Talk Talk Router - Connection Is Suffering Idle Timeouts Daily
May 21, 2012
I've got an aol engineer visiting Thurs.to examine connection loss (since last Weds). But I'm convinced the problem is with the router. But from the tone of the aol tech questions I suspect he's already briefed his engineer to do his best to represent the problem as being either with my computer or positioning of router/filters/condition of wall-sockets - usual getouts.The talktalk router is neww, issued Feb 12, after my original router, speedtouch, started suffering idle timeouts every day.
View 3 Replies
ADVERTISEMENT
Feb 20, 2011
I can connect to this router via Lan and have no problems.Via Wi Fi it connects but will not communicate with the router or see find the router vias ip address..I have turned on auto ip finding in network settings for Lan and for Wireless but wi fi still does not allow access to internet. It just says local only.when i go to Command prompt and do ipconfig /all it says all DHCP enabled are off!!
View 1 Replies
View Related
Dec 21, 2011
i am having trouble connecting my msi laptop to my talktalk to router i have another laptop that i cant really use however i turned it on to c if i can connect it to internet and i can but can not not matter what i do connect this one.
View 4 Replies
View Related
Mar 23, 2011
to ask a very legacy network technology - IBM's SNA how it working on TCP.The topology as shown at the attachment SNA topology.png (backgroup is banking sector)
1. At HQ, AS400 mainframe physically connect to router (with SNA feature license). This router connect to peer router across WAN (for security purpose, built the IPSec tunnel with 3DES encryption).
2. HOW really the router can do SNA ov IP? how the router can talk with AS400 using SDLC, and then route through using TCP/IP?
3. read on cisco documentation, i just couldn't know what kind of scenario need to use STUN? as well as DLSW+ ? can please guide when to use either STUN or DLSW+?
View 1 Replies
View Related
Jul 10, 2012
I just got the Cisco E900 router and installed it but I cannot get it to talk to my HP Office Por 8500A Plus.
View 3 Replies
View Related
Feb 8, 2012
I want to connect my home phone to the pc and make aqlls through voip. I do not want to use the headphone as it is not good to be used in the office.Or if I have a modem, can that be converted to make voip calls on a pc?
View 2 Replies
View Related
Apr 17, 2013
When I place the phone on a different subnet, registration failed. The connectivity between the two subnet should be working because I have a desktop computer hook up behind the Avaya phone and the computer can talk with the server without problemThe phone has gotten the IP from DHCP server can I can even ping the IP from phone server. but on the phone it shows "Discover 10.0.10.10" then reboot, again and again. 10.0.10.10 is the IP of phone server. And there is no firewall rules blocking the traffic between the two subnet.Like I said before, if I place the phone on the same subnet as the server it worked. The setting of the switch remain unchanged
View 3 Replies
View Related
Jul 29, 2011
I have a 5505 with the security plus license. I have a web server in the DMZ that needs to talk with a server on the inside network but it doesn't seem to be able to. Im guessing there is something I need to do to enable the DMZ to talk to the inside network.
Here is the config.
[code]...
View 1 Replies
View Related
Apr 14, 2013
Do the devices connected to the DAP-1522 communicate directly with each other or do they communicate through the router.My DAP-1522 is set up as a bridge connected to my DIR-825. The reason I ask is I've set up an HTPC connected to the DAP-1522 and I also have media devices connected to the DAP and am wondering if they'll communicate with each other directly or if they have do it by going to the router and back. That way I can use my HTPC to serve media to my devices at local speeds.
View 1 Replies
View Related
Jul 18, 2012
I am trying to config my wireless lan controller (WLC) 2106 to discover my new 3500 access points.I followed the example Cisco configuration doc.69719.I am using a Cisco 3760 switch to interconnect the AP and WLC.I set up DHCP in the switch. [code]
View 6 Replies
View Related
Jul 27, 2012
I have a dozen clients on an 1131AG and they cannot ping each other. I get a reply but it says destination host unreachable.
View 4 Replies
View Related
Aug 30, 2011
I have two hosts behind an ASA on a private network. Both hosts are NAT'ed (each has a unique public IP). I need Host A to be able to talk to Host B through their respective external IP's.
View 5 Replies
View Related
Jan 11, 2012
I have my modem then a switch, and two gateways a Cisco 800, and a sonicwall tz170.The Cisco isn't managed by me, it's on a 172.18.2.x subnet and I only have about 12 addressable IPs.I manage the sonicwall and have all 254 addresses open. The computers have to stay behind the Cisco because it connects to a VPN that the line of business software uses.
I can't connect the two gateways by VPN because I cant control the Cisco.How can I get these two to talk? I have a new server on the sonicwall network and an old server on the Cisco network. I want the computers to be able to see both servers
View 13 Replies
View Related
Nov 12, 2011
I have a new Lenovo Ideapad laptop and Im having problems connecting to internet using ethernet cable. The thing is this problem occurs only at one particular place (dorms) because Im having no internet problems at other locations.
It looks like this: I connect using ethernet cable, Windows 7 identifies the network and everything looks normal, but there is no internet when I open a browser (I tried IE, Firefox and Chrome). It just loads and loads and sometimes it loads my Google homepage, but only after approximately 30 seconds or it does not load it at all. The same applies for other pages - they do not load or they load after a minute, but the pages are incomplete, they look like HTML
When I do a ping at CMD, it shows the same problem, the replies are slow or it shows "request timed out". I tried pinging various pages or IPs with same results. The only thing Im able to ping normally is the IP of my network adapter. My IPv4 is set to automatic, but I also tried manual parametres, just in case.I tried 3 different cables, switching antivirus and frewall off, did spyware search, switching IPv6 off, switching WiFi off, reseting the main dorm router etc etc...
Strange thing is that my laptop works perfectly anywhere else (home, work...) so I suppose there is no problem with the configuration of my laptop or network adapter, BUT the internet provider says there is no problem with their network or router since other laptops works normally at THAT location (even my other laptop does work there), so mine Lenovo is the only laptop which is having problems... and when I check the properties of the network, upload is always higher than download, but generally both are very small one more strange thing: I can watch live stream videos using one particular software and I can download torrents quite normally, but loading Google and other pages is a major problem, even Outlook or Google Earth/Talk does not work properly
View 16 Replies
View Related
Nov 18, 2012
I have 2 sites located 500 meters away and i connect it via 2 x RVS4000. I managed to get the site to site VPN up Via internet and from my network 192.168.1.x able to reach 192.168.2.x. -where 192.168.1.100 (user try to acces my FTP server 192.168.2.99) has no issues but it's slow due to my internet connection speed.
So i setup another link via wireless( wireless bridge ) purpose is to resolve slow connection via internet.
But some how i try to set traffics divertion from 192.168.1.x to 192.168.2.99 via local LAN faild.
how possible to setup the network such as picture attached with RVS4000?
View 3 Replies
View Related
Mar 14, 2011
Okay so for the past week i have battled with my two routers trying to make them talk to each otherMy main router (router A) is a dlink dir-615 ver. BMy second router (router b) that im trying to make talk to router A is a dlink router dir-615 ver E1 flashed with dd-wrt custom firmware.I have looked at every setup guide people have posted online and youtube videos to no avail
View 6 Replies
View Related
Nov 23, 2012
As titled have older linksys USB wifi adapter but Network magic wont add because 'other software' controlling adapter. Picked up a Dlink adapter dwa-131 usb wifi adapter but same issue, software conflict?Ive added several computers and laptops, different operating systems. Ipad, Ipod, blueRay, printer with no issues. But this USB wifi adapter has me completly stumped. This cant be this hard...dense I can be but... Is there a way simply that Im not seeing, adding a computer using a USB wifi adapter to my network thats compatible with NM?? Computer is an older Dell 8200 with XP sp3. I contacted support but maybe because my question was related to NM response was basically "your question was 'too technical call xxxxxxxx" -
View 2 Replies
View Related
Mar 20, 2012
We have an inside interface, 192.168.10.0/23We have an outside interface, public ip...We have the ASA connected to 5 site to sites, this is working fine and through the internal interface can access all remote sites and vice vera. These are 192.168.20.0/24, 192.168.30.0/24, 192.168.40.0/24, 192.168.50.0/24 and 192.168.60.0/24,When a user connects via Cisco VPN Client they can see the inside network but can't talk to the remote networks connected, for instance 192.168.40.0/24... whereas an internal user can. I understand that the VPN client connection is seen as an outside connection, not an inside connection... but then I read [URL] and I am confused even more.
View 8 Replies
View Related
Jun 18, 2012
I was assigned a task to configure an SG300-28P to have 3 different vlans.Now on VLAN1 their will be only one device configured with static IP 192.168.0.230,On the other 2 VLANS there will be a separate router connected on each one of them and will also act as a DHCP server.
View 4 Replies
View Related
Mar 8, 2011
I have setup two different subnet 192.168.1.0 and 192.168.2.0 on the same 'inside' interface. They are unable talking to each other. I can ping from firewall to both subnet. Both side unable talking to each other unless I add route on the both side systems.I have added the followings in ASA5510. [code]
View 8 Replies
View Related
Nov 9, 2011
I'm trying to get a couple clients to talk to my Active Directory servers. I've created sub-interfaces on my ASA. So, my clients are on Gi0/1.139 and my two Active Directory servers are on Gi0/1.132. I've enabled traffic on TCP 53-5000 port range according to Microsoft. My clients still can't join the domain. What ports I need to open up? My AD servers are Windows 2003.
View 1 Replies
View Related
Sep 11, 2011
I have a c3560 that on Port 1 I can not get any device to talk to the DHCP server.Previously there was a client connected to this port however over the weekend he stated he lost connectivity.
In my troubleshooting I have connected that client to another port and now he is good to go...I connected my laptop and tried to connect to the network however I could not.I checked the logs and did not see anything that lead me to think it was having problems.
Is there another way to shut this down and hopefully start it back up without having to restart the entire switch?
View 4 Replies
View Related
Mar 27, 2012
I have purchased these two switches from ebay as a test lab, I plan to connect them up via a gigastack modulecable and enable ip routing on the c3550 and vlans to talk to each other.
I'm very much a procurve person and really need to get into the cisco switching.I will want to trunklacp between the switches - whats the process is setting that up on cisco switches?
View 1 Replies
View Related
Aug 26, 2012
I have the latest version firmware
I am constantly getting dropped and timeouts accross all of my devices this has been hapening for several months now I think ever since I upgraded to 1.0.04
It says no internet access when the wired computers have it fine. Android phones, windows 7 pc, and chromebook.
View 6 Replies
View Related
Oct 9, 2011
So I recently purchased an E4200 to replace my aging and slightly ailing DLink DIR-655 which as served me well for going on 5 years. The part of the DLink that was giving me the issues was the wireless, the routing and switching worked fine however.
I do quite a lot of streaming of media from my home machine outside my network through the internet. Most recently I've been using Kalemsoft Media Streamer on my HP Touchpad, however I've used Zumocast, Windows Live, Splashtop, and a few others. I havent yet tried my PPTP VPN through the router for an extended period of time to see if it reflects this issue as well though.
Since replacing my 655 with the E4200 I've started experiencing a timeout issue. It seems to be semi-consistant and only happens after time of unuse or extended use (I havent timed it yet to see if it always happens after the same amount of time though).
Basically what occurs is this:
I'll be watching some video or listening to audio streaming from my machine and after a period of time (usually a long period of time) it'll suddenly lose connection, requiring me to re-connect through the software, like the NAT translation is timing out or something.
How it USED to work is this: It'd basically work until I stopped streaming.
My setup:
AT&T Uverse set to DMZPlus aiming towards my E4200 WAN port (sitting directly in place of the 655 I used to have)
All machines on the network are gigabit. I have ports 7000 and 7001 open for Kalemsoft Media Streamer on the E4200 per the specifications of the software.
The software understands UPnP so I have nothing specific forwarded on my machine, but I didnt previously either.
View 4 Replies
View Related
Jan 1, 2013
I recently replaced an old Linksys with a Cisco E3200. All our devices get "stuck" periodically and can connect to the E3200 but not the internet. We power cycle the E3200 and all is fine. But only for a period of time, then we need to power cycle again. The range is less than my 4 year old Linksys was also, devices maybe 30 feet lose their connection even more quickly, forcing more frequent power cycling.
View 2 Replies
View Related
Nov 30, 2012
My macbook keeps loosing it's wireless connection after being idle, when I start up I have to find my router and highlight it and connect and if it's idle it losers it's connection all the time.I tried resetting the router to default and started over I also tried every imaginable way of saving my password and connection but I can't find a way I've been into the routers security,trouble shooting,wireless, what's not holding it's connection to my MACBOOK? my iphone 5, ipad, and roku all hold
View 2 Replies
View Related
Dec 18, 2011
We're getting "Connaction Timeout / Connection Failure" error messages several time per day. Here is our setup:
Verizon FiOS Internet (ONT Box) --> Cisco ASA 5505 --> EdgeMarc 4500 Router --> Cisco 300-24G Switch --> Dell PE1950 Servers
From past few months, we keep getting Connection Timeout and Connection Failure error messages in our vendor application which connects to SQL Server 2005. Also Terminal Server 2003 keep disconnecting for every few hours.After several days of troubleshooting, we come to know that this Cisco ASA 5500 is not working properly. When I access the ASDM, it shows several warning messages.I know there is a setting option to configure TimeOut, but is there anyway to test and track the ASA 5500 regarding this Timeout issues?
View 3 Replies
View Related
Feb 15, 2011
We recently got a 10 meg dedicated internet fiber connection installed. I connected it to a PIX 501 firewall and everything worked fine (I tested it for a couple of weeks). A couple of days ago I got a new ASA 5505 and replaced the PIX with this device. It works, but every so often there seems to be a timeout when surfing the web whereby I click on a link and there is up to a 45 second wait and then the page loads quickly. I was not getting this before on the PIX so I'm assuming it's not a latency issue with the connection. I am the only one using this connection on the network so it's not to say that it's being bogged down. I want to roll this out to the other users on the network but not when this is happening. The configuration is below:
: Saved
:
ASA Version 8.2(1)
!
hostname ciscoasa
[Code].....
View 8 Replies
View Related
Aug 28, 2012
I got a Problem on a customer which is using a Failover ASA 5510 pair with SSM-CSC-10-K9 modules.The clients have to connect to a webserver where they are doing some calculations.If they prepare everything and want to calculate everything what takes a couple of time the session is after about 3 minutes timedout.My first idea was to set session specific timeouts which are a bit longer then the normal but this setting did not work. I created a policy which did not work for me. How to set connection specific timeout's? [code]
View 3 Replies
View Related
Feb 22, 2012
LAN connection gets disabled by itself on idle. Sometimes BSODs.A few days ago I tried connecting a MBlaze modem to my laptop (Windows 7 Ultimate 32 bit) to access internet. But it resulted in instant BSOD everytime.I deleted the modem software after that & didn't try to connect it again.But now, whenever I connect using my LAN broadband, connection works fine as long as I am continuously browsing something. But as soon as I stop browsing and it goes in idle mode in about 10-15 minutes, the connection gets disconnected. In the adapter properties, it shows that the driver is working properly. If I try to disable or uninstall it it doesn't give a response. The only solution to this is a forced shutdown & restart, after which it works fine untill not idle. I am not able to download anything because of this.I tried many things like reinstalling the network adapter driver, unchecking the power management feature, resetting the connection, etc. but nothing is working.
View 5 Replies
View Related
Mar 3, 2011
I recently started having trouble with my VPN clients loosing connection.I can create the conenction, work with it for a while, and then loose connectivity.Timing seems to be dependent on the activity over the connection.More activity, the conenction stops working sooner.
The cleint doesn't disconnect, I just can't access anything from the client.Disconnecting and reconnecting the client fixes the problem, temporarily depending on how much data I'm transferring.This works 90% of the time.The other 10% if I wait 30-45 minutes, and try again.. It works...with the same results...
It was originally isolated to a Win 2003 server that I was using as the client.It is now happening on my Win XP client as well.I'm using the AnyConnect client ver. 2.5.2014 with the VPN service on the UC520.Which I beleive, is similar to the ASA 5500 series VPN device.I am running ver 8.1.0 on the UC 520, and I can't remember if this started after upgrading to the new software.
View 2 Replies
View Related
Jul 10, 2012
We are using the cisco sa540 router and shrew VPN to connect to our buiness network, mostly to connect to the workstations with RDP. Now we wonder if it posible that the connection will disconnect automaticly after an idle time of for example 30 minutes. And if so, how can i configure it?
View 4 Replies
View Related
