Cisco WAN :: ASA 5510 - Ping Gets Through But Phone Unable To Register?
Jan 31, 2011
I have to sites connected togather using 4 MBps Link over the tunnel terminated on asa 5510,the call manager in site 1 and the other users on the site 2 unable to register with call mamager on site while i have a suceesull ping goes from site 2 to site 1 (call manager ip) so why this phone its not registered ,so in term of network no problems coz the ping gets through and am rely on ping to confirm that no network problem
----is there any udp traffic problem that prevent the phone registration
View 20 Replies
ADVERTISEMENT
Mar 30, 2012
I am trying to implement a small VoIP LAN (you can see the lan in attachments)for a personal project. I am using:
- 2 x XP (on which i installed Cisco IP Communicator 7.0.3.0)
- 1 x Ubuntu (running GNS3 with a c3600 Router)
The problem is that the phone which is not in the same LAN with the tftp server cannot register.
1) Can a phone register to a tftp server from another LAN ?
2) If the answer for 1) is yes, what am i doing wrong (you can see the details in the attachments)? I mention that the ping works well anywhere in the LAN.
View 11 Replies
View Related
Jun 25, 2012
We have had a successful site to site vpn working for several months now. It is an ASA 5510 at HQ to a ASA 5505 at a branch office in another state. We just added a second site to site vpn in another state this time from HQ to a Sonicwall TZ100. After plugging in the Sonicwall to the Qwest modem in bridge mode the tunnel came right up. I was unable to to ping any off the private IPs at HQ from the new branch, but was able to use remote desktop into the servers and workstations at HQ. Also all the computers show up when browsing the network from the new branch.
At the first branch we are able to ping both ways and use remote desktop both ways.When using packet tracer in ASDM on the HQ ASA and pinging from one of the IPs in the HQ protected network to an IP in the new branch network NAT-EXEMPT looks good, but when it hits the first NAT it matches on the "dynamic translation to pool 10 (10.1.255.254) [Interface PAT]" (which is the default route for all the vlans to get to the Internet.)The next NAT (subtype - host-limits) looks better and this one going to the IP address of the outside interface of the HQ ASA 5510, but then the third NAT (Subtype - rpf-check) reverts back to the "10 (10.1.255.254) Interface PAT]" and the packet is DROPPED. Also there is no VPN step in Packet Tracer after NAT.[code]
Is the problem possibly due to the fact that my 2 new ACLs for "encrypt_acl-30" fall after "access-list global_mpc extended permit tcp any any" in the config and it is running into the implicit deny all?
View 8 Replies
View Related
Mar 31, 2011
We have two ASA5510s, each with outside interfaces to the same two ISPs (different IP addresses within the same subnet, of course). Both ASAs allow ICMP on all (inside and outside) interfaces. One ASA's default route is to ISP-1 and the other is to ISP-2. We can ping the default gateways for both ISPs from only one ASA. From the other ASA, we can only ping the default gateway for the default route but not the other. The pings originate from an inside client, first configured with the default gateway for ASA-1, then for ASA-2. Why does this happen, how do I troubleshoot something like this and how do I fix it?
View 1 Replies
View Related
Nov 27, 2012
One of my client has BSNL leased line with LAN IP POOL we configured those on ASA 5510 nad Internet working fine but from cloud we are not getting any response for ping requiest please find running configuration below:
ciscoasa(config)# sh run
: Saved
:
ASA Version 8.2(1)
[Code]....
View 4 Replies
View Related
Dec 26, 2012
I am using PC to mobile dialer. It was working fine but now I am unable to login to my wowcall account due to error - Unable to register to SIP server.
View 1 Replies
View Related
Dec 6, 2011
I have installed 2 ACS 5.2 appliances, the two appear as Primary. When I try to register one of them with the other one using "System Administrator -> Local Operation -> Deployment Operations" I get the following message:
This System Failure occurred: Unable to authenticate with node.. Your changes have not been saved.Click OK to return to the list page.
I have tried with both "ACSAdmin" and "admin" users with their respective passwords.
View 3 Replies
View Related
Jun 11, 2012
Today I ran a failover test between our primary and secondary ACS systems (ran 'acs stop' on the primary) and in the process decided to promote the secondary while I had the primary down. All was fine until I brought the primary back up and tried to re-register the secondary to it. I get the following error message: I went into System Administration >Operations >Distributed System Management on each and it showed the other device as deregestered, tried to promote from there but it failed too, so I deleted them and tried to register the secondary again. After that didn't work I tried rebooting both but that didn't work either. I know the user/pass I'm using is good and I've tried using both the IP address and the hostname.
ACS/admin# sh app version acs
Cisco ACS VERSION INFORMATION-----------------------------Version : 5.3.0.40.5Internal Build ID : B.839Patches :5-3-0-40-5
View 3 Replies
View Related
Oct 19, 2012
i'm stuck at registering inline posture node to primary node. I doing fresh install both ISE appliance using version 1.1.1, patched all 3 available patach version after install. AD and DNS were perfectly configure, ping using hostname able to resolve Everything set, so both PSN and iPEP generate CSR and ready to let CA server to signed. But anyway this is the outcome i get Error message "Unable to authenticate. please check server and CA certificate."
01. - What certificate template to be use primary node and inline posture node? I having problem the CA certsrv won't show computer template for inline posture node. can i use web server template and on the extension include client autthenticaiton andserver authentication on this case?
- What certficate template use for primay node CSR?
02. According to Cisco ISE user guide 1.1.1, it mentioned "Creating certificate trust list in Primary ISE Node"
So first action is importing Root and CA certificate . my rootCA.cer import to certification operation certifcate store, while CSR generated then Bind CA certificate. question, should i check anything like "Tust for client authentication" checkbox or any other option to be check? How about Inline Posture node, should i export the CA certificate and import to primary node's certificate store?
View 3 Replies
View Related
Oct 10, 2008
I am having problems with my RV042.I have a Intervoip(url...) account for VOIP.
When I try to register the intervoip account to the internet I don't get any kind of reply. My VOIP server just keeps requesting to register the SIP account, but gets no reply.
When I connect an other router to my ISP modem, the register just goes fine. However the RV042 blocks something I don't really know what the cause could be.I installed wireshark to monitor my network traffic.
When I monitor registering with intervoip with the RV042, I see requests but no replies from intervoip, the VOIP server keeps requesting, but doesn't get any reply.
When I monitor registering with intervoip with an other router, I see requests from the VOIP server, and replies from intervoip initiating my intervoip account and everything goes well and registers. The following I tried:
- Forwarding port 5060 to private ip
- Putting private ip in DMZ
- Disabled the firewall
All without result. (Also tried them all at once)
View 8 Replies
View Related
Jan 18, 2013
From My Router that connects to Cable modem i am unable to ping website 4.2.2.2I am able to ping all other websites fines.Same website i can ping from my pc and all other switches fine.Router has only 1 ACL thats for NAT.
View 25 Replies
View Related
Nov 12, 2012
I could see ping loss whenevr i ping to Ip of the phone which is connected on 3750 Switch.
Port is part of data vlan and voice vlan...
interface GigabitEthernet1/0/2
switchport access vlan 10
switchport voice vlan 100
[Code].....
View 5 Replies
View Related
Apr 4, 2012
I have an ASA 5510 running 8.2.2 code with 30 VPN Phones connected. Of the 30 phones, I have 5 that do not negotiate DTLS and I'm having quality issues with these phones. I've checked the login process and I don't see any errors when these phone connect, they just don't even attempt DTLS. All the phones use the same VPN configuration.
View 4 Replies
View Related
Feb 21, 2013
I am just getting more confused the more I try to work it out. Not sure if this goes in the IP Telephony section or here. We have an ASA 5510 with the base license. We are needing to install IP Phones at remote workers homes, and I understand there are Cisco IP phones which have VPN clients built in to allow a tunnel to the central private network. IT appears that you can only use Any connect VPN for this, ans I am trying to work out what licensing upgrade we need to apply to the ASA, as the two Any connect licenses you get free on the ASA is not enough.
This is the phone we are looking to get; {URL} . What I want to know is will the Any connect Essentials license work with these IP phones? When I do a show version,
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 50
Inside Hosts : Unlimited
Failover : Disabled
[code].....
This platform has a Base license. It shows "Any Connect for Linksys phone : Disabled", is this the same for Cisco IP Phones? Is this the specific licensing type I should be looking to get for Any connect on IP phones or will Essentials do?
View 4 Replies
View Related
Dec 11, 2012
I have configured anyconnect for phone at ASA 5510. Phone can connect to Corporate network through VPN from outside without any problem.
If I connect laptop to PC port at phone, I can run anyconnect client at pc and get vpn connection through phone. Can I get VPN connection for laptop through phone without running anyconnect client at the laptop i.e. can phone share VPN connection for laptop at PC port?
View 1 Replies
View Related
Jan 21, 2012
I am unable to receive files from my phone via Bluetooth.Never had a problem before on vista,but my hp pavilion g6 will not receive files.I used to rgt clk on bluetooth symbol + receive file.Don't have this option on 7.
View 1 Replies
View Related
Sep 8, 2012
Today we physically moved an ASA 5510 across town and took another location off of fiber and onto a VPN with the asa 5510, via a brand new 5505. The VPN seems to be up however no local traffic seems to be passing. The ASA 5510 can ping to the internal network of the 5505 but not vice versa.
The site that was moved is the 62.0 network, it is connected to the rest of the network through the new ASA 5505. I'm sure this is something elementary that I somehow missed.
View 16 Replies
View Related
Dec 3, 2011
I have installed the Phone Remote software [URL] on the torch and playbook but am not able to pair them together.The FAQ's and directions have been followed painstakingly but have not any success. My router is knowledge is basic but read through the manual and have been searching the net for answers. I have uPNP enabled and no firewall.
View 2 Replies
View Related
Jan 30, 2013
I have recently got our Cisco engineer to create a VPN connection to our network through a ASA5510. I am able to ping all devices on the network bar two servers (2xW2K3, one configured with AD/DNS and the other is a AD/file server) using IP addresses ,However, I cannot ping any devices using host names. The engineer has entered in the correct IP address of our DNS server, but still we have this issue. As the VPN client cannot ping the DNS server, it is unable to resolve the host names, but I cannot seem to work out why we cannot ping the DNS server.
View 1 Replies
View Related
Feb 23, 2012
VPN between datacentre & office ASA 5510 & HP routers site-to-site vpn, 192.168.1.0 и 172.16.0.0 networks If I ping internal routers' cisco address 192.168.1.1 from 172.16.0.0 network host (172.16.2.200) I get ping timeout At the same time I see the same messages in ASDM monitoring when successful ping reaches and comes back to 192.168.1.0 host (192.168.1.101 for example) Pings from 172.16.0.0 to 192.168.1.0 hosts are ok, only 192.168.1.1 is silent Looks like icmp echo reply is not allowed or smth like that, where to take a look?why monitoring looks ok instead of denied according to ACL...?
View 2 Replies
View Related
Nov 15, 2011
I have a VPN client running on a laptop connected a DSL circuit. The VPN client is configured correctly for an external address on another firewall, this external firewall passes through ISAKMP / IPSEC to an ASA where it terminates. The client authenticates and gets an address from the client pool (VPNCLIENTS – 10.2.16.x / 24) and the tunnel completes with no problems. From the internal ASA I can ping any internal network behind the 10.0.3.240 interface (INSIDE) and I have a route on the inside network to get to the 10.2.16/0 clients to point to this address (10.0.3.240). All good so far.
Now the problems begin. I cant ping anything from the VPN clients (10.2.16.0) network to anywhere, I cant ping any interface on the ASA or any internal network. I also cant ping the client from the ASA and therefore not from the internal network either. This configuration is bare bones configuration so I don’t even have the NAT exception rules added. Network diagram attached too.
interface Ethernet0/0
nameif outside
security-level 0
[Code]......
View 3 Replies
View Related
May 30, 2012
I had a pix that had two working tunnels going to one 5510 and one 5520. Today the VPN tunnel to our 5520 stopped working but if I do sh cry isa sa both tunnels have QM_IDLE as the state. (both ends) I tried to debug crypto isakmp 255 but all I get is PEER_REAPER_TIMER and no other output on the pix side.
View 20 Replies
View Related
Oct 23, 2011
i am unable to setup a Bluetooth connection between my nokia phone and my Dell inspiron N 4500. I am currently using windows 7 and the bluetooth icon in the Device manager window is unavailable.
View 5 Replies
View Related
May 4, 2012
I have two inside interfaces (both security level 100) inside and inside110. Inside is 192.168.105.3/24 and inside110 is 192.168.110.3/24. I have a PC on the 192.168.105.0/24 network. I cannot ping the 192.168.110.3 IP of interface inside110.
View 2 Replies
View Related
Mar 4, 2011
I currently have an ASA 5510 unit. I have a dmz setup which house some web servers and an inside interface. The web servers contain multiple public ip addresses which I have natted and access is fine.What is the most simple way to enable ping for my dmz from the outside. Meaning if someone outside the network pings one of the servers by its public ip address I would like it to respond to ping.
View 1 Replies
View Related
May 27, 2013
I have an ASA 5510 with the configuration below. I have configure the ASA as remote access vpn server with cisco vpn client, my problem now is I can connect but I can't ping.
Config
ciscoasa# sh run
: Saved
[Code].....
View 14 Replies
View Related
Sep 19, 2012
I have recently installed an ASA5510 at a site in South Africa to connect via VPN to a site in the UK (ASA5520). The VPN comes up fine with the 5520 in the UK, however, I can not connect to the inside interface over the VPN, but can access it from the internal LAN. All other hosts on the LAN are accessible over the VPN.
The 5510 also has another VPN to another site in SA and the 2nd site cannot ping the interface either.
View 10 Replies
View Related
Apr 9, 2012
II have a management network 192.168.5.x and VPN network 192.168.25.x. I can ping a all my network elements except to firewall (ASA5510). The ASA has the IP 192.168.5.1. I think that the firewall has some restriction but I don't know. I have 8.2 software and any connect 3.0 and work fine. If I am in the management network (192.168.5.7), I can ping to firewall. The restrict is with the VPN network.
View 4 Replies
View Related
Dec 9, 2012
Background: I have a couple of ASA 5510's I'm going to put in our lab environment. I have restored them to default config and set up the m0/0 interface with an ip/mask and started the http server. My lab environment is on the 10.45 subnet and my .com corporate environment is on the 10.40 subnet. I've also setup DNS and, from the ASA, can ping anything in the 10.45 subnet.
The problem, is that from the ASA, I can not ping the internet or my 10.40 subnet. And vice versa, I cannot ping the ASA from my 10.40 subnet. When I bring up a regular server, there is no special configuration I need to do as those subnets talk to each other and nothing is restricted.
Is there something special I need to do go get it to work? I tried adding a access list to allow icmp, but that didn't seem to work.Oh, and I'm getting to the ASA by RDPing into a lab server (on 10.45) then putty to the ASA.
View 7 Replies
View Related
Jan 11, 2012
I have recently made some chages to my ASA 5510 (not sure what) I was previously able to ping url... and I am now not able to ping anything on the Internet, but The Internet connectivity work perfectly.
View 7 Replies
View Related
Apr 13, 2013
I ran into a very strange icmp ping issue. The network has been working fine other than the issue listed below, L2L VPN works fine and all three data centers can access each other via L2L VPN.I have three ASA5510. [code]
View 5 Replies
View Related
Jan 9, 2012
The VPN will connect.I can ping and connect to the ASA 5510 on it's LAN interface.My problem is that I cannot ping or access anything on the LAN past the firewall. What am I doing wrong?
Here is my config.Result of the command: "show config"
Saved
: Written by enable_15 at 22:55:02.299 UTC Tue Jan 10 2012
!
ASA Version 8.2(5)
!
hostname ********
[code]....
View 1 Replies
View Related
Jul 26, 2011
I'm configuring ASA 5510 Remote Access VPN, I can connect from Cisco VPN Client to the ASA VPN. I obtain from ASA some routes to inside networks, but I can't do any ping to those inside hosts. I have got those error in ASDM log file: [code]
View 1 Replies
View Related
