Cisco Infrastructure :: Poor Performance On Catalyst 4006 Sup II
Apr 3, 2003
I have a Catalyst 4006 with Supervisor II engine. I have 48 port 10/100/1000 blades installed in it for connection to my servers. I am having a lot of problems with performance when connecting servers that are using 100 MB NICs. The speed of the connection is really bad. I have attempted setting the ports and NICs to 100MB Full duplex instead of auto-detect, but still get the same results.
I also have a 10/100 quad-port card installed in a NetApp filer. All four ports are trunked together and connect to 4 ports in the Catalyst. The ports in the Catalyst are trunked using the Port Channel feature of the CatOS. When I look at the port statistics on 3 of the 4 ports from the quad-card, there are a ton of runts and errors (both transmit and receive). The 4th port is fine, no errors.
View 2 Replies
ADVERTISEMENT
Apr 12, 2005
Is it possible to enable login by http (web interface) to catalyst 4006 switch with WS-C4006 Software, Version NmpSW: 6.3(5) ?
View 21 Replies
View Related
Oct 23, 2011
i have a problem with a 4006 switch, when the poer goes out and comesback, the switch doesn't boot, you have to get in the console and type boot, the config register is 0x102, i try to change it but it did not let me, said somethong like usage, what can i do to configure the booting automatically
View 1 Replies
View Related
Jun 11, 2012
My existing 4006 chassis is using Supervisor III (WS-X4014). I have another 4506 chassis using Supervisor IV (WS-X4515) and a Net flow Services Card (WS-F4531) build on top of it.
I need Net flow Services Card in 4006, so can I just replace the Supervisor IV (WS-X4515) used in Cisco 4006? Is it compatible with 4006?
View 1 Replies
View Related
Nov 28, 2011
we got a problem with our cat4006 coreswitch. The led on the supervisorengine is red, and several errors are appearing in the message log. [code]
View 1 Replies
View Related
May 1, 2011
having a very strange problem with a Cisco 1861 running - Cisco IOS Software, C1861 Software (C1861-ADVENTERPRISEK9-M), Version 12.4(24)T5
The issue -I have suddenly started to get performance issues with downloads and access through the ZBF. Without the firewall enabled and just having NAT enabled and routing , downloads perform as expected - ( have been using Itunes download as test file ) - with the ZBF enabled , and the necessary rules installed to inspect & allow traffic - downloads stall - and the only way to get the downlaod to start again is to pause , then resume. The stalls are anything between the first 25 - 120 secs.
I have debugged and performed packet traces - but cant see anything untoward. I have also placed another router ( just a cheap Belkin ) on the ADSL service and again , the downloads work as expected.
one further thing to add is that when im tunneling through the firewall ( VPN ) , then downloads do work as expected - suggesting that the issue is with native HTTP(s) traffic.
I have upgraded from T4 to T5 - and the symptons still remain - I am thinking that these may have been introduced when i upgraded to T4 a few monthes ago.
View 3 Replies
View Related
Nov 30, 2012
I run my virgin broadband through an old NTL modem and a Belkin router. I haveit all attached to a computer in my study along with a new 6TB Buffalo Nas drive. The computer has GIGABIT LAN. I use Belkin powerline units to relay the network around the house. In my lounge i have a blu ray player, AV amp and my sky box attached to the network via the Belkin powerline units and all run ok. This week i have added a Cambridge audio streamer but i am suffering now from a lot of dropouts and network failures escpecially when trying to stream music from my NAS. all seem to be set up correctly as per the manuals. I have spent a lot on this unit specificallly to stream my music so this is really important to get working correctly The powerline units can flash blue (fast ) or orange (slower) but i only see the orange light .My local dealer says i need to upgrade my Modem/Router and has suggested an ASUS RT-N66U which I understand is a modern 2.5/5ghz model . he says my system is overloaded
A few questions.
Is this a suitable modem for me to use on my Virgin cable broadband? (apparently there are two alternatives types of modem/router)
Is there a better alternative unit ?
Could there be another cause for my problems and if so how do i diagnose them ?
View 7 Replies
View Related
Feb 5, 2012
I replaced a Dir-655 at a coffee shop, with a new dir-655 a few weeks ago. They keep calling and saying that Windows clients are not working and that Mac clients do.My first thought is that they are overloading the router but I would think that all computers would have problems not just the Windows computers. could the router be so bogged down that it takes to long for DHCP request for windows computers assigning the IP twice?
View 1 Replies
View Related
Nov 13, 2011
We use MS RRAS services behind a Cisco ASA 5520. In testing the performance I have found that we can only get a little over 2MB of througput when connected to the VPN server over a broadband connection. I have verified that the issue is not the RRAS server itself as I can connect to VPN from the LAN and the througput tests at 300-400MB. I also connected to the LAN directly on the outside of the firewall and only get 4 or 5 MB from there which does not seem right. None of the switches are showing any errors. I believe that I have the passthrough stuff setup as I should. I even went through these steps as recommended by Cisco.
hostname(config)# class-map pptp-port
hostname(config-cmap)# match port tcp eq 1723
hostname(config-cmap)# exit
hostname(config)# policy-map pptp_policy
hostname(config-pmap)# class pptp-port
hostname(config-pmap-c)# inspect pptp
hostname(config-pmap-c)# exit
hostname(config)# service-policy pptp_policy interface outside
View 7 Replies
View Related
Apr 4, 2011
I am using 2 WAP4410N in bridge mode with WPA2 Security.The bridge seems to be stable but i get poor transfer rates.Distance between devices ~ 8m - nothing between.Wireless networkmode: N-Only, Channel: Auto, Channel Bandwitdh: 40MHz (also tried auto and 20MHz)Firmware 2.0.2.1 because got different problems with 2.0.3.3One side is connected to my LAN other is connected to a notebook.
View 1 Replies
View Related
Aug 24, 2012
I recently purchased an EA4500. It started out working really well, but recently I noticed that my speed on my iPhone and iPad has dropped significantly. When I'm in my office where the router is set up, I'm getting around 15 to 20 mb download speed and 5+ upload speed. When I go to my living room about 40 feet away my speed drops to 1mb down and less than 1 up. I expect to see a drop in my performance the further away I get from the router, but this seems really unacceptable to me.
View 1 Replies
View Related
Oct 9, 2012
The wireless connection barely registers in the Speed Test within Cisco Connect - .56 download, 5.35 upload. A cable connection gives 2.4 download and 5.5 upload. The E900 is not far from the computer with no obstacles between.Is the wireless portion of the E900 set up improperly? Is there anything I can do to improve the wireless performance?
View 4 Replies
View Related
Jan 1, 2013
I have 2 RV042 routers with identical firmware (1.3.13.02-tm) and settings. One router is a backup that sits in a box, but both experience this problem. The WAN port gives very poor performance most of the time. Download speeds range from normal, 25mb, to less than .5mb. Pings from my command prompt or the routers "Diagnostic" page, even to the cable modem, are almost always above 500ms. However, pings to internal resources are fast, usually under 5ms. If I connect my laptop directly to the cable modem I have no speed issues. The problem occurs whether I use WAN1 or WAN2.
If I restart the router, speeds are fine for a few seconds and then it begins to slow down like someone is turning down a dial. We also regularly experience a complete internet disconnect quite often, and when it happens, the ping results are the same when it comes back up, almost like the router is restarting itself. [code]
View 1 Replies
View Related
Dec 5, 2011
We have two Cisco AP541N running our wireless network in the office. They're configured with the same SSID, so that people are automatically switched between the two access points depending on their location in the office.
Frequently we are experiencing very poor performance of our wireless connections and it seems to be related to when 4-5 clients are connected to one access point. After restarting it (which also moves the 5 clients to the other access point), the performance problem goes away for a while.
I've upgraded one to firmware version AP541N-K9-2.0(1) (the other is running AP541N-K9-1.8(0)), but it doesn't seem to work.
View 1 Replies
View Related
May 16, 2013
A few days ago I received my DIR-655 I ordered off Amazon and hooked it up. There were no problems the first day after initial setup. The next day I noticed that I was losing internet connection even though the wifi indicator on my laptop said otherwise. This happens for about 5 minutes at a time and on other devices such as my desktop and my iPad. And I hopped on Call of Duty last night and played a competition with some friends and gave everyone 4bar connection. Later that night, I was playing some more and people that connected to me received 1bar connection and I got that in return on their connection. I feel that the router isn't working with my devices right?
View 4 Replies
View Related
Jun 15, 2011
We have recently purchased some Cisco 3750x switches and we are getting complaints from users that the performance is poor when both the PC's NIC and switch port are fixed at 100/Full?
There are no errors or collisions on the switch interfaces so there is no obvious problem on the switch. The PC's are standard DELL Optiplex 755/760's
or gx 520's.
Any performance issues when configuring the switchport to 100/FULL?
View 2 Replies
View Related
Jun 2, 2012
I have upgrade firmware of E1500 to latest release to version 1.0.04 and found out bad performance of the router QoS.
View 6 Replies
View Related
Sep 28, 2012
I have EA4500 acting as a router on domainless all-Windows network of two XP machines.Unfortunately, EA4500 aggressively grabs the role of the Master Browser (I am talking about Computer Browser Service) on the network (regardless in which order you power the devices up) and then doesn't serve as a working Master Browser - both Windows machines stop listing the network computers in the "Network Neighborhood" and incur massive timeouts when attempting to view the listing.A quick look with 'browstat.exe status' reveals that indeed the router has announced itself as a Master Browser device, but returns errors when you query it.Quite predictably, without the router, both machinces figure out amongst each other who will be the Master Browser and everything works fine. The problems begin only when you add the router to the network.
1) Is there any way to make EA4500 work like a full-blown Master Browser (the one that not only announces itself, but also serves as such)? having a Master Browser integrated in "always-on" router would really improve the predictability of the network.
2) If not, is there any way to disable the Master Browser on EA4500? For now I managed to achieve that by assigning the router to different workgroup name, but this is lame, as I now can't connect a disk storage to the router and use it within the same workgroup.
View 9 Replies
View Related
Dec 6, 2012
We have a remote site connected to ADSL line with a Cisco 887VA router attached. This has been working fine for the last couple of months. However, recently, the site have started to complain of performance issues (network slow, applications disconnecting, etc)Looking on the router, we can see evidence of packet loss/timeouts from a simple ping to the internet e.g. [code]
However, we have logged the fault with our service provider and they return all line tests as clear but what is particularly strange is that they also report “and the SNR Margins are well within threshold levels (Upstream 11.5 and Downstream 15.0)” which, unless I’m misunderstanding something, seems to be completely different from what the router itself is reporting.Is there a reason why the service provider’s stats for Noise Margin would appear to be so different from what the router is reporting?
View 2 Replies
View Related
Dec 17, 2011
Im getting really poor performance on my 1841, my intial thoughts was a duplex mismatch however although im getting a few CRC errors (root cause unknown at this point) not enough to suggest that the this is the issue.
Heres the config:
Building configuration.Current configuration : 5274 bytesLast configuration change at 20:31:01 PCTime Sun Dec 18 2011 by admin_xversion 15.1no service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msec localtime show-timezoneservice timestamps log datetime msec localtime show-timezoneservice password-encryptionservice sequence-numbers!hostname xxxxxx!boot-start-markerboot-end-marker!!security authentication failure rate 10 log
View 7 Replies
View Related
Sep 29, 2012
I am backing up massive amounts of data to the cloud. Everytime I do this, the wireless performance on my EA4500 seems to degrade to half its throughput. I am using the 2.4 GHz band.
View 9 Replies
View Related
Nov 20, 2009
I have a Catalyst 4006 switch in production and a spare switch of same model. I have to quickly copy the configuration from production switch to spare switch (both L2 and L3 configurations) How do I do that?
View 6 Replies
View Related
Jan 1, 2013
We have several of the SG300 Serices switches. We use them to route VLAN traffic to Remote Offices, Internet Connections, and WiFi Access Points.In one remote office we have a SG300-10 setup to route the HQ Network and the remote Office Subnet. The SG300 is Connected to HQ via Fiber and has multiple Tagged VLANs on it. If I do speed tests over the Fiber Link on the Incoming Tagged Netwotk I get Decent performance, 80Mbs. If I switch to a networtk that is not priginating from HQ, and have the SG300-10 route packet, I get dismal performance. 15-20Mbs.
I Fireded up a New SG300-28P FW v1.2.7.76. Added a the HQ VLAN 101 and new VLAN 1025 . Mapped some Tagged and untagged ports for each. Switch was connected to HQ Network as untagged VLAN 101. I put a laptop on an Untagged VLAN 101 port. Ran some tests, cam back with 750-850Mbs. Great. Put the same laptop on a Tagged 101 Port, Configured the NIC for Tagged VLAN 101, Same test, same Speeds, 750-850Mbs.I then Configured laptop for Tagged VLAN 1025. Connected to tagged VLAN 1025 port. Ran speed tests, resuts were 15-20Mbs!
I then Configured laptop for Untagged VLAN 1025. Connected to unagged VLAN 1025 port. Ran speed tests, resuts were 15-20Mbs!It was only the Laptop and the Connection to the HQ net on the SG300-28P. Why is the performance of this unit soooooo poor when it needs to route?Other Switches have FW v1.0.0.27 or FW v1.1.2.0. They have Similar speed issues. All Configured for Layer 3.
View 10 Replies
View Related
Jan 23, 2012
I am having poor performance through an IPSec VPN between two Cisco ASA 5505s. In researching, I found some discussion about setting the MTU for the VPN. So from one side of the VPN tunnel, I tried pinging a host on the other side specifying the Don't Fragment flag and testing different packet sizes. I found that a size of 1398 is the largest packet size that results in a successful ping.So, I also understand that I should be able to set the MTU to 1426 (1398 + 28 bytes for the IP and ICMP headers). What I'm not 100% clear on is where all I need to set this. Do I set the MTU for the outside interface of the ASA that the VPN tunnel is going through, or do I also need to set the MTU for the inside interface, or on the outside interface and the switch port that the interface is connected to (switch port is set to an MTU of 1500 as well)?My thoughts are that only the outside interface of each ASA needs the lower MTU (currently set at the default of 1500).
View 1 Replies
View Related
Aug 24, 2012
I purchased a new ap1041n access point. It's the first Cisco I've tried to configure in a long time. I'm trying to get the 802.11n working but it seems to be stuck in 802.11G since I can only get it to go up to 36mb. The radio says its running in mixed mode and I can't figure out if that means b/g or b/g/n. I ran the Express Setup and it didn't seem to work.
View 5 Replies
View Related
Feb 15, 2012
We have a switch Cisco Catalyst 2900 Series XL Model WS-C2924-XL-EN. 8 MB DRAM 4 MB FLASH
I already tried the discussions regarding flash_init dir_flash: boot and the likes.
By the way, I already downloaded the IOS for our switch through Cisco Website. Settings are default through Hyper Terminal
Here's the thing:
Whenever I transfer the .bin file using XMODEM, it prompted an error "Transfer cancelled by remote computer"
View 3 Replies
View Related
Dec 17, 2012
i have few catalyst switches (2960, 3750) and i can't upload to them any files by tftp from my laptop, but i can download from them, and this bug don't appears on two routers.I was change tftp server, type of connection (wifi, cable), turn off firewall on win7, but no dice.
View 2 Replies
View Related
Mar 11, 2003
I need to do one Catalyst 5500 as a TFTP server.Can I do it?Is the catalyst available to be a tftp server?
View 4 Replies
View Related
Feb 10, 2013
I need to configure on a cisco catalyst 6509 two VACL. On cisco 6509 there are already two SPAN ports configured, there are problems configuring other two VACL?
These VACLs send traffic to a Traffic Analyzer (SIEM), there are particular configurations to facilitate the operation?
View 1 Replies
View Related
Oct 11, 2011
I want to know the difference between the software that is Modular and the one that is not. What are the pros and cons ?
CAT6000-SUP32 IOS ADVANCED IP SERVICES SSH or CAT6000-SUP32 IOS ADVANCED IP SERVICES SSH (MODULAR)
View 1 Replies
View Related
Nov 15, 2005
My switches is still operating but when i ping the switch, there isn't any reply. No icmp reply from catalyst 2950 switch
View 6 Replies
View Related
Mar 1, 2006
Does it have this switch some port mirroring capability (SPAN or other)?
View 2 Replies
View Related
Jul 10, 2011
We have the next Settings in our SW. We crate an ACL and aplied to a SVI for Incomming Traffic, I understand that is not necesasry to allow the returning traffic in ACL, but we can't access to rdp for example when we add the ACL, if we remove it, the acces is ok, buet when we add again the access is deny, even we have a log entry, and the ACL i just for Incomming traffic. There is no another ACL.
See attached file
[code]...
View 1 Replies
View Related
