Cisco Wireless :: WLC5508 With 6.0 Software - How To Replicate All Configuration

Sep 15, 2012

I have WLC 5508 with 6.0 software  and kept in main office and 10 sites are connected . I created Group and hreap for the sites AP.Now customer wants the secondary WLC to keep on one another site. And the customer is asking all the configuration like ap group and all should come to secondary wlc automatically . In future also if he create any new group in primary it should come in secondary wlc.And if primary goes down the secondary should controll all the sites and when comes up primary should taken care.Active standbye mode.

View 10 Replies


ADVERTISEMENT

Cisco Firewall :: Cat 6500 FWSM System Space Does Not Replicate Part Of Configuration

Jun 11, 2012

I have FWSM failover pair, Active/Active configuration, admin and another 4 context, few context active on first FWSM, other on second FWSM.I needed to add  VLANs 51 and 52 to FWSMI created VLANs on both Cat6500, created firewall vlan-group 3 a and put "firewall module1 vlan-group 3" on both cat6500Then I log in in system space on primary FWSM and created interface VLAN.Created VLANs automatically occured in system space on  Secondary FWSM.Then I wanted allocate VLAN 51 and 52 to context XY, so I went to part of configuration for context XY and "allocate-interface Vlan51" and  "allocate-interface Vlan52".

View 1 Replies View Related

Cisco Wireless :: Configuration For WLC5508 To Be Used For Site

Jun 6, 2012

looking at doing the site survey before detailed implementation. we plan to use a wlc5508, AP3602, a good tripod/stand, PoE switch and AirMagnet to conduct the site survey. i'm inclined to use a single AP and just a guest SSID and let AirMagnet merge the readings on where i 'locate' the AP (on 1 VLAN)

View 1 Replies View Related

Cisco Wireless :: How To Import Configuration From 4404WLC To WLC5508

Feb 3, 2012

In one week I need to import the config from my 4404 WLC to my new 5508, then I just want to change the mgnt IP address of the 5508 and then bring it into the same mobility group.How do I import the config when the 5508 is straight out of the box?

View 13 Replies View Related

Cisco Wireless :: Minimal WLC5508 CLI Configuration To Access GUI?

Sep 8, 2010

I have on my desk a WLC-5508 that I need to setup to ship to a remote location. Normally we configure 4402 model and this model/version appears to be much different. I am trying to configure just enough via the command line to access the GUI via a laptop directly connected to the device. I’ve gone through the Wizard Configuration Tool where you set the hostname, admin account, and management interface (among other things). We use LAG and tagged VLAN on the management interface. I’ve been told in the past this is how we configured the 4402 models via laptop directly connected once the GUI is accessible, but with LAG enabled I don’t understand how a laptop could communicate via trunk, so I've disabled LAG and set the VLAN to untagged. In either case the laptop does not communicate with the WLC. Skipping ahead to my current setup I see the following information via the CLI:

(Cisco Controller) show>interface detailed management
Interface Name................................... managementMAC Address...................................... IP Address....................................... 10.1.1.20IP Netmask.......................................

[Code]....

View 6 Replies View Related

Cisco Wireless :: WLC5508 Required For Outdoor Mesh Configuration?

Jan 3, 2012

I want to start implementing a small outdoor mesh network of 3 APs Aironet 1550 in order to grow afterward with more APs. Is there any way to configure those 3 APs in an outdoor mesh configuration (for example, only one RAP and two MAPs) without a Wireless LAN Controller or I have to have at least, one WLC? My idea is to have a WLC 5508, but at the very beginning I don't know if my budget is gonna allow me to cost the WLC.

View 7 Replies View Related

Cisco Wireless :: WLC5508 - Push Same Configuration On Multiple APs In 1 Shot?

May 1, 2013

is there a way on a WLC5508 to push the same configuration on multiple APs in 1 shot?I need to change the High Availability settings on most of the APs (not all). And the only solution i find is to do 1 by 1...

View 6 Replies View Related

Cisco WAN :: 4948 Trying To Replicate Config For Qnq Layer3 Interface

Apr 9, 2013

I am replacing a 7204 router with a 4948 and am having trouble trying to replicate the config for the qnq Layer3 interface.A bit of background - I am a service provider where  I have an interconnect with the carrier, who pass off WAN links to me as a standard VLAN Ids.  Some of these VLANs however I can do QnQ.
 
This works fine - but I can get the second-dot1q 50 command working properly

View 14 Replies View Related

Cisco Firewall :: ASA 5510 Tunnel - Replicate Data Between Two Locations

Oct 3, 2012

I am not a ASA expert but I have configured them few times. I have a vision of a task I have to complete but not sure if it is practical or how to go about doing it.
 
We two locations, Location A and Location B. Both locations have a 100MB internet conection. Location A has a ASA 5510. Location B has a 5505. Users at both locations access the internet via their respective ASA. Location A is the headquarters and Location B is a disaster recovery site. We want to setup a tunnel between both ASAs. This tunnel will be used to replicate data between the two locations for DR purposes. We need the users to still use the same pipe to get to the internet but want to allocate 10MB for internet use and the remaining 90MB for the DR tunnel.

View 30 Replies View Related

Cisco Wireless :: WLC5508 - Backup WLC Across A WAN?

Jan 29, 2013

Currently we have 20 remote sites, each with 2-5 AP's each. They all connect back to our Main Data Site in the US and register on a single WLC5508.

We do not have a backup WLC, but are looking to purchase one. What I would like to know is, are there any problems with the secondary WLC being installed in our Main Data Site in Europe? These two main sites are connected via a 10M MPLS WAN.
 
So all the remote sites could still connect to the WLC in the US, but in the event of a WLC failure in the US, they would need to fail over to the site in Europe

View 5 Replies View Related

Cisco Wireless :: WLC5508 Client Can't Get Its IP

Feb 6, 2013

I'm using WLC5508 /w 7.0..My client do not get its IP. Status shown "DHCP_REQD".I found in (Cisco Live) Troubleshooting Wireless LANs with Centralized Controllers  This related with Enable/Disable DHCP Proxy checkbox. I solved. with Enabling this.But,
 
1) Why this box have been working correctly for longtime? No one did diable/enable this feature on my box.

2) I guest, ver7.0 Disables this chechbox by default. Or not? I also have others two 7.2 boxes. Those are all Enabled.

View 7 Replies View Related

Cisco Wireless :: WLC5508 - Client Cannot Get IP From Ex DHCP

Feb 4, 2013

I have a WLC5508 , we are using external DHCP for WLANs
 
one WLAN is able to get IP  from DHCP server but another WLAN not , the DHCP server is same , only 2 different scopes.
               
This is debug
 
*DHCP Socket Task: Feb 05 21:26:43.106: e8:06:88:9b:a8:04 DHCP received op BOOTREQUEST (1) (len 308,vlan 1, port 1, encap 0xec03)
*DHCP Socket Task: Feb 05 21:26:43.106: e8:06:88:9b:a8:04 DHCP processing DHCP

[Code].....

View 2 Replies View Related

Cisco Wireless :: VMware Cannot Get DHCP When Using WLC5508 V7.2

May 7, 2012

I have some problem about dhcp via VMware 7.1. My client connect the wifi and get ip address well, then, i turn on VMware (inside my computer) and set as the bridge mode. I found that my VM cannot get the ip-address from dhcp server and I using WLC5508 version 7.2. I try to connect via Switch, my VM get the ip address well.

View 1 Replies View Related

Cisco Wireless :: Mesh And Flexconnect With WLC5508?

Apr 4, 2013

A customer have a bad coverage in a corner of his branch office. He like to add a mesh AP (MAP) in the near of that corner.
 
I checked allready the documention about Mesh but i'm not sure if Flexconnect and Mesh works togheter. This MAP is in a branch office and the WLC is in the head quarter therefore he likes to uses Flexconnect togheter with Mesh.

View 10 Replies View Related

Cisco Wireless :: WLC5508 WLC HA AP SSO And Number Of Interfaces

Feb 25, 2013

I have a customer who is going to deploy a WLC HA AP SSO setup. I have recommended them to have 4 Gigabit SFP modules in each WLC5508.The customer now asks if it is possible to only have one or two SFP modules in the standby unit ?  As he says it is properly not going to go in service one time within the next five years if he is unlucky.

View 5 Replies View Related

Cisco Wireless :: Setup DHCP On WLC5508?

Apr 17, 2013

Is it possible to setup DHCP on the WLC5508? If i have 2 or 3 VLAN with different Scope and IP range, how can i do?

View 1 Replies View Related

Cisco Wireless :: Upgrade WLC5508 To Version 7.4

Feb 6, 2013

We have five cisco WLC 5508 and one WCS .The WLC is running on 7.0.116.0 version at present but we want to upgrade it to 7.4.100.0 but on cisco site at download location , the below thing is mentioned...
 
WLC Version 7.4.100.0 will need Prime Infrastructure Version 1.3 to be  managed, Version 1.3 is not yet available to download at this point of  time
 
Access Point Model----Cisco 3501i Series
 
So i want to know, can i upgrade it to this version when we are having the WCS in our network ?

View 16 Replies View Related

Cisco Wireless :: WLC5508 VoIP Connectivity Is Broken

Jun 22, 2012

I have a  WLC5508 and 25  LAP 1041. I use two wifi, one with RADIUS for data and other with wpa-psk for voip. The problem is the voip conectivity is broken.How can i improve the handover?

View 11 Replies View Related

Cisco Wireless :: Several Remote Sites And Centralized WLC5508

Nov 8, 2011

I have been asked to setup wireless and we have purchased WLC 5508 and 1142 APs.We have several remote sites and a  centralized WLC.  The requirement are to have a common SSID  (Corporate) advertised across all the remote sites and have that SSID locally switched, and have another two SSID Guest and Mobile tunneled back to the central site (WLC).I want all the wireless (Corporate) clients to use the same subnet as the wired clients at each remote site, the IP assigment will be done by a DHCP server at the central site. The Guest and Mobile users will use a common subnet each across all the site and this will also be handled by the DHCP server at the central site.
 
I have enabled H-REAP with Centralized  Authentication and Local switching but I'm not sure about the second  part which is to have a common SSID (Corporate) across the remote sites and localy switched whilst having the other two SSIDs tunneled back to the WLC. Cisco TAC told me to configure dynamic interfaces for each of the remote site but then he said I still wouldn't be able to switch the Corporate traffic localy if I use a different subnet to the wired subnet for the wireless clients.

View 12 Replies View Related

Cisco Wireless :: 1552 Outdoor AP Disappears From WLC5508

Dec 30, 2012

My problem ist that i have 4 air-cap-1552e APs witch are powerde trugh Power Injectors. They worked fine for a few days but then the controller (7.2.111.3) lose connection to them. Right now i have only one Joined AP. The other 3 are status not joined. I can Ping all 4 Aps and wifi clients are connected through them.

View 8 Replies View Related

Cisco Wireless :: WLC5508 Link To Switch Core Down?

May 16, 2012

I tried to implement WLC5508 in my network but when I came to connect it to the switch core which is a Catalyst 4000 the link didn't get up. This switch module is a fastethernet, I wonder if that might be the problem since I also tried connecting my laptop to the WLC and the link got up.
 
If that might be the cause, is it possible to get WLC to 100 Mbps?

View 5 Replies View Related

Cisco Wireless :: WLC5508 - Ipad2 Can't Join Wi-Fi Using Wpa2 AES

Apr 12, 2012

we have a cisco WLC 5508 on which few SSIDs are configured, and two kinds of APs: AIR-LAP1142N-E-K9 and converted AIR-AP1141N-E-K9.
 
When in WLAN settings we leave WPA2 policy and AES encryption, iPads2 can connect without any problems to AIR-LAP1142N-E-K9, but there is no connection to converted AIR-AP1141N-E-K9.  MacBooks, iPhones are connecting without questions.

When we set WPA2+TKIP everything is cool, but other Apple devices can't rich 802.11n speeds((
 
With only WPA2+AES or both WPA2+AES+TKIP enabled on a WLAN the WLC gets such messages :
 
Decrypt errors occurred for client xx:xx:xx:xx:xx:xx using WPA2 key on 802.11b/g interface of AP xx:xx:xx:xx:xx:xx
 
But I know that it can happen when you offer funny encryption combinations that client doesn't like (wpa1+aes, wpa2+tkip). But the advise to try to only enable wpa2/aes for some reason doesn't work.

View 15 Replies View Related

Cisco Wireless :: Configure 802.11n On WLC4404 Or WLC5508 In 2.4Ghz?

Aug 15, 2012

how to set up support 802.11n on WLC4404 or WLC5508 in the 2.4Ghz? WLC4404 supports 802.11n? or support this protocol only in the brochures? I spent a few days, but did not get the result. I'm connected at speeds 65/130Mbit, but the real speed tests never exceeded 45Mbit. The AP from the test laptop is 7-10 meters.I tested the laptops with a Linksys AP E1200-EE ( 40Mhz, FastEthernet uplink port...)and received nearly 100Mbit!
 
At WLC5508 able to connect at speeds 150/300Mbit/c but only in the 5GHz band, but real speed tests never exceeded 70Mbit.In 2.4Ghz range I connected at speeds of 130/144Mbit/c, but actual measurements showed no more than the 45Mbit.
 
All tested with iperf and with site speedtest.net.
iperf -w64K -s
iperf -w64K -i 2 -t 300 -c x.x.x.x
 
Laptops: Asus (Atheros AR9002WB-1NG) and Sony (Advanced-N 6230).
 
My tests AP: 3501I-E and 1252AG-A
SW on WLC5508 7.2.110.0
 
AP tested in different variants - open system and WPA2+AES.

[code]....

View 5 Replies View Related

Cisco Wireless :: WLC5508 Crap Throughput On MESH

Oct 14, 2012

I have two WLC5508 controllers running 7.0.230.0, which having the two of them probably is inconsequential because all the APs are added to only one controller. The problem I'm facing is that I have several LAP1552E's deployed throughout my facility, and I have several that are doing Ethernet bridging to some Cisco switches using G0. In this, I have a PC at the end of one of these switches, and using Iperf and PingPlotter to get some metrics, and what I'm seeing is >400ms latency with <3 Mbit throughput to the PC. On the 802.11a radios I have 18 Mbit set as mandatory, with everything below disabled and everything above Supported, with all MCS indexes under 802.11n enabled.

My channel is set to 161 with a 40 MHz channel-width, and a power of 3 configured.After many days of trying different power settings, channel settings, and such, I can't get better results than above and my channel utilization stays > 75% at all times. I do have video cameras attached to the other bridges switches, and have video QoS set to Bronze and the cameras configured to ~ 1 Mbit bandwidth maximum. Also, average RAP-MAP distance is ~ 1100 ft and average MAP-MAP distance is 400 ft, with the longest RAP-MAP being 1400 ft and MAP-MAP distance being 875 ft.

View 7 Replies View Related

Cisco Wireless :: OfficeExtend AP Not Join Controller WLC5508

Oct 4, 2010

I try to configure an AP1131 as OfficeExtend but unfortunately I receive the following message from the debug command on the WLC5508: (Cisco Controller)

*spamApTask4: Oct 04 17:19:18.043: 00:1b:90:74:37:e0 Discovery Request from XX.XX.XX.XX:14847
*spamApTask4: Oct 04 17:19:18.043: 00:1b:90:74:37:e0 Join Priority Processing status =

[Code].....

View 5 Replies View Related

Cisco Wireless :: Bonjour Not Working - Centralized WLC5508

Mar 24, 2013

I have the attached diagram and I followed the instructions from another posts / forum cases and the Apple TV is still not working.
 
My questions are:
 
1.-The WLC controller and AP must be in the same subnet?. This is not my case, the AP 3500 is operating in a remote location and I have a centralized WLC 5508.
2.- I already configured the Controller --- > General --- > Broadcast forwarding (enable) + AP Multicast Mode (Multicast / IP: 239.20.226.197).
3.-I already configured the Controller --- > Multicast ---- > Enable Global Multicast Mode (selected) + Enable IGMP Snooping (selected) + Enable MLD Snooping (selected). Please see the attachment.
4.-Do I have to configure something in the Mobility Management --- > Multicast Messaging --- > (Enable Multicast Messaging + Local Group Multicast IP Address) ?????
 
The  Apple TV Device and Ipad are authenticated in the ISE using certificates with no issues and both got IP's from the DHCP for the WLAN Vlan assigned to the SSID activated (see pictures attached).

View 11 Replies View Related

Cisco Wireless :: WLC5508 How Does A Typical Client Endpoint Select 802.11n Over 802.11a

May 13, 2012

In an enviroment with WCS and a WLC5508 with 40 AP's (WAPs are either 1262's and 1252's), I have noticed that the bulk of users are infact operating on 802.11g although most operating notebooks are running 802.11n capable NICs (including my own laptops NIC - but yet when I connect I connect at 54Mbps.). Only a small portion of registered clients are using 802.11n. All my WAPs have both radios enabled?My question is how does a client notebook select a "prefered" band of 802.11n. I know in some cases the wireless NICs themselves have an option to select the "Prefered Band", but there are many notebooks out there that dont have this option. What would make a client connect at 802.11n over 802.11g? Who makes that call ?

View 4 Replies View Related

Cisco Wireless :: Etherchannels Flapping / Stacked 3750 To WLC5508?

Feb 18, 2013

We're running two 5508 WLCs running 7.0.235.3 pushing out 7 WLANs.  They are both live.  Each WLC is connected to the same stack of 3750G running 12.2(44)SE6 via Etherchannels.I'm getting tons of MAC flapping errors similar to this:9373213: Feb 19 10:53:54.564 CST: %SW_MATM-4-MACFLAP_NOTIF: Host 843a.4b3c.4cec in vlan 752 is flapping between port Po12 and port Po11Each portchannel consists of ports on each of the two switches in the 3750 stack.  Only VLAN 752 shows the flapping activity. LAG is enabled on the each of the WLCs.  The portchannel and interface configs are identical, minus the channel-group command of course.Maybe completely unrelated....looking at CDP neighbors from the switch is incorrect:

WLC1             Gig 2/0/44        157            H       AIR-CT550 Gig 0/0/1
WLC1             Gig 1/0/21        157            H       AIR-CT550 Gig 0/0/2
WLC1             Gig 1/0/20        157            H       AIR-CT550 Gig 0/0/3

[code].....

View 2 Replies View Related

Cisco Wireless :: WLC5508 - Reconnection And Explain Debug Client

Apr 28, 2012

i have WLC5508 and many 1142 AP . client have authenticated by ACS .but sometimes client's PC has occurred this pheonomenon. and has reconnectioned.

View 11 Replies View Related

Cisco Wireless :: Replace WLC2504 To WLC5508 Without Service Interruptions?

Mar 12, 2013

how can i replace my wlc2504 to a WLC5508 without disconnecting everybody, i have 3 SSID, on different VLAN.. I want the WLC5508 to be the main WLC, so i can remove the 2504 from the network. On the WLC5508, it will be the same configuration of the 2504. Is there a procedure or a wiki on such operation?

View 8 Replies View Related

Cisco Wireless :: AP1142 No Longer Joins Controller - WLC5508

Sep 15, 2011

Two months ago I installed a WLC5508 with sw r7.0.116.0 and we installed 8 AP1142 as a start.

10 days the customer calls and says that the wlc logs error messages that says there is an IP-conflict with the management-interface. The conflict source is its own ip-adress!!! He reboots the WLC but the error message keeps coming. After a short while he notices that there are No APs on the WLC...!!!...
 
After some discussion I suggested that he should disconnect one of the two gig-ports of the WLC (LAG was enabled and in use). He did so and rebooted the WLC for good measure ...  The IP-conflict disappeared but still no APs.....
 
In the DHCP-server (MS Win2003 server), in the AP-scope we also see that the "leased adresses" fills up with "BAD_IP_ADDRESS" (or the sort ...  :-/  )
 
The setup is like this:
 
- WLC5508 running r7.0.116.0
- WLC has LAG activated and is connected to two different Cat3750G that are stacked
- The management if of the WLC is on the same subnet as the AP1142s, no other hosts on this subnet
- WLC management interface on own subnet as the only host (+ def gwy...)
- APs on their own subnet, no other hosts
- When the APs gets a IP-adress it is possible to ping them from the WLC!
- All VLANs/interfaces on the WLC is tagged, ie a "pure" trunk between WLC and 3750-stack
- Option 43 configured on the AP-scope
- All APs is connected via Power-injector (PWR-INJ4)
 
WLC5508 => LAG => 2x Cat3750G => TRUNK => Cat2960 with 1x AP1142 => TRUNK => Cat2960 with 6x AP1142
 
What we have done so far:
- Made sure the port-channel on the 3750-stack was configured: port-channel load-balance src-dest-ip
- Physically disonnected on port of the WLC
- Do "shutdown"on port gig-ports on the 3750-stack and "no shut" on only the one that is still physically connected to WLC
- Do "shutdown" on all AP-ports in the 2960-switches. Clear the lease-pool of the DHCP-server, Deactivate scope, Reactivate Scope and finally "no shut" on all AP-ports
 
Nothing worked, still no APs on the WLC.
 
I the connected my PC to the consloe of an AP that was easily accessible and powercycled it. The output can be seen below, the most peculiar was the line : " *Mar  1 00:15:53.351: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination"
 
1. It worked initially but after the ip-address confilct and reboot of WLC no APs associate to the WLC. Why??
2. The error message on the AP console: "*Mar  1 00:15:53.351: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination" What does this mean?
3. Since the AP gets an IP-address an it is possible to ping WLC -> AP, is there some freakish ogre in the Cat2960 that eats up the CAPWAP-packets??

View 8 Replies View Related

Cisco Wireless :: When AP1121G Joins WLC5508 / RSSI In Whole Coverage Is Almost -35 Dbm

Jul 6, 2011

When a  ap1121G joins WLC4404,it shows a normal heatmap in WCS. But when a ap1121G joins WLC5508,the RSSI in whole coverage is almost -35 dbm.I copy the heatmaps to the attached files.
 
The versions are as below.

WCS 6.0.196
WLC5508 6.0.200.29
WLC4404 5.2.157

View 8 Replies View Related

Cisco Wireless :: WLC5508 - Requires To Setup A Dynamic Interface On A Network?

Aug 10, 2012

Having setup several WLC4402's in the past, I am posed with a new implementation that I have never tried before.  I will be setting up a new 5508 that will ONLY be used for remote access-points in H-REAP mode.  It is going into a data center and there will be no local LWAPP's.Is it still required to setup a dynamic interface on a network that will essentially only have the controller IP?  Or can I serve all the AP's out of the single, untagged management interface (which I believe is also the old ap-manager interface now?)

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved