CME will acts a a TFTP server which contains all the IP phone's firmware for different models like 7970 and 7640 in different directories.- The CME have configured with the directory path for all the IP phone when the IP phone come to TFTP and acquired the firmware.Let say I have a phone registered is 7970 and what is the mechanism that governs that my 7970 is not downloading the wrong firmware from the TFTP? Let say it might wrongly downloaded the 7640 firmware? Who take care of this? The phone itself? or the CME will tell the IP phone to take only the 7970 firmware via the Default.xml file?
View 1 Replies View RelatedCisco VPN :: ASA 5505 Backup Configuration To TFTP Server?
Oct 4, 2011Is there a way to backup the configuration file to a tftp server? I've tried "copy start tftp" and copy run tftp". No luck, I get an error message.
View 1 Replies View RelatedCisco Firewall :: Backup ASA-5510 From A Server Via TFTP?
May 29, 2012ow to backup Cisco ASA-5510 from a Linux server via TFTP?I do know how to backup a switch or a router. Basically creating an access list such as:
access-list 55 remark PERMIT hosts requesting TFTP access
access-list 55 permit host 172.16.0.27
and allowing access to
tftp-server nvram:startup-config 55
all this inside the router or the switch. From the Linux box just running a simple command such as:
tftp 172.16.0.3 -c get startup-config newbackup.conf
where 172.16.0.3 is the IP address of the switch and newbackup.conf is the name of the config file stored on the Linux machine.So, how do I do that with an ASA box? how to backup ASA from inside it.
Cisco Switching/Routing :: 3750 - How To Set Up TFTP Server
Feb 3, 2013How do i go about setting up a TFTP server from laptop to Cisco ws-C3750 48P Switch, I need to pull the image off the switch and place it on an other switch that has a corrupt image, The switch which is corrupted is the same as above Cisco ws-C3750 48P.
View 1 Replies View RelatedCisco Wireless :: C1140-k9w7 WAP Times Out TFTP Server
Nov 15, 2012I am trying to convert two Aironet 1141n access points to autonomous stand-alone units. I have connected the console cable and I can see the unit giving information in the console window, but I cannot type any commands. When I try to get the unit to upload the c1140-k9w7-tar.default file by holding the mode button in for 20-30 seconds, it shows it is examining the file, and then states that the connection to the tftp server has timed out. My windows firewall is off, the interface is configured as 10.0.0.2 255.255.255.0 and the tftp server is showing that.
View 15 Replies View RelatedCisco Security :: PIX 501 Resetting Firewall - Cannot Connect To TFTP Server
Aug 26, 2012I have been trying to get a PIX 501 firewall reset and have been having the hardest time. Im a student and this is my first experience with a firewall. I have been going through the steps here URL,I cant seem to connect to the tftp server, I have several nic's on my computer and tried them both and even plugged the firewall to the router and tried to use the gateway to connect but it doesn't seem to want to even ping for me.
View 4 Replies View RelatedCisco Switching/Routing :: WS-C6509-E - Possible To Boot IOS From TFTP Server
Oct 21, 2012I have been looking at grading the IOS version on our 6509-E however there is not enough space on disk:0 to upgrade to the version I need to install. The question I would like to ask is - is it possible to boot the IOS from a TFTP server? If this is possible what configuration do I need on the 6509 to enable this. How does the 6509 know about the TFTP server as an IOS is not installed and therefore it will not have a network configuration
View 2 Replies View RelatedD-Link DIR-825 :: Ddwrt Firmware Are Able To Set Up Additional Tftp Server
Jan 15, 2012I wonder if dir825 with ddwrt firmware are able to set up additional tftp server? I try to serve dir825 both as tftp server and dhcp server to allow remote client to have pxe booting from it. ( the booting image file would be located in external HD attatched to dir825's usb port )
View 1 Replies View RelatedCisco Switching/Routing :: Transfer Configuration From TFTP Server To 4507 And 6513
Apr 12, 2012I need to transfer a config from a TFTP Server to a 4507 and a 6513. When I transfer the config to both those switches, does it require a reboot?
View 5 Replies View RelatedCisco Switching/Routing :: Error While Upgrading IOS On 2960 Switch Using Tftp Server
Apr 29, 2013I am trying to copy IOS from my TFTP server which is on my laptop to cisco 2960 switch
I am able to ping to switch from my laptop, connectivity is fine, tftp server is running
Current Image on Switch --> C2960-LANBASE-MZ.122-25.SEE3.bin --> trying to upgrade to --> c2960-lanbasek9-mz.122-53.SE2
I am getting below error when trying to upgarde IOS:
2960-SW#copy tftp: flash:
Address or name of remote host []? 10.1.x.x
Source filename []? c2960-lanbasek9-mz.122-53.SE2
[Code].....
Cisco Switching/Routing :: 4506e Start-up Config Backup To Tftp Server
Mar 15, 2012how can i take backup of startup config to tftp server through tftpd server.I am using 4506e switch
View 2 Replies View RelatedD-Link DIR-655 :: Security Scan Fails With TFTP Server Open / How To Close
Mar 18, 2013Recently had an external security scan done on my DIR 655 and scan results are stating I have an accessible TFTP Server running. i've been through all the settings, and even upgraded to the latest firmware. Yet security scans are telling me I've got a TFTP Server running. Why would one be showing on the external interface, and how can I stop it?
View 7 Replies View RelatedCisco Infrastructure :: Can't Upload IOS To Flash Of Catalyst 2900 XL
Feb 15, 2012We have a switch Cisco Catalyst 2900 Series XL Model WS-C2924-XL-EN. 8 MB DRAM 4 MB FLASH
I already tried the discussions regarding flash_init dir_flash: boot and the likes.
By the way, I already downloaded the IOS for our switch through Cisco Website. Settings are default through Hyper Terminal
Here's the thing:
Whenever I transfer the .bin file using XMODEM, it prompted an error "Transfer cancelled by remote computer"
Cisco Infrastructure :: Poor Performance On Catalyst 4006 Sup II
Apr 3, 2003I have a Catalyst 4006 with Supervisor II engine. I have 48 port 10/100/1000 blades installed in it for connection to my servers. I am having a lot of problems with performance when connecting servers that are using 100 MB NICs. The speed of the connection is really bad. I have attempted setting the ports and NICs to 100MB Full duplex instead of auto-detect, but still get the same results.
I also have a 10/100 quad-port card installed in a NetApp filer. All four ports are trunked together and connect to 4 ports in the Catalyst. The ports in the Catalyst are trunked using the Port Channel feature of the CatOS. When I look at the port statistics on 3 of the 4 ports from the quad-card, there are a ton of runts and errors (both transmit and receive). The 4th port is fine, no errors.
Cisco Infrastructure :: Configure On Catalyst 6509 Two VACL
Feb 10, 2013 I need to configure on a cisco catalyst 6509 two VACL. On cisco 6509 there are already two SPAN ports configured, there are problems configuring other two VACL?
These VACLs send traffic to a Traffic Analyzer (SIEM), there are particular configurations to facilitate the operation?
Cisco Infrastructure :: Supervisor Engine Catalyst 6500 Modular IOS?
Oct 11, 2011I want to know the difference between the software that is Modular and the one that is not. What are the pros and cons ?
CAT6000-SUP32 IOS ADVANCED IP SERVICES SSH or CAT6000-SUP32 IOS ADVANCED IP SERVICES SSH (MODULAR)
Cisco Infrastructure :: No Icmp Reply From Catalyst 2950 Switch
Nov 15, 2005My switches is still operating but when i ping the switch, there isn't any reply. No icmp reply from catalyst 2950 switch
View 6 Replies View RelatedCisco Infrastructure :: Catalyst Express 500 Port Mirroring Capabilities?
Mar 1, 2006Does it have this switch some port mirroring capability (SPAN or other)?
View 2 Replies View RelatedCisco Infrastructure :: Catalyst 3750 - Creating ACL / Incoming Traffic?
Jul 10, 2011We have the next Settings in our SW. We crate an ACL and aplied to a SVI for Incomming Traffic, I understand that is not necesasry to allow the returning traffic in ACL, but we can't access to rdp for example when we add the ACL, if we remove it, the acces is ok, buet when we add again the access is deny, even we have a log entry, and the ACL i just for Incomming traffic. There is no another ACL.
See attached file
[code]...
Cisco Infrastructure :: Blocking ICMP On Catalyst 3750 Switch Vlan?
Apr 7, 2011I have set up an ACL on my 3750 switch to deny icmp from PC A on our inside network to PC B on a different VLAN on our inside network using the following ACLs:
deny icmp host 10.1.17.15 host 10.3.10.4
deny icmp host 10.3.10.4 host 10.1.17.15
-- or --
deny icmp host 10.1.17.15 host 10.3.10.4 echo-replydeny icmp host 10.3.10.4 host 10.1.17.15 echo-reply
These ACLs belong to an access-list that also limits ip traffic to a few specific machines.When I try pinging from PC A I receive a reply message back from PC B. Shouldn't this configuration block any ICMP from PC A to PC B and from PC B to PC A? I would have expected the first ACL statement to block any packets associated with ICMP and when that didn't work I tried the second configuration.
Cisco Infrastructure :: IGMP Snooping Configuration For Multicasting On Catalyst 3020
Nov 24, 2011IGMP Snooping configuration for Multicasting on Cisco Catalyst 3020
Our switch model is "Cisco Catalyst Blade Switch 3020 for HP" We are building HA (High Availability) Databases infrastructure. Currently, there are two nodes(hosts- servers) and two above switch for HA.
Oracle said we need to turn off the IGMP Snooping in order to use the multicasting for their interconnect communication. So my question is:
Q1> Is there any way to use Multicasting without turning off IGMP Snooping on Switch side?
Q2> If 'yes', how can we configure the switch for Multicasting ?
Oracle uses 230.0.1.0 & 224.0.0.251 IPs with 42000 range port for Multicasting communication.
Cisco Infrastructure :: Catalyst 4006 - Enable Http Login To Switch?
Apr 12, 2005Is it possible to enable login by http (web interface) to catalyst 4006 switch with WS-C4006 Software, Version NmpSW: 6.3(5) ?
View 21 Replies View Related