I cannot connect my Kindle Fire to my Wi-fi router.It works when I'm out and about ie it connects to the internet but never when at home. I have also tried connecting via a static IP but that also fails. When attempting to connect my Kindle Fire if I have another device already connected eg my LT or DT they also become disconnected
Kindle fire won't connect to my router WRT320N- I have the correct password- signal strength is excellent- I have set up other devices without problems- prompt reads "connection error unable to connect to access point. Please check the password you have provided."
I have kindle fire that is unable to connect to the wireless network.All otehr devices windows phone, xbox and laptop are able to connect seamlessly.Amazon also sent me a replacement, but the issue is still the same. The error is:
"Unable to connect to the selected access point, Please check the password you provided."
Also, I removed the security on the network to see if its able to connect without password.The state where it fails is Obtaining IP address and it fails again.
My DIR-655 has worked well for 3 months; both Ethernet and wireless. Yesterday I accidentally deleted this WiFi router from my Kindle Fire list of WiFi connections. Now, when I try to re-establish Kindle wireless logon, the router will not accept the previously used password.As a non-techno-geek, I tried to find this in the DIR-655 manual. But it is written in Greek and not oriented to the wireless user. [code]
I just acquired a Kindle Fire for my wife. Joined my Dir-655 network just fine. I have never done a firmware update (using 1.10) and have lived by the "if it ain't broke. " axiom. Dell laptops, Mac laptops and desktops, Wii, X-box, LG Cinema TV, Roku, iPad, multiple iPhones and iPods all connect and work fine (with the occasional (once a month) reboot of the router necessary). Using cable modem (bridge mode), no historic issues. Suddenly when the Kindle Fire is utilizing the network at the same time as one or two other devices, the network crashes, and a power down reboot is necessary. A Google search reveals a fair number of complaints about this across router brands.
My mom wants to buy my dad a Kindle Fire for Christmas. Currently they have a desktop computer with a modem plugged into it and use Verizon dsl for their internet. The Kindle needs wi-fi and I don't want to disrupt the way their computer is set up now.Do I simply plug the router into the modem to get the wi-fi signal?
I am trying to get my parents Kindle Fire to work. They recently purchased a Motorola Modem/Router which is hooked into the desktop and works fine. I want to get their new kindle to work and can not seem to figure it out. Their operating system is Vista which I can upgrade to Windows 7 if that would make it easier. When I click on setup the WiFi part of the installation wizard cd that came with the Motorola it says there is not a network adapter. I know what that is however I do not know why I would need it when the desktop is hooked directly into modem/router and I just need the WiFi for Kindle.
I have a kindle which was successfully connected to my router at Christmas 2010 unfortunatley some thing went wrong ?? have tried using the long serial number which i assume is the password on router . Kindle is telling me the number invalid try again. I have Sky broadband . The Kindle remembers the SSID; number . i have network key number as well but not sure what im suppose to do.
My group has recently started configuring traps on our switches to alert us of issues as they arise vs. waiting for the Helpdesk to receive user complaints and then responding.We have successfully configured the 2950 and 2960 switches to alert us when a port-security violation happens. However, the 3750 switches refuse to fire the port-security violation traps. The 3750's will fire an errdisable trap when the port goes down though.
And here is the output of the port-security debug:
2522070: Oct 21 16:37:04: %LINK-3-UPDOWN: Interface FastEthernet1/0/45, changed state to down 2522089: Oct 21 16:37:05: %PM-4-ERR_DISABLE: psecure-violation error detected on Fa1/0/45, putting Fa1/0/45 in err-disable state 2522100: Oct 21 16:37:05: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0012.3f07.95d3 on port FastEthernet1/0/45.
All of the 3750's are running C3750-IPBASEK9-M, Version 12.2(53) SE2. Wireshark also shows the errdisable traps, but no other traps so I've ruled out the traps being missed. All of the switches have been reloaded and power cycled.
Region : UnitedStates Model : TL-WR1043ND Hardware Version : V1 Firmware Version : ISP :
I just bought and installed this wireless router, specifically so that I could use me kindle..but, keep getting rejected due to a password error...the password is correct. On Amazon it looks like there may be a setting that needs adjustment in order to accept the Kindle..
I have tried to connect my Kindle to my E3000 without success. The Kindle shows that the router is there but after entering my password in the Kindle it will not connect. I tried going into Cisco Connect and enable "Guest" user. Again the Kindle shows that the router is there showing "Guest User" and after entering the password for the guest user it still will not connect. The Kindle does connect to the internet through a router that is shown - I have no idea whose router it is - but at least it proves that the Kindel will connect to the internet.
I am trying to connect 2 wireless routers to expand my wireless signal. I want to connect the router 1 (in 2d floor) to a powerline av and then get the router 2 to the powerline (in the ground floor) so i can have wireless there too. I've tried some configurations i found online, but can't get to make the network functioning. The routers and powerline av are all dlink. I don't mind having 2 networks, but it would be better to have only one
I have a Netgear WGR164v9 wireless router connected to internet directly by public IP and this router performing DHCP for wireless LAN ip subnet is 192.168.1.x. A server (DNS,DHCP & RRAS with NAT) connected with this router by ip 192.168.1.6 which has another subnet 192.168.10.x for LAN PCs. In this situation everything is fine like internet browsing. The only problem is wireless PCs (192.168.1.x) can't connect with wired LAN PCs (192.168.10.x). The router ip is 192.168.1.1. How can I configure to connect those two subnet's PCs?
I have a wireless router at home and i have a PC and a mac enabled for it. I have recently bought an IPAD and i can't connect for some reason. When asked for the password it doesn't enable me to connect so I'm worried that i've forgotten my password.
I changed my netgear wireless router password and now my laptop will not connect to the router or to the internet. It has no popup to put the new password. I have no problem logging on with my phone...just the laptop.
I just bought a sony vaio laptop and I can't connect to the wireless network, it appears back and forward a message saying that the adapter is not found and then it says it is working and then it is not found again and so no.. Tried to connect the laptop using the WPS button but it did not work either.
How do I use an Actiontec 1000 modem (with wireless) and a TP-Link 4 port cable/DSL router and still have a wireless signal? When I connect the ethernet from the modem to the router, the router lights come on but the wireless signal goes down. Want 2 PC's wired (only one port on modem) and still want wirelss signal.
This model is FK91105v1. It is great with our ten different devices (possibly even a dozen?), but it continues to disconnect a Kindle Fire - that used to connect with no problem - evidently upon acquisition of a newer Kindle Fire. As long as MAC Filtering is not enabled, then there shouldn't be an issue of a "white list" - which the Kindle manual suggests as a solution ("If ... filtering is enabled, ensure your Kindle's MAC address is added to your router's white list in your network settings"). (I did figure out how to go to the network address, but was mostly flumoxed from there)