Cisco Wireless :: Linksys X3000 / WAP200 - Can't Adjust Repeater Mode
Feb 6, 2013Bought wap200. I can't adjust the wireless repeater mode. Linksys x3000 supports wap200? What settings need to be made?
View 1 Replies
ADVERTISEMENT
Linksys Access Point :: X3000 And WAP200 - Can't Adjust Wireless Repeater Mode
Feb 7, 2013Bought wap200. I can't adjust the wireless repeater mode. Linksys x3000 supports wap200? What settings need to be made?
View 4 Replies View RelatedCisco Wireless :: WAP200 Repeater Mode Setup?
Oct 19, 2010I have 3 WAP200 wireless-G access points. I have one set up as an AP the other two are set up as repeaters to the main AP.
My question is Do I need a lan connection to each repeater ?
also, do I need to create SSIDs for all three? & if so, do they need to be the same?
Cisco Wireless :: WAP200 Not Give DHCP In Repeater Mode
Jan 4, 2013i have Accesspoint WAP200 Model.iam trying to make repeater mode from other routers ( not linksys or cisco) but not works for me.when try to connect to the network which repeated with WAP200 its trying to take ip then failed ( its like DHCP not works in repeater mode)
View 2 Replies View RelatedCisco Wireless :: Setup WAP200 As A Repeater?
Oct 31, 2010I have a Cisco WAP200 Wireless-G Access Point - PoE/Rangebooster with the latest firmware 2.0.2.4-ETSI?I’m trying to set it up as a repeater, repeating the wireless signal from a Cisco 877W.I have configured the WAP200 with the same SSID, WPA key, and channel as the 877W.
I have changed the WAP200’s AP Mode setting to Repeater, and picked up the 877W’s MAC Address.The WAP200 is broadcasting and I can connect to the wireless network, but I don’t get DHCP. It’s almost like it’s still in Access Point mode.
Cisco Wireless :: Setting Up WAP200 As Repeater?
Oct 12, 2010I'm trying to setup a WAP200 as a wireless repeater and I am having some problems. The SSID I am trying to bridge is coming from a WRV210.
I on both devices I have the SSID, security, and channel set the same. The WAP200 is set to Repeater mode and I did a site survey to find the WRV210. The WRV210 is set to to allow the WAP200 repeat its signa using auto select, manual with site survey and manual actually entering the MAC address by hand.
Nothing seems to work. I can see the wireless next work but when i connect to the repeater I never get an IP address.
Linksys Cable / DSL :: Connect E1500 In Bridge Mode To X3000?
Apr 5, 2012different ways to connect a printer to the X3000. how to connect a printer to the X3000, i.e. wirelessly, USB port, or directly via one of the LAN ports. I also checked the product information for X3000 on the CISCO website and it only makes reference of the USB port as StorageLink.
. Since then I have reconsidered and now am looking to purchase the E4200V2 to connect in bridge mode to my X3000 instead of the E1500. Correct me if I am wrong but connecting the E4200V2 to my X3000 should be the same connecting the E1500 to my X3000, i.e. bridge mode? Yes or No?And my final set of questions is rregarding what would be the best set-up for adding a storage device and printer to my network once I get the E4200V2 and set it up in bridge mode?
- Should I connect both the printer and storage device to my the E4200V2?
- Should I connect them both to my X3000, which provides my internet connection?
- Should I connect one to the X3000 and one to the E4200, if so which to which for best set-up?
Linksys Wireless Router :: Difference Between E3000 Repeater And Client Bridge Mode
Jul 5, 2011Who knows the best version (DD-WRT or other) to repeat the wireless signal with a E3000?At worst, a client bridge mode could be sufficient for my needs...
View 9 Replies View RelatedLinksys Won't Connect In Repeater Mode?
Jan 13, 2013i have a linksys running dd-wrt and i had for a long time and it always worked but recently it just stopped connecting.i dont know how to fix this it would always say connection limited.
View 2 Replies View RelatedLinksys Wireless Router :: E1200 Settings Allow To Adjust TX
Mar 30, 2013I'm currently looking at buying the E1200. confirm if the settings on this router allow you to adjust the TX (aka transmission strength)?
View 3 Replies View RelatedCisco Wireless :: Does AP1142N Have Any Repeater Mode
Apr 12, 2012We have an 2504 wireless controller at the office with 5 LAP1142's. At another office we have a single AP1142 which doesn’t quite reach end to end. Ideally I want drop in another AP1142 to provide end to end coverage. Does AP1142 has a repeater mode? If not is there any way to make two AP1142's work with each other so they appear as a singular access point? Can they be configured to handle roaming?
View 1 Replies View RelatedCisco Wireless :: 1142 In Repeater Mode?
Jun 2, 2012I am a bit confused of the repeater functionality in the mentione AP, my concerns are:
1- Will each radio be dedicated to one function (for example 2.4 GHz for user access and 5.0 GHz for repeater functionality)?
2- Will the internet speed for users be affected when using the access point in repeater mode (no ethernet)?
3- Can an Autonomous AP function as a repeater?
4- Is there any license required?
5- What is the signal overlap requirements between the two Wired and non Wired AP?
6- Can the non wired AP be work as a repeater for another non wired AP (similar to cascading)?
Linksys Wireless Router :: Adjust Speed Settings Of E4200?
Nov 24, 2012Can I do this with a E4200? I want to do this for gaming reasons, and I mainly want to slow my speed down. I currently have my console hard wired to the router. I have accessed the firmware for the router but don't see how to change speeds.
View 2 Replies View RelatedCisco Wireless :: Sometime WAP4410N Drops In Repeater Or AP Mode
Sep 21, 2010I also have problems with this type of accespoint, i have 2 (one in AP mode and the other in Client/Repeater mode).
Very often the connection between the pc and the repeater, and also between the 2 accespoints just "drops" out (like its resetting itself).
The accespoints are in enough range of eachother, so thats not the problem.
After the contact with Cisco here in Holland they said this type (4410N) is not stable with the 2.0.0.5 firmware, and its also limited to the B and G (not N) wireless, because else the accespoint will be even less stable??.
When can we expect a propper solution to this Cisco problem?
Cisco WAP4410N In Wireless Client / Repeater Mode?
May 26, 20121) Apparently, my Cisco modem likes to assign new IP addresses to things, so I didn't figure out the web access page until an hour in (was NOT 192.168.1.245)
2) Do I input the same IP address, subnet, DNS and default gateway as my Cisco modem? It has a wireless router and switch bundled in, should I use the wireless network's MAC address or the wired?
Currently, it's set to 'automatically configure':
IPv4
Local IP Address: 192.xxx.x.xx
Subnet Mask: 255.xxx.xxx.x
Default Gateway: 192.xxx.x.x
Primary DNS: 64.xx.xxx.xxx
Secondary DNS: 0.0.0.0
I can access the page fine, but I cannot get the wireless client working...
3) I did a site survey and found my existing network and inputted its SSID and MAC address, but nothing happens. I still get one bar on my wireless devices indicating the AP isn't working.
Cisco Wireless :: WAP4410N Bridge / Repeater Mode
Sep 21, 2010I have just been escalated to Level 3 support about my bridging issues.Bridge / Repeater mode configuration separated by 150 feet. Worked perfect for over 3 months.Upgraded firmware due to lockups starting to happen, now cant get the bridge / repeater to work longer than 15 min.After MANY support calls, new devices sent (version 2's) still no luck.
Talked to Marcelo at1 866 606 1866 and he stated that the Bridge / Repeater mode will not be supported farther than 50 Feet.(seems like a cop out to me) He didn't seem to have an answer as to why it worked for 3 Months other than interference Of which I have ran spectrum analyzers and see no Interference. **** even 10 feet away I cant get the units to work longer than 15 min.So I definitely think the 50 foot thing is a BS answer.
Also they have told me that External Antennas are not supported with these devices.Again even though People 500 feet away connect just perfect (without a bridge / repeater mode) with 50% coverage!
so here I am (spent 600 bucks) on bricks.. and nobody will support the device and I cant seem to get my money back.I have 8 customers with these devices, I am not going to use Cisco any longer. However will continue to fight this,as we all seem to have the same BS issues.
Cisco Wireless :: 1242 - Configuration In Repeater Mode
May 1, 2012For the establishment of a WiFi Hot Spot with 5 Cisco 1242AG and 5 antenna AIR-ANT1728, I want to know what the config is the most suitable.
- One antenna in root mode and the other 4 in repeater mode
- Or 5 antennas in root mode
Between each terminal distance is about 100 meters outside?
Cisco Wireless :: WAP4410N Work In Client-Repeater Mode?
Dec 7, 2009I have purchased 4 of these devices about 2 months ago and have experienced all of the issues reported within this thread. The came with the 2.0.0.5 FW rev installed, so unless the 2.0.0.5 on the cisco DL site is different, nothing I can do with that.I've tried making them work as stand alone AP's, Bridge<-> Bridge, etc... all modes seem to lock up eventually needing a reboot to get any functionality back.Ultimately, I need to make them work in AP<->Client-Repeater mode. I've not been successful in making them work in any mode for a prolonged period of time.
having just rfound this thread today, I have not tried hard coding the NIC's to 100/full, but will give it a try. If it works, great, but then that would defeat the purpose of buying an N radio AP. I would like the potential 300Mbps throughput.
Cisco Wireless :: 1262 / Crossing The Radios In Repeater Mode
May 16, 2013I'm trying to configure Cisco 1262 AP's to allow me to use the 2.4 gHz radio for client access and the 5.x radio for the repeater connection back to a root AP connected to a LAN.
I have already configured the AP's to associate with each other via the 5.x radio, and have a client connected to the repeater AP via the 2.4 gHz radio. From my laptop on the LAN, I can connect to the repeater AP, but I cannot ping nor otherwise communicate with the distant client.
When I use the 2.4 gHz radio for repeater mode, clients that connect to the repeater AP can be seen and communicated with.Is there something special that needs to be done to get my desired scenario to work?All radios are members of bridge group 1.
Cisco Wireless :: Putting 1141 AP In Repeater Mode With AP HP Procurve?
Oct 5, 2011I have a problem putting a Cisco 1141 AP in repeater mode with a AP HP Procurve.Root AP is a the Procurve, but when try to put the Cisco AP with same SSID, Authentication, etc, I receive this error:
%DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: NO Aironet Extension IE
I try disable the Aironet Extensions and always get the same error all time. It's possible connect both APs?
Cisco Wireless :: 1242-AG Repeater Mode Fails To Associate To Access Point
Apr 14, 2011I have just installed 3 access points along with 6 repeater access points all running V12.4. They are all AIR-AP1242AG-E-K9 using the 2.4GHz radio.
Prior to installation I bench tested that the repeaters would associate with the access points and if one of the access points was turned off the repeaters would automatically roam to another access point. I did not have all 9 devices powered up at the same time, but did have 2 repeaters and 2 access points powered up to simulate association and roaming.
During installation as access points and repeaters were powered up everything behaved as expected (repeaters were associating to access points etc.) however during installation once everything was installed the 3 access points were all powered down for half an hour or so and once powered back on the repeaters did not automatically re-associate until they were re-booted.
I have now configured the repaters with parent MAC addresses to reflect the above current assocaition pattern but not yet powered off the access points to test if this forces re-association as this is now a live operational site!!
Is it normal to have to re-boot the repeaters if ALL 3 access points are powered down at the same time? i.e. If only one access point is powered down will the repeaters automaically roam to another access point o.k.?
Cisco Wireless :: AP1262N-E-K9 / Antenna Alignment Scan In Repeater Mode Ignores Timeout
Jan 16, 2013we have a couple of AP1262N-E-K9 APs with firmware version 12.4(25d)JA1 operating in autonmous mode. One AP is setup as repeater while all others are in root mode. My goal is to perform the antenna-alignment test through an SSH console on the repeater with a given timeout-value, e.g.:
"dot11 dot11Radio 0 antenna-alignment timeout 4"
However, the behavior of this command is inconsistent as the timeout value is ignored in 20% of the tests. I.e. in 80% of all tests, the scan really runs only 4 s as specified using the "timeout" parameter. In the other 20% of the tests, the "timeout" parameter seems to be ignored: Often the antenna-alignment scan runs for about 140 seconds and in some cases even for 420 seconds. This is problematic as the access point is completely unavailable during the test, i.e. the configuration ssh/web interfaces are not reachable and no clients can associate to the access point. [URL]
TP-Link 150Mbps Wireless :: TL-WR702N - Repeater Mode Signal Fades Out Or Does Not Work At All
Jan 31, 2013Region : UnitedStates
Model : TL-WR702N
Hardware Version : V1
Firmware Version : 4.18.107 Build 121123 Rel.31456n
ISP : COMCAST
This is the 2nd WR702N I have purchased. The first worked as a repeater for a short time and then failed with the fading symptom. I returned it. The second did not work as a repeater even for a short time. The signal is OK for a few seconds and then fades out. I updated the firmware.
How To Adjust Range Of Linksys Router
Jan 3, 2012i want my wifi connection all the way to my room
View 1 Replies View RelatedPut D-Link DIR-615 C1 In Repeater Mode?
Oct 5, 2012I just recently upgraded my home router from a 615 to a 655, so I thought I would use the old router as a repeater bridge at another location.
I read that the DD-WRT firmware offered a repeater bridge function, so I successfully flashed the 615 C1 with the latest release 7/12.
I get all of the configuration steps, and even have set up client bridge mode. My problem is when I bring down the list of available wireless modes, repeater bridge isn't on the list.
Is the C1 version not able to do this? is there something else I need to do to enable a repeater bridge?
Connecting Repeater To Access Point (router In Bridge Mode)
Dec 20, 2012Just bought a new router and repeater for a wifi hotspot i am currently running.. I thought i was havng problems with the repeater after i change from router to a server, (and i'm now using a router in bridge mode) so the server is managing all the dhcp.. etc, Hence, the router is Running as an access point. The server which is a Hotspot Server does the rest. For some reason, repeaters, do connect to the access point apparently, but when connecting the client to the repeater (instead of access point) I can't get internet access. although i do get access to the repeater setup.and access point setup too.. or if that is the fact that repeaters must be connected to a router, not access point? should I use it as a WDS? or AP-wds? I have a Cisco Lynksys e1200 router (which i'm using as access point) and an Encore ENXWI-1AN45 3 in one range extender?
View 2 Replies View RelatedLinksys Access Point :: WAP200 Cannot Hit Web Connectivity
May 31, 2011Any issues with the WAP200 and web connectivity? The internet stays up, but after awhile, any browser I use cannot hit the web. Email, chat, and any other internet reliant apps are fine.Just web.
View 1 Replies View RelatedLinksys Wireless Router :: X3000 Can't Access Certain Websites
Dec 20, 2012I installed a X3000 yesterday. I notice I can't access parts of certain websites - it seems to be just those parts of each site where a logon/password is required.My wireless dongle on the same laptop works OK, so it seems to be a router problem?
View 3 Replies View RelatedLinksys Cable / DSL :: How To Get Superior Wireless Range With X3000
Mar 19, 2012Recently I purchased X3000 model for my large home, but I am unable to get superior wireless range.
View 1 Replies View RelatedLinksys Access Point :: Unable To Configure WAP200
Sep 17, 2008I'm trying to access the WAP200 for the first time. Instructions say Configure your PC to have the static IP address on the same subnet as the Access Point's default address (http://192.168.1.245). So I assumed i would go to TCP/IP properties and type in IP address and subnet mask and the Utility would open.
View 3 Replies View RelatedLinksys Cable / DSL :: X3000 Local Network Connectivity Through Wireless
Sep 19, 2012I cannot connect local IP addresses that are connected to X3000 THROUGH LAN CABLE, but we can connect to the local IP addresses that are connected to X3000 THROUGH WIRELESS.There is definetly something wrong with the software of the X3000 since it is the only DHCP server on my network.I have 3 routers connected to X3000 thru LAN cable, the strange thing is when i connect to one of those 3 routers i can connect all devices in the network whether wired or wireless.when i connect to X3000 thru wireless i cannot access to those LAN devices in the network unless they are directly connected to X3000 thru wireless.and when i connect to x3000 with a LAN cable everything works perfect, i am able to access all devices in my network.
View 7 Replies View RelatedLinksys Wireless Router :: X3000 How To Access The Connected HD From Computer
Jul 18, 2012The HD connected to my X3000 Router is recognized and visible (shared folder) from my media player connected to my TV. However I can't see it from my computer to add/remove files. Isn't it possible to administer the files on the drive without disconnecting it from the router and connecting it to the computer?
View 2 Replies View RelatedConfigure Tplink Modem On Repeater Mode In Order To Repeat Signal From (Huawei)?
Dec 4, 2011That's y topology:
(TPLINK) /////////////// (Huawei)--->(internet)
...................wirless................cable
I want to configure my tplink modem on a repeater mode in order to repeat the signal from (Huawei) ...