D-Link DCS Network Camera :: 5220 - Turn Off LED Indicator Completely Ignored

Jan 15, 2009

We have a new DCS-5220 that we're playing with, seeing what we can do with it, and have a number of questions as well as one possible bug to report.  I was somewhat surprised when tier 3 support said this was the best place to cover them all - including the bug.We are using firmware version 1.02, which is what the camera came with.

In the webgui, under Configuration > Tools > System > "Turn off the LED indicator"  this is completely ignored by the camera.  The red power LED is always on, and the green status LED flashes as long as it has a network connection.  This is clearly a bug.What is the root password?Is there a URL we can pole for a static image?  (ie.url...  which would trigger a snapshot every time the URL is requested)Are there any shell commands for motor control?  If so, what are they?Is there a shell command to retrieve logged in users?  If so, what is it?Is there a shell command for controlling the LED activity? It would be really nice if the status LED lit green when there was someone logged on to the webgui.  Perhaps this is the intended activity, and it not doing so should be filed away as part of the above bug..

View 14 Replies


ADVERTISEMENT

D-Link DCS Network Camera :: 5220 - Where To Find Plugins

Nov 8, 2011

I have a DCS-5220 cam and when I connect to the camera throught internet from a computer in a different city, I have a problem with the plug-in : quicktime plugin is used and impossible to find the plug-in of D'Link.so impossible to zoom or the change the motion detection parameters,.

View 4 Replies View Related

D-Link DCS Network Camera :: 950G And 5220 - Way Of Recording On NAS?

Jul 30, 2010

I need configuration of IPCAM dcs950g and dcs5220 for recording on a NAS which is DNS-313.My DNS-313 is connected in a network which can be access both locally and remotely, same as my both model of IPCAM.  How should i type in the path textbox input?

View 1 Replies View Related

D-Link DCS Network Camera :: DCS-5220 - Get Data From Database Failed

Dec 6, 2011

When i tried to play back my video this error message appear:

Get data from database failed.i have a few date in my database. I can only playback the video for half of them which is the older one.How to repair them?

View 1 Replies View Related

Network :: Internet Doesn't Completely Turn Off?

Aug 8, 2011

I'm on a home computer and we use a router to deliver internet connection to the multiple computers in our house.However, lately I have been noticing that occasionally one of the computer's, on the network, internet connection drops but yet all the other computers are still working fine with their internet connection. And the internet doesn't completely turn off, like there is no "X" on the two computer screens down below...it just loses its little globe icon...In order to get back the internet, you would have to basically disconnect from the internet connection network and then go back into it and it's back again.

I was wondering, because I'm starting to get suspicious, is it possible that somebody on the network in my house the deliberately found a way to turn of the internet access for one of the computers? I was alerted by checking different websites that it is possible that somebody on your own home network can "hack" into another computer, view its internet history, and even disable internet. How do I know this is happening for sure and take steps to stop it. I want to catch who is doing this because nobody is telling the truth .

View 5 Replies View Related

Cisco Routers :: Completely Turn Off Wireless Network Of RV220W?

Aug 24, 2011

I am using the RV220W with the latest firmware, I disabled all the four APs and also disabled the Radio, but the "Wireless" green light on the front panel still ON, why? How can I completely turn off the wireless?
 
Quoted from manual: WIRELESS—The Wireless light is green when the wireless module is enabled. The light is off when the wireless module is disabled.
  
Moreover I tried to disable the "Radio" while enabled one AP, I found that I can still connect to that AP, so what is the Radio's Enable/Disable used for?

View 16 Replies View Related

D-Link DCS-930L :: Turn Off Camera?

Jan 22, 2012

I have the DCS-930L set up at home with motion detection emails.  I only want it to be sending emails when I am not home, of course, but there's no way to turn off the camera through my dlink.com as far as I can tell (only an option to remove the camera, which I assume is something more drastic). Is my only choice to unplug the camera when I don't want it emailing?

View 6 Replies View Related

D-Link DCS Network Camera :: 910 - Way To Access A Camera Without Using Dyndns?

May 11, 2012

I asked a question recently about accessing camera via a smartphone but I realize that's not really the correct question.  The smartphone works fine locally with wifi and has a browser available.

The real question I have is what is the easiest way to access any camera via a browser from a remote location.  Years ago tech friend assisted me access my DCS-910 using dyndns.org.  It was free and worked great.  I guess it went away when they started charging for a basic account.

Is there an easy way to access a camera without using dyndns even if it involves putting in an IP address instead of a convenient domain name?  I would just like to see at least one of my cameras in a browser off-site.  If I have to pay $20/year for dyndns I can but I would prefer not to if possible.

View 2 Replies View Related

Wireless Network Indicator Showing No Connection?

Jan 31, 2012

My wireless netwok indicator on the bottom of my screen show no connection. It says I need the WEP key.

View 1 Replies View Related

D-link Dcs Network Camera :: Netgear Cgd24n - 942l Just Won't Connect To Wifi Network

Sep 2, 2012

I seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.

So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?

View 1 Replies View Related

D-Link DCS Network Camera :: 2121 - When Plugged In Without Network Cable / Status Led Remains Red

Mar 26, 2011

I connected my camera to my router with a network cable. It is a DCS-2121, H/W Ver A2, with firmware 1.04_FR.It received an IP address and I could access it fine with a web browser.Then I configured it to work wireless.I disconnected the cable but the camera wasn't accessible.Since I couldn't find it I re-attached it with a network cable, but this didn't work.So I pressed the Reset button to start over again.However, now I cannot get it to work anymore. When I plug in the camera and have it connected with a network cable to the router the status light remains RED.When I plug it in without a network cable the status led remains RED.When I connect it with a network cable to a computer directly, the status led remains RED.I've tried changing the network settings of my router to use 192.168.0.x as range, but it makes no difference. In all cases the status indicator remains RED.

View 2 Replies View Related

D-Link DCS-942L :: How To View Camera For Outside Network

Jan 4, 2012

I have a new apple airport extreme wireless router and have done all the port forwarding and gave the camera a static address and cannot view my camera outside my network. I also have done the dyndns service also. I will note if I change the http port in the camera settings to say 82 I get a black screen and cannot view my camera till I switch back to port 80. Reason why I want to do this is I need to view my camera for more then 60 seconds.

View 5 Replies View Related

D-Link DCS Network Camera :: What Stands For RED And GREEN In DCS-920

Mar 14, 2011

I have a Cam setup at my office, how can i know if some one watching me , the colors showing RED and GREEN. what does these colors stands for..

View 3 Replies View Related

D-Link DCS Network Camera :: 930 Won't Connect Over 3G Anymore

Apr 15, 2013

My Dlink DCS-930 camera won't work over 3G. It works fine on my home WiFi network. When on 3G it shows the camera, click it, tries to connect but just keep saying connection timeout.

It used to work over 3G fine, nothing has changed to my network. I've rebooted the camera and router numerous times, it has the latest firmware, but still won't work. I'm logged into my dlink account fine. I have an Apple Time Capsule.

View 2 Replies View Related

D-Link DCS Network Camera :: 920 Can't View From Outside Firewall

Apr 19, 2012

I have a camera set up in my kitchen and it works and I can view it in our house, on other computers or my iphone.  But I can't view it from my work or anywhere outside our wireless range.It is a DCS-920.  I have opened port 80, and checked it with a port checker and it says its open.  I have bell as a provider with a 2 wire 2701hg-g modem.I read on here about someone else not having a gateway address or primary DNS.  I don't know what to put in there.  My camera address is 192.168.2.20.

View 4 Replies View Related

D-Link DCS Network Camera :: 920 Unable To Stream Video

Jun 17, 2010

I recently bought 3 DCS-920 to monitor my home while at the office. However I can't seem to get the damned things to stream video using the dyndns service. I linked my router to the dyndns account and host service. I portforward the ports my cameras are assigned. Up to this point its all good, I can access the cameras and their settings pages while outside. However both the Java and ActiveX options for video streaming do not work. Even within the network, using their raw IPs to view the cameras the videos stream works.But putting in the hostname and port they are assigned brings up the camera page, but no video.I can only assume the ports the video and audio run on are seperate, as when I put one camera's IP in the DMZ host on my router, it works with the DNS. Unforunately I can only do that with 1, and I'd rather not do that at all.

View 6 Replies View Related

D-Link DCS Network Camera :: Mobile URL Hack DCS-2121?

Jun 21, 2011

I just installed my new DCS-2121 and enabled upnp to be able to watch the feed from my mobile.While being on vacation I noticed that the feed redirected to some strange Russian site,[URL]Back home now, I noticed that the /m/m/index.html file contains an iframe at the bottom, that redirects there. So someone (not me) has been able to alter the index on the wap site and add that at the end some way or the other.While Googling I found only one reference on a French forum, and other than the lack of newer firmware for the camera no direct reactions to this.I tried with a simple PUT to put the original file back, without the iframe at the bottom, but there I get a 403.

- When can we expect new firmware to fix this HUGE security problem?

- How to restore the original (and yes, I tried a factory reset, but that doesn't restore the html files it seems)

- How did they manage?

It seems from the config db that it's an OEM'ed alphanetworks.com camera with a lot more options that d-link put in there. Any input from them maybe, it seems they are writing the firmware?

View 6 Replies View Related

D-Link DCS Network Camera :: 2121 - How To Access Direct URL

Dec 9, 2010

I've just got my DCS-2121 up and working. But i can't figureout how to access the direct URL for the camera?And is there a URL for still images aswell?I got an iPad and an iPhone, but i can't access the camera because it use Java.I had another DCS-900 where i could access IMAGE.jpg and Video.cgi. Is there anything like those for the DCS-2121?

View 7 Replies View Related

D-Link DCS Network Camera :: 2130 FTP Uploads With Different Filename

Nov 7, 2011

I have configured my new DCS-2130 with periodic transfer of snapshots to my web page. filename prefix which is given as input in the MEDIA TYPE setup however gets extended with additional numbers resulting in unique filenames after every transfer. E.g. SNAPSHOT1320703730_3939.jpg where filename prefix is SNAPSHOT. This makes it challenging when an URL contains a reference to the same file name, and the file names changes over time. Which calls for name manipulating through script or similar.

View 5 Replies View Related

D-Link DCS Network Camera :: How To Setup 920 To View From Internet

Mar 12, 2011

I have successfully setup the camera at home, that I can use the mydlink website to view. But when I go to work and open my IE to view, it does not connect to the camera. Do I know to do something at the router to make it unblock or some sort?

View 1 Replies View Related

D-Link DCS Network Camera :: 920 Loosing Connection To Router

Oct 13, 2010

I have just purchased a DCS 2121 (I assume that it is a similar model to the DCS 920 in US).I have this setup:

- Connected the DCS 2121 wireless to my Belkin Router with a fixed IP address. Firmware version 1.4 is installed on the camera.

- I have a Synology 209 NAS server with surveillance station that I have connected to the Camera.

I all works fine for 5 minutes to a couple of hours at which point the DCS 2121 loose connection to the Router and does not try to reconnect. If I turn the Cam on and off it will reconnect - and then loose connection again af a short time.This is totally frustrating since the purpose of the Cam is to work as a surveillance cam - it kinda loose its value by not being connected...

View 1 Replies View Related

D-Link DCS Network Camera :: Schedule A Reboot Of DCS2102?

Oct 17, 2010

Any way to schedule a reboot of a DCS2102?I've got 3 of them here, and they are very good but every now and then they seem to stop writing to the storage.  They haven't frozen cause I can still connect to them via a browser

View 2 Replies View Related

D-Link DCS Network Camera :: Configure 910 Webcam If Don't Have Software CD?

Oct 7, 2011

How can I configure DCS 910 webcam if I don't have the software CD?

View 4 Replies View Related

D-Link DCS Network Camera :: No Sound On Playback With 2121

Mar 29, 2011

I didn't get a reply with this question lost in another thread so I thought I'd try again.  As far as I can tell the 2121 has an extremely weak microphone.  I can barely here it 'live'. 

The biggest problem is that when I record it the the Main Console program I hear nothing on playback.  Does anyone have a DCS-2121 camera that records sound properly so it can be heard on playback using the standard D-Link software program?

View 2 Replies View Related

D-Link DCS Network Camera :: 920 - Mini Window (Gadget)?

Mar 28, 2011

I work for a company where we just put up a DCS-920. We're an IT company so always at our computers. I have everybody logged into the ip webpage to see who's coming in/out. Any function or similar to a windows gadget that can be made for the camera? So it's basically part of your windows desktop, don't have to open/close it all the time

View 2 Replies View Related

D-Link DCS Network Camera :: 920 - Changing Admin Password?

May 16, 2010

Im having some problems changing my admin password on my DCS920

I know the default login is Login: admin / Password: "blank"

So I go into maintence, and there's an option to change the password.

it lists:

old password
newpassword
confirm

So I leave the old password blank and type in my new password in the following 2 spaces. I click apply and a window pops up asking me to enter username and password. I just enter admin and leave the password blank. I hit ok, and everything seems to update ok. So i log out, and try to log back in.

A window pops up asking me for my password. I type in admin for my username, and my new password, and it wont work

I type leaving the username blank, and type in new password... WONT WORK

I type admin, and new password again.. WONT WORK

I try password with first letter capital.. WONT WORK

I try password with ALL CAPS... WONT WORK..

Basically it wont let me log in as admin anymore. I figure I may have typed the password wrong the first time so I reset the camera and try the process again.. SAME PROBLEM.

Am I doing something wrong in changing my password ?

I dont wanna leave my default admin login as admin/"blank" , but when I try and change the password, it wont let me log in again as admin.

View 4 Replies View Related

D-Link DCS-930L :: Camera Not Detected Anymore On Network

Nov 5, 2012

LED is solid red (front) and solid blue (rear). try resetting thru the pinhole button but problem still the same. Camera not detected anymore on my network. I've try switching on and off, problem still there.

View 4 Replies View Related

D-Link DCS Network Camera :: Login DCS 950G Via IE9 Or Chrome?

Apr 15, 2012

everything was ok with my connexions, but, after a crash, when I run IE ou Chrome, I get the login screen of the 2 cameras, and I can enter my login en my password but after validation, nothing happens...This problem is only on my PC windows 7, and I can connect with all others stations LAN or WAN.All I remenber is that I have to delete a file in the system folder of my PC but what file ?

View 3 Replies View Related

D-Link DCS Network Camera :: 920 - Crashes / Requires Reboot

Aug 3, 2009

Have 13 DCS-920 Every few days a few random cameras will will hang/become unresponsive at random intervals.  The cameras require that I unplug the cameras before they will respond. When the cameras are unresponsive I cannot access the camera via a web browser, the D-View Cam software, or the setup wizard. This is a problem as they are all mounted in positions requiring a ladder to access.

I have some connected via 802.11g and other hard wired over 10/100 cat-6 Ethernet cable.

View 14 Replies View Related

D-Link DCS Network Camera :: 2130 Can't Handle Direct Sunlight?

May 13, 2013

I just bought a DCS-2130 for outdoor use (city landscape through my window in the nineteenth floor), and I'm trying to get it work during the daylight, but I'm having some problems.It seems like this camera can't handle direct sunlight, and in these situations the image gets blurry, even when I set the exposure to auto with max of 0dB in setup menu. Simply there's nothing I can do in this options menu to solve this problem.As the day passes by (and the sunlight gets weaker), the image gets better 'til the night, when it's perfect.What I need to know is if there is any way to setup it properly for daylight use. Is there possible to setup these exposure parameteres some other way, like editing an .ini file or something like that? Or this expensive camera simply can't handle this?

View 7 Replies View Related

D-Link D-ViewCam :: Unable To Find Camera (942l) On Network

Apr 3, 2012

Just got this & set it up today. Wanted to buy a couple more in the next few days; but wanted to test out the D-Viewcam service. The application (D-Viewcam) is not able to find my camera.I have 'ticked' the uPNP & the forward; tried to disable it as well. No luck.

Camera 942l is on ver 1.1
D-Viewcam = v 3.2
Both reside on the same LAN

I'm able to view the camera on the browser. And on my phone.

View 1 Replies View Related

D-Link DCS Network Camera :: 2121 - Recording Stopped Using Samba?

Jan 28, 2012

I record on motion to an external drive using samba.  I get around 20MB before it just stops recording (samba full condition signaled). This is a one TB drive with nothing much on it.

View 2 Replies View Related

D-Link DCS Network Camera :: DSC-2121 / View Images Without Login?

Nov 3, 2011

On my website I want visitors to be able to see the picture from my DSC-2121 using the example [URL] without having to enter user name and password. To begin the URL with "http://user:passwd......." no longer works in IE.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved