My compaq presario F750us stopped connecting to the internet both wired and wireless. It no longer recognizes its Artheros Ar 5700 wireless adapter. The ethernet connection is restricted to local access only. The notebook runs Windows Vista Home Premium. I have followed all diagnostic and repair steps as per Vista's instructions. Two other computers remain connected. The router is Linksys Wrt 54 G2 V1.
View 2 RepliesMy sister's Compaq Presario CQ62 Laptop, and from what she told me, she can't access the internet. When she can access, it's only with Internet Explorer.
She couldn't register Microsoft Office, use Avast, use Firefox, use Chrome, install updates, and access the iTunes store to name a few examples.
She was able to run MalwareBytes, but no infections were found.
I don't think it's the router, because my sister is also my roommate and I can access the internet just fine, as well as gaming consoles and iPods. But I don't know, maybe it is the router and I'm just not realizing it.
I'm trying to figure out the problem, but it's just not coming to me. I guess she's had this problem since October 2010. I thought it might be an IP address issue, so I reserved an IP address to her, but it appears that nothing changed.
My son has Compaq Presario C700 (C769US) with an Atheros AR5007 802.11b/g wifi adapter. I can connect his lapatop to our Motorola SBG 6580, but then cannot connect to the internet. I get the error that the DNS lookup failed. I have looked everywhere on the HP site, and have talked to the Motorola people. I can't download an updated driver without the internet (I don't think)
View 19 Replies View RelatedLaptop getting only limited wireless access via Centurytel. I have other wireless devices which are able to connect to my home network with no issues. I have disconnected and connected anew as well as unplugged both the router and the laptop and the connection does not execute to allow full access.
View 1 Replies View RelatedMy Compaq Presario V2000 (HP) using Win-xp3 will only connect to the internet using safe mode. When trying to connect in normal mode a message appears saying I cannot display webpage and what I can try is diagnose connection problems. When I click on diagnose problems it tells me that Windows cannot troubleshoot network connection because an error has occured.
View 3 Replies View RelatedI have just gotten a brand new Windows 7 computer, which worked perfectly the first day. I turn it on a few days later and it won't detect <i>any</i> networks, not even my home network.
View 7 Replies View RelatedI have a compaq Presario CQ 60 windows vista 32 bit. I cannot connect to my centurytel westell 7500. I was able to connect to the westell versalink 327W but when I upgraded to the 7500 I havnt been able to connect wirelessly. I can with the Ethernet but not wirelessly. My wifi network adapter is a atheros AR5007 802.11b/g.
View 3 Replies View RelatedI am using a Compaq Presario Laptop and i recently bought a new new mobile which has Wifi. Now I want to connect it to my pc via wifi. I know nothing about wireless networking or wifi.
View 4 Replies View RelatedSo on my compaq presario cq60-204nr i tried connecting to my router with the correct security code and everything and it just kept saying failed to connect due to time out is there anything? and now it says the wireless security settings on my computer don't match those on my router?
View 1 Replies View Relatedafter purchasing a 11yr.old compaq presario 1200 from the swap shop,I was told by the seller,I would need usb ethernet adapter.I bought the adapter,but still can'get the internet.
View 1 Replies View RelatedI have a Compaq presario CQ61 laptop running windows 7 and since my boyfriend installed a new netgear wireless router I haven't been able connect to the home wireless network. I have no problem connecting to public or private wireless networks at my house or elsewhere. Also, my boyfriend and his roommate have no problem connecting to the network on their laptops. It is a WPA encrypted network. I have also tried shutting off the firewall on my computer without any change. My laptop doesn't even recognize the network - i tried to manually add the network to my computer but it still won't come up on my list of active networks.
View 1 Replies View RelatedI have a compaq preario running on windows 7 ultimate.It has been working well with the internet connection but recently it stopped connecting to the internet.It recognizes other computers in the network but the internet connection is not available.
View 1 Replies View Relatedcomputer is slow will not go online and has no recovery disk. I can not even reset to factory settings. running vista home
View 2 Replies View RelatedI'm pretty computer illiterate. So how do I know if my Compaq Presario 2200 has wifi? I've read several threads but. I don't have the computer in front of me but I believe there is no wifi button. Do I buy a PC card or a wireless networking adapter - USB? Where does the PC card go? Will I also need a driver?
View 3 Replies View RelatedI have a Compac Presario w/Vista and I'm getting a limited connectivity message and can't access the internet. My cable modem is connected straight to the computer by ethernet wire. It happened before and I unistalled the Vista update and it was fine. I can't see what the problem is this time cause my Event log won't come up saying that the Snapin for the MMC isn't properly loading. I am able to see alerts but there wasn't any on that date. My Norton's won't come up either stating that the side by side configuration isn't right.
View 12 Replies View RelatedI purchased a Netgear wireless box for my boyfriend a couple months back and we have just recently set it up. My iPad and laptop connect with no problem at all but his mother's computer, the Compaq, won't connect to the internet unless it's directly connected to the router/modem.
I've gone to the support section of the Netgear website and tried what they told me but I keep running into needing to log on to my router. The default password isn't working and neither is the one we tried to set up (really my bf tried to set one and somehow managed to screw up the whole thing; I just went to bed cause I was happy we even had wireless).
so I went into device manager and deleted the 2 network adapters, rebooted and let Windows reinstall. Windows created a new Local Area Connection (LAC4, 2 and 3 are gone). It reads limited or no connectivity and is using Linksys LNE 100TX Fast Ethernet Adapter, just like the previous LAC2. The previous LAC3, which used the WAN Network Driver never got reinstalled. I don't get it.Since a Linksys adapter on a wired connection seemed bizarre I tried to find what the correct network driver should beI Googled "Compaq Presario 5400US" "ethernet driver" OR "network driver" and was taken to an HP drivers page, which This page has nothing listed for chipset or network adapters
View 7 Replies View Relatedcan't find driver for wireless on my compaq f500?
View 4 Replies View RelatedOld Compaq Presario 3000+ getting sluggish, freezing has Compac mouse and keyboard. So brother gave me not as old eMachine. Thought I'd use KVM and play music, etc from old Compaq. KVM hooked up. Compaq keyboard works very poorly with eMachine. Compaq mouse doesn't work at all with eMachine -freezes center of screen. Switch to wireless mouse, works fine with eMachine, but then have ot use Compaq mouse if I switch to Compaq PCU. Is there a universal keyboard and mouse that would fix this?
View 2 Replies View RelatedI have no ethernet port on the presario 7360 - will a wireless usb work for internet connection for this old of a computer?
View 2 Replies View RelatedI have a Compaq Presario V2000 running Windows XP and whenever i close the lid of the laptop the wireless disconnects.
I have all of my power settings set to NOTHING. I have set the adapter, Minimum Power Consumption disabled, same with the Power Save Mode.
I have an issue with my girlfriend's Compaq Presario A900. We have recently had a new Wireless router and the laptop was working fine going online then one day it wouldn't connect.The laptop is connecting to the router although it is showing as an unidentified network and access as local only. All other PC's and laptops in the house are connecting fine and using the internet.I have see this question asked on other forums but as i mentioned i'm not very tech savvy and i can't seem to get anything to work.
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Usersgemma>IPCONFIG/ALL
Windows IP Configuration
Host Name . . . . . . . . . . . . : gemma-PC
Primary Dns Suffix . . . . . . . :
[code]...
i have a compaq laptop the mordal is Presario CQ57, i need driver's for it
View 2 Replies View RelatedMy wireless on my computer won't hold a connection for any longer than 30 minutes. I've checked the drivers, the wireless router, and scanned for viruses (several times) but nothing seems to work. In the last three months, I think I only had one occasion where the connection remained stable for longer than an hour. It doesn't matter what router I use or where I am. It has to be my computer.
I have a Compaq Presario CQ57 and I have had it for about 6 months.
I have a compaq presario V6500 laptop running windows vista SP2. For the past few days i am not able to connect to the internet using ethernet port. But my wireless still works.On checking device manager, my network adapter, a nVidia nForce networking controller#2, gives the following error.
View 14 Replies View RelatedI have a Compaq presario CQ62 Laptop. The other day, my friend accidentally spilled water on my laptop keys. The computer works perfectly fine except for the keyboard. I tried replacing the keyboard but it did not work. Anyways, For some strange reason my wireless capability was turned off and now I have no way of turning it back on. I have searched many forums but have not found an answer.
Q: Is there any way to turn on the wireless capability i.e. using the function keys to turn on the wireless radio, WITHOUT actually using the function keys? i.e. using a command or something within the computer?
My Compaq tc1100 tablet worked perfectly, wirelessly, with our Billion BiPAC 7300NX/N ADSL2+ router, but then it just stopped doing this for no reason that I can think of. In our house is a desktop in each of the 3 bedrooms (one being mine, together with the tablet) that connect perfectly wirelessly to this same router. When I refresh the network list, then one moment it will show my network, and then seconds later when I refresh again, it will give "no networks were found in range".Switching off the router's WLAN security made no difference. Formatting and reloading XP, and installing the tablet's Wireless LAN drivers, made no difference. Moving the tablet around the house made no difference. Now, today I took my tablet with me to spend the day with my wife at her workplace, where there is a Billion wireless router as well (other model). I did not bother to first try to connect with my tablet's wireless card, but instead lent a spare D-Link DWA-125 wireless USB adapter, and connected perfectly. Later in the afternoon, out of curiosity, I started up Xirrus Wi-Fi Inspector, and took a snapshot of it, which is attached here. The whole time I was connected like this, there were, in the bottom right-hand corner, two of those wireless network connection icons, one with a red cross through it.
when removing the D-Link USB adapter --- it was time to come home --- the icon with the red cross disappeared once it was pulled out; I opened IE to see what's happening, and my home page opened successfully. So, was I surfing quite fine with my tablet's own card all day?! I then shut down, switched back on (still with the D-Link removed), opened IE, and my home page appeared again successfully. I did not do any other surfing, I must admit, but just shut down again and came home, where I'm back to square-one with a continual "red-crossed icon".........Using Xirrus here on the home network, and with its "locate adapter" pinger noise thingy enabled, it will alternate between pinging for a while and then keeping quiet --- I can supply the Xirrus 500 sec history snapshot of this, if needed.Yesterday, doing a hard reset of the router *momentarily* gave me "aquiring network address", and then connection, but this soon went away again.The tablet did not have this problem with our previous Netgear router. Nothing's changed in the house: the router and my tablet have always stood where they are. There's no new cordless phones, neither. The one that we have, has always stood centimeters away from the router.
Tablet's ipconfig /all:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsAdministrator>IPCONFIG /ALL
[code]....
I have a Compaq CQ60. It formerly belonged to a friend (who had no problems with it) and I restored factory settings. However it isn't connecting to my router! Well, it does connect - but it calls it "unidentified" and despite my many attempts it just won't allow me access to the internet. The two other laptops in the house are connected to it fine though. I tried connecting to my neighbour's wireless router, and it worked no problem, including the internet! I bought an ethernet cable earlier, which successfully connected my laptop to the internet. (Although it said I was connected to a homenetwork as well as my Talk Talk router, which it proceeds to call "unidentified" and is restricted to local access). However, I really need it to work wirelessly. I have not been able to use the laptop yet as the ethernet cable does not allow me to leave the router!
View 9 Replies View Relatedok so my moms computer (compaq fs7600) had vista an it went nuts so i wiped it an installed xp pro. Everything went fine but now it wont connect to the internet =/. I have a Belkin Wireless router and an Arris high speed modem from Brighthouse. When i checked the cmd prompt it said that the media is disconnected an network connections said that it was unplugged, but everything is plugged in
View 3 Replies View RelatedThe other day, I shut down my laptop and when I turned it back on, it would not connect to the internet. It continuously says limited connectivity and unidentified network. my info is listed below
Location: Birmingham, Alabama, United States
ISP: AT&T they also provided the router/modem which is all connected in one.
Router Model: 2wire Gateway 3800 HGV-B
Connection Type: Wired and Wireless
Wireless Encryption: TKIP
Network Card: Dell Wireless 1510 Wireless-N WLAN Mini-Card
Computer Model: Dell Studio 1535
OS: Windows Vista Home Premium SP2
IP configuration brought up this info. Also tried pinging Google.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Stephanie-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No[code]......
i can no longer connect to the internet and i have tried everything i could think of. my "wireless network connection status says 0 packets sent and 0 recieved,but im connected to my router with excellent signal. when i got this laptop it had alot of malware, i removed 283entries with malwarebytes in safemode. after i did that i couldnt connect to the internet.
View 1 Replies View RelatedI have been using the same Toshiba A105 for the past three years at work. Recently I had to reinstall XP and since then have not been able to connect to my works wireless/wired internet most of the time. I have no trouble connecting to my wireless at home or basically anywhere else except work. Once in a rare while it will connect to work but if it's wireless it's low connectivity and if it's wired it's prone to just drop out again randomly. Everyone else at work is able to connect wirelessly/wired without issue. I've tried static IP and changing my MAC addressThere are some unsecured wireless networks in range that I can connect to but don't want to for work transactions.
View 3 Replies View RelatedI upgraded the firmware on my BEFS41 v4.3 to the Ver.2.00.4 Build 8, off the cisco website. After I received the successfully upgraded message, I could no longer connect to the internet, nor could I connect to the router's configuration page. I tried to do a few hard resets and connecting it to other computers to see any other computers could connect to it, no luck. I tried connecting one computer just to the router, without the internet plugged in, and tried to ping 192.168.1.1 but I received a "transmit failed, error code 1231." Is there anyway I can access this and change the firmware, or am I screwed?
View 3 Replies View Related