I have a cisco AP1242AG-A-K9, I would like to set it up to connect to a proxy server inside of the US. Does any know if this is possible?
I would like my IP Adress through the router to be a IP Address based in the states, thus the proxy server would achieve that. I can do this on my PC, but I would like my router to do it, then all the devices on the network to do that.
We have Cisco ASA 5505 with ASDM 5.2 We have one Proxy server in our Local Lab and pointed to Hosted service(Simple Signal)issue is, When our proxy server send register to hosted server, ASA change private IP and post with outside IP and src port as 1063 every time.
Here is debug log on real time monitoring.
Aug 24 2011 05:21:19 302015 203.xxx.xxx.226 192.168.1.51 Built outbound UDP connection 3774 for outside:203.xxx.xxx.226/5060 (203.xxx.xxx.226/5060) to inside:192.168.1.51/27014 (99.119.161.107/1142)
Aug 24 2011 05:21:19 607001 203.xxx.xxx.226 Pre- allocate SIP Via UDP secondary channel for inside:192.168.1.51/27014 to outside:203.xxx.xxx.226 from REGISTER message
Aug 24 2011 05:21:19 710005 203.xxx.xxx.226 99.xxx.xxx.107 UDP request discarded from 203.xxx.xxx.226/5060 to outside:99.xxx.xxx.107/1063
Here 99.xxx.xxx.107 is Our ASA Outside IP address 203.xxx.xxx.226 is Hosted server IP address. My ASA config is attached.
I have seven autonomous AP1242AG (c1240-k9w7-tar.124-25d). Can I configure them to a mesh without WLC? [code]
View 2 Replies View RelatedWe just got (2) Air-lap1242ag-a-k9 units here and i am also working on (2) air-ap1242ag-a-k9 units also.
my question is this, do the lap units function the same as the air-ap1242ag units?
if not, what will it take to make the lap units function like the ap1242 units?
Now i plan to order Wireless Cisco model : AIR-AP1242AG-A-K9 around 40 unit but i don't know to manage all AP becuase it has alot of AP,
View 9 Replies View RelatedI have a Cisco AIR-AP1242AG-A-K9 Autonomous AP running firmware 12.4(25d)JA. I wish to set up multiple SSID's (2) each having their own separate security types. Both security types may end up being WPA2, but would have separate keys. I do not have a managed switch, the AP is connected to a "dumb" switch in an office environment, with no VLANS. Also this is only for 1 access point.
I have tried creating 2 SSID's, but my issue is that only one SSID will actually work at a time, meaning that only the native VLAN in the AP will actually allow wired traffic through it's SSID. How can I set up 2 different SSID's, with 2 independant security types and have them work simultaneously? Is this functionality supported by this AP?I feel that this is possible, as I can easily set this up on other access points from other manufacturers.
I configured for basic with a single ssid and no security authentication open . so after the clients get connected an hour or couple hours the AP signal fall and I can't see the SSID ...
View 27 Replies View RelatedI have a few AIR-AP1242-E-K9 AP that I have upgraded to LWAPP, after the upgrade the AP's don't join the controller. But some AIR-AP1232AG-E-K9 on the same site joins without any issues.The controller is: AIR-CT2504-K9, SW: 7.0.220.0. [code]
View 8 Replies View RelatedAt the moment we have all our users going through a Proxy Server, Microsoft ISA but I want to know whether I could scrap this and utilise the ASA.
Would it be possible to create a Network Object with an IP range (Domain Users) and then have a list assigned to this of any Websites not permitted?
my internet connection has dynamic IP. So when I download some file from file sharing site, and if my internet connection breaks, my download can't resume from where it had stopped since my IP adress is changed.But if I stop the download manually (without breaking internet connection), as the IP address remains same, I can resume the download from that point. I mean can I use a proxy server so that everytime the download resumes, it reports a constant (static) IP to the website?
View 6 Replies View RelatedHow would I set up my own anonymous proxy server with my own ip address without having to go on a proxy list site? I don't care how complicated or time consuming it may be, I'm a very fast learner and I do things extremely quickly.
View 3 Replies View RelatedI'm looking to implement a single proxy server for two different VLANs. Both VLAN have outgoing traffic configured through different ISP i.e. traffic for users on VLAN1 is routed through ISP1 and traffic for users on VLAN2 is routed through ISP2. Inter-VLAN communication is enabled. The proxy server should route internet traffic for users in VLAN1 through ISP1 and for users in VLAN2 traffic should be routed through ISP2.
View 6 Replies View RelatedI have an Static IP address and I want to hide this Static IP address from users. But I dont have router I searched on internet and I got Winproxy software which can does this work but that is only trial version. How to hide my static IP? Any software like Winproxy which works on my server like proxy server i.e protect server from viruses, theft, hackers, Trojens etc.?
View 4 Replies View Relatedhow to block all proxy server websites in my router ( netgear brand ) so that no one can access anymore to the websites that i already restricted like facebook.
View 2 Replies View RelatedMy computer (Win 7) is behind a proxy server at work. They have disabled the ping service. They told me it is disabled for security reasons, and everytime I try to ping a host, the connection times out.However I normally use ping as a good diagnostic to check if I have an internet connection or not. We experience frequent network problems, and I'd like to be able to at least narrow down the problem each time. Are there any other diagnostic tools/utilities I can use to test internet access? When I lose my internet connection, I'd like to be able to test if it is because my computer has lost its connecton to the proxy server, or if the proxy server has lost connection to the outside world.
View 6 Replies View RelatedMy ISP provides me internet connection through password protecting Access Point bearing IP address 192.168.20.1 built with IP filtering which allows only a particular IP 192.168.20.88. I am not able to access internet on more than one computers simultaneously because router allows only single IP and I am not sure what are the WAN IP's uses Access Point provided by ISP eg. IP, Gateway and DNS. My ISP provides me static IP address for home computer as mentioned below :
IP : 192.168.20.88
Gateway : 192.19.20.1
DNS: 192.168.20.1
Alt DNS : 192.168.20.1
My public IP address is 180.87.210.26.
Is there any option to add a router to bride or configure router as proxy server so that i can access internet more than one PC's simultaneously.
currently we are using a proxy (192.168.45.90) for internet. the internal network ip scheme is 192.168.30.0-254. my problem is that how should i configure the new ISA2004 installation on separate PC with new IP range like 192.168.31.0-254 using that proxy 192.168.45.90.
View 1 Replies View RelatedAfter cleaning the infection, none of my browser will work.Firefox display this message: "The Proxy Server is Refusing Connection".IE displays an error as well.I can't even use Steam's (game client) browser to see what games they have available but I am able to sign on.I am sure my internet is working because I am able to log on to my Instant Messaging Program and chat with freinds and use a VoIP software to talk with friends without issue.The problem is happening on my "regular" windows account.My administrative account seems to be problem free as I am able to browse the net like I had before the infection.
View 11 Replies View RelatedWe have a SRP527W with 1.1.24 firmware.
We have DHCP disabled and have assigned a IP address of 10.65.73.254 on the Interface Setup/Lan/VLAN Settings/data_lan.
When I configure a client to use 10.65.73.254 as its DNS server it cannot resolve hostnames eg [URL]. Obviously I have 10.65.73.254 as the default gateway on the client and it can ping the external host via IP Address so it only appears to be the modems function as a DNS Server that is not working.
From the diagnostics ping I can put in [URL] and it resolved and works, so the modem is correctly getting it's DNS Settings from the ISP
how to make a proxy server in o.s server 2003
View 1 Replies View RelatedHave nearly new desktop running Windows 7 and cannot connect to Internet (BT broadband in wireless mode). Error message says 'cannot connect to proxy server'.
View 4 Replies View RelatedI am using a proxy server with 2 NICs for sharing internet connection to my 100 desktop users in my office. NIC 1 is connected to my dsl modem and NIC 2 is connected to a main switch and further to more. But now i want to setup a wifi network for laptop users. I have enabled ICS on NIC 1 and NIC 2 has acquired it ip automatically (192.168.0.1) so the gateway for my desktop users is (192.168.0.1). But i want to use a new gateway. For this i have installed NIC 3 but it is not acquiring the ip automatically. My Proxy server configuration is: MS Server 2003 ENT edition.
View 2 Replies View RelatedI have a wireless router and own net work at my office I would like to be able to set up a proxy server in order to prevent certain users from reaching specific sites.
View 1 Replies View RelatedIs it possible with the DIR-601 to have one of the IP's on the LAN route all traffic through a proxy server? I would like to have my Roku device (which I've setup as a static on the LAN side) to always connect though a proxy, while all my other devices connect to the internet normally.
View 3 Replies View RelatedIn my office environment, my machine is configured with an IP address, Subnet Mask and a Default Gateway. The Default Gateway does not allow internet connectivity but is configured to provide us with connectivity to some server based tool.
Now in order to provide us with the internet access, a proxy server is configured via the LAN settings in the IE. The problem here is the Proxy is restricted for some sites that I need like certain technical blogs and all, which it filters out in the blogs category and does not load.
I do have another Gateway server address that I can use in Local Area Connection IPv4 Properties as Default Gateway address which removes this restriction. I thought that this should be configurable to the LAN Settings as a proxy as well. But when I do so, I lose the connection to the internet.
I am not sure if all Gateways can act as proxy servers. Or is there anything that I am doing wrong. I am using the default port 8080 in LAN Settings.I can ask this from the technician but I am not sure if he would be able to answer that as he is just a first level guy. I thought of figuring it out myself.
I have ASA5505 with bese-license. I like to install proxy sever in my network and i want redirect traffic to the proxy server.
Below i added configuration in my firewall.
ASA(config)#access-list wccp-servers permit ip host 192.168.6.10 any ASA(config)#access-list wccp-traffic permit ip 192.168.6.0 255.255.255.0 any ASA(config)#wccp web-cache group-list wccp-servers redirect-list wccp-traffic ASA(config)#wccp interface inside web-cache redirect in
furher configuration and if this configuration is enough, then how to check whther its working or not in my firewall.
I have a VPN setup thru a Cisco 5520, Windows clients connect just find and the end users configure there browser to use our internal proxy servers. Users with the MAC OS X Anyconnect client can connect, they configure their Mac to use our proxy server, but the broswers will not work, clients can reach networks and resources behind the VPN gateway and have access to the Proxy(Tried a telnet to that hostname/port). I am running ASA 8.3(2), Anyconnect(OS X) 3.1.01065.
View 3 Replies View RelatedI currently have 90 remote locations that have PIX501's. They are all running 6.3 on them. All of these locations are creating an IPSEC VPN to my ASA 5520 (8.4) at the data center. Web access at the remote locations is currently being handled with ACL thru split tunnels. This is getting increasingly not fun as I have to reach out and touch them one at a time whenever I have to allow more access to the net. Code...
I would like to keep my split tunnel (if possible) for ports 443 and 21. I allow access to "any" on those ports and have no plans to change it.
Can I send port 80 down the VPN tunnel to the Proxy/Web Filter and then return the results to the Remote Client.
There is a proxy server at our office, it is preventing me from using yahoo messenger webcam service. I am unable to see others cam as well as broadcasting my cam to others.bypass the proxy server to use the cam.I dont know the password for the proxy server or router?
View 2 Replies View Relatedi just want to ask how can i block all proxy server websites in my router( any brand ) so that no one can access, like facebook i already block it in the router but they still access using proxy server website.
View 2 Replies View RelatedSo I have a proxy server in my home that all the computers use to access the internet (XP Pro). I edited the host file on the proxy to redirect traffic for various reasons (ad blocking, etc.) But I have noticed that it doesn't seem to affect the computers that use the proxy. For example one entry in the host file could be 127.0.0.1 abc123.com so that abc123.com would loopback to the localhost. For some reason this isn't working. Is there anyway to get this to work without changing the host file on each individual computer?
View 3 Replies View RelatedCharter tech came today to solve my problem of my new modem not working, he fixed the Modem but i think he did something to the lan proxy settings after.I'm trying to set up my Belkin wireless G router but i do not have the orginal CD. What should my address be under the "Use a Proxy server for your LAN" checkbox and what is the port and should i check off the bypass proxy server for local address box?
View 4 Replies View RelatedAll the internet access from my company needs to be pass through a proxy server from the Global server which needs a LDAP user name/password in order to access the internet resource. Recently, I purchase 2 set of Windows 8 professional 64B OEM machine, the IE is ok as I embed the proxy IP/LDAP user name/password etc.. I can also install some Windows APP from the store, however, all live feed seems blocked..Tried quite a lot work around but no cure. Could I setup another internal proxy server (linux based) which store my LDAP user name/password in order to access the external resource and all Windows8 machine shall point the proxy to this Linux proxy server so it can use my LDAP user name/password.
View 1 Replies View Related