D-Link DIR-615 :: Router Set Up Fine But Kindle Wireless Password Not Ok
May 3, 2013
I bought a Kindle whitepaper that uses Wi Fi. Other than going to a free wi fi location to download Amazon books, I decided to buy a router. Everything seems to be ok at the router end I believe. But when I use the wireless feature on Kindle, type in the password I assigned to the router, it always, I mean always, no matter how many times I set up, reinstall the router, and try to log into Kindle storefront using my kindle, Kindle always returns the message "Incorrect Password". Now I don't have a problem with the router. I'll keep it for future wi fi usage. I have done an installation with no password and can then go to Kindle storefront on the Kindle but that is rather insane to not have a password while I am reading books on Kindle. Why the password I assign to the router isn't working with Kindle after I reset the router (using a paper clip method) and reconfiguring with the new username and password like 5 times already? The username appears ok on the Kindle wireless, just the password doesn't work. I'd like the issue resolved before I buy more wireless products. Great router.
Product: DIR-615
Hardware version: H/W Ver.: I1
Firmware version: F/W Ver.: 9.02NA.
View 1 Replies
ADVERTISEMENT
Apr 16, 2013
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
I just bought and installed this wireless router, specifically so that I could use me kindle..but, keep getting rejected due to a password error...the password is correct. On Amazon it looks like there may be a setting that needs adjustment in order to accept the Kindle..
View 2 Replies
View Related
Sep 1, 2012
I have WRT54G2 that I've set up my wireless network on. My Kindle, just the basic one, sees and recognizes the network. It has good signal from it. When I attempt to sign in though the Kindle says my password is invalid or it says it just can not connect. I have gone over and checked what I hope are all the settings but to no avail.
View 1 Replies
View Related
Jul 15, 2011
I have tried to connect my Kindle to my E3000 without success. The Kindle shows that the router is there but after entering my password in the Kindle it will not connect. I tried going into Cisco Connect and enable "Guest" user. Again the Kindle shows that the router is there showing "Guest User" and after entering the password for the guest user it still will not connect. The Kindle does connect to the internet through a router that is shown - I have no idea whose router it is - but at least it proves that the Kindel will connect to the internet.
View 2 Replies
View Related
Oct 28, 2012
When i try to connect kf to wifi router, I keep getting password error message when I type my network pw. I have no problem connecting to other wifi connections
View 6 Replies
View Related
Nov 18, 2012
What are the steps I need to take to correct this so we can download books from amazon .Password on Kindle is not accepted by the Linksys router
View 2 Replies
View Related
Feb 11, 2011
I have a kindle which was successfully connected to my router at Christmas 2010 unfortunatley some thing went wrong ?? have tried using the long serial number which i assume is the password on router . Kindle is telling me the number invalid try again. I have Sky broadband . The Kindle remembers the SSID; number . i have network key number as well but not sure what im suppose to do.
View 2 Replies
View Related
Jul 7, 2011
I have a westell router but I cant find the numbers to put in my new kindle
View 2 Replies
View Related
Mar 19, 2012
need to set up a password for my kindle fire
View 1 Replies
View Related
Feb 4, 2012
Netgear router works perfectly. Have cable internet, everything works great. want to connect my new kindle to Netgear. Kindle asks me for the password and I no longer remember what it is. Could you tell me how to either find out what I named it or tell me how to change it?
View 1 Replies
View Related
Jul 31, 2012
Want to connect to kindle but can't recall netgear's password
View 1 Replies
View Related
Apr 9, 2012
My DIR-655 has worked well for 3 months; both Ethernet and wireless. Yesterday I accidentally deleted this WiFi router from my Kindle Fire list of WiFi connections. Now, when I try to re-establish Kindle wireless logon, the router will not accept the previously used password.As a non-techno-geek, I tried to find this in the DIR-655 manual. But it is written in Greek and not oriented to the wireless user. [code]
View 3 Replies
View Related
Jul 29, 2011
As of two days ago my DIR-655 seems to have stopped loading webpages every 10-30minutes for periods of up to 5-15 minutes, as in they the reloading icon will constantly be circling and the webpage remains blank, no error or anything until it says failed to load on my web browser (tried multiple browsers such as Safari, Chrome, IE and Firefox). This problem occurs on every computer on my network, laptops (both Mac and PC) and desktops. When this problem occurs all lights on modem and router seem to be normal no signs of anything going down but I originally thought that this affected wired and wireless but I seem to have narrowed it to culprit being the wireless. When connected to the PC I can browse for an indefinite amount of time without the webpages failing to respond, however when I connected to WiFi through Airport on a Macbook Air my webpages start to begin failing to load around 5-10 minutes of browsing which affects all computers connected to the network (essentially all computers failing to respond to the internet during this outage).
Interestingly when this problem occurs, if I am connected to Skype or Aim it will stay connected and I can still chat with people but I will not be able to sign onto AIM if the problem occurs before I sign on and I try to sign on during the outage. If I am streaming a video from justin.tv or ustream it still continues to stream during this "outage".I have the revB of the DIR-655 and have tried resetting the modem, turning off the firewall, upgrading firmware to 2.03NA from 2.01NA and setting the MTU to 1400 (default 1500) with nothing working. I am using Time Warner Wideband ISP and have connected the modem directly to my PC and for the 30minutes or so that I tested the web browsing it seemed fine and did not have any errors.
View 14 Replies
View Related
Feb 16, 2011
I had to reboot my Dir 655 because my 2 wireless laptops wouldn't connect to the internet. Once I reset all of my static IP settings in the dlink admin tool the wireless laptops work fine. The problem now is that I can't connect to the internet on the computer that is hard wired into the router. I recall once before having to adjust the TCP/IP settings in the Network settings, but don't remember exactly what it was the I had to do.
View 15 Replies
View Related
Nov 30, 2012
Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : Alice (Telecom Italia)
I have just bought this new device, installed, DSL is working fine but not the USB printer sharing. Allways tells me: "This system was not supported yet." Here is the message box: usb_printer_error.JPG.I have a HP DeskJet 1050 and a Canon Pixma MP150 machine. I know, the HP is not in the supported printer list, indeed Canon is.
View 13 Replies
View Related
May 13, 2011
I have the Dlink DIR-655, Rev-A, HW 1.35NA Wireless Router Before you ask, I have reset the router to factory defaults, and reinstalled the latest firmware twice, most recently after trying everything else I could think of.I have Cable internet, ALWAYS using wireless, NEVER using wired except for the router installs, which worked just fine until I switched from my old D-Link router to this 655 one a few weeks ago.Now, very frequently, I will open ANY webpage, and the internet will lag, 5, sometimes 10 or 15 seconds and then suddenly it will work properly for a while... only to happen again a little while later - completely randomly it seems.I wired the router to the computer to check to see if the lagging still happened, and everything was fine.I am using a 1-year old Dell laptop, using Windows 7 Home Premium, 64 Bit, and the Network Adapter is Intel WIFI Link 5300 AGN with the most up to date driver confirmed. Under the Advanced Tab for the Laptop's Network Adapter, the settings are as follows:
802.11n CHannel Width for band 2.4 - Value: 20MHz Only
802.11n CHannel Width for band 2.4 - Value: Auto
802.11n Mode - Value: Enabled
There are a number of other settings which I am confident are not relevant, but happy to provide The last setting is: Wireless Mode - Value: 6. 802.11a/b/g In the DLink Configuration, the relevant settings are:
802.11 Mode: Mixed 802.11N and 802.11G
Wireless Channel is on 10, so as not to use the most common "11"
Channel Width Auto 20/40MHz
DNS Relay Enabled
DHCP Server Enabled
Range: 192.168.0.100 to 192.168.0.199
[code].....
Under WAN, the Primary DNS Server numbers are showing and the Secondary DNS Server numbers are showing as 0.0.0.0 McAffee Anti-Virus is up to date and shows no viruses, nor to the Dlink Logs - McAffee Firewall is turned off, Enable SPI in Dlink Settings is turned on.this problem only occurred when I switched routers recently, the old DlInk router I had never had this issue. And I am using a completely different network name with this new router to avoid any conflicts there. And this problem does NOT occur when hardwiring the laptop to the router directly, it only happens via wireless.Storage of the router is fine, it is in the same spot as the old router was, not to hot, not too cold, it didn't eat any metal for breakfast and there are no MRI machines within 10 miles.
View 2 Replies
View Related
Feb 11, 2012
I expect to receive a new Kindle Touch w/WiFi next week.I presently have my RR modem plugged to the DIR-655 and one Ethernet cable from the router to the PC and another (a 40' Cat6 Ethernet cable) going from the DIR-655 to a bus and then to an Internet-ready HDTV. I'm able to watch NetFlix streaming movies.I'm wanting to know step-by-step for each setting for my DIR-655 so that I can download books via WiFi to my Kindle Touch from Amazon's library.I have Windows 7 Home Premium 64x Media Center Player?
View 3 Replies
View Related
Dec 24, 2011
I originally bought the 615 router because my Net Talk telephone required it. The first Wi-Fi device I used is my Kindle Touch. I have been able to use the Wi-Fi several times since I received the Kindle, but there have now been two failures to connect. The first time I just unplugged the router power and connections, restarted the modem, and rebooted my computer. The Wi-Fi then worked. Now I am experiencing a failure to connect again.
I have noticed that when I restart my computer I have to connect to the internet directly by pulling the cable from the router and putting it from the modem to the computer. This seems to teach the router what it is supposed to do, because when I reconnect the modem to the router the internet starts to work immediately.I have tried changing the password to wireless internet, but my Kindle still will no longer connect. The router is about two years old. [code]No go to the devices and check to see if you see the new SSID name you gave in the router. I should be listed there. Select it and it should ask you for a password, enter the password you gave in the router. The only problem is that my modem does not exactly say "mixed G and N".
View 1 Replies
View Related
Feb 11, 2012
I just acquired a Kindle Fire for my wife. Joined my Dir-655 network just fine. I have never done a firmware update (using 1.10) and have lived by the "if it ain't broke. " axiom. Dell laptops, Mac laptops and desktops, Wii, X-box, LG Cinema TV, Roku, iPad, multiple iPhones and iPods all connect and work fine (with the occasional (once a month) reboot of the router necessary). Using cable modem (bridge mode), no historic issues. Suddenly when the Kindle Fire is utilizing the network at the same time as one or two other devices, the network crashes, and a power down reboot is necessary. A Google search reveals a fair number of complaints about this across router brands.
View 1 Replies
View Related
Dec 29, 2012
What in needed to setup wireless for an kindle fire pad? I have a netgear router
View 3 Replies
View Related
Jan 26, 2012
I have a wireless connection with my laptop.on a Belkin G router but can't get it to hookup to my Kindle Fire.what do I need to do?
View 2 Replies
View Related
Dec 29, 2011
Kindle fire won't connect to my router WRT320N- I have the correct password- signal strength is excellent- I have set up other devices without problems- prompt reads "connection error unable to connect to access point. Please check the password you have provided."
View 3 Replies
View Related
Jan 8, 2012
I cannot connect my kindle to my wifi... I installed a wrt12oN router and it when i try to connect my kindle it comes up unavailable .
View 1 Replies
View Related
Oct 4, 2012
I have the WRT120N. It seems to work for the computer and for Netflix through the BluRay, but I cannot connect my Kindle, my son's Kindle or either my ormy husband's phones anymore. They used to work.
Also, the free trial of Network Magic is over and it can no longer be purchased. Do I really need something like that?
View 3 Replies
View Related
Jul 25, 2012
E1550 not connecting to any Google related sites via Kindle Fire web application (Silk) in Kindle Fire. Other wireless devices working fine from E1550 and all apps in Fire connecting fine.
View 5 Replies
View Related
Sep 11, 2011
I have a WRT5G2 V1 wireless router. I cannot connect to the internet with my kindle,I-pod and Wii. I had this problem a few years ago when I bought this device for my laptop.
View 7 Replies
View Related
Jan 25, 2013
how to reset password for wireless d-link router
View 2 Replies
View Related
May 17, 2012
I have set up a password and stopped using my wireless and now i cannot remember the password, opps. is there any way to remove the password or reset it?
View 1 Replies
View Related
Jan 24, 2012
I have kindle fire that is unable to connect to the wireless network.All otehr devices windows phone, xbox and laptop are able to connect seamlessly.Amazon also sent me a replacement, but the issue is still the same. The error is:
"Unable to connect to the selected access point, Please check the password you provided."
Also, I removed the security on the network to see if its able to connect without password.The state where it fails is Obtaining IP address and it fails again.
View 1 Replies
View Related
Jun 30, 2012
how can I set password for my wireless internet? I used to have one, but today I have fully restarted modem and router to factory settings, so password is gone. Now I'd like to set it up again, I have TP-Link router.
View 1 Replies
View Related
Oct 23, 2012
How can I find out the password for my wireless internet router without re-routing it? It is not written on the router and i do not want to pay someone to come in and re-route it. I want to be able to connect for my iPod touch and PS3. I have a D-Link router?
View 2 Replies
View Related
Jan 21, 2013
I can follow directions and am fairly tech-savvy, just don't have the time to troubleshoot this stuff and run my business. Here's the rundown:Router:Cisco Linksys E1000 V2
-working fine until I unplugged to move it and plugged it in
-verified with tech support the problem is not physical
-right now, am hardwired to the router, which is hardwired to the cable modem, and connectivity is fine through hardwiring
-no luck through wireless - this is the error message I get:
This webpage is not available:The server at www.google.com can't be found, because the DNS lookup failed. DNS is the network service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Google Chrome from accessing the network.
View 9 Replies
View Related
Jun 9, 2011
I have been using my DIR-655 for about 2 weeks now with Road Runner wideband services. Starting yesterday my internet became very slow and I discovered the cause was the router. I tried resetting it to factory settings and things will be fine and run smoothly for about 5-15 minutes but after that it goes back to being extremely slow. My speed tests would go from 10ms (normal) to 250-450ms. Before this issue occurred the Dlink was perfect, had full speeds. I am running a wire Ethernet connection.
I am currently using revB and tried upgrading firmware to 2.01NA which had no effect, but make my internet seemingly go back to normal for the first few minutes then nosedive again. I have also changed my speed/duplex settings in Network Config to 1gbs Full Duplex. I've also disabled QoS, and still no change. Not sure what else to do. When directly connected to the modem everything seems fine. The modem is also the provided Motorola SBG6580 which I have called Time Warner to set the modem into bridge mode and have the DIR-655 connected to it.
View 12 Replies
View Related
