Cisco Infrastructure :: IGMP Snooping Configuration For Multicasting On Catalyst 3020

Nov 24, 2011

IGMP Snooping configuration for Multicasting on Cisco Catalyst 3020 
 
Our switch model is "Cisco Catalyst Blade Switch 3020 for HP" We are building HA (High Availability) Databases infrastructure. Currently, there are two nodes(hosts- servers) and two above switch for HA.
 
Oracle said we need to turn off the IGMP Snooping in order to use the multicasting for their interconnect communication. So my question is:
 
Q1> Is there any way to use Multicasting without turning off IGMP Snooping on Switch side?
 
Q2> If 'yes', how can we configure the switch for Multicasting ?
 
Oracle uses 230.0.1.0 & 224.0.0.251 IPs with 42000 range port for Multicasting communication.

ADVERTISEMENT

Cisco WAN :: IGMP Snooping Configuration For Multicasting On Catalyst 3020

Nov 24, 2011

Our switch model is "Cisco Catalyst Blade Switch 3020 for HP"We are building HA (High Availability) Databases infrastructure.Currently, there are two nodes(hosts- servers) and two above switch for HA.Oracle said we need to turn off the IGMP Snooping in order to use the multicasting for their interconnect communication.So my question is: Is there any way to use Multicasting without turning off IGMP Snooping on Switch side?If 'yes', how can we configure the switch for Multicasting ?Oracle uses 230.0.1.0 & 224.0.0.251 IPs with 42000 range port for Multicasting communication.

View 1 Replies View Related

Cisco Application :: IGMP Snooping Configuration For Multicasting On Catalyst 3020

Nov 24, 2011

IGMP Snooping configuration for Multicasting on Cisco Catalyst 3020 Our switch model is "Cisco Catalyst Blade Switch 3020 for HP" We are building HA (High Availability) Databases infrastructure.Currently, there are two nodes(hosts- servers) and two above switch for HA.Oracle said we need to turn off the IGMP Snooping in order to use the multicasting for their interconnect communication. Is there any way to use Multicasting without turning off IGMP Snooping on Switch side?, If 'yes', how can we configure the switch for Multicasting ?

View 1 Replies View Related

Cisco Switching/Routing :: IGMP Snooping Configuration For Multicasting On Catalyst 3020

Nov 24, 2011

Our switch model is "Cisco Catalyst Blade Switch 3020 for HP" We are building HA (High Availability) Databases infrastructure.Currently, there are two nodes(hosts- servers) and two above switch for HA.
 
Oracle said we need to turn off the IGMP Snooping in order to use the multicasting for their interconnect communication.So my question is:
 
Q1> Is there any way to use Multicasting without turning off IGMP Snooping on Switch side?
 
Q2> If 'yes', how can we configure the switch for Multicasting ?
 
Oracle uses 230.0.1.0 & 224.0.0.251 IPs with 42000 range port for Multicasting communication.

View 1 Replies View Related

Cisco Switches :: ESW 520 IGMP Snooping?

Sep 25, 2011

I have to deploy a full IP-TV solution and the IGMP snooping must be supported on the switch.

I know the the ESW 520 support this protocol but the full IP-TV solution will manage uo to 200 set up boxes, does this switch support all this traffic?

I also have another question, what exactly mean "Combo SFP slots include one 10/100/1000BASE-T Ethernet port and 1 SFP-based Gigabit Ethernet slot for fiber, 1 port active at a time." ? Is when I use 1 port with LX sfp transcever the 3 other uplink ports will be inactive and I can't add another or trunk it with another switch?

View 2 Replies View Related

Cisco Switches :: Setting Up IGMP Snooping On SG 300-10

Oct 3, 2011

i want to setup IGMP Snooping on the Managed Switch SG 300-10. I do it over the webinterface. Enable Bride Multicast Filtering, Forwarding Method IP Group Address and enable IGMP Snooping v3. In the local Network i stream up to 4 Multicast streams 239.1.1.1-239.1.1.4. The client vor the Multicast are IP setupboxes. If i connect PRTG Network Monitor over SNMP to see the Traffic on the ports i see that all Multicast streams are at every port. What is the false i do? I thought only the multicast stream that is shoosen at the client are forwarding and not all multicast streams. The IP STBs have only a 100Mbit network adapter and i have to muticast over 10 Streams (10Mbit per stream) over the local VLAN. So i think IGMP Snooping is the solution for me. Or need i also a Multicast router?

View 1 Replies View Related

Cisco Switching/Routing :: 861 Do Not Use IGMP Snooping?

Nov 21, 2011

I useing Cisco861  : C861-universalk9-mz.124-24.T3.bin on my Cisco861 the command "ip pim dense-mode","ip igmp static-group "command does not exist,
 
router(config)# ip p?
port-map    prefix-list
router(config)#

[Code]....

View 4 Replies View Related

Cisco Routers :: SRP527W VPN For MAC To Run IGMP Snooping

Sep 12, 2012

I have a network which is based upon a 4507 Core/Dist switch, with 1G fibre to a bunch of radially connected 2960 Access switches. It all works fine and as expected for data and telephony.I have been tasked with setting up one of the VLANs to support multicast, so a bunch of video streams will be injected at the 4507, and will be delivered to client PCs connected to the 2960 switches.The 4507 is running with SVIs to some VLANs, but the VLAN that will have the Multicast on it is isolated, with no SVI.I could change this if required,I need to run IGMP snooping, and probably deploy CGMP to take advantage of the Cisco-proprietary functionaity.

View 4 Replies View Related

Cisco Switches :: Setting Up IGMP Snooping On SG300

Apr 3, 2012

I have some problems with IGMP snooping feature on the SG300 switch. I want to filter multicast dinamycally with IGMP snooping. To configure our switch I use the web page: - In Multicast I first enable: Bridge Multicast  Filtering Status Thzn I enable IGMP snooping ,Then I enable IGMP Snooping on my VLAN During my tests I stream a video (UDP multicast). This stream is present on all the ports of my VLAN with IGMP snooping normally configured. Also, I can't see any entry in the IGMP/MLD IP Multicast Group  Table where I should normally see my multicast address.

View 4 Replies View Related

Cisco Switching/Routing :: IGMP Snooping On 3560

Nov 28, 2012

how to configure igmp snooping on a 3560.
 
I have a pure L2 switching network and 2 hosts on the same vlan that want to communicate a protocol between each other using multicast packets.
 
I wanted to configure ip snooping only on this vlan and create a multicast group limited to only these 2 host ir order to make sure that the multicast traffic is only between both of them.
 
Since both are sender and receiver I´m not quite sure on how to configure this. In theory I also need to set an IP Multicast Address on the switch to where the hosts will send their multicast packets.
 
This is basically the network:
 
HOST_A---|SWITCH_A|==|SWITCH_B|---HOST_B

View 11 Replies View Related

Cisco Switching/Routing :: IGMP Snooping On The Cat3560?

Oct 10, 2012

In the following topology
 
R1(f0/0)------------(f0/1)SW1(f0/2)------------R2
  
R1 is configured as host (no ip routing) with ip igmp join 239.10.10.10 on fa0/0 and R2 with ip pim sparse-mode on f0/0. SW1 is a Catalyst 3560 running IOS 12.2(25)SEE4 working at Layer 2 only in this topology (VLAN 1).
 
I configured SW1 for igmp snooping:
 
ip igmp snooping
ip igmp snooping vlan 1
  
Basically, I can see 'snooped' muticast group (via IGMP reports sent by R1)
 
SW1#sh ip igmp snooping group
Vlan      Group             Type        Version     Port List
----------------------------------------------------------------
1         224.0.1.40        igmp        v2          Fa0/2
1         239.10.10.10      igmp        v2          Fa0/1, Fa0/2
SW1#
SW1#
SW1#

[code]....

View 4 Replies View Related

Linksys Wireless Router :: E4200 And IGMP Snooping?

Jul 20, 2011

Is the E4200 able to deal with IGMP snooping (v2/v3)?I would like to replace a motorola/netopia vdsl-router which handles internet tv-traffic.

View 4 Replies View Related

Cisco Switching/Routing :: Nexus 7010 - IP IGMP Snooping Querier

Sep 23, 2012

I've got a pair of Nexus 7010's running vPC. I am having a Multicast issue with a cluster of Linux servers that need to talk Multicast for cluster/high-availability operation. All the servers need to talk to a single multicast address and I am having trouble getting them to communicate. I believe I need to enable IP IGMP Snooping Querier on the N7K's and it needs to be enabled on the VLAN where the servers reside. How to enable IP IGMP Snooping Querier on a VLAN ?

View 5 Replies View Related

Cisco Switching/Routing :: Default IGMP Snooping Is Enabled On 3750 From Documents

Nov 14, 2012

We have a 3750 acting as the core. By default IGMP snooping is enabled on cisco 3750 from the documents.but, when we see the ip mroute table on the switch, it doesnt show any output.

View 40 Replies View Related

Cisco Switching/Routing :: 6500 / IGMP Snooping - All Mcast Traffic Forwarded To Mrouter Ports?

Mar 22, 2012

I've been looking into IGMP snooping and have read that a L2 switch will forward multicast traffic to all ports connected to an interested receiver AND all mrouter ports. In a L2 'V' topology this results in all multicast traffic routed onto a VLAN being forwarded to the 2nd distribution switch. My question is how should a 6500 Sup720 deal with this unwanted multicast traffic? Both a Local SPAN of the RP and a Netdr capture suggest that this traffic is punted to the RP and ultimately dropped. Is this expected behavior or should the traffic be dropped in H/W?

View 2 Replies View Related

Cisco Infrastructure :: WVC210 WLAN Camera Multicasting

Mar 27, 2010

It act's about the CISCO WC210 WLAN Camera.
 
We are using the WVC210 WLAN-Cameras (URL), this camera has a web server, so is accessible over a normal web-browser, to see the video transmission.
 
We just set it up with a normal WLAN-Router, so the camera is connected wireless to the router, and this router is connected to the internet (WAN). With the cisco video-software or the web-interface, it's now possible to stream the video.
 
Now we like to stream the Video on our Website, so people what visit our site can take a look at our company and so on.We are able to stream the Video with the MJEPG-Format, like the camera web-interfaces offers...
 
The problem is, with normal ip-transfer method, each user would connect directly to the camera and increases the data-transfer, the internet-connection will than overload easily.But the camera supports multi-casting,  so the camera only transmit one data stream and all clients connected to this stream will receive the packages.
 
Our problem is, we do not have any knowledge about multi-casting and how it works, the camera has a normal ip-address and a pre-configured multicast address with group name, so how can we connect a client to this multicast group, without increasing the data-transfer with each new user? Would you recommend us to use the multicast function of this camera or put a server between the camera and the website?

How we can set up this multicast service and easily get a player for the stream on our website, without using many plug ins or special apps ?

View 2 Replies View Related

Cisco Switching/Routing :: Catalyst Blade Switches 3020 For HP

Feb 10, 2013

We have 12 Catalyst Blade Switches 3020 for HP running IOS Version 12.2(55)SE.  In the configuration of these switches I see the statement shown below.
 
no spanning-tree vlan 34,45-55,70,600,643,840,843-850
 
The 12 blade switches are configured as VTP clients and running VTP V2.  I did not configure the statement shown above.  It appered by itself.  And even if I delete it, it will reapper.  (The blade switches are interconnected to two 6509s.  The two 6509s are the STP root and VTP bridges. I configure Vlans and STP on the 6509s).
 
why the statement above appers on the blade switches 3020s?
 
I mean I use other Cisco switches such as 3750s and 3560s and I have never seen the statement above appear by itself.

View 4 Replies View Related

Cisco Switching/Routing :: Dhcp Snooping Without Effect In Catalyst 2960-PST-S

Apr 17, 2012

I have a new catalyst 2960,and i want to enable DHCP SNOOPING,but,it doesn't work,the server is stilling offert addresses IP and it's not connected  in a trusted port,the schema is very simple:1 switch catalyst 2960 PST-S,1 server dhcp and 1 pc client,the PC and the server are in VLAN 10,DHCP SNOOPING is enabled in all ports and no port is trusted,but the client get addresse IP after retyping ipconfig /release  and ipconfig /renew in dos commande.the configuration and the version of the switch are in the file attached.I tested the same configuration in a catalyst C3560-24PS and DHCP SNOOPING work normally,i tested in other catalyst 2960-PST-S,but the same probléme:DHCP SNOOPING without effect,the commands typed is:

-ip dhcp snnoping

-ip dhcp snooping vlan 10

View 5 Replies View Related

Cisco Switching/Routing :: Multicasting Configuration On 3750x Switch

Jan 28, 2013

when enabling multicasting on layer 3 interfaces the CPU becomes fully utilized , is there any specific configuration should be enabled to reduce this .
 
Config :
 
Inetface vlan 100
ip pim sparse-dense
ip igmp version 3

[Code]......

View 1 Replies View Related

Cisco Infrastructure :: Can't Upload IOS To Flash Of Catalyst 2900 XL

Feb 15, 2012

We have a switch Cisco Catalyst 2900 Series XL Model WS-C2924-XL-EN. 8 MB DRAM 4 MB FLASH
 
I already tried the discussions regarding flash_init dir_flash: boot and the likes.
 
By the way, I already downloaded the IOS for our switch through Cisco Website. Settings are default through Hyper Terminal
  
Here's the thing: 
 
Whenever I transfer the .bin file using XMODEM, it prompted an error "Transfer cancelled by remote computer"

View 3 Replies View Related

Cisco Infrastructure :: Can't Upload By Tftp On Any Catalyst 2960

Dec 17, 2012

i have few catalyst switches (2960, 3750) and i can't upload to them any files by tftp from my laptop, but i can download from them, and this bug don't appears on two routers.I was change tftp server, type of connection (wifi, cable), turn off firewall on win7, but no dice.

View 2 Replies View Related

Cisco Infrastructure :: Using Catalyst 5500 As A TFTP Server?

Mar 11, 2003

I need to do one Catalyst 5500 as a TFTP server.Can I do it?Is the catalyst available to be a tftp server?

View 4 Replies View Related

Cisco Infrastructure :: Poor Performance On Catalyst 4006 Sup II

Apr 3, 2003

I have a Catalyst 4006 with Supervisor II engine. I have 48 port 10/100/1000 blades installed in it for connection to my servers. I am having a lot of problems with performance when connecting servers that are using 100 MB NICs. The speed of the connection is really bad. I have attempted setting the ports and NICs to 100MB Full duplex instead of auto-detect, but still get the same results.
 
I also have a 10/100 quad-port card installed in a NetApp filer. All four ports are trunked together and connect to 4 ports in the Catalyst. The ports in the Catalyst are trunked using the Port Channel feature of the CatOS.  When I look at the port statistics on 3 of the 4 ports from the quad-card, there are a ton of runts and errors (both transmit and receive). The 4th port is fine, no errors.

View 2 Replies View Related

Cisco Infrastructure :: No Icmp Reply From Catalyst 2950 Switch

Nov 15, 2005

My switches is still operating but when i ping the switch, there isn't any reply. No icmp reply from catalyst 2950 switch

View 6 Replies View Related

Cisco Infrastructure :: Blocking ICMP On Catalyst 3750 Switch Vlan?

Apr 7, 2011

I have set up an ACL on my 3750 switch to deny icmp from PC A  on our inside network to PC B on a different VLAN on our inside network using the following ACLs:
 
deny icmp host 10.1.17.15 host 10.3.10.4
deny icmp host 10.3.10.4 host 10.1.17.15
 
-- or --
 
deny icmp host 10.1.17.15 host 10.3.10.4 echo-replydeny icmp host 10.3.10.4 host 10.1.17.15 echo-reply

These ACLs belong to an access-list that also limits ip traffic to a few specific machines.When I try pinging from PC A I receive a reply message back from PC B. Shouldn't this configuration block any ICMP from PC A to PC B and from PC B to PC A? I would have expected the first ACL statement to block any packets associated with ICMP and when that didn't work I tried the second configuration.

View 6 Replies View Related

Cisco Infrastructure :: Catalyst 4006 - Enable Http Login To Switch?

Apr 12, 2005

Is it possible to enable login by http (web interface) to catalyst 4006 switch with WS-C4006 Software, Version NmpSW: 6.3(5) ?

View 21 Replies View Related

Cisco Infrastructure :: 2960s / 3750s / 6506 - AC Power Outlet On Catalyst Switch

Apr 15, 2011

I have several 2960s and 3750s and two 6506 (ws-cac-3000w) recently move to new location The  power outlet is the same ,but Volt is different current 2960/3750 use this(one phase 3 wire) 220v and new location  change to (from 3 phase 4 wire -> one phase 220v)6506 current using(one phase 3 wire) and will be change to (from 3 phase 4 wire -> one phase 220v)

 I had search doc about power supply /cable ,  only show support single phase 220 v ,but not description  vlot between each wire !!Does new location power outlet suit for 2960/3750s power and 6500 ws-cac-3000w ?!? Do I need chane power outlet back to current using?

View 1 Replies View Related

Cisco Infrastructure :: GSR 12000 Series / Can MPLS Aware Netflow Version 9 Be Enabled On Catalyst Switches

Jun 9, 2003

I'm working for KOREA TELECOM, and currently providing MPLS VPN.We're planning to provide our customer with traffic report using NetFlow..
 
I read some documents which reads Netflow ver.9 can be enabled on Cisco GSR 12000 Series, but no mention about  catalyst switches. Netflow ver 9 can be activated on catalyst 6500 series.. because the point where switch is located already have mpls encapsulated packet ( mpls vpn packet).

View 3 Replies View Related

Cisco Infrastructure :: WCCP Configuration On 4507

Jun 16, 2012

I am trying to setup WCCP on our 4507. For some reason I cannot get this to work! The config I have tried is below. I can't figure out
 
ip wccp web-cache group-list IRONPORT-GROUPLIST
ip wccp source-interface GigabitEthernet2/24
!
Interface Vlan160

[Code].....

View 2 Replies View Related

Cisco Infrastructure :: 3700 - Configuration Tool

Dec 15, 2003

Is there any tool or script which will automatically generate scripts for routers, switches. I am configuring 100's of cisco 3700 routers and 3500 switches. I want to be consistent with my configuration . I am looking for script that when u run it, it will prompt you step by step to configure router, and switch and generate router config file. I know aobut cisco autoconfig maker but thats not what i am looking for.

View 2 Replies View Related

Cisco Infrastructure :: 2811 Terminal Server Configuration

Nov 30, 2011

i trying to set up a terminal server, 2811 with an HWIC-16A und two octo cables. [code] connect and sometimes not. It seems the connection is established but i don't get a prompt von the target device.The target devices are cisco 2811 and cisco catalysts 3560.

View 1 Replies View Related

Cisco Infrastructure :: Stacking Catalyst 3750 Layer 2 And Layer 3

Nov 15, 2011

I have a question if I Stack a Catalyst 3750 L3 with a Catalyst just L2, will we able to use all L3 capabilities?

Switches are  

WS-C3750G-24TS-E1U
WS-C3750V2-24PS-S

View 4 Replies View Related

Cisco Infrastructure :: 2620 - Configuration Register Stuck At 0x3922

Sep 29, 2002

I X modem an IOS file to my 2620 router and in the process set the console bps to 115200 which changed the register to 0x3922.  Now when I try to connect from the console with any bps, I get garbage! 

I can connect from the AUX port and get to the User Exec. mode but since no privileged password is set, I can't get any further to change the config register back to 0x2102.

View 6 Replies View Related

Cisco Infrastructure :: Blackout During Configuration Reset 1700 / 1721 Router

Apr 7, 2011

i got a big problem, during a configuration reset i got an electrical blackout. I have set the configuration back after a password reset and send the reset prompt. At the restart of the router the blackout take all for 10 seconds out. When i restart the system an connect the router with the hyper terminal i get the following output:
 
[Code].....
 
I think the config was lost but how can i restart the router and enter a new one?

View 2 Replies View Related

Cisco WAN :: Catalyst 2950 - Switch Configuration

Dec 27, 2010

I just started configuring my cisco catalyst 2950 switch. Basically im preparing for my CCENT exams my basic configuration is as follows.

-My Laptop is connected to the console port
-I'm connected to the internet via my wireless
-I'm connected to the switch port via my NIC card

View 4 Replies View Related

Cisco Switching/Routing :: Catalyst 6500 - DAI Configuration

Apr 26, 2012

Any step-by-step configuration guide of how to enable DAI on Cisco Catalyst 6500 Series Switches.

View 1 Replies View Related

Cisco Switching/Routing :: Configuration PBR On Catalyst 4503

Mar 4, 2012

i'm performing configuration PBR on catalyst 4503, but it doesn't work. [code]

View 21 Replies View Related

Cisco Switching/Routing :: Catalyst 2960G Vlan Configuration?

Oct 24, 2011

I have got a catalyst cisco 2960G series switch and via this switch I want to creat serveral vlans. I am getting a dhcp IP from a router and I want to setup my own vlan networks.
 
I plugged in the Ethernet cable that came from the dhcp router to port 16 of the cisco switch and configured the ports 1,2 and 3 for vlan 1, 2 and 3
 
the dhcp router has given me this IP 192.168.10.158 defautl gateway is : 192.168.10.1
 
when I plug in a PC to port 1 or 2 of the cisco switch I still receiving the IP from range 192.168.10.* but not from the range that I configured for the vlan 1 or 2.
 
Below is my startup configuration:
 
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id

[code].....

View 28 Replies View Related

Cisco Switching/Routing :: SPAN Configuration In Catalyst 3750

Dec 31, 2011

I have CISCO catalyst with VLANs (VLAN ID 33, 36, 40-53) configured. I need to configure port mirroring in Switch 3750 for NAC (Network Access Control).  I need to Monitor all the VLANs. Here is the SPAN configuration of switch: [code] Monitor session 1 source vlan 33 , 36 , 40 – 53.Monitor Session 1 destination interface fa 1/0/8  (here I am not able to set encapsulation dot1q ) because the error occurred saying %one or more dest port do not support the encapsulation%.

View 5 Replies View Related

ADVERTISEMENT