i have a LINKSYS WRT54G router .. i bought an apple ipod touch recently and i am unable to connect it to my wifi network. My ipod detects the wifi network but when i select it , it asks for password. now i dont know which password is this bcoz everytime i poer on my computer or laptop i never type a password b4 accessing internet.. it is auto connected. i know the admin password for my router but that is denied by ipod to connect to internet. Is there any other password we have to give for connecting deveices through LINKSYS or some changes i need to do in my connection ?
Kindle fire won't connect to my router WRT320N- I have the correct password- signal strength is excellent- I have set up other devices without problems- prompt reads "connection error unable to connect to access point. Please check the password you have provided."
I have tried to connect my Kindle to my E3000 without success. The Kindle shows that the router is there but after entering my password in the Kindle it will not connect. I tried going into Cisco Connect and enable "Guest" user. Again the Kindle shows that the router is there showing "Guest User" and after entering the password for the guest user it still will not connect. The Kindle does connect to the internet through a router that is shown - I have no idea whose router it is - but at least it proves that the Kindel will connect to the internet.
I have kindle fire that is unable to connect to the wireless network.All otehr devices windows phone, xbox and laptop are able to connect seamlessly.Amazon also sent me a replacement, but the issue is still the same. The error is:
"Unable to connect to the selected access point, Please check the password you provided."
Also, I removed the security on the network to see if its able to connect without password.The state where it fails is Obtaining IP address and it fails again.
I cannot connect my Kindle Fire to my Wi-fi router.It works when I'm out and about ie it connects to the internet but never when at home. I have also tried connecting via a static IP but that also fails. When attempting to connect my Kindle Fire if I have another device already connected eg my LT or DT they also become disconnected
I have NM 5.5.9195.0 and WRT120N Linksys router. I have an Ipod using WIFI to connect to the network which I would like to restrict times for. Using the access restriction page in the manage/setup of the router seems to not work well. The system does recognize the MAC address of the Ipod but setting times to allow or deny gives me odd results. The allow button actually denies use for one thing. Secondly, the deny time ends, but the Ipod still cannot connect sometimes. It is like the system gets stuck in deny. I have tested using a random 5 minute deny time period, yet the Ipod is denied all times. The system is consistent in denying the Ipod (actually using the allow button) but not on the times.
Both the iPod and iPhone were on the network and working and now neither is on and don't detect the network at all. Have turned off and on both devices as well as the router to no avail. My mini Mac is up and running and has been all day.
I have WRT54G2 that I've set up my wireless network on. My Kindle, just the basic one, sees and recognizes the network. It has good signal from it. When I attempt to sign in though the Kindle says my password is invalid or it says it just can not connect. I have gone over and checked what I hope are all the settings but to no avail.
I have an E4200 functioning with a new Comcast/XFinity cable modem on the public IP (Internet) port. That modem provides a DHCP address to the router (currently 50.129.x.x./255.255.254.0) The problem is that this new setup is leaking COMCAST DHCP responses through the E4200 to my WiFi clients. Most of the clients (newer iPODs, laptops) are smart enough to behave correctly and use Wifi Protected Setup. This problem means that one older iPOD seems to be receiving the Comcast DHCP (as 192.168.33.0/24 range) instead of E4200 Wifi DHCP range (as 192.168.1.0/24 range). I imagine the most direct solution is to pull the public connection briefly and allow the iPOD to fetch a valid WiFi DHCP from the remaining DHCP server on board the E4200. HOWEVER, I'd like to configure the router to suppress all DHCP packets from the Comcast network - or otherwise make sure the WiFi clients only receive DHCP from the router and not the Comcast modem.
So we run an internet connection through a DLINK Wirless router. All of our compters connect fine, as soon I try to connect through my ipod touch the connection drops. I think what happens is that my ipod shares the same ip address as my computer and it drops.
I have several WAP2000 (Firmware 188.8.131.52), and while they work fine for PC's, iPhones, iPod touches cannot connect to them.Well, they connect briefly, get an IP address from the router, and immediately drop the connection to re-connect again.I have tried changing channels, eliminating all but one of the AP's, and so forth. Any issues with this firmware? I see posts where people are saying their iPhones connect up fine. This happens on versions 3.x and 4.x of the iphone O.S. It's not limited to one iphone or ipod touch; we've tried several.
I'm trying to connect my Ipod to the internet for updates that i cant download directly with my laptop. I'm Using a Laptop (Vista) with a Built-in Wireless, and i only have internet access with a Telstra mobile internet USB.
I have created an Ad-Hoc network, but still can't get my ipod to connect to it. and i can't bridge my USB Internet connection (shows up under dialup) with my ad-hoc network (shows up under LAN/High Speed Internet). I have also changed the settings for ICS.
Region : UnitedStates Model : TL-WR1043ND Hardware Version : V1 Firmware Version : ISP :
I just bought and installed this wireless router, specifically so that I could use me kindle..but, keep getting rejected due to a password error...the password is correct. On Amazon it looks like there may be a setting that needs adjustment in order to accept the Kindle..
I have a BT homehub V2, I have 2 computers connected via cable, a laptop wireless an iPhone wireless and an iPod touch wireless. The cabled computer is not connecting and neither is the iPod touch, but the iPhone seems to be, as I did a speed test on it, which is giving my usual speed result. I don't no if the laptop is connecting as it's my daughters and I dare not go near it, It does not make sense to me that the iPhone is still connecting. The speed result was around 7mps
My home WiFi network security is set up with MAC filtering and WPA-PSK encryptionAll my WiFi devices, ( Laptops, Android, Internet Radio, TV Streamer connect and work ok . However I cannot connect my Ipod to this WiFi network. When I try to connect I get " Unable to Join Network " . When I disable the Mac filtering on my WiFi it connects OK. My router is a Netopia 2247NWG and my Ipod is an Ipod Touch 4th generation running Ios 6.0.1 and is up to date.I've checked and double checked the MAC address in the MAC filtering table and I've deleted it and added it again but to no avail. The easy answer is " Disable the mac filtering, its not needed " but I have a specific reason for using it.
Mi ipod has internet but not my laptop, my dad's compu and my brother's laptop. The funny thing is that my other brother got home from a trip and turn on his laptop and pc and they both work having internet. We have restarted the modem and router and nothing works.
My mother accidentally turned off wireless or changed the password to the 2WIRE778 that we have and I can't get wifi on my iPod. So I have a small motorola router and it's wireless so if I hook it up to the original 2WIRE that has blocked wifi do you think I can get wifi off the second router with no password troubles or would I have to buy a special router that has no password? I don't know a lot about computers. And my Meyer has a password on our computer so I can't log on. so if I just hook up the 2nd router and possibly get WiFi do I need to do anything such as setup on the computer or can I plug it in and just go?