Connect To IP Webcam Through A Second Router?
Apr 3, 2011
I have a DSL router connected to a D-Link router. I have an IP Webcam connected to the D-Link router at address 192.168.0.xxx. The D-Link router is connected to the DSL router via 192.168.1.xxx. I need to connect from a computer on the DSL router to the webcam on the D-Link router. I have tried port forwarding on the D-Link to the fixed IP address on of the webcam and accessing via 192.168.1.xxx ort without any luck. I have shut down the firewall on the D-Link.
Both the webcam and the D-Link have fixed IP addresses. I can access the webcam when I am connected to the D-Link router and I can connect to the D-Link router when I when I am connected to the DSL router. But I cannot connect to the webcam on the D-Link router from the DSL router.
View 7 Replies
ADVERTISEMENT
Feb 27, 2013
I have been trying to connect my webcam inside and outside my network. I had it working until I set up my buffalo router. I see my wireless webcam (1st floor) from my pc (2nd floor). I cannot connect through the internet outside of my network.
I have dyndns service which worked on my android and from pc at work. Now with the Buffalo router I cannot. It appears that DDNS is configured correctly on the Foscam and I have wireless configured on the router - it pics up the MAC address but only displays an * in SSID field that should be "Nursery".
If port forwarding is required, I have it set up, but not sure that is correct. I believe my Buffalo router is the N300 DD-WRT
View 3 Replies
View Related
Oct 21, 2012
I've spent months looking for an HD camcorder that could be used as a webcam. Sony has confirmed that none of their camcorders function as webcams and I haven't had much luck with JVC addixxion which turned out to be rubbish. I'm using Windows 7 ultimate.
View 5 Replies
View Related
Apr 19, 2013
I have a IP Camera client app on my Nook Color (modified android based. Has select android apps available)) and would like to stream my laptop's webcam to it. The user agent's available in the settings of the client are:
Internet Explorer 6
Internet Explorer 7
Netscape 3.x
Nexus One 2.2.1 US
Galaxy Tab 2.2 France
IP Cam Viewer 3
Here is the app on Google Play [URL]
How would I setup VLC to stream my webcam as a ip camera so I can view it with my app?
View 19 Replies
View Related
Jun 6, 2011
have hp omni 100 with winows 7 home premium and built in webcam,wanted to be able to either turn it on when i leave home or better yet turn it on from work and be able to monitor my residence dont have alot of money to spend on it
View 1 Replies
View Related
Jun 23, 2011
ho can i give a ip address to webcam
View 1 Replies
View Related
May 2, 2011
I have a H.264 web cam with a built in server attached to a 1 watt Powerlink(N) router(bridge) connecting wirelessly outside (100 feet)to my Dlink 655. My computer connects wirelessly(60 feet) through the house via a 1 watt Powerlink USB adapter to the 655 also. It was the Network from hell to get up and going, but it is functional? now.I have the Dlink with a web server port open outputting the video. I can access internal and externally via IE with a Dyndns domain so its all working.Dlink says I'm getting 80-160mbps from the web cam and 25-55mbps from my computer.The Problem: Camera server comes up fine and starts to stream great video for 2-5 seconds then its like the bandwidth gets used up and it gets choppy, stalls for long periods ETC ETC. I have Nat TCP and UDP set to End point independent if that makes a difference.
View 10 Replies
View Related
Aug 31, 2011
I am using the android phone with software IP WEBCAM and it works fine to view video withiin the same wireless network for android phones and computers.I have to just type[URL] I want to use it to in my home ( Wireless Connection 1 )on my laptop to see the video of my office( Wireless Connection 2 ) using android phone, but the problem here is it says port forwarding should be enabled to wireless d-link 600 router and then the http:<ip address>:<port> should be accessed?
View 1 Replies
View Related
Jul 10, 2012
I want to install web cam for my dell inspiron n5050
View 1 Replies
View Related
Oct 7, 2011
How can I configure DCS 910 webcam if I don't have the software CD?
View 4 Replies
View Related
Apr 5, 2012
I urgently need to create a DCS-930L java script for a my website so that the streaming images (different from the visible images on the "my dlink service") can be viewed by visitors even if my PC is off and only router work.In the Modem/router Linksys WAG 320N I opened port 80 (port forwarding) but I can not see them on the web.
View 1 Replies
View Related
May 6, 2012
how to install the bluetooth and wifi so I can be reused.
View 1 Replies
View Related
Dec 29, 2012
i have issue with my webcam and bluetooth i have installed a fresh copy of windows 7 on it after that i have installed all driver from cd in right order which came with laptop. i have installed dell webcam central it shows no supported webcam found. installing fresh copy of windows 7 installs webcam drivers itself.
and problem with bluetooth is when i active wireless from wireless switch a window pops up showing usb not recognized i think that is only the problem but why i have installed chipset drivers also.
View 6 Replies
View Related
Dec 2, 2012
I have a DCS-930L wireless webcam. I can view the images on mydlink. Is it possible that mydlink take pictures with my webcam and then every 10 minutes sent to my domain[url].....? Who has experience with this link between mydlink and Internet?
View 11 Replies
View Related
Sep 15, 2012
I have dell inspiron N4010, the computer cannot recognize the inbuilt webcam.
View 1 Replies
View Related
Apr 9, 2011
I have an Dell inspiron 1564 with dell webcam central I been useing it a while now and had no problems with it untill one day I logged on and I go on webcam chat sites and as you know theres a button you click for your cam to turn on and useally a warning sign would appear saying would you like to allow this site to acces your webcam and I would click allow but now nothing appears and i click the cam sign and nothing happens just black I set the settings to Allow and always remember but nothing will work I was told to get rid of all my toolbars as they might of caughts the problem so I did and now i don't have any toolbars but it's still in not working I think its the McAfee secuirty I have a on my computer that is not allowing it but then i think why would it one day just stop it from allowing.
View 4 Replies
View Related
Jul 29, 2012
Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.
View 8 Replies
View Related
Feb 24, 2013
I have a wireless Linksys E1500 router, and for quite a few months now, my router just stopped working properly. It quit, I unplugged everything and plugged it back in, and it worked, but from that point on, it's been displaying this:
I've tried changing the Ethernet cables
View 1 Replies
View Related
Feb 25, 2011
I just bought the e1000 router today and I'm already having trouble. I got it setup the first time and all my computers set up with it and it works fine for internet. Everything is snappy and responsive and I don't have any of the problems I did with my old belkin. However, I am unable to connect to the router using cisco connect or the web interface. I need to forward ports, configure wireless security, etc etc. All I did was disable the guest account through cisco connect, and then when the software just sat there doing nothing with the spinning circle in the middle, I opened task manager and killed the process to get it to go away. Now I can't connect using either cisco connect or the web interface.
View 7 Replies
View Related
Aug 13, 2012
Any way to connect a wifi usb to a wireless router for better wifi connect?? i have wifi but it only gets in the room of the house im in and want it to work though out the house not just one room
View 1 Replies
View Related
Mar 30, 2013
At first I can connect to Internet for 1 min and fails afterwards even if I reconnect to the router. Then I turn on the Access Control settings on my (NETGEAR) router and put my laptop into the trusted wireless stations list, now it can connect to Internet for 1 min and fails however it works for another 1 min if i reconnect to the router. So now I need to reconnect to the router every minute or so.I can connect to the Internet via Ethernet cables, so I am quite sure it's the wireless problem on my router but not the service provider's fault.
View 1 Replies
View Related
Jan 17, 2012
I have a WRT54GS which works fine with Linux both from both wired and wireless computers using Linux. But I reinstalled Win XP and now I can't reestablish a connection following the EasyLink advisor. I did have a connection under Win XP before.
The last instruction on the Easylink advisor tells me to look for something marked "local" I don't find that word on the screen.
View 2 Replies
View Related
Dec 25, 2012
When I try to go to192.168.1.1 it says connection interrupted. If i use the Cisco Connect it tells me i am not connected to the internet. My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly. I can go online, I just cant get to the router.
View 9 Replies
View Related
May 9, 2011
How to connect two PCs and one DSL router to get on the internet?I am getting IP conflict error on the PC. I can only connect one PC at a time to get to internet.
View 1 Replies
View Related
Nov 19, 2012
If I update my firmware on my EA2700 router to be able to use the Cloud, will I loose the ability to connect to my router on 192.168.1.1 ? If this is so, why couldn't linksys let you use both Cloud and 192.168.1.1 in their latest firmware?
View 3 Replies
View Related
Mar 9, 2012
I want to use cisco connect with the Router E1200. There is a wireless connection between laptop and E1200 Router. When I run the "Cisco Connect" after couple minutes searching It can not find the Router and I have to put an (Router name SSID) and password.
View 9 Replies
View Related
Feb 3, 2013
I have a weird problem. I bought recently a new router, and when I try to connect to the settings on it on http://198.168.0.1 it sometimes works, mostly doesn't. When I ping other devices which are connected it, it's the same; sometimes get a response, mostly I don't. The router model is: TP-LINK 150Mbps Wireless N Router TL-WR740N, The thing which it's connected to is entitled "ADSL2+ Ethernet bridge router" That aforementioned thing is suppoused to be a modem. But, when I try to connect to its settings from http://10.0.0.138 , I'm able to, and other who are connected to the network give response to a ping.
View 4 Replies
View Related
Sep 28, 2012
One day I got a blue screen saying there was a hardware or driver failure with the network adapter on the motherboard. I couldn't resolve the problem so I went out and got a new network adaptor. Pluged it in, windows found drivers for it. But I was getting a Unidentified network problem.I have a Linksys E1000 router, internet works on my laptop and xbox360 fine wired and wireless. So I changed ports on the router, changed cables, even changed routers. Still the PC wasn't seeing the router. So I download the latest drivers for the Realtek network adapter, install them, still nothing. So I thought maybe the router is to blame, downloaded the latest firmware and flashed it onto the router, reset it. Still the same. At this point I was sure the new network card was faulty. So I took the computer to the shop where i bought the card. He disabled the old network adapter in the bios. And he had the Internet up and running in the shop. I was happy and took it home... Still the same problem! Rang ISP done a lot of disabling, enabling, static IP no fix... except he told me to bypass the router and try plugging the PC directly to the modem, and that connects fine. I can get internet from the modem, but not through the router, yet everything else works fine though the router. As I said cables and ports in the router have all been changed and checked. When I do the network diagnostics in windows 7 is says, does not have a valid IP configuration.
View 19 Replies
View Related
Mar 20, 2013
I bought a Cisco-Linksys E3200 8 months ago and it worked well until last month. I usually power down the router after midnight & power up in the morning and evevry time it can connect to internet through DSL modem without problem until this Feb. Most of the time after powering up the router it just can't connect to internet anymore. I am sure the AT&T DSL modem is working. I have to reboot/reset the router & DSL modem several time to get router to connect to internet again. The order of resetting/rebooting DSL modem & E3200 router seems to make no difference. It just appears suddenly the router can connect to internet by chance. I changed router IP and it didn't work either. It's really annoying becuase I have to spend 10~40 minutes to resetting/rebooting DSL modem & router to get internet connection every day.
View 9 Replies
View Related
Feb 15, 2013
I have a BEFSR41 v2.1 wired router which was put aside when replaced with a wireless router. Today I wanted to hook it up and use it again, however my computer was not automatically assigned a connection, and I didn't remember how I last had it set up, so I simply reset the router and tried again.
Since the reset, I have not been able to get a connection to the router from any computer using any port or any cable. The LED lights for ports 1-4 do not light up, and setting a static IP address still does not permit me to connect or even ping the router.
The LEDs light up as normal and go through the patterns during the boot-up process. Once that is finished, all LEDs are off apart from the power light (which is steady). If I plug in the modem to the WAN port, the links light is solid and the Act LED blinks. A loopback connection between ports cause the LEDs to light up fine (tried all port combinations).
If I unplug the power, hold the reset button 15 seconds, then power it back on, plug a connection in from my secondary router to the WAN port, the router shows up in the Active Clients list, but I cannot connect to the IP listed, even if manually associating the IP with the MAC address listed..
Because of all this, I can't re-flash the firmware even using the tftp method, since it fails to connect to the IP address in the first place.
What I have tried so far:
- 30/30/30 reset (multiple times)
- manually setting static IP 192.168.1.100 with gateway 192.168.1.1
- manually associating the ip 192.168.1.1 with the mac address of the router with netsh
View 4 Replies
View Related
Jul 5, 2011
My wrt120n router wont connect my ps3, it was working fine, now it dosnt send out a signal, but my computer is wired and works fine. I tried reseting it and leaveing it and the modem unplugged for awhile but didnt work.
View 1 Replies
View Related
Oct 15, 2011
I'm getting decent signal through my 3 story home with my new router, however, there are some dead spots on the 3rd floor.
This is my setup:
1. WNDR-3700 Router on main floor
- TV is hooked up router (internet tv)
- VOIP modem hooked up to router
- USB drive hooked up to router for transferring files from computers upstairs to router USB driver
So basically, the router MUST stay where it is. I'm wondering if it's possible to WIRELESS-LY connect my WNDR-3700 router to another BELKIN wireless router. possible at all?
View 4 Replies
View Related
Nov 23, 2011
I have a "normal" router powering my home wireless network and everything is just fine. However, there are some devices that I want to run exclusively over a VPN, but they do not support VPN applications. I understand that there are some VPN routers available that have the VPN support built-in at the firmware level (Buffalo AirStation WZR-HP-AG300H). This is exactly what I need, but I don't want to run my entire home network through the VPN, only certain devices. So, can I do something as simple as connect my VPN router directly to the "normal" router and effectively run two different wireless networks in the house?Would daisy chaining the routers in this way interfere with the VPN tunneling ability?
View 5 Replies
View Related
