Outlook Or Google Earth / Talk Does Not Work Properly?

Nov 12, 2011

I have a new Lenovo Ideapad laptop and Im having problems connecting to internet using ethernet cable. The thing is this problem occurs only at one particular place (dorms) because Im having no internet problems at other locations.

It looks like this: I connect using ethernet cable, Windows 7 identifies the network and everything looks normal, but there is no internet when I open a browser (I tried IE, Firefox and Chrome). It just loads and loads and sometimes it loads my Google homepage, but only after approximately 30 seconds or it does not load it at all. The same applies for other pages - they do not load or they load after a minute, but the pages are incomplete, they look like HTML

When I do a ping at CMD, it shows the same problem, the replies are slow or it shows "request timed out". I tried pinging various pages or IPs with same results. The only thing Im able to ping normally is the IP of my network adapter. My IPv4 is set to automatic, but I also tried manual parametres, just in case.I tried 3 different cables, switching antivirus and frewall off, did spyware search, switching IPv6 off, switching WiFi off, reseting the main dorm router etc etc...

Strange thing is that my laptop works perfectly anywhere else (home, work...) so I suppose there is no problem with the configuration of my laptop or network adapter, BUT the internet provider says there is no problem with their network or router since other laptops works normally at THAT location (even my other laptop does work there), so mine Lenovo is the only laptop which is having problems... and when I check the properties of the network, upload is always higher than download, but generally both are very small one more strange thing: I can watch live stream videos using one particular software and I can download torrents quite normally, but loading Google and other pages is a major problem, even Outlook or Google Earth/Talk does not work properly

View 16 Replies


ADVERTISEMENT

Get Details Of Any Destination Location Through Google Earth

Mar 31, 2011

how to get details of any destination location through google earth?

View 4 Replies View Related

D-Link DIR-655 :: Blocking Traffic On Port 80 Except For Google Earth

Mar 29, 2012

I've blocked all traffic on port 80 (Advanced-Access Control- Apply Advanced Port Filter- All IP range and Port 80 selected) to avoid any kind of Web Access. I won't use Web Filter because there are too many URLs to be blocked.

However I have a problem to keep Google Earth working, since it uses port 80.

Is there a way to keep Google Earth working, even blocking traffic on Port 80? I've tried configuring an application rule to let Google Earth working, but it didn't work (it seems that I can not create an exception for Filter Port) .

View 9 Replies View Related

Talk Talk Router - Connection Is Suffering Idle Timeouts Daily

May 21, 2012

I've got an aol engineer visiting Thurs.to examine connection loss (since last Weds). But I'm convinced the problem is with the router. But from the tone of the aol tech questions I suspect he's already briefed his engineer to do his best to represent the problem as being either with my computer or positioning of router/filters/condition of wall-sockets - usual getouts.The talktalk router is neww, issued Feb 12, after my original router, speedtouch, started suffering idle timeouts every day.

View 3 Replies View Related

Atheros AR5007EG TO Talk Talk Echolife Hg520b Router

Feb 20, 2011

I can connect to this router via Lan and have no problems.Via Wi Fi it connects but will not communicate with the router or see find the router vias ip address..I have turned on auto ip finding in network settings for Lan and for Wireless but wi fi still does not allow access to internet. It just says local only.when i go to Command prompt and do ipconfig /all it says all DHCP enabled are off!!

View 1 Replies View Related

Return To Work And IT Changed Outlook And Windows Password?

May 2, 2011

I returned to work and found a note that my Outlook and Windows password had been changed during the night by the IT department. Why would they need to change my password? Are they monitoring my work somehow.

View 1 Replies View Related

Why Won't Google Internet TV Work With 4G With Wireless Card

Jul 21, 2012

I have new google internet TV. It seems to only work if connected to an ethernet line directly vs my 4G wifi card.

View 1 Replies View Related

Cannot Connect To MSi Talk Talk Router

Dec 21, 2011

i am having trouble connecting my msi laptop to my talktalk to router i have another laptop that i cant really use however i turned it on to c if i can connect it to internet and i can but can not not matter what i do connect this one.

View 4 Replies View Related

VPN Doesn't Work Properly?

Jan 11, 2011

I have an problem with VPN connection on notebooks. Sometimes the VPN connection works perfectly, and other times it just doesn't work at all.The Cisco VPN client software is version 5.0.04.0300. Operating system is Windows XP Prof SP2.When the connection fails, the client statistics window shows "Bytes Received: 0".Rebooting the system, has no effect

View 1 Replies View Related

Inbound Calls Do Not Work Properly

Dec 1, 2012

I'm a new user of VOIP. My network connect is Cable modem -> router (Dir 615) -> ATA (SPA122) . Outbound calls have no problem. But inbound calls sometimes work, sometimes not ( got message: not in service)

View 1 Replies View Related

Internet Doesn't Work Properly?

May 22, 2012

The electric went off in my house about an hour ago, causing my computer to turn off as a result. Ever since, the internet on my PC has been acting up.

My internet was working perfectly before the power cut both on my laptop (my mum was using it at the time) and PC, however, while I've got no problems with the internet on the laptop, my PC keeps losing the connection to a ridiculous degree. It'll drop the connection for over a minute at a time, come back on literally long enough for me to refresh/load 1 webpage (~5 seconds), then go back off again for another minute or two.

All the lights on the router are on and I've even cross-referenced (lacking a better term...) the internet connection between my lap top and desk top and my laptop will work fine when my PC is telling me there's no connection and nothing will load on it. It seems to me that something has happened to my desktop when the power went out but I have no idea where to begin to even try to find out what's wrong.

I've tried turning off the router by both the wall and the little button on the back of it, and I've restarted my PC twice as well and still the internet doesn't work properly. My laptop picked up the connection as soon as the router came back on with no problem but my desktop struggled to find the connection and only picked it up after turning the router off twice aand restarting the computer twice as well and as I said, when it finally did find the connection it just keeps dropping it.

View 3 Replies View Related

D-Link DIR-825 :: Can't Get VOIP ATA To Work Properly

Aug 18, 2012

I can't get my VOIP ATA (linksys SPA-2102) to work properly with the shiny new DIR-835. I updated the firmware to 1.02 and messed around with various settings but it just won't work. Well, I can get registered and everything looks ok but, when I receive a call, the person at the other end can't hear me. I can hear them fine, but they can't hear me. I don't have any problem when I call someone. Still, it is frustrating. The problem persist even though I put the ATA in the DMZ.

View 3 Replies View Related

Inspiron M5030 Wireless Adapter Does Not Work Properly?

Dec 1, 2012

I'm working on an M5030 that has a red X on the wireless and will not find any networks.

- The ethernet connection WORKS

- The fn+f2 wireless switch combo seems to do nothing

- I've updated the bios

- I've uninstalled and installed the latest driver

- I've installed external USB wireless adapter but it has same issue

- I've scanned for malware, all clean.

When I go to network adapters it has signal bars on the wireless adapter but when I right click -> connect disconnect -> nothing shows as available. If I diagnose, it just says there may be a problem with the wireless adapter. I've tried DISABLING ZoneAlarm firewall to no avail also.

View 7 Replies View Related

Belkin Routers :: Will F5d8236-4 Work Properly With Windows 7

Nov 29, 2012

I have several laptops that work fine with my wireless router. I have a new laptop with Windows7 and it will not stay connected for more than a couple of minutes at a time. Are there any issues with this router and Windows7?

View 1 Replies View Related

Dell :: N5010 Network Drivers Did Not Work Properly

Dec 27, 2011

I have an inspiron N 5010 laptop. It didn't have any software with it, just a DOS operating system. So I downloaded all its drivers here on website.Some of its Network drivers did not work properly though.

Now I purchased a wireless modem and everybody can find its network on their utilities, but me!

So I guess it's a software problem. How I can download a proper working software for my laptop, because I checked my system information and  there is no adapter in its network part.

View 6 Replies View Related

Dell :: Wireless 1704 In Inspiron 5520 Doesn't Work Properly

Nov 23, 2012

it keeps disconnecting and ping breaks all the time.other laptop and phones work fine.and if i go 5-10 meters away from router it gets worse.tried new drivers and bios.even tried to change settings of wireless card still problem is there.

View 5 Replies View Related

Linksys Wireless Router :: E4200 Getting DHCP Reservation To Work Properly With Windows 7 Machine

Jun 7, 2011

I have the e4200 and I am having trouble getting DHCP reservation to work properly with my Windows 7 machines. Perhaps there is a step that I am missing. Basically I go to the DHCP reservation setup page, select my machine and add it to the reservation table. Then I save the changes. As soon as I do this my computer goes offline. If I reboot my machine, it is still offline. I've tried the same procedure to reserve the IP address for my phone and it works fine so I wonder if the problem is with Win7.

View 6 Replies View Related

Linksys Wireless Adapters :: WUSB600N Doesn't Work Properly And Fails To Connect Network

Feb 28, 2011

I have the WUSB600N wireless adapter, and I'm using it with Windows 7 Ultimate 64bit. I'm using the latest driver available, 3.0.10.0. When Windows first starts, the adapter is not working properly and fails to connect to any networks, no matter how long I wait. If I unplug it and plug it back in after Windows is already running, I do not have this issue. This also does not occur when "restarting" the machine; only when turning the machine off and then back on.

View 2 Replies View Related

D-Link DIR-655 :: Internet Earth Icon Flashing Forever?

Jan 4, 2011

I read somewhere this is to show that the connection is unstable? My modem works fine, and it works fine being plugged directly into my PC.

But going through the modem, I am noticing some drops in speed and spikes of high latency. This icon - the little earth/internet icon - has never flashed for a long period of time before. I've power cycled it (unplugged for over 5 mins) and it persists.

Does it need a firmware upgrade? Is it something I did? Faulty hardware?

View 4 Replies View Related

Broadband :: How To Talk On Home Phone

Feb 8, 2012

I want to connect my home phone to the pc and make aqlls through voip. I do not want to use the headphone as it is not good to be used in the office.Or if I have a modem, can that be converted to make voip calls on a pc?

View 2 Replies View Related

Cisco :: Avaya Phone Won't Talk With Server?

Apr 17, 2013

When I place the phone on a different subnet, registration failed. The connectivity between the two subnet should be working because I have a desktop computer hook up behind the Avaya phone and the computer can talk with the server without problemThe phone has gotten the IP from DHCP server can I can even ping the IP from phone server. but on the phone it shows "Discover 10.0.10.10" then reboot, again and again. 10.0.10.10 is the IP of phone server. And there is no firewall rules blocking the traffic between the two subnet.Like I said before, if I place the phone on the same subnet as the server it worked. The setting of the switch remain unchanged

View 3 Replies View Related

Cisco :: ASA 5505 DMZ Do Not Talk To Inside Network

Jul 29, 2011

I have a 5505 with the security plus license. I have a web server in the DMZ that needs to talk with a server on the inside network but it doesn't seem to be able to. Im guessing there is something I need to do to enable the DMZ to talk to the inside network.

Here is the config.

[code]...

View 1 Replies View Related

D-Link DAP-1522 :: Do Devices Talk Directly

Apr 14, 2013

Do the devices connected to the DAP-1522 communicate directly with each other or do they communicate through the router.My DAP-1522 is set up as a bridge connected to my DIR-825.  The reason I ask is I've set up an HTPC connected to the DAP-1522 and I also have media devices connected to the DAP and am wondering if they'll communicate with each other directly or if they have do it by going to the router and back.  That way I can use my HTPC to serve media to my devices at local speeds.

View 1 Replies View Related

Cisco Wireless :: Getting 3500 AP To Talk To WLC 2100

Jul 18, 2012

I am trying to config my wireless lan controller (WLC) 2106 to discover my new 3500 access points.I followed the example Cisco configuration doc.69719.I am using a Cisco 3760 switch to interconnect the AP and WLC.I set up DHCP in the switch. [code]

View 6 Replies View Related

Cisco Wireless :: Clients On 1131AG Cannot Talk To Each Other

Jul 27, 2012

I have a dozen clients on an 1131AG and they cannot ping each other.  I get a reply but it says destination host unreachable.

View 4 Replies View Related

Cisco WAN :: Allow To NAT'ed Hosts To Talk Via External IP Using ASA 5520

Aug 30, 2011

I have two hosts behind an ASA on a private network.  Both hosts are NAT'ed (each has a unique public IP).  I need Host A to be able to talk to Host B through their respective external IP's.

View 5 Replies View Related

Cisco 800 / Sonicwall Tz170 - Allow Two Networks To Talk?

Jan 11, 2012

I have my modem then a switch, and two gateways a Cisco 800, and a sonicwall tz170.The Cisco isn't managed by me, it's on a 172.18.2.x subnet and I only have about 12 addressable IPs.I manage the sonicwall and have all 254 addresses open. The computers have to stay behind the Cisco because it connects to a VPN that the line of business software uses.

I can't connect the two gateways by VPN because I cant control the Cisco.How can I get these two to talk? I have a new server on the sonicwall network and an old server on the Cisco network. I want the computers to be able to see both servers

View 13 Replies View Related

Cisco Routers :: Make 2 Different Subnet Talk In LAN Via Rvs4000?

Nov 18, 2012

I have 2 sites located 500 meters away and i connect it via 2 x RVS4000. I managed to get the site to site VPN up Via internet and from my network 192.168.1.x able to reach 192.168.2.x. -where 192.168.1.100 (user try to acces my FTP server 192.168.2.99) has no issues but it's slow due to my internet connection speed.
 
So i setup another link via wireless( wireless bridge ) purpose is to resolve slow connection via internet.
 
But some how i try to set traffics divertion from 192.168.1.x to 192.168.2.99 via local LAN faild.

how possible to setup the network such as picture attached with RVS4000?

View 3 Replies View Related

Cisco Infrastructure :: How Router Can Talk With AS400 Using SDLC

Mar 23, 2011

to ask a very legacy network technology -  IBM's SNA how it working on TCP.The topology as shown at the attachment  SNA topology.png (backgroup is banking sector)

1. At HQ, AS400 mainframe physically connect to router (with SNA feature license). This router connect to peer router across WAN (for security purpose, built the IPSec tunnel with 3DES encryption).
2. HOW really the router can do SNA ov IP?  how the router can talk with AS400 using SDLC, and then route through using TCP/IP?
3. read on cisco documentation, i just couldn't know what kind of scenario need to use STUN? as well as DLSW+ ? can please guide when to use either STUN or DLSW+?

View 1 Replies View Related

Connect 2 Dlink Dir615 Routers In Client Mode To Talk?

Mar 14, 2011

Okay so for the past week i have battled with my two routers trying to make them talk to each otherMy main router (router A) is a dlink dir-615 ver. BMy second router (router b) that im trying to make talk to router A is a dlink router dir-615 ver E1 flashed with dd-wrt custom firmware.I have looked at every setup guide people have posted online and youtube videos to no avail

View 6 Replies View Related

Linksys Wireless Router :: E900 Cannot Get To Talk To HP Office 8500A Plus

Jul 10, 2012

I just got the Cisco E900 router and installed it but I cannot get it to talk to my HP Office Por 8500A Plus.

View 3 Replies View Related

Linksys Wireless Adapters :: Wusb54GS Ver2 Adapter And N / M Can't Talk

Nov 23, 2012

As titled have older linksys USB wifi adapter but Network magic wont add because 'other software' controlling adapter. Picked up a Dlink adapter dwa-131 usb wifi adapter but same issue, software conflict?Ive added several computers and laptops, different operating systems. Ipad, Ipod, blueRay, printer with no issues. But this USB wifi adapter has me completly stumped. This cant be this hard...dense I can be but... Is there a way simply that Im not seeing, adding a computer using a USB wifi adapter to my network thats compatible with NM?? Computer is an older Dell 8200 with XP sp3. I contacted support but maybe because my question was related to NM response was  basically "your question was 'too technical call xxxxxxxx" -

View 2 Replies View Related

Cisco Firewall :: ASA 5510 Cannot Talk To Remote Networks Connected

Mar 20, 2012

We have an inside interface, 192.168.10.0/23We have an outside interface, public ip...We have the ASA connected to 5 site to sites, this is working fine and through the internal interface can access all remote sites and vice vera. These are 192.168.20.0/24, 192.168.30.0/24, 192.168.40.0/24, 192.168.50.0/24 and 192.168.60.0/24,When a user connects via Cisco VPN Client they can see the inside network but can't talk to the remote networks connected, for instance 192.168.40.0/24... whereas an internal user can. I understand that the VPN client connection is seen as an outside connection, not an inside connection... but then I read [URL] and I am confused even more.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved