I can connect to this router via Lan and have no problems.Via Wi Fi it connects but will not communicate with the router or see find the router vias ip address..I have turned on auto ip finding in network settings for Lan and for Wireless but wi fi still does not allow access to internet. It just says local only.when i go to Command prompt and do ipconfig /all it says all DHCP enabled are off!!
View 1 RepliesI've got an aol engineer visiting Thurs.to examine connection loss (since last Weds). But I'm convinced the problem is with the router. But from the tone of the aol tech questions I suspect he's already briefed his engineer to do his best to represent the problem as being either with my computer or positioning of router/filters/condition of wall-sockets - usual getouts.The talktalk router is neww, issued Feb 12, after my original router, speedtouch, started suffering idle timeouts every day.
View 3 Replies View Relatedi am having trouble connecting my msi laptop to my talktalk to router i have another laptop that i cant really use however i turned it on to c if i can connect it to internet and i can but can not not matter what i do connect this one.
View 4 Replies View Relatedi got the echolife HG520b with this weird problem that's bugging me a lot nowadays which is disconnection. The internet light bulb always go off and the internet cuts every 5-10 minutes. I've tried to reboot with factory settings but it didn't work.
View 6 Replies View Relatedto ask a very legacy network technology - IBM's SNA how it working on TCP.The topology as shown at the attachment SNA topology.png (backgroup is banking sector)
1. At HQ, AS400 mainframe physically connect to router (with SNA feature license). This router connect to peer router across WAN (for security purpose, built the IPSec tunnel with 3DES encryption).
2. HOW really the router can do SNA ov IP? how the router can talk with AS400 using SDLC, and then route through using TCP/IP?
3. read on cisco documentation, i just couldn't know what kind of scenario need to use STUN? as well as DLSW+ ? can please guide when to use either STUN or DLSW+?
I just got the Cisco E900 router and installed it but I cannot get it to talk to my HP Office Por 8500A Plus.
View 3 Replies View RelatedI want to connect my home phone to the pc and make aqlls through voip. I do not want to use the headphone as it is not good to be used in the office.Or if I have a modem, can that be converted to make voip calls on a pc?
View 2 Replies View RelatedISP: Bigpond.com.au
TYPE: 3G/4G wireless
MODEM: Bigpond Ultimate Mobile Broadband Wi-Fi
(AKA: Sierra AirCard 753S)
SECURITY: Trend Titanium
Old Acer 5315 running Vista Home Basic has Atheros ar5007eg wireless card.Initially got ISP to setup, but failed with comment that Acers Empowering technology maybe interferring.I have updated the driver for wireless, I have uninstalled all components of Empowering Tech. reboot requested new info (key) but still fails to connect, DISPITE telling me its connected. Upon inspection of ISP properties it shows 0 recieved, 498kb sent.All puters previously ran old wireless (3G) modem OK.
Windows IP Configuration
Host Name . . . . . . . . . . . . : David-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
When I place the phone on a different subnet, registration failed. The connectivity between the two subnet should be working because I have a desktop computer hook up behind the Avaya phone and the computer can talk with the server without problemThe phone has gotten the IP from DHCP server can I can even ping the IP from phone server. but on the phone it shows "Discover 10.0.10.10" then reboot, again and again. 10.0.10.10 is the IP of phone server. And there is no firewall rules blocking the traffic between the two subnet.Like I said before, if I place the phone on the same subnet as the server it worked. The setting of the switch remain unchanged
View 3 Replies View RelatedI have a 5505 with the security plus license. I have a web server in the DMZ that needs to talk with a server on the inside network but it doesn't seem to be able to. Im guessing there is something I need to do to enable the DMZ to talk to the inside network.
Here is the config.
[code]...
Do the devices connected to the DAP-1522 communicate directly with each other or do they communicate through the router.My DAP-1522 is set up as a bridge connected to my DIR-825. The reason I ask is I've set up an HTPC connected to the DAP-1522 and I also have media devices connected to the DAP and am wondering if they'll communicate with each other directly or if they have do it by going to the router and back. That way I can use my HTPC to serve media to my devices at local speeds.
View 1 Replies View RelatedI am trying to config my wireless lan controller (WLC) 2106 to discover my new 3500 access points.I followed the example Cisco configuration doc.69719.I am using a Cisco 3760 switch to interconnect the AP and WLC.I set up DHCP in the switch. [code]
View 6 Replies View RelatedI have a dozen clients on an 1131AG and they cannot ping each other. I get a reply but it says destination host unreachable.
View 4 Replies View RelatedI have two hosts behind an ASA on a private network. Both hosts are NAT'ed (each has a unique public IP). I need Host A to be able to talk to Host B through their respective external IP's.
View 5 Replies View RelatedI have my modem then a switch, and two gateways a Cisco 800, and a sonicwall tz170.The Cisco isn't managed by me, it's on a 172.18.2.x subnet and I only have about 12 addressable IPs.I manage the sonicwall and have all 254 addresses open. The computers have to stay behind the Cisco because it connects to a VPN that the line of business software uses.
I can't connect the two gateways by VPN because I cant control the Cisco.How can I get these two to talk? I have a new server on the sonicwall network and an old server on the Cisco network. I want the computers to be able to see both servers
I am having long withstanding problem that I couldn't resolved till date. I am using My DELL VOSTRO A860 for more than 3 years.
My Wifi is not starting for any reason, I've installed the driver from your CD, manually downloaded from atheros site and I did all I could do to resolve the problem, but still the problem persists.
All other things are fine but still I am not able to use my wifi.
I have a new Lenovo Ideapad laptop and Im having problems connecting to internet using ethernet cable. The thing is this problem occurs only at one particular place (dorms) because Im having no internet problems at other locations.
It looks like this: I connect using ethernet cable, Windows 7 identifies the network and everything looks normal, but there is no internet when I open a browser (I tried IE, Firefox and Chrome). It just loads and loads and sometimes it loads my Google homepage, but only after approximately 30 seconds or it does not load it at all. The same applies for other pages - they do not load or they load after a minute, but the pages are incomplete, they look like HTML
When I do a ping at CMD, it shows the same problem, the replies are slow or it shows "request timed out". I tried pinging various pages or IPs with same results. The only thing Im able to ping normally is the IP of my network adapter. My IPv4 is set to automatic, but I also tried manual parametres, just in case.I tried 3 different cables, switching antivirus and frewall off, did spyware search, switching IPv6 off, switching WiFi off, reseting the main dorm router etc etc...
Strange thing is that my laptop works perfectly anywhere else (home, work...) so I suppose there is no problem with the configuration of my laptop or network adapter, BUT the internet provider says there is no problem with their network or router since other laptops works normally at THAT location (even my other laptop does work there), so mine Lenovo is the only laptop which is having problems... and when I check the properties of the network, upload is always higher than download, but generally both are very small one more strange thing: I can watch live stream videos using one particular software and I can download torrents quite normally, but loading Google and other pages is a major problem, even Outlook or Google Earth/Talk does not work properly
I have 2 sites located 500 meters away and i connect it via 2 x RVS4000. I managed to get the site to site VPN up Via internet and from my network 192.168.1.x able to reach 192.168.2.x. -where 192.168.1.100 (user try to acces my FTP server 192.168.2.99) has no issues but it's slow due to my internet connection speed.
So i setup another link via wireless( wireless bridge ) purpose is to resolve slow connection via internet.
But some how i try to set traffics divertion from 192.168.1.x to 192.168.2.99 via local LAN faild.
how possible to setup the network such as picture attached with RVS4000?
My wifi network adapter (Atheros AR5007EG wirelss network adapter) works just fine for about 50 minutes and then it shuts down and disappears as if it's not installed on the computer. To make it work, I have to shut down the computer and turn it on again.
View 7 Replies View RelatedUp until a couple of days ago, I could connect to a wireless network no problem. Now, it's as if wireless doesn't exist on my netbook.
Computer: Acer Aspire One Model: ZG5 / AOA150
OS: XP, Service Pack 3
WLAN/Driver: Atheros AR5007EG/v7.6.0.224
I've done the Recovery Console and performed the Windows Registry repairs. I've even reformatted the computer, but to no avail at all. And I've done all the basic troubleshooting and surfed forums for way too long and found no solutions.
So this is kind of a last ditch effort. It still connects to the internet via an ethernet cord, so all is not completely lost, but it kind of defeats the purpose of having a netbook without having wireless connectivity.
Okay so for the past week i have battled with my two routers trying to make them talk to each otherMy main router (router A) is a dlink dir-615 ver. BMy second router (router b) that im trying to make talk to router A is a dlink router dir-615 ver E1 flashed with dd-wrt custom firmware.I have looked at every setup guide people have posted online and youtube videos to no avail
View 6 Replies View RelatedAs titled have older linksys USB wifi adapter but Network magic wont add because 'other software' controlling adapter. Picked up a Dlink adapter dwa-131 usb wifi adapter but same issue, software conflict?Ive added several computers and laptops, different operating systems. Ipad, Ipod, blueRay, printer with no issues. But this USB wifi adapter has me completly stumped. This cant be this hard...dense I can be but... Is there a way simply that Im not seeing, adding a computer using a USB wifi adapter to my network thats compatible with NM?? Computer is an older Dell 8200 with XP sp3. I contacted support but maybe because my question was related to NM response was basically "your question was 'too technical call xxxxxxxx" -
View 2 Replies View RelatedWe have an inside interface, 192.168.10.0/23We have an outside interface, public ip...We have the ASA connected to 5 site to sites, this is working fine and through the internal interface can access all remote sites and vice vera. These are 192.168.20.0/24, 192.168.30.0/24, 192.168.40.0/24, 192.168.50.0/24 and 192.168.60.0/24,When a user connects via Cisco VPN Client they can see the inside network but can't talk to the remote networks connected, for instance 192.168.40.0/24... whereas an internal user can. I understand that the VPN client connection is seen as an outside connection, not an inside connection... but then I read [URL] and I am confused even more.
View 8 Replies View RelatedI have Vista SP2 and sometimes I can connect to some WiFis, but now I've had this problem to connect already with two different WiFis. First one was a shared WiFi in a residential house. That I solved by exporting and importing the wireless profile from the landlord's computer. This time even this solution failed me. Having imported the wireless profile in my new shared house, it asks for a password and accepts it, but then it says: "can't connect to UPC...". If I click "diagnose the problem" it concludes with "Wireless authentication failed because of a timeout"
Steps taken so far: I have now deleted all pre-existing wireless profiles from this computer -> no change
ISP: UPC (in Ireland), ADSL broadband Anti-Virus: just free version of AVG Atheros AR5007EG Wireless Network Adapter
See attached files for further info
Microsoft Windows [Versi�n 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. Reservados todos los derechos.
C:UsersOhrapirtelo>ipconfig /all
[Code].....
I was assigned a task to configure an SG300-28P to have 3 different vlans.Now on VLAN1 their will be only one device configured with static IP 192.168.0.230,On the other 2 VLANS there will be a separate router connected on each one of them and will also act as a DHCP server.
View 4 Replies View RelatedI have setup two different subnet 192.168.1.0 and 192.168.2.0 on the same 'inside' interface. They are unable talking to each other. I can ping from firewall to both subnet. Both side unable talking to each other unless I add route on the both side systems.I have added the followings in ASA5510. [code]
View 8 Replies View RelatedI'm trying to get a couple clients to talk to my Active Directory servers. I've created sub-interfaces on my ASA. So, my clients are on Gi0/1.139 and my two Active Directory servers are on Gi0/1.132. I've enabled traffic on TCP 53-5000 port range according to Microsoft. My clients still can't join the domain. What ports I need to open up? My AD servers are Windows 2003.
View 1 Replies View RelatedToshiba satellite L355d-02p01d Windows visa home premium Atheros ar5007eg wireless network adapter It will show the wireless network but will not connect to it. There are other computers connected.
View 1 Replies View RelatedI have a c3560 that on Port 1 I can not get any device to talk to the DHCP server.Previously there was a client connected to this port however over the weekend he stated he lost connectivity.
In my troubleshooting I have connected that client to another port and now he is good to go...I connected my laptop and tried to connect to the network however I could not.I checked the logs and did not see anything that lead me to think it was having problems.
Is there another way to shut this down and hopefully start it back up without having to restart the entire switch?
I have purchased these two switches from ebay as a test lab, I plan to connect them up via a gigastack modulecable and enable ip routing on the c3550 and vlans to talk to each other.
I'm very much a procurve person and really need to get into the cisco switching.I will want to trunklacp between the switches - whats the process is setting that up on cisco switches?
wireless button on the laptop is not activating, there is no wireless connection even in My network places..
View 1 Replies View RelatedIf you are familiar with the Huawei HG520s router, I want to filter an ip range (ex. 192.168.1.10 to 192.168.1.255) so that no other users can connect on this ip range and start using the router.
View 2 Replies View RelatedHow do I get the password for for the Huawei EchoLife HG520s Wireless Broadband Router,there is no indication on back of said Router.
View 1 Replies View Related