D-Link DIR-655 :: Blocking Traffic On Port 80 Except For Google Earth

Mar 29, 2012

I've blocked all traffic on port 80 (Advanced-Access Control- Apply Advanced Port Filter- All IP range and Port 80 selected) to avoid any kind of Web Access. I won't use Web Filter because there are too many URLs to be blocked.

However I have a problem to keep Google Earth working, since it uses port 80.

Is there a way to keep Google Earth working, even blocking traffic on Port 80? I've tried configuring an application rule to let Google Earth working, but it didn't work (it seems that I can not create an exception for Filter Port) .

View 9 Replies


ADVERTISEMENT

Get Details Of Any Destination Location Through Google Earth

Mar 31, 2011

how to get details of any destination location through google earth?

View 4 Replies View Related

Outlook Or Google Earth / Talk Does Not Work Properly?

Nov 12, 2011

I have a new Lenovo Ideapad laptop and Im having problems connecting to internet using ethernet cable. The thing is this problem occurs only at one particular place (dorms) because Im having no internet problems at other locations.

It looks like this: I connect using ethernet cable, Windows 7 identifies the network and everything looks normal, but there is no internet when I open a browser (I tried IE, Firefox and Chrome). It just loads and loads and sometimes it loads my Google homepage, but only after approximately 30 seconds or it does not load it at all. The same applies for other pages - they do not load or they load after a minute, but the pages are incomplete, they look like HTML

When I do a ping at CMD, it shows the same problem, the replies are slow or it shows "request timed out". I tried pinging various pages or IPs with same results. The only thing Im able to ping normally is the IP of my network adapter. My IPv4 is set to automatic, but I also tried manual parametres, just in case.I tried 3 different cables, switching antivirus and frewall off, did spyware search, switching IPv6 off, switching WiFi off, reseting the main dorm router etc etc...

Strange thing is that my laptop works perfectly anywhere else (home, work...) so I suppose there is no problem with the configuration of my laptop or network adapter, BUT the internet provider says there is no problem with their network or router since other laptops works normally at THAT location (even my other laptop does work there), so mine Lenovo is the only laptop which is having problems... and when I check the properties of the network, upload is always higher than download, but generally both are very small one more strange thing: I can watch live stream videos using one particular software and I can download torrents quite normally, but loading Google and other pages is a major problem, even Outlook or Google Earth/Talk does not work properly

View 16 Replies View Related

Cisco Firewall :: Blocking Outbound Port 80 Traffic Using ASDM On ASA 5510

Nov 26, 2012

I am attempting to block outbound traffic for a specific PC on my LAN using the ASDM.

View 2 Replies View Related

D-Link DIR-655 :: Internet Earth Icon Flashing Forever?

Jan 4, 2011

I read somewhere this is to show that the connection is unstable? My modem works fine, and it works fine being plugged directly into my PC.

But going through the modem, I am noticing some drops in speed and spikes of high latency. This icon - the little earth/internet icon - has never flashed for a long period of time before. I've power cycled it (unplugged for over 5 mins) and it persists.

Does it need a firmware upgrade? Is it something I did? Faulty hardware?

View 4 Replies View Related

D-Link DIR-655 Blocking Port 69 Outgoing

Jan 12, 2012

within ACS 5.3, I'd like to use 2 external authenticator for the same service, like vpn remote-access.For the authentication, I know I can create an identity chain, to query SecurID and then AD, in case of user not found in SecurID.For the authorization rules, I need to provider a wide vèn access for SecurID users and narrow vpn access for AD user.Are there some parameter to use in compound conditions for SecurID ?

View 1 Replies View Related

D-Link DIR-655 :: Internal Port Blocking / Routing?

Jul 14, 2012

Have a Rev. B1 w/207NA on Time Warner with a Moto Surfboard SB5150.Working with TiVo's, we've been through hell and back trying to resolve why Multi Room Viewing doesn't seem to want to work - but only one way!  The newest TiVo's their Premiere model with HD and all the bells and whistles, it sees the other TiVo and all the other software that can send programs back and forth with it.

I brought on a Series 2, which is an older model that's non HD and has some older software in it.  While the Premiere and the other PC's/Software around the building's network can 'see' the Series 2 and it can 'see' the other shared PC's, etc. the thing can't 'see' the Premiere.This has been going on for awhile, I've worked with TiVo Support also to unlock ports, IP addresses and anything else we could think of.  Still no luck.  Then we had a strange occurance!

The DIR-655 seemed to 'lock up' or disconnect from the Net.  One day I was surfing the Now Playing menu in the Series 2 and the other TiVo wasn't showing as usual.  I checked it again during a commercial for something totally different and suddenly noticed there it was!!  I thought it was weird, so I went out front to check with the person using the main TiVo if they had made any changes or done anything - they hadn't, but did mention their Net connection was gone.

I turned around and looked at the 655's status lights and noticed while all the rest were fine - the WAN/Net status light was totally out.  Not a single blink.  And then I looked at the Moto cable modem and noticed it's 'activity' light was also totally dormant.  I twisted the Moto to get a better look at it and things started working again, I tightened the cable modem cable on the rear and that was it.

From that point on - once again, the front TiVo won't show on the back TiVo!  Does every other way, but not that.  In our discussions on TiVo we thought it could've been the cable modem firewall or something, but I retested it and this time it had NO effect.  Tried not only taking out the cable-cable but the Ethernet cable as well to ensure all were tested.  Still didn't now up.  What I thought was going on was the 655 had turned into a giant 'Hub', which would've caused the TiVo's to use their old-fashioned Beacon software to 'find' each other.  When the 655 software kicked back in from that glitch, the hub setup would've obviously stopped and the 655's software settings would've kicked back in.

I have a complete list of the ports internally that need to be open for those two TiVo's to communicate, but I can't find anything in the 2.07NA GUI (or Help manuals) that tell me how to write a rule to open those ports internally.  I wouldn't think there's any internal blocking or firewalling going on (I have it set to allow communications between clients on the internal Net) but there's so many settings in this GUI it makes your head spin!

View 14 Replies View Related

D-Link DIR-655 :: Routing All HTTP / Port 80 Traffic To Proxy Server?

Jul 18, 2011

I have a setup like this.

Foreach computer I need to go and configure the browser proxy settings and some people are getting smart and turn it to automatic configuration again.

So what i want to achieve is to have my DIR-655 to route all the HTTP/port 80 traffic to the proxy server.
That way it is transparent and then it is not needed to configure each computers browser settings.

I am pretty new to this and the router configurations.

The proxy server works fine if i configure the browser manually.

View 6 Replies View Related

D-Link DIR-615 :: Accessing Google Using Android Via Wireless

Jul 16, 2012

Dir 615, hardware version E4, Firmware version 5.1.Intermittent (95% of the time), problem accessing Google using my Android via wireless. A PC using XP on the same network has no problems. Using the Android on my local library's network I have no problems.Have restored to factory default settings and reconfigured with no improvement.

Modem setup: Setup to connect to another router, UPnP disabled, DHCP server disabled, 802.11 mode -mixed 802.11n & 802.11g (Android connects using 802.11n PC uses 802.11g have forced Android to use 802.11g to no avail), Auto channel scan, (have tried fixed), Channel width 20/40, visible mode.Internet connection Dynamic IP of course it is going out through my other Dlink ADSL 2 modem router. Also disabled QOS engine.

View 9 Replies View Related

Cisco Firewall :: Blocking P2P Traffic On E2500?

Feb 15, 2013

networking but can understand with a bit of explanation.. I own a restaurant and provide free WiFi for my customers with a Cisco E2500, I am gettign bills that are through the roof, I contacted my ISP and was told users were accessing P2P downloads(uTorrent, etc.). How can I block these applications?

View 1 Replies View Related

Cisco :: 2500 Wireless Controller Blocking Traffic

May 16, 2012

I have a Cisco 2500 Wireless Controller connected and controlling 5 Cisco AP's.  Everything works fine except one device.
 
This device is used to connect to our AP wirelessly and then any of the wireless laptops can use programming software to connect to the device and program through it.  I can successfully set up our device on the network and all PCs can ping it, but the programming software refuses to connect to it.  I spent an hour and a half on the phone with the device people who assure me its the network.  So, I bought in a cheap Linksys router, hooked one laptop up to it and configured the device wirelessly.  With that, the programming software works.

what should I be looking for in the Wireless Controller that may be blocking direct connection to the device even though I can ping it?

View 10 Replies View Related

Cisco Firewall :: PIX 515 Blocking Outbound Traffic To Certain Sites

Oct 14, 2012

I have a LAN with several linux boxes (Fedora 17, both 32 and 64 bits),  as well a a WInXP box. All of these are connected to the same switch,  which is connected to the inside port of my PIX 515.
 
For a few sites (mozilla.org happens to be one of them), for http access, the tcp connection is established, but the "GET" request - or anything else for that  matter - will not go through the PIX (from inside to wan). I have  verified this by first, using wireshark to watch the packets being sent  out from the client box, then by using the trace function in the PIX to  see that the packets ARE arriving at the inside interface, but ARE NOT  sent out of the wan interface.
 
This is for the linux boxes ONLY. When I do the same thing with my WinXP  box, all works: in the PIX trace, I see the packets arrive at the  inside interface, and leave the wan interace. And access to these sites  are okay.
 
(What's a bit weird, although somewhat expected, when I connect my android phone to my LAN via WiFi, it too is unable to reach those sites - but then again, android is linux, right?)
 
In addition to the tracing, I have narrowed this problem down by connecting a linux box directly to my DSL router, then replacing the PIX with a simple router/gateway. Both of those solutions work.
 
Some background:
 
I have been using this PIX for about 10 years now, with the same  configuration (except IP addresses). Only in the last several months has  this problem started to show up.
 
I got this pix from a dead company at a really great price (free), so I'd like to keep it, and not have to spend money on something  else. I don't have any support license, and have not been able to get  any software upgrades. Here is its version info:
 
taz(config)# sho ver
 
Cisco PIX Firewall Version 6.2(2)
Cisco PIX Device Manager Version 2.0(2)
 
Compiled on Fri 07-Jun-02 17:49 by (code)
 
Serial Number: 405200362 (0x1826ddea)
Running Activation Key: 0x38ac31f3 0x0630df47 0x9a77b805 0x8bc39a60

PS: Since this PIX is at its end of life, I was wondering if any of the  software upgrades would be now available without a license?

View 2 Replies View Related

Cisco Firewall :: 2921 - ZBFW Not Blocking Traffic From DMZ

Apr 22, 2013

OK, I have a 2921 on 15.3-2T. ZBFW is working from the inside to the outside, but the DMZ is not being blocked at all to the inside. I am currently running with subinterfaces. All interfaces have zones attached. I have policies from inside to outside and DMZ to outside, those work fine. Without any policy from DMZ to inside, it can pass traffic freely from DMZ to inside. I have tried making an explicit policy to drop all to inside, still passes. I ended up just having to put an ACL on the interface
 
I already tried upgrading the IOS, that is how I ended up on the newest version. This is connected to a 2960S with a trunk port. Everything else works perfectly except for the DMZ security. I haven't had time to try to lab it up yet, but wanted to see if any reasons this shouldn't work, as all documentation says it should drop all traffic unless you make a policy to pass traffic.

View 5 Replies View Related

D-Link DIR-601 :: Change Regular DNS Settings To Use OpenDNS / Google Public DNS?

Apr 12, 2011

I would like to change my DNS settings and I can not figure it out through the routers gui. I tried Google'ing it but I got nowhere.

View 2 Replies View Related

Cisco Firewall :: ASA5505 - Blocking Internal Traffic Between 2 Servers

Oct 25, 2012

I have a cisco ASA5505, it runs a wide site to site VPN network and has 4 servers connected to it
 
10.50.15.4 > fileserver
10.50.15.5 > domain controller (exchange)
10.50.15.6 > terminal server
10.50.15.7 > terminal server
 
Now yesterday i removed 10.50.15.6 and replaced it with a new terminal server with the same ip address, ever since the ASA is blocking traffic between it and the domain controller (example)
 
2Oct 27 201214:51:0510600710.50.15.655978DNSDeny inbound UDP from 10.50.15.6/55978 to 10.50.15.5/53 due to DNS Query What has me baffled is the only thing different between today and yesterday is the new server is windows server 2008 and the old one was windows server 2003. The new server has the same LAN ip address as the old one to make the changeover seamless for the users.
 
why all the sudden my ASA has decided to block the traffic between those machines? all the other machines can talk to it fine just not the domain controller, and seeing that this is a terminal server naturally you can see the problem i face!
 
this router has worked flawlessly for 2 years now without any config changes and i cant work out why its blocking traffic between those 2 machines.

View 15 Replies View Related

Cisco Firewall :: ASA 5540 Blocking Legit Traffic From Inside

Aug 21, 2011

I just made a move from a PIX 506 to an ASA 5540.  I have a user that currently logs into a web portal and runs a job.  It is now erroring out.  When I run the test it gives me the following message:
 
Testing ports...
Port 1433: Failed
Port 1150: Success
Port 80: Success
Port 443: Success
 
One or more tests have failed
 
The computer we access this site from is on the inside network and the ACL says permit ip any any from the inside out so I am not sure why it is failing.  Under the ASA Home screen I see the Top 10 Protected Servers under SYN Attack and it appears that the ASA thinks this is some sort of attack. 

View 1 Replies View Related

Cisco Routers :: RV110W - Firewall Blocking All Inbound Traffic

Apr 5, 2013

I have a RV110W that's been in service since Dec 2012. All Everything is working fine except every month or so the firewall starts blocking all inbound traffic. It does not respond to remote management access. If I reboot the firewall (pwr off/on) everything works correctly for the next month or so and then it begins blocking all inbound traffic again. Local access to the Internet and VPN tunneling are not affected. When it's working, all my rules and port forwarding work correctly.

View 2 Replies View Related

Cisco Firewall :: ASA 5505 NAT Rules Blocking Inside Traffic

Jan 7, 2012

Previous attempts to set up these NAT rules has been met with minimal success. We have been able to get the NAT rules created, and able to ping our inside servers and receivers from a  different outside network, but every time we get that far our internal network crashes.  Running the Packet Trace utility via the ASDM shows that internal traffic from the servers to  the workstations is being blocked by the default implicit rule under the access rule heading  that states "any to any, service being ip, action= deny". Reverse traffic from the workstations to  the servers is being allowed though. In an effort to start over again, the Cisco ASA has been  Factory Defaulted via the CLI, and has had it's Inside network, and Outside IP address set back up. DHCP pool has been setup for a minimal amount of addresses on the   inside network, since  most of our equipment will always be assigned statics. We reset our static NAT policies, and  seem to be having the same problem. My partner and I have been working on this for some time now, and have ourselves so frustrated that I know we are missing something simple. [code]

View 10 Replies View Related

Cisco Routers :: Sending All Traffic To VPN And Blocking Internet On Other End - RV042

Dec 28, 2012

I wonder if I can have a RV042 VPN Tunnel to a RV082, and in the RV082 block all traffic to the internet that comes form the PCs that are behind the RV042.
 
Remote PC -> RV042 -> VPN -> RV082 -> RV082 Firewall (block internet traffice, allow intranet traffic)

View 3 Replies View Related

Cisco Firewall :: 5520 / 4510 - ASA Is Blocking For Returning Traffic

Apr 2, 2012

My internet link is connected on Internet Router & below downwards Cisco ASA 5520 is connected.ASA is connected with core switch cisco 4510 on downwards. our web based mail [URL] is hosted outside.

Lets suppose ISP pool is 4.4.4.0/28.suppose owa server is Static natted on ASA with 4.4.4.4. my machine traffic is going to internet with same ISP with PAT on Cisco ASA & internet is working on my machine. if i want to access {URL} or ip base for mail access, its not working & also it is not pinging. i suppose to ASA is blocking for returning traffic.
 
is there any way to traffic will go via same Firewall & comeback on same firewall port?

View 1 Replies View Related

Cisco Switching/Routing :: Firewall On 1921 K9 Blocking UDP Traffic?

Apr 18, 2012

I have a 1921 K9 with a 4 port 10/100/1000 EHWIC switch.

Interface 0/1 = 192.168.1.0
EHWIC = 192.168.5.0
 
I have Active Directory setup on the 192.168.1.0 network. When I attempt to join the domain from 192.168.5.0 it joins but I get errors. After some troubleshooting using portqry I have found that the services related to class map DomainTrafficUDP are being reported by portqry as being filtered regardless of policy map settings (currently set to allow).
  
Building configuration... 
 
Current configuration : 18833 bytes
!
! Last configuration change at 11:20:25 NewYork Thu Apr 19 2012 by dave
! NVRAM config last updated at 13:56:45 NewYork Wed Apr 18 2012 by dave
!

[Code].....

View 2 Replies View Related

Cisco Switching/Routing :: ASA 5505 - Blocking Traffic To Specific IP Addresses

Sep 24, 2012

I inherited a Cisco ASA 5505 and am trying to piggy back the device off of an established Network.  Here is the basic layout:
 
192.168.10.1 (Core Router - Handles DHCP/DNS)
192.168.10.9 (ASA 5505 - Piggy backing off of Network)
192.168.40.x (ASA 5505 - VLAN)
 
I'm able to get onto the Internet without any problems.  Devices from the 192.168.10x Network can not ping the inside VLAN1 (192.168.40.x).  However, I would like traffic going from the inside VLAN to the Outside VLAN to be blocked, except for 192.168.10.1 and 192.168.10.9.  I've tried using ACL's but end up killing my Internet connection.  192.168.10.1 is the default route and is how I get out to the Internet.  Is this possible?  Essentially, I'm trying to set up a small Network that guests can connect to.  The idea is that they can get to the Internet, but that is it. They can't get to internal resources on the 192.168.10.x Network
 
Here is the config:
 
ASA Version 8.2(1)
!
hostname ciscoasa
enable password EeCsulrpu.9LalEE encrypted

[Code].....

View 5 Replies View Related

Cisco Switches :: SF200 Witches Will Simply Freeze / Blocking All Traffic Flow

Mar 18, 2013

We have been deploying Cisco SF200-24P switches for our systems for over a year now. They connect to a Cisco 881 router. In many cases we are also deploying Cisco AP541s.Over the last few months, on an intermittent basis, the switches will simply freeze, blocking all traffic flow. The power LED also goes dark. It appears the switch has frozen. The only thing that seems to revive the switch is a hard reboot by pulling the power cord. In the last couple of weeks, one site in particular has gone down a handful of times. That client of our is fed up. Our patience is running thin too.
 
I cannot see any indications in the logs to any event that might give a clue as to the problem. We definitely see this problem with the 1.2.7.76 firmware and the 1.2.9.44 (latest as of typing this). Not sure if with earlier 1.1.2 firmware.Without a fix, we likely will have to change switches and possibly vendors as we need a reliable switch.I see some vague references to a similar problem. And one reference to a SG300 series having what sounds like the same issue.

View 8 Replies View Related

Blocking Telnet On SQL Port Query

Mar 8, 2011

I was unable to telnet in to a SQL server on port 1433 to test the connection from the client PC.the application could connect and this alone verifies it is working on port 1433 for sql.My question is how can a telnet command on a specific port be blocked ?

View 3 Replies View Related

Cisco Firewall :: ASA 5510 Blocking Port 25?

Dec 13, 2010

I have a Cisco ASA 5510. I have detected an infected workstation on my internal LAN which has caused my IP to be blacklisted by Barracuda Networks and other RBL. I have scanned and cleaned the workstation removing the spambot. I want to prevent all my internal workstations from sending SMTP traffic on Port 25 through my ASA 5510 device. I only need to allow my Exchange Server access to send out traffic on port 25. configure this setup using ASDM 5.0?  I know it may be easier using CLI, but using the ASDM would really be preferred.

View 4 Replies View Related

Cisco Firewall :: ASA 5505 Blocking FTP Port

Nov 28, 2011

I am working on an ASA5505 and am trying to open the ftp port. I have a server (192.168.10.202) on the local LAN which is attempting to download antivirus updates from the net via ftp.  
 
Saved
:
ASA Version 8.3(2)
!
hostname SITE
enable password XXXXXX
passwd XXXXXX
names

[code]....

View 4 Replies View Related

Cisco Firewall :: ASA 5505 Port Blocking?

Jun 24, 2012

I have an ASA 5505 running 8.4.I am only letting ICMP traffic in from the outside.As a test, I opened a couple of ports I need on the ASA.I cannot access these ports and I do not get a denied error in the log.
 
I contacted the ISP and they are not blocking these ports.I ran an online port scanner to check ports 1-100 as a test.  They all came up as blocked on the port scanner.  The only deny error I got on the ASA was for port 80.Is this normal behavior?  If so, how do I get it to show all of the deny errors so I know the traffic is at least hitting the firewall?

View 2 Replies View Related

Cisco Switching/Routing :: 3825 ISR - Traffic Route From Switch Port To Router Port

Jun 5, 2013

I'm fairly new to Cisco products am in the process of developing my network knowledge on a deeper level.  I have a 3825 with a HWIC-4ESW and I'm struggling to fully understand how the two "see" each other.  I've setup a V LAN with a layer 3 address on the HWIC and added the switch ports to it.  This seemed to allow devices connected to the switch ports to talk to the built-in router ports.  I thought this was all making sense until i applied an access-list to the router port.  It's a simple ACL i'm just using for testing and the only thing it does is blocks telnet from anywhere.  I know the ACL is setup properly because if I connect a device directly to the router port i cannot telnet to the port.  However, if i connect a device to one of the switch ports, i am able to telnet to the router port successfully. 

It seems that I'm missing something with how traffic flows from the switch port to the router ports and how the two "see" each other. 

View 2 Replies View Related

Cisco Firewall :: ASA5505 Blocking Port 3101 For Blackberry Server

Oct 31, 2012

I thought I had the configuration to allow bi-directional traffic for my Blackberry server.  I have a second fw with the same config and it worked on that one.  But right now, my blackberry server is down, and all the users are upset.
 
ASA Version 8.2(2)
 !
 hostname asa5505

[Code]......

View 4 Replies View Related

Cisco Firewall :: ASA 5540 - Port Blocking For Voice In Transparent Mode

Dec 20, 2012

i am using asa5540 with 7.0(8). firewall was configured in transparent mode.
 
now i am looking for block ip phone communication from site to site and head office. i am using cucm 7.1.2b.
 
all site was connected through ofc. no nat was using.

View 1 Replies View Related

Cisco Switching/Routing :: 3750 - Blocking Selected ARP Broadcasts From Particular Trunk Port Via DAI

May 17, 2012

We  had a core switch (Cisco 4503), distribution switches(Cisco 3750) and access switches in our  network and consists of many vlans. Almost all vlans uses DHCP Pools.  But for few vlans DHCP is not yet configured due to initial design poblems. Recently one of the rogue  user in vlan 1 connected to one of the access switch send rogue arp packets to the network (suspecting arp packet with interface vlan 1 ip of core switch with wrong mac-address (gateway ip of vlan 1)) and resulted in a prolonged network outage for the vlan 1.  Any way we are going to seggregate vlan 1 into different vlans, but  before that we need a temporary plan to block such kinds of attack like enabling DAI in the switch. I have checked the DAI implemenation feasibility with my knowledge and found that it is not possible to configure to the access switches(Cisco 2960) in which the user directly connected. But found that Distribution switch connected to that particular access switch seems to be able to configure since DAI commands are available to configure in switch.
 
Is it possible to block ARP packets with the interface vlan 1 IP Address with rogue mac-address by configuring DAI in the above mentioned Distribution switch and the port connected to the mentioned access switch?

View 2 Replies View Related

New TP-Link Router Blocking Application?

Jun 9, 2011

I just installed a TP-Link router. Everything (almost) works: PC internet, laptops internet, email, etc. An application on my PC can't communicate through the router to the internet server now. I am sure it is a port/IP address issue. But I am unable to figure out a solution. I have already changed the IP (of the computer with Windows 7) to a static IP address. I guess now I need to get the port access done. I know the ports in question from calling the vendor. I just need to get the application through the router.

View 1 Replies View Related

D-Link DIR-825 :: Blocking Access To Website?

Apr 20, 2013

For the last week, I haven't been able to access my banking web site (Royal Bank in Canada).  It doesn't matter which browser (FireFox, IE, Chrome) or computer (desktop, laptop) or even my cell (on WiFi).It must be the router (DIR-825, HW-B1, FW-2.07NA) since I can connect to the web site fine if I connect straight to the modem.  (Also, if I turn off WiFi on my cell, I can connect to their web site but once I turn WiFi back on, it wont connect).I tried restoring to factory settings but that didn't work.I tried some of the suggestions here: http:[url].....

- Turn off ALL QoS or Disable Traffic Shaping. Advanced/QoS.

- Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual.

- Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking

- Ensure devices are set to auto obtain an IP address.

- Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.

- Enable uPnP and Multi-cast Streaming under Advanced/Networking.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved