D-Link DIR-655 :: Deny All Access Except Specific IP's To Service
Apr 1, 2013Is it possible to deny all access except specific IP's to a service on a Dlink DIR-655 ?Say a web server on port 1234.The allowed IP's are not in a range.
View 1 Replies
ADVERTISEMENT
Cisco Switching/Routing :: 1921 - Deny Specific Port From / To IP
Oct 7, 2012I have a network with 3 segments and a 2921 router.v172.16.5.0/24, 172.16.0.0/27 and 172.16.2.0/23 .
I want to block all 135 TCP traffic from/to IP 172.16.5.5 to any host in other segment, but only TCP port 135 and only to the specified IP.
TP-Link Dual-Band Wireless :: WDR4300 - How To Deny Access To Internet For Certain PCs
May 9, 2013Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.31 Build 130319 Rel.57876n
ISP : BT Infinity
I have 11 wireless devices connected to WDR4300. These are PCs, phones, tablets, PS3 etc. All devices have assigned DHCP addresses.I have read lots of faqs and searched the web, but still can not figure out a simple way to achieve the following:
I would like some of my devices have NO access to the Internet from 2200 to 0600.
D-Link DIR-615 :: Restrict Access From Specific Devices?
Nov 18, 2012How can I restrict wireless access to specific devices? Ideally, I would like to turn the access off and on to restrict my children's usage when we're not around or when they try to sneak on during the night.
View 5 Replies View RelatedAAA/Identity/Nac :: 7206VXR - Apply Specific Service Policies Per PPPOE - User
Jun 3, 2011We are trying to apply specific service policies per PPPOE-User.
Our BRAS is a Cisco 7206VXR , running c7200-spservicesk9-mz.122-33.SRE3.bin
When we try an very easy service policy as following the policy is well applied:
Code...
Cisco :: Access Deny In L3 Switch?
Jun 8, 2012i have Cisco L3 switch configured with diff vlan and assign diff subnet for all vlan . if i connect pc to vlan 2 i am able to ping host related to other vlan
View 5 Replies View RelatedCisco Wireless :: 857W - Deny PC Access To Web?
May 28, 2013I need developing a acl that can block a computer on the LAN from accessing the internet from midnight to 7am everyday. The router is a 857W, the computer is 192.168.2.33 the internal gw 192.168.2.254 (dialer 1 is 1.2.3.4).acl 101 deny tcp host 192.168.2.33 eq wwwwhat I need to figure out is how to add a time based acl to just this computer.
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.1 How To Deny Access To User
Jun 12, 2011I have ACS 5.1.I have created the Identity Group 'Admin' and added 2 users in that, say User1 and User2.How do I permit only User1 to get authenticated when he logins in to the device?There is option to select 'UserName' while creating Service Access Policy , but I have observed that though I have mentioned only User1 in the rule, User2 is also getting permitted
View 1 Replies View RelatedCisco :: 3750 - How To Deny VLan To Access Another One
Dec 5, 2011We have a 3750 which has a few vlans configured. One Vlan is for public access wifi and another for our security system (door access, cameras, etc.). I don't want the public wifi vlan to access the security system vlan. How can I accomplish this in the 3750?
View 4 Replies View RelatedCisco WAN :: 2801 Way To Deny Access To A Specify Web Site
Apr 5, 2012I have a 2801 router. Is there another way to deny access to a specify web site ( like youtube, facebook .. etc ) without create acl's with specifed ip's ? The router doesen't support url filtering. I thought to do something like redirect traffic to another site : for example if one client want to access url.. that the browser will open url...
View 4 Replies View RelatedServers :: Deny Access To Server 2008 Allow Internet?
Jan 18, 2011I set-up my law firm network with a server 2008 database. Now I am renting out one of my offices to a separate lawyer and I want him to be able to use my network to access the internet, but not my server 2008. Is that possible or is it already secure being I haven't installed any of my software on his computer?
View 2 Replies View RelatedCisco :: Give Limited Access To A Client Or Deny All?
Jul 5, 2012Recently a router crashed and some suspicious about the client arised. The point is that now the order is to deny all kind of router admin access for the client. I was thinking, is this a good idea or will be better to give him limited access to the router, to avoid the client to try to access the router at all cost? Something like to stop the motivation to crack the router password.
View 7 Replies View RelatedHow To Protect Shared Folders To Deny Access From Server
Sep 18, 2012How to protect shared folders to denie access from server???i am really in need of a software where i can share files on network but i don't want the system administrator to access those files.
View 1 Replies View RelatedCisco Switches :: SF-300 Deny Access To From One Port To Other 4 Ports
Jul 20, 2011I have 5 VLANs, I assign VLANs to its ports and make them all Untagged.I created ACLs and a ACE rules for each ACL, and then assigned to the ports.So what i am trying to do is to deny access to from one port to other 4 ports and granted access to any other ports. But it is not working, without last rule "allow any any" it has no access to any ports, with the last rule it grants access to every port even to those I denied.Router in Layer 3 mode, all VLANs have their IP's.
At some moment I was able to work it properly but without using any rules, I just tagged my untagged VLANs to those ports which I wanna get access to. As you can see I want allow ports GE1 - GE4 communicate with 1 to 24 ports but not to each other.
Access Control Lists Deny Traffic From Entering Network
Oct 5, 2011My network topology consists of 3 directly connected routers where the central router contains sensitive data and i need to block traffic from ENTERING the LAN adjoined to that router. My issue is creating an access list to DENY traffic from entering the network connected to Fa0/1 but ALLOW traffic to exit from that network. I am using one class C network which is subnetted 7 times to provide me with the required LAN's.
View 2 Replies View RelatedCisco Wireless :: WLC 4402 - Deny Network Access To Smartphones
Jun 29, 2011I would like to know if exists some configuration using a WLC 4402 that deny network acces to smartphones but not to netbooks and laptops.
View 1 Replies View RelatedSharing :: Deny Access To Folders On Main Computer Using Admin Accounts
Sep 20, 2012My home network is all Windows 7 computers (4 total), and are Ultimates except for my laptop, which is Home Pro. So that's 3 computers with Ultimate and 1 with home pro. I have one computer (also Win 7 Ult.) that's my primary computer, the other 2 computers are mostly HTPC computers that I have set up to stream from my main computer.I do know how to set up Home groups for sharing files, but I could only set it up that there would be full access to the shares or no access at all. [For simplicity: My primary computer will be PC-1, the 2 HTPC's will be PC-2 and PC-3, and my laptop PC-4.]PC-1 will host all the files I want access to. PC-2 and PC-3 will access my music and videos folders for streaming. PC-4 which is my own personal laptop will have full access to shared folders that I DO NOT want being able to be accessed on PC-2 and PC-3.I have tried many and various types of ways to deny access from PC-2 and PC-3, where PC-4 would be allowed access to on my PC-1, but every time it's either all PC's get access or NO access to the shared folders. I also want to keep all my user accounts as admins.
View 2 Replies View RelatedCisco Routers :: RV-120W / How To Deny User From Access Some Website Through Proxy
Sep 9, 2012I have block some website in URL Blocking.But they can access the website which i have blocked through proxy server? Can i deny user access proxy server? It has many proxy server,i can not block the proxy server one by one.
View 1 Replies View RelatedCisco VPN :: Selected Shell Profile Is Showing Deny Access 5510
May 17, 2012i have got the below long on the acs 5.2,one the vpn client user connect to asa 5510
Description
Selected Shell Profile is DenyAccess
Resolution Steps
Check whether the Device Administration Authorization Policy rules are correct
Cisco Switches :: SG300 - Implement ACL To Permit Or Deny Access Between Vlans And Hosts
Mar 25, 2012I have a SG300 Switche working in layer 3 mode.I configured 3 VLANs on the switch, assigned all ports, given IP addresses to VLANs interfaces, etc.Now I want to implement ACL to permit or deny access between vlans and hosts.Can I apply an ACL to a whole VLAN (in or out) like Catalyst models?I mean apply the ACL to the entire vlan or the only way in this model is to implement that ACL port by port?Every time I have a new port configure to work in a Vlan I have to implement the ACL?
View 4 Replies View RelatedCisco VPN :: ASA 5510 Implicit Deny Access Rule Blocking Site-to-Site VPN?
Apr 22, 2012I've setup a site to site vpn on an ASA 5510 using ASDM (as I have many times before) and the tunnel appears to be up but I am not able to pass traffic. When I run the packet tracer from my inside network to the remote destination network, it shows that it is blocked by the implicit deny ip any any rule on my inside incoming access list.
View 5 Replies View RelatedRouters / Switches :: Rate Limit On Specific Port From Specific Range?
Jul 1, 2012Is it possible to enable an absolute value rate limit using QOS on a HP ProCurve 5406 switch for a particular IP range on a specific port? Is there a way to configure our HP 5406 with an absolute rate limit on "WAN" port for that server's IP range? I would like to limit it to only being capable of sending 1Mbps worth of traffic over the head end at once.Everything in the documentation points towards priority queues, which as far as I can tell, isn't really what I want.Baring accomplishing this goal using rate limiting is there a better way to prevent our services from accidentally saturating this connection?i thimkong about somthing like that:
class ipv4 rate-limit-port-A1
match ip 10.136.0.0/16 any
exit
policy qos port-a1-ratelimit
class servers-to-be-slowed action rate-limit kbps 1000
exit
interface A1 service-policy port-a1-ratelimit inI'm not sure about this.
Cisco Routers :: RV082 - Route Specific Ip Address To Specific WAN Port
Oct 25, 2011I use a router RV082 with load balancing. My problem is when I try to access a specific site, I get the error message that my IP address changes and I can not use 2 ip address. I want to specify an ip range to always use the same WAN port.
View 2 Replies View RelatedCannot Access Specific Website
Sep 22, 2012I've gone through a variety of diagnostics and I honestly don't know what to think. It's not my computer, as I can access the site on this computer on a different network. It's likely not the whole of my LAN network either, because my kindle can access the site through it. I can always access it on this computer with a proxy as well. I can ping it fine, and tracert it equally as well.I've tried everything from socket fixes, DNS flushes, getting new WAN IP addresses. When I got a new WAN IP address the first time the site was accessible once, and then it stopped again after that. I can't clone the MAC address from the router, because it doesn't allow it.
View 7 Replies View RelatedCannot Access A Specific Website
Feb 14, 2011For some reason, there is a specific website that I cannot access. I am a member of the website and they have a community forum for contacting them and requesting support, but obviously I cannot contact them if I cannot access their site!
The website is [URL]. I read in another post that I should do the TRACERT command and post the results so I am doing that here.
Can't Access A Specific Website
May 26, 2012Ever since last night ive not been able to get onto a site that i use every single day. I can get on the site through my 3g on my phone and ive tried it round my friends house and it works perfectly.Tried releasing and renewing my IP Address, no effect and have just ran a Tracert:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersMatty>tracert olbg.com
Tracing route to olbg.com [164.177.153.185]
[code]...
Can't Access A Specific Website?
May 26, 2012Ever since last night ive not been able to get onto a site that i use every single day. I can get on the site through my 3g on my phone and ive tried it round my friends house and it works perfectly.Tri[CODE]
View 1 Replies View RelatedD-Link DIR-615 :: Blocking Not One Specific Website But All Websites?
May 16, 2013In Setup > Parental Control it is possible to set rules attached to specific website URLs. I want to block access from 1am to 6am.
However these rules only apply to websites URL. Is there a way to apply a rule to ALL websites at once? I tried to enter "*" or "*.*" in website URL field but it doesn't work.
D-Link DIR-655 :: Blocking Specific Computers On Lan From Websites?
Apr 28, 2011Is there a way to block specific computers on the LAN from specific web sites by the domain name? All I can see is that if I put, for example, www.facebook.com, it will be blocked from all computers on the LAN, whereas if I want to block only 192.168.1.3 for example, I have to use the IP address through the Access Control, which is much harder and ****e to some "work around" by the user.
View 3 Replies View RelatedD-Link DIR-601 :: Throttling Bandwidth For Specific Devices?
May 16, 2011Bought a DIR-601 for my sister and her kids for their home. Setup and works successfully. Sis asked if there is a way to give her laptop bandwith priority over the kids devices. As is, they are all sharing limited DSL bandwidth. Reading the manual, I see the QOS feature for specific types of traffic, and other limiters and schedules to shut out certain MAC addresses entirely. But wondering if this throttling feature exists in the router also.
View 11 Replies View RelatedD-Link DIR-825 :: Block Inbound Traffic From A Specific IP?
Oct 5, 2011How to configure the 825 to block inbound traffic from a specific internet IP address ?i noticed an IP and MAC that i don't recognize that is listed as a connection to my NAS's media server ...i blocked it in the NAS configuration page, but i don't want any unsolicited traffic into my network.
View 3 Replies View RelatedCisco VPN :: ASA 5520 / Define Specific IKE Proposal For Specific L2L Tunnel?
May 24, 2011ASA 5520 running 8.0.4
ASDM v.6.1
Need assistance understanding how in ASDM/Configuration/Site-to-Site VPN/Connection Profiles/ "Any Entry" I can specify that I only want to offer an IKE Proposal of pre-share-aes-256-sha?
The IKE Proposal field has a number of possible options including: pre-share-aes-256-md5, pre-share-3des-md5, pre-share-aes-256-sha, pre-share-aes-192-sha, pre-share-3des-md5, pre-share-aes-sha and pre-share-3des-sha.
I am able to pick a specific IPSec Proposal w/o issue but when I attempt to do the same for the IKE Proposal, and click OK the choice does not "stick" but rather returns to the entire list as defined above.
TP-Link 3G/3.75G Router :: TL-MR3220 Any Specific Antenna Or Type That Can Be Used
Dec 29, 2012]Region : Philippines
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.14.2
ISP : globe telecomms inc.
i just bought an antenna for my new tl-mr3220 v2 router that is 9db. my current one is he 5db that was supplied together wit the unit. then when i installed the new antenna, instead of an increase in the range it lower than my old one. is there any specific antenna or type that you can use? if so what types of antennas?
