Cisco Routers :: RV-120W / How To Deny User From Access Some Website Through Proxy
Sep 9, 2012
I have block some website in URL Blocking.But they can access the website which i have blocked through proxy server? Can i deny user access proxy server? It has many proxy server,i can not block the proxy server one by one.
View 1 Replies
ADVERTISEMENT
Sep 9, 2012
How can i check the website history in router?I want to know the website which the user explored through the router.
View 1 Replies
View Related
Jan 17, 2013
i am using the router,rv 120w can i redirect website to a special IP? for example,the website www.cisco.com, can i redirect it to the IP :8.8.8.8 in router?
View 1 Replies
View Related
Jun 12, 2011
I have ACS 5.1.I have created the Identity Group 'Admin' and added 2 users in that, say User1 and User2.How do I permit only User1 to get authenticated when he logins in to the device?There is option to select 'UserName' while creating Service Access Policy , but I have observed that though I have mentioned only User1 in the rule, User2 is also getting permitted
View 1 Replies
View Related
Oct 12, 2011
I managed to set up an ipsec vpn between the RV 120W (responder) and Shrewsoft vpn client.The virtual ip and dns for the client pc are manually set. The tunnel is enabled, but I see no traffic between the local and the remote LAN.I can't ping or reach any pc behind the router.Using the command ipconfig /all on the client pc, I see that no gateway is assigned to the virtual vpn interface.So it seems that the RV 102W is unable to pass to the client the address of the default gateway for the lan, and I think this is why I can't access any resource.
View 4 Replies
View Related
Dec 5, 2011
I have a RV 120W router and SBS 2011 Essentials server. The remote access was working porperly, but now when I type the URL it brings up the RV login screen instead of the Remote Access sign in page. I am not certain what settings are messed up.
View 3 Replies
View Related
Oct 13, 2010
I recently cut over from a WRT54G to a RV120W. I am having an issue where I type [URL] (for a server running on my network) in my web browser while on the internal network and it always comes back with the router login page. Basically it is supposed to go out of the router and then come back in on the public IP address and hit that server. There was a function on the WRT54G called "Filter Internet NAT redirection" which when turned off would allow this to happen. I am not seeing a feature like this on the RV120W
[URL]
View 29 Replies
View Related
Apr 25, 2012
We currently have one Cisco ASA 5510 firewall at our mailn office. Our firewall does not let users access the internet. We currently have a web proxy that lets users access this. I need to let users access one website through the firewall without going through the firewall. I believe this is possible if I use dynamic NAT.
View 1 Replies
View Related
Oct 25, 2011
used to be able to access this secure website [URL] prior to a firmware upgrade. Can no longer access. On Firmware Version: 3.0.2.01-tm. Assuming there's some default setting in the firewall?
View 2 Replies
View Related
Sep 27, 2011
I have the RV 120W router, and can not seem to get SNMP Set to work. I though I would just check here, and make sure it is supported, and if it is, are there any special config settings I need to use?
View 2 Replies
View Related
May 5, 2013
I am interested in the QuickVPN solution for a Mac.I am getting mixed messages in my searches.If not, what is the secure, reliable way to use an RV-120W with a Mac?
View 1 Replies
View Related
Aug 7, 2011
How to get Real IP of user that Online via Proxy without using x-forwarded for(When proxy server not trusted)?
View 9 Replies
View Related
Nov 22, 2011
I have configured a router WRV210 and I left it enabled in order to access it remotely, but I can not connect to it. I have checked the settings and everything is fine, but if I try to access it from anywhere in the website does not load, either IE or Firefox or Chrome.
View 7 Replies
View Related
Jan 29, 2011
For the life of me I can’t get my quick VPN client to connect to my Cisco 120w. I have IPSec gateway to gateway setup and working just fine. I made my quick vpn client under vpn tab. I enabled remote management. Every time I try to connect I get the failed to establish connection. Using the same quick VPN software I can connect to a rv082 with no trouble.
View 2 Replies
View Related
Sep 30, 2011
I recently replaced a client's router with a Cisco RV 120W. The client employs a web-based application on an internal server that manages their business. Workers in the field use a handheld device power by WIndows Mobile to access a mobile version of the the web-based app. Data contained on the mobile app syncronizes with the server when workers choose a sync menu. Some workers perform this sync in the field, others wait till they return to the office and use the wireless provided by the router. Prior to changing the router, the synching worked fine either inside or outside the company network. The mobile app accesses the internal server via the router's public IP address. The router forwards the http requests to the internal server. But now the synching does not work internally. I assume it's because the Cisco RV 120 W does not support NAT Loopback, or I simply haven't figured out how to enable it. Does anyone know how to enable NAT Loopback on the RV 120 W so I can access the web-based app by through the router's external IP while on the private side of the LAN??
View 2 Replies
View Related
Sep 30, 2011
I have an RV110W running firmware version 1.0.1.6 and I am trying to figure out how to enable website blocking in the Internet Access Policy screen. The Add Row button is grayed out in that section, as are the associated checkboxes.
Is there something else one needs to do to enable this feature?
If I set a name etc. at the top, and click save, it tells me "You must at least set a website blocking or PCs rule," so it is not the case that one has to save some information before continuing!
View 10 Replies
View Related
Apr 27, 2012
I just can not find the way to check the mac address and computer name of the client which connected to my rv 120w?
View 1 Replies
View Related
Dec 21, 2011
I just installed a new RV 120W to replace my dlink router.The problem is i cant display the configuration site (192.168.1.1). My internet is working fine and when i go to 192.168.1.1 i can logon (with the password i set using the installation disk) but then i see the top of the config site (blue) but where the config panel should be i see `site cannot be displayed`.
View 4 Replies
View Related
Sep 12, 2011
I am not a tech guy but have to take care of some basic IT stuff. I had Ether fast cable/DSL router and it got changed with RV 120W router. there were comment that internet is now working slowly - what could be the reason for this?
I copied most of settings. First big technical problem was with phone. It stopped working - call could get through but when answered there was no sound. We use linksys modem for VoIP. I called operator and was told to disable sip alg. I did that and service improved a little. When answering a call sound could get through but would stop for few moments and then continue. Operator told me to forward port 16384 to 16482 to VoIP modem IP. But I can only set forwarding for one port at the time in "Port forwarding" settings. Is there a way to forward to port range?
View 4 Replies
View Related
Apr 11, 2012
We are currently using Cisco ACS 5.3.0.40.2. One of the Services Selection Policy it hosts is:
Receive Authentication request from a wireless controller for a wireless userIf the wireless user's username contains a particular domain suffix, the request is proxied to an external proxy server using an External Proxy service (configured for both local/remote accounting)On receiving an Acccess-Accept from the external proxy, the user is given access and ACS 5 will start logging account packets for the username (nothing appears in the RADIUS authentication logs - ACS 5 it seems doesn't log proxied authentication requests) The above setup works fine in most instances. We start to have problems when an external proxy server strips the domain suffix off the username in the Access-Accept packet e.g.
ACS 5 proxies an Access-Request to an external proxy server (with Username = someuser@somwhere.com)The external proxy replies with an Access-Accept (with Username = someuser)The user 'someuser' is given access but subsequent accounting attempts fail because their username (without the domain suffix) doesn't match the Service Selection PolicyIs there any way to get ACS 5.3 to log proxied authentication requests? If not, can I configure ACS 5.3 to use the username in the Access-Request packet (rather than the username in the Access-Accept packet) for accounting?
View 2 Replies
View Related
Mar 27, 2011
There is a proxy server at our office, it is preventing me from using yahoo messenger webcam service. I am unable to see others cam as well as broadcasting my cam to others.bypass the proxy server to use the cam.I dont know the password for the proxy server or router?
View 2 Replies
View Related
Mar 3, 2013
I have a RV120W; configured to perform port forwarding. I have Configured a Port Forwarding and Access Rule
* Sample Firewall: Access Rules:
Action | Service | Status | Connection Type | Source IP | Destination IP
[Code]....
Everything works, but in my destination server, i see as remote address the IP for the RV120W. I want it to forward also the originating IP address of the client (the remote address)
Is it possible to configure this?
I have also configured DMZ for my server, but see same behaviour
Firmware: 1.0.3.10
View 3 Replies
View Related
May 27, 2012
I have recently changed a couple of our companys office routers over from a netgear vpn router to this, all has gone well with the cisco router providing much better speed and reliablilty... But....
I have one little problem, at one of our offices they have a brother printer that has a scanner built in, since this change over the scanner does not seem to want to work,
as far as i can guess the router is blocking communication to the scanner, printing is working fine. is there anything that I need to enable or add to the settings on the cisco to get this working? I believe that the printer is using some kind of multicast to connect to the PC's
View 1 Replies
View Related
Sep 11, 2011
We have just acquired a Cisco RV120W Firewall Router and we are experiencing issues with this router. I've read some threads related to port forward issue with RV120W before writing this new topic.
We have 2 locations (site A and site B) connected with a Site to Site VPN (PPTP) running under Windows Server 2008 R2 with TMG 2010. This Site to Site VPN worked very well until we replaced our old router with the RV120W at site B. Since this moment, our engineers are not able to make the site to site VPN work again. The TMG box are located just behind the router.
We have followed some threads about Port Forwarding but it did not solve our issue (others port forwarding rules for RDP for example work). Our RV120W is running the last stable firmware (1.0.2.6) provided by Cisco.
View 1 Replies
View Related
Jul 28, 2011
I have created 7 QuickVPN users on router and on QuickVPN client. They all work except two. Have deleted and reinstalled on router and in QuickVPN to no avail. Changing the user name by one letter works (eg user NameVPN doesn't work, but NameVP does). Somehow router (I think) is not releasing user credentials/policies (which seems to agree with log). I have rebooted router.
View 1 Replies
View Related
Sep 15, 2011
I recently installed a new RV120W router at one of my customer's office. I have 2 users connecting using the Quick VPN software.The first one is running on a Windows XP Pro SP3. Everything works great on this PC.The second PC is running on a Windows Vista - The QUICKVPN client stays at Veryfing Network and Eventually I get an error " The remote gateway is not responding. Do you want to wait?I have disabled Firewall on both PCS for troubleshooting purposes.
View 1 Replies
View Related
Jun 8, 2012
i have Cisco L3 switch configured with diff vlan and assign diff subnet for all vlan . if i connect pc to vlan 2 i am able to ping host related to other vlan
View 5 Replies
View Related
May 28, 2013
I need developing a acl that can block a computer on the LAN from accessing the internet from midnight to 7am everyday. The router is a 857W, the computer is 192.168.2.33 the internal gw 192.168.2.254 (dialer 1 is 1.2.3.4).acl 101 deny tcp host 192.168.2.33 eq wwwwhat I need to figure out is how to add a time based acl to just this computer.
View 2 Replies
View Related
Dec 5, 2011
We have a 3750 which has a few vlans configured. One Vlan is for public access wifi and another for our security system (door access, cameras, etc.). I don't want the public wifi vlan to access the security system vlan. How can I accomplish this in the 3750?
View 4 Replies
View Related
Apr 5, 2012
I have a 2801 router. Is there another way to deny access to a specify web site ( like youtube, facebook .. etc ) without create acl's with specifed ip's ? The router doesen't support url filtering. I thought to do something like redirect traffic to another site : for example if one client want to access url.. that the browser will open url...
View 4 Replies
View Related
Jul 5, 2012
Recently a router crashed and some suspicious about the client arised. The point is that now the order is to deny all kind of router admin access for the client. I was thinking, is this a good idea or will be better to give him limited access to the router, to avoid the client to try to access the router at all cost? Something like to stop the motivation to crack the router password.
View 7 Replies
View Related
Jul 20, 2011
I have 5 VLANs, I assign VLANs to its ports and make them all Untagged.I created ACLs and a ACE rules for each ACL, and then assigned to the ports.So what i am trying to do is to deny access to from one port to other 4 ports and granted access to any other ports. But it is not working, without last rule "allow any any" it has no access to any ports, with the last rule it grants access to every port even to those I denied.Router in Layer 3 mode, all VLANs have their IP's.
At some moment I was able to work it properly but without using any rules, I just tagged my untagged VLANs to those ports which I wanna get access to. As you can see I want allow ports GE1 - GE4 communicate with 1 to 24 ports but not to each other.
View 5 Replies
View Related
Apr 1, 2013
Is it possible to deny all access except specific IP's to a service on a Dlink DIR-655 ?Say a web server on port 1234.The allowed IP's are not in a range.
View 1 Replies
View Related