Cisco Wireless :: C1140-k9w7 WAP Times Out TFTP Server
Nov 15, 2012
I am trying to convert two Aironet 1141n access points to autonomous stand-alone units. I have connected the console cable and I can see the unit giving information in the console window, but I cannot type any commands. When I try to get the unit to upload the c1140-k9w7-tar.default file by holding the mode button in for 20-30 seconds, it shows it is examining the file, and then states that the connection to the tftp server has timed out. My windows firewall is off, the interface is configured as 10.0.0.2 255.255.255.0 and the tftp server is showing that.
View 15 Replies
ADVERTISEMENT
Feb 4, 2013
I am trying to copy IOS from unix box to 3750 switch
archive tar /xtract tftp://192.168.1.5/c3750-ipserviceslmk9-tar.122-55.SE7.tar flash:
%Error opening tftp://192.168.1.5/c3750-ipserviceslmk9-tar.122-55.SE7.tar (Timed out)
i get error
i can ping the unix box from the switch.Here is switch flash info
sh flash
Directory of flash:/
2 -rwx 6484 Mar 1 1993 00:02:53 +00:00 vlan.dat 4 -rwx 1929 Feb 4 2013 22:59:34 +00:00 private-config.text 5 drwx 128 Jun 22 1993 16:14:21 +00:00 c3750-ipservices-mz.122-25.SEE2 458 -rwx 20848 Feb 4 2013 22:59:34 +00:00 config.text 6 drwx 64 Jun 22 1993 16:21:05 +00:00 c3750-ipservicesk9-mz.122-35.SE2 460 -rwx 12961 Mar 1 1993 00:05:47 +00:00 config.text.bak 461 -rwx 3096 Feb 4 2013 22:59:34 +00:00 multiple-fs
15998976 bytes total (5166592 bytes free)
View 10 Replies
View Related
Mar 11, 2012
I have a configuration AP & WDS (with AP):
#show version
Cisco IOS Software, C1140 Software (C1140-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1)
...
ROM: Bootstrap program is C1140 boot loader
BOOTLDR: C1140 Boot Loader (C1140-BOOT-M) Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1)
[code]....
When I try to connect to WPA-ENTERPRISE or WPA-PSK - connected, but when I try to connect ot CCKM-ROAMING or WPA-ROAMING using EAP-FAST or LEAP (with or without CCKM) - connection failed.
Notice: In the current configuration, if client use LEAP (without CCKM) and AP work without WDS - WPA-ROAMING is worked correctly. But if client use LEAP (without CCKM) and AP work with WDS - WPA-ROAMING is not working.
View 10 Replies
View Related
Nov 5, 2012
We have a LMS 4.2 installed. And I see the tftp port is open on it. however, every time, i tried to "copy running tftp" to the LMS from a switch, it says the Trying to connect to tftp server Connection to Server Established.TFTP put operation failed:Access violation
i seem not be able to find where to configure the tftp server.
View 2 Replies
View Related
Mar 30, 2012
I am trying to implement a small VoIP LAN (you can see the lan in attachments)for a personal project. I am using:
- 2 x XP (on which i installed Cisco IP Communicator 7.0.3.0)
- 1 x Ubuntu (running GNS3 with a c3600 Router)
The problem is that the phone which is not in the same LAN with the tftp server cannot register.
1) Can a phone register to a tftp server from another LAN ?
2) If the answer for 1) is yes, what am i doing wrong (you can see the details in the attachments)? I mention that the ping works well anywhere in the LAN.
View 11 Replies
View Related
Jan 8, 2012
I have a questions on an Ip phone when getting the firmware from the TFTP server (e.g. CME) after bootup,- After the registration with CME, the IP phone will getting an auto config file which is the Default.xml file. - The CME will acts a a TFTP server which contains all the IP phone's firmware for different models like 7970 and 7640 in different directories.- The CME have configured with the directory path for all the IP phone when the IP phone come to TFTP and acquired the firmware.Let say I have a phone registered is 7970 and what is the mechanism that governs that my 7970 is not downloading the wrong firmware from the TFTP? Let say it might wrongly downloaded the 7640 firmware? Who take care of this? The phone itself? or the CME will tell the IP phone to take only the 7970 firmware via the Default.xml file?
View 1 Replies
View Related
Oct 4, 2011
Is there a way to backup the configuration file to a tftp server? I've tried "copy start tftp" and copy run tftp". No luck, I get an error message.
View 1 Replies
View Related
May 29, 2012
ow to backup Cisco ASA-5510 from a Linux server via TFTP?I do know how to backup a switch or a router. Basically creating an access list such as:
access-list 55 remark PERMIT hosts requesting TFTP access
access-list 55 permit host 172.16.0.27
and allowing access to
tftp-server nvram:startup-config 55
all this inside the router or the switch. From the Linux box just running a simple command such as:
tftp 172.16.0.3 -c get startup-config newbackup.conf
where 172.16.0.3 is the IP address of the switch and newbackup.conf is the name of the config file stored on the Linux machine.So, how do I do that with an ASA box? how to backup ASA from inside it.
View 1 Replies
View Related
Mar 11, 2003
I need to do one Catalyst 5500 as a TFTP server.Can I do it?Is the catalyst available to be a tftp server?
View 4 Replies
View Related
Feb 3, 2013
How do i go about setting up a TFTP server from laptop to Cisco ws-C3750 48P Switch, I need to pull the image off the switch and place it on an other switch that has a corrupt image, The switch which is corrupted is the same as above Cisco ws-C3750 48P.
View 1 Replies
View Related
Aug 26, 2012
I have been trying to get a PIX 501 firewall reset and have been having the hardest time. Im a student and this is my first experience with a firewall. I have been going through the steps here URL,I cant seem to connect to the tftp server, I have several nic's on my computer and tried them both and even plugged the firewall to the router and tried to use the gateway to connect but it doesn't seem to want to even ping for me.
View 4 Replies
View Related
Oct 21, 2012
I have been looking at grading the IOS version on our 6509-E however there is not enough space on disk:0 to upgrade to the version I need to install. The question I would like to ask is - is it possible to boot the IOS from a TFTP server? If this is possible what configuration do I need on the 6509 to enable this. How does the 6509 know about the TFTP server as an IOS is not installed and therefore it will not have a network configuration
View 2 Replies
View Related
May 24, 2012
I have a Cisco 831 router (c831-k9o3y6-mz.124-5c.bin) that cannot backup the config to a local tftp server. I have seen this behavior on a few different Cisco devices over the years and have never found a solution. The connection is made to the tftp server (in this case tftpd but similar behavior on any tftp server) and a blank file is created on the target machine file system, but the data is never transferred.
The router shows %Error opening tftp://192.168.0.2/router-confg (Timed out) [Failed]
The tftpd log shows 5 repeated attempts at the file write.
Connection received from 192.168.0.1 on port 53570 [25/05 11:56:40.922]
Write request for file <router-confg>. Mode octet [25/05 11:56:40.922]
Using local port 61607 [25/05 11:56:40.922]
<router-confg>: rcvd 0 blk, 0 bytes in 3 s. 0 blk resent [25/05 11:56:43.922]
Connection received from 192.168.0.1 on port 53570 [25/05 11:56:43.923]
[Code]...
This is also stopping me upgrading the image on the router as I cannot transfer in the other direction either.
View 1 Replies
View Related
Jan 15, 2012
I wonder if dir825 with ddwrt firmware are able to set up additional tftp server? I try to serve dir825 both as tftp server and dhcp server to allow remote client to have pxe booting from it. ( the booting image file would be located in external HD attatched to dir825's usb port )
View 1 Replies
View Related
Apr 12, 2012
I need to transfer a config from a TFTP Server to a 4507 and a 6513. When I transfer the config to both those switches, does it require a reboot?
View 5 Replies
View Related
Apr 29, 2013
I am trying to copy IOS from my TFTP server which is on my laptop to cisco 2960 switch
I am able to ping to switch from my laptop, connectivity is fine, tftp server is running
Current Image on Switch --> C2960-LANBASE-MZ.122-25.SEE3.bin --> trying to upgrade to --> c2960-lanbasek9-mz.122-53.SE2
I am getting below error when trying to upgarde IOS:
2960-SW#copy tftp: flash:
Address or name of remote host []? 10.1.x.x
Source filename []? c2960-lanbasek9-mz.122-53.SE2
[Code].....
View 6 Replies
View Related
Mar 15, 2012
how can i take backup of startup config to tftp server through tftpd server.I am using 4506e switch
View 2 Replies
View Related
Mar 18, 2013
Recently had an external security scan done on my DIR 655 and scan results are stating I have an accessible TFTP Server running. i've been through all the settings, and even upgraded to the latest firmware. Yet security scans are telling me I've got a TFTP Server running. Why would one be showing on the external interface, and how can I stop it?
View 7 Replies
View Related
Mar 14, 2012
When I'm pinging my mail server, it gave me different IP's at different times. As the mail server is actually owned by us, I would like to know if that is possible without the IP actually being changed by someone. This is really critical for me. I didn't mean to cross post so providing the URL of the other place where I posted..
If you'd like I may attach the screenshots for the same, but don't think that will server any purpose.
View 7 Replies
View Related
Dec 28, 2012
For the last several months, but progressively worse, my internet drops due to the DNS Server not responding. This happens across my whole network and the only fix I can come up with is to reset the router every time it does this. At this point I am thinking a new router is in order (but do not have the money atm), I am using a D-Link DIR-625 V. C1 Firmware 3.08 router and a Motorola SB6120 modem. Is there another permanent fix for this problem is or my router on it's last legs? Would setting a new DNS Server on my router work?
View 11 Replies
View Related
Jan 26, 2013
I am running ubuntu 12.04, with apache2.My router configuration is set to forward port 80 to my local IP.The problem is I can only access the server as local host. Else it times out (from devices using the same network). I do not have sfw firewall enabled, neither shore firewall.
View 1 Replies
View Related
Jul 19, 2011
I am using TFTPD32 to upgrade the IOS on a router. When I type in the commands copy tftp flash and enter all the necessary information, the router sits for a minute or so and then times out. There is no entry made in the log when it times out. copy flash tftp yields the same result. The fa 0/0 interface and the TFTP server are both on the same subnet and can successfully ping one anothe
View 16 Replies
View Related
Apr 29, 2013
I can't get connectivity from laptop to AP using cross over or straight through cable to do a tftp transfer from tftp server on laptop to ap.
I held the mode button on ap and powered on to get to rommon. The ap has no ios so it goes to rommon anyway. ap light is blinking red.
ap: set
DEFAULT_ROUTER=10.0.0.1
IP_ADDR=10.0.0.1
NETMASK=255.255.255.224
[Code].....
View 3 Replies
View Related
Nov 29, 2012
I am trying to TFTP an image to a Cisco 2504 WLC. The management interface is 10.1.1.1 /24 and I have my PC connected to a port on the WLC with the IP address 10.1.1.10. However, I still do not have connectivity between the PC and WLC.
View 3 Replies
View Related
Jan 8, 2013
I have WLC 5508 in my office and i am asked to backup file configuration from WLC but when i remote WLC to get the upload configuration file via tftp it doesn't work.
But when I try to use direct connection ( point to point ) with WLC and my laptop i can get the upload configuration file. is there something wrong, actually i have connected with that WLC i can ping and telnet that device
View 8 Replies
View Related
Jun 13, 2012
I have to upgrade our Wireless LAN Controller modules inside 2811 routers.I downloaded files from Cisco site, verified MD5 hashes and hoped it will be pretty easy.the problem is, that WLC is only capable of code upgrade via TFTP and that the image size is ~80MBTFTP transfer hangs at approximately 64MB at the exact same packet number[CODE]
View 4 Replies
View Related
Mar 29, 2012
I have an airlink ar525w wireless router. My wireless connection drops out every few hours and I have to reset my router to get it up again. My wired connections work perfectly. Also, I am able to see my network as available and with full signal strength from windows but connecting to it doesn't do anything (just says connecting forever). This is not isolated to one computer. I have tried it with laptops, desktops and smartphones. The strange thing is that it works perfectly (hasn't dropped a connection for one month) if I have wireless security disabled.I have tried different types of security (WEP, WPA, WPA2), different channels (all 11 channels), assigning static IP addresses to all my devices and turning off the DHCP server on my router. But none of these settings fix the problem. would be willing to buy another router, but I was reading through reviews on newegg and every router that I saw reviews for has a few people experiencing the same problem that I described here. Is this a widespread problem that I have to live with or does this have something to do with my router specifically?
View 3 Replies
View Related
Mar 12, 2011
My nephew's MAC continuously times out when trying to connect to my wireless connection. Details are:
ISP=Orcon
Modem/router=Dynalink: RTA1025WE
No other network equipment.
Wireless connection
Authentication=WPA-PSK
Browser=Firefox
MAC Book Pro, OS=10.6.2
View 2 Replies
View Related
Mar 24, 2013
We have about 15-20 APs out in the field, and at random they seem to disassociate from the WLCs and re-associate within a few minutes. We have not looked into that entirely yet, but we are having an issue with a few. Sometimes, they will disassociate and after a few hours reassociate.
View 9 Replies
View Related
May 26, 2012
I have a Linksys X2000 modem. Why does my internet go down several times a day? My provider is Century Link and I have already called them. They say all is well on their end, so it must be my modem. I reset and sometimes it pops right back and other times it takes an hour or more.
View 2 Replies
View Related
Jun 23, 2011
we have 4408 controller purely for guest access and with local authentication..basically the guest access is free but needs an acc on the WLC on logon. when the user uses credentials to logon, after a while it gets disconencted and the user needs to reauthenticate. this happens every few mins. is there an option on the WLC to extend the session?
View 4 Replies
View Related
Nov 19, 2011
Basically, my wireless internet has been disconnecting then reconnecting on weekends up to 50+ times a day. The weekend also seems to be the time when I have 10+ wireless connections in range. Can that be the cause of it? I have tried changing my router channels but to no avail.
View 1 Replies
View Related
Jan 10, 2013
Region : Spain
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : Telefonica-Spain
'm having the same problem my tp-link freezes several times a day and only a hard reset will get it working again. I have no idea how to fix it, I have contacted tp-link support and they say to make sure I have all the right ADSL configuration parameters.
View 7 Replies
View Related
