D-Link DIR-601 :: Change Regular DNS Settings To Use OpenDNS / Google Public DNS?
Apr 12, 2011I would like to change my DNS settings and I can not figure it out through the routers gui. I tried Google'ing it but I got nowhere.
View 2 Replies
ADVERTISEMENT
D-Link DIR-825 :: OpenDNS Settings Not Working?
Aug 29, 2011I'm trying to set up opendns on my DIR-825, firmware v2.05. Under the Setup/Network Settings I set the primary and secondary DNS Server IPs to the ones from [URL] and save the settings and they don't stick.I have also unchecked the "Enable DNS Relay". Well, tried it on and off and neither pad a difference.
View 3 Replies View RelatedD-Link DIR-615 :: Internal Server Error 500 - Change Router DNS To OpenDNS
Apr 4, 2013Lately, Ive been trying to change my router DNS to OpenDNS. Somehow, after changing it, I couldnt access the router page at 192.168.0.1, getting the error 500 message. I unplugged and plugged the router with no effect. Im using a dlinkddns.com dynamic IP, and have a few ports forwarded for my DVR. The router model is DIR 615. want to change the DNs for speed and filtering purposes.
View 4 Replies View RelatedCisco :: 5508 OpenDNS On Public Vlan
Jan 8, 2012I have a 5508 WLC that for whatever reason cant take any DNS settings, but I still need to get some filtering on the public hotspot side of my wireless network. Can I put the DNS settings on the router that the circuit terminates on? This is the same router that the public vlan is defined on, I'm just not sure if I can put DNS settings in place for just one vlan, and how that'd work.
View 3 Replies View RelatedSharing :: Change Network Settings So Internet Connection Appeared As Public Network
Jan 25, 2011I use my desktop for streaming media throughout the house. I found it was causing lag for gaming most likely because it was taking up all the bandwidth for the router. We had a 2nd router laying around as well as a 2nd wireless adapter so we set up a 2nd network that was not connected to the internet for strictly media streaming.I attempted to change the network settings so the internet connection appeared as a public network so that streaming of media was hopefully diverted to the non internet wireless adapter.I want a faster way of transferring large video files from my laptop to my desktop. I recently bought a crossover cable to do this through direct connection.Both use the same user name and password as well as run the same win 7 pro however the desktop is the 64 bit version. I set up both ipv4 with the same addresses.When it has worked I am only getting a connection speed of just over 10mb and once I connect the crossover cable between the computers it knocks out my internet connection on the wireless card.
View 5 Replies View RelatedLinksys Wireless Router :: WRT54G V5 To Use Google Public DNS?
Oct 21, 2011I'm trying to setup my Linksys WRT54G v5 router to use Google's Public DNS but the steps in the Google instructions are a bit vague for me: To change your settings on a router:1. In your browser, enter the IP address to access the router's administration console.2. When prompted, enter the password to access network settings.3. Find the screen in which DNS server settings are specified.4. If there are IP addresses specified in the fields for the primary and seconday DNS servers, write themdown for future reference.5. Replace those addresses with Google IP addresses: 8.8.8.8 and 8.8.4.4.6. Save and exit.7. Restart your browser.8. Test that your setup is working correctly; see Testing your new settings below.
I'm just not confident as to where I input the primary and secondary DNS IP addresses?
D-Link DIR-655 :: Horrible Connection Quality And Regular Disconnects
May 18, 2012I tried multiple times to register a username here and no matter what I chose I would only get "An Error Has Occurred" when I submit the info. I've tried this over several days and keep getting the same dead end. So, I went to bugmenot.com and I'm using a generic username that was given there in order to post this. So...there's that...
Starter info... I'm running Hardware Rev A4 of the DIR-655 on the 1.33NA firmware. I never upgraded past that firmware because of all the horror stories I'd read about new firmware here. Up until lately it's been fairly stable. The issues I refer to SEEM to coincide with my recent installation of Apple TV hardware on my wireless network, though I can't confirm. It's never been great with this router, so that could be coincidental. On my network I have a hardwired Mac Mini, wireless Macbook Pro, a hardwired D-Link DNS-321 NAS box, Apple TV, Logitech Revue, iPad, iPod Touch, iPhone and occasionally one each of a Samsung and LG Bluray player (only when they're powered up, which is rarely). I'm also using a wireless repeater in the middle of my house because the DIR-655 doesn't yield a very usable signal in my master bedroom, which is on the opposite side of the house as the router.
With all that being said... I have had terrible issues being able to keep a steady connection wirelessly with this router as of late. Streaming Youtube videos will stop after a few seconds, loading websites will just stop responding all together, and I can't even keep a connection to stream music from my Mac Mini to my phone or AppleTV using Home Sharing in iTunes. I'll get a few seconds of a song and it will just drop out completely. It's been extremely annoying and I'm ready to take a hammer to this router, to be honest.
I've checked my logs and there were all kinds of FIN:ACK, PSH:ACK and SYN:ACK TCP packets that are being blocked. I noticed many of them were coming from Apple IP addresses, so I assume that the AppleTV had a lot to do with those. I actually used the Inbound Filter settings to allow requests from a whole block of Apple IP's, which seems to have settled log items from them down a lot. There are still quite a few that seem to be coming from Google IP addresses (I presume the Logitech Revue since it uses the Google TV interface?), but the Google IP's are too random to go allowing a large block. [code]
I have Advanced DNS disabled. All Traffic Shaping and QoS boxes are checked to enable. Comcast is my cable internet provider. I've noticed that my WAN Connection Up Time is often a fairly low number like the connection to the cable modem drops out frequently.
D-Link DIR-615 :: Accessing Google Using Android Via Wireless
Jul 16, 2012Dir 615, hardware version E4, Firmware version 5.1.Intermittent (95% of the time), problem accessing Google using my Android via wireless. A PC using XP on the same network has no problems. Using the Android on my local library's network I have no problems.Have restored to factory default settings and reconfigured with no improvement.
Modem setup: Setup to connect to another router, UPnP disabled, DHCP server disabled, 802.11 mode -mixed 802.11n & 802.11g (Android connects using 802.11n PC uses 802.11g have forced Android to use 802.11g to no avail), Auto channel scan, (have tried fixed), Channel width 20/40, visible mode.Internet connection Dynamic IP of course it is going out through my other Dlink ADSL 2 modem router. Also disabled QOS engine.
Xbox 360 - Change MTU On Public Network?
Aug 25, 2011I'm trying to connect an Xbox 360 to my University's wireless network using a bridged connection between the wireless adapter and the LAN adapter. I can connect to the internet on the Xbox, but not Xbox LIVE. I get an error message stating that my MTU setting must be 1364 or higher. I obviously cannot access the router settings because they are the schools routers and I do not have administrative privileges. So, Is there some other way to modify MTU settings without that access?
View 3 Replies View RelatedD-Link DIR-655 :: Blocking Traffic On Port 80 Except For Google Earth
Mar 29, 2012I've blocked all traffic on port 80 (Advanced-Access Control- Apply Advanced Port Filter- All IP range and Port 80 selected) to avoid any kind of Web Access. I won't use Web Filter because there are too many URLs to be blocked.
However I have a problem to keep Google Earth working, since it uses port 80.
Is there a way to keep Google Earth working, even blocking traffic on Port 80? I've tried configuring an application rule to let Google Earth working, but it didn't work (it seems that I can not create an exception for Filter Port) .
Protocols / Routing :: Change MTU On Public Network?
Aug 24, 2011I'm trying to connect an Xbox 360 to my University's wireless network using a bridged connection between the wireless adapter and the LAN adapter. I can connect to the internet on the Xbox, but not Xbox LIVE. I get an error message stating that my MTU setting must be 1364 or higher. I obviously cannot access the router settings because they are the schools routers and I do not have administrative privileges. So, Is there some other way to modify MTU settings without that access?
View 1 Replies View RelatedHow To Change Windows 7 From Private To Public Network
Jul 25, 2011I have an existing network with several computers running Vista and XP. My new computer has Windows7. The WIN 7 computer can access the router and the internet. But it is invisible to the rest of the network. It is currently set up as "private network". I think it should be "public network". How / where can I change it ?
View 1 Replies View RelatedUnable To Change TCP/IP And DNS Servers Settings?
Feb 21, 2013I have DELL desktop PC with Windows 7 64 bit. Once i have used HotSpot Shield for few days. After uninstalling the HotSpot, I am unable to change TCP/IP and DNS servers settings. My network adaptor is set up to default (automatically obtain ip address). Each time when i tried to change the dns servers settings, it requires a reboot (which is not happened with other PCs). and after reboot, its again set up to obtain ip and dns servers settings automatically.I have Avira FREE antivirus and its not showing any virus.I have cleaned my PC using Malwarebytes, some virus detected and removed but in vain.I am still unable to change my Network Adaptor's dns servers settings.
View 1 Replies View RelatedWireless :: How To Change Connection Settings
Feb 10, 2011I am trying to set up a internet connection to my campus network. i followed there instructions to the T. The network requires me to change my proxy settings. But every time i change my proxy to connect to the to the network, it say that i am connected but i can seem to load any pages. it worked before but i just redid my computer an it doesn't work now. one of the steps in the list of instructions given to me by the university was to select "dial whenever a network connection is not available" but selecting this is restricted for sum reason what do i do ?
View 1 Replies View RelatedNetwork Settings - Can't Change DNS Server
May 21, 2012I can't change my DNS servers. I went to my Network Settings and changed the settings for my DSL adapter. I manually changed the DNS servers to OpenDNS's servers, but when I looked again, the settings always change back to the localhost, 127.0.0.1. I tried to reset my DSL but still no luck.
View 3 Replies View RelatedHow To Change The Encryption Settings On Asus Usb N13
Jan 12, 2012I am trying to set up a asus usb n13 wlan. I have everything installed and it shows connected to my router but then I get an error message saying that the encryption settings do not match so data will not pass. The WLAN is set up to use WEP but my router uses TKIP+AES (WPA2-PSK). There doesn't seem to be a support phone number or live chat access but I did turn in a technical request form. Just trying to save time and get this thing up and running.
View 1 Replies View RelatedLinksys Wireless Router :: EA4500 Cannot Change To New Public IP Address
Jun 23, 2012I have noticed that after the new Firmware Update, the EA4500 will not change to a new public address. I have check my logs and my IP Address is the same going back to a 03/25/2012. I changed my router back to my old E4200V1 and it changes to a new addresses when the old one expires.
View 3 Replies View RelatedCisco Firewall :: ASA5510 - Change Public IP Address On Outside Interface?
Mar 10, 2011we have two Cisco ASA 5510 in failover configuration.We tried to change the public IP address on the Outside interface of the primary device but it didn't works. The new IP is not reachable from Internet nor pingable from device on the same LAN.The new IP address is in the same subnet of the old IP.
From the switch on which the ASA is connected and from another Cisco PIX we can see the ARP entry. In the analysis, on the old public IP address there was a VPN site-to-site and Webvpn defined.We tried also to shut/no shut the interface and reboot the device.
Routers / Switches :: How To Change IP Filter Settings
Jul 5, 2011For some port fowarding reasons I have to change my router setting to these:Maximum Ports: 4096TCP Timeout (in seconds): 600UCP Timeout (in seconds): 120I am using a Realtek router ( Family PCI-E Gigabit Ethernet <NDIS 6.20>)This is supposed to be EXTREMELY easy but I lack any general computer knowledge whatsoever. In laymen's term, I am N00B.
View 1 Replies View RelatedDedicated 2nd Wifi Network Or Change Qos Settings?
Oct 22, 2012In my restaurant, we currently have a password protected wifi network for customers and staff. The load is typically light, so it's worked fine. Now, we're putting in a new cloud-based point of sales system, which effectively means that I need a totally uninterrupted, high quality wireless signal running to the POS terminal (in this case, an iPad). If the terminal is sharing that connection with 15 customers Facebooking on their iPhones, I imagine we'll have some signal issues. I'd rather not install a second network dedicated to the POS terminal. Are there any other possible solutions, i.e. a way to give priority to the terminal over other connections? A way to "split" the existing network so only a portion of it is available to customers?
FYI, current network speed is 20/mbs 2/mbs, and the POS terminal requires a minimum of 7/2 mbs.
Linsky Router - Change Network Settings?
Feb 5, 2011When I set up my Linsky's Router,I set it up for 2 old computers (I can do 3 on it.) I bought a new laptop & added that. I no longer own the 2 older computers and would like to remove them & add my sisters laptop + the newer laptop she gave my little girl. I would also like to change it so that it is password protected instead of closed so that family & friends who visit may get online as well.
View 3 Replies View RelatedHow To Change Proxy Settings On A Dell Inspiron
Feb 6, 2011I have a Dell Inspiron and it had a virus that didnt let me get into anythihng I took care of the virus, but now when I go to internet explorer it says I cant connect (I am connected to the wifi) so it tell tells me something about tools-internet options-connections-LAN settings, but I have no idea how to fix the proxy settings?
View 1 Replies View RelatedNetgear WNR2000 - Change Default Settings?
Jun 1, 2011How do I personalize the settings on my router from default. Netgear wnr2000.
View 2 Replies View RelatedCan Ip Provider Change Wifi Connection And Settings
Jan 11, 2011we are charter High speed customers and just recently upgraded are connection speedHowever today my sisters netbook wireless connection stopped working. My DS wifi connection is also dead now In the past the the wireless network name was wifi-****** but now its called wireless and the wep key no longer works
View 5 Replies View RelatedChange Cisco Wireless From A Dynamic To Static Settings?
Jun 28, 2012How do I change my cisco wireless from a dynamic setting to a static settings.
View 1 Replies View RelatedChange Security Settings On DLink Wireless Router?
Jan 16, 2012how to change security settings so my kids can go online on their nintendo ds lite. we have d link router. 192.168.0.1
View 1 Replies View RelatedChange The Network Adapter Settings To 100 Full Duplex?
May 19, 2011If I change the network adapter settings to 100 Full Duplex, is there any changes that will take effect? even if we don't have Cisco switches in our network.
View 4 Replies View RelatedLinksys Access Point :: WAP610n Can't Change Wmm Settings
May 4, 2010I try to change the wmm settings to video, but it's always going back to background settings after saving.I already re-uploaded the firmware, but with no result...I noticed that is a newer firmware available for the WET610n where they solved this issue, but they haven't changed it for the WAP610n....
View 9 Replies View RelatedCisco WAN :: AP 1242 Change Duplex Settings After Reboot?
Jun 26, 2012we have over 100 AP1242 with c1240-k9w8-mx.124-23c.JA2 image, tow 5508 controller and WCS running. After the ap reboots, the duplex settings of the fa0 interface change to half duplex. I have to set it manually to full duplex. In my WCS or with the 5508 controller I have no chance to set the duplex settings for my ap's.
View 7 Replies View RelatedCisco Wireless :: WRV200 Change Configuration Settings
Jul 18, 2011I have had a WRV200 wireless router running at the family office now for a several years now and recently I was made aware of an issue with the router. Previously it's function was to provide internet access for the laptops at the office and two workstations. It was a simple set up really, 1 SSID was for the work computers that were allowed on the internet and another SSID for personal and quest wireless devices and I made sure they were in seperate VLANs. This issue came into light after our office moved and with some new upgrades in networking equipment it was deemed safe enough to have the other computers on my wireless router.
What is happening is that all the computers will have a momentary drop of connectivity and will re-establish it's connection to the wireless router. I check the event viewer and it's the same thing accross the board. I'll have several DHCP warings specifically event ID 1003 and finally DHCP error 1000 almost 30 minutes after the first warning. From the looks of it there is something going on with the DHCP addresses about to expire and the systems are having issues trying to get it renewed. The error will happen then the computer will restore the connection.
I have it isolated to the WRV200 because of two reasons. Every machine is having this issue, it's not a random occurance on one computer. The big clue was when I checked Event viewer on my Marketing Director's laptop. These same errors were present all the way back to May which was before the office move and the router was provide access for our laptops to get online. There was no other networking equipment connected to it except for the Clearwire modem.
Between May and now the router has been reconfigured from scratch. New SSIDs, redid the internal IP addressing network wide to incorporate the new computers and would be easier to manage them that way. All wired devices go through a 16 port switch and then through port 1 on the router. Port 1 is on VLAN 1 and the others on VLAN 5. The 3 SSIDS are each on their own seperate VLANs. All systems are on DHCP and the important computers and the printers I am using Static DHCP. In the mean time I set all the important machines to use an alternate IP addressing scheme so hopefully there is no drop in conenctivity. While the drop is minor it could cause issues in the program called SLS (especially during printing) so I can not have this issue to continue. Configuration wise everything is defualt, is there something to change in the configuration settings that I may have missed twice now or the router simply near the end of it's life cycle.
Cisco :: Discovery Settings Of Scheduled Job Doesn't Change - LMS 4.0.1
Aug 8, 2011I use CiscoWorks LMS 4.0.1.
I planned a discovery of devices for some time, but if I change the parameters of discovery (adding a seed device) in "Discovery Settings Summary", this change does not apply in the scheduled task.
If I change the settings in the scheduled task, the changes do not apply in "Discovery Settings Summary". We must change the settings 2 times.
Linksys Access Point :: WAP54G - Change WPA Security Settings?
Jun 16, 2012I have a new WAP54G Access point in our network. I would like to change WPA security settings, but am not able to do it.I have done everything as installation leaflet says, and I get to the 5th point Status sheet: Firmware version v.304, MAC address (numbers), IP address 192.168.1.245, SSID linksys, Channel channel 6 and WEB security Disable
What I would like to do, is change SSID and have WPA2 security. When I am clicking "Yes", it goes to the next sheet "Password", I write admin and click "Enter". I will have Pop-up window "Setup Access violation at address 0049BDB6 in module 'Setup.exe'. Write of address C933016A."
Linksys Wireless Router :: WRT160NV2 - Get Screen To Pop Up To Change Settings?
Sep 11, 2012I have a computer that is connected to a linksys wireless router model WRT160NV2. I also have a laptop. I have never set up a lock or anything on my wireless connection and I think other people are using it. When I type the IP address 192.168.1.1 on my laptop, I do not get the screen to pop up to change my settings. Do I need to do this from the computer?
View 1 Replies View Related