D-Link DIR-655 :: Wireless N Adapter Only Connects On G Speed?
Feb 10, 2011
I have a DLINK DIR-615 wireless n router and recently bought the wireless n network adapter for the xbox 360.When I put my router to mixed mode n,b,g the xbox connects fine to the router.As soon as I switch the router to n only mode the xbox cant connect to the wireless network.My laptop which is also wireless n connects fine on wireless n.It sees the network but cant connect to it.btw. I have switched all security off on the wireless to try and test this.
View 7 Replies
ADVERTISEMENT
Nov 20, 2011
First-I use a vpn service.I had a netgear router connected to my main computer and had no problems at all.I got rid of the netgear router connected the DIR-615 to my main pc.Configured the router,and everything works ok.I get a signal anywhere in the house,and speeds are fine,as far as the laptop.I dont use a a vpn service on the laptop.Just the regular cable connection.No problems at all.I have my main pc hard-wired to the router.When I connect my main pc using a vpn service my line speed its cut down 80%.I had my main pc connected to a netgear router with nothing else,and my vpn service worked fine.I dont understand why my main pc is not working with the vpn service.The only configuration I did was to forwarded a port to utorrent,and that was not a problem.It works,and port is open.The problem is my speed is cut by 80%.
View 1 Replies
View Related
Jan 11, 2011
Recently my desktop has experienced very slow download speeds (~0.11 Mbps), however the upload speed appears to be in line (~2.0Mbps). These numbers are taken from Comcast's speed test (my ISP). It is obviously a problem with my PC because everything else on the network (PS3, Laptop) have great signals with no problems. I just recently reverted the Desktop back to its factory state, and everything was working fine for a couple of months. The desktop in question uses Vista 32-bit and the Belkin Basic USB Wireless Adapter.
View 1 Replies
View Related
May 20, 2011
I am in Italy for the summer and brought a usb wireless antenna and have a good neighbor who has given me the password to his adsl router. I have a pc with xp pro and after installing the drivers, I get a very good signal and I get an IP and gateway address, windows shows i am connect but internet will not hook up. I have tried installand reinstalling the software, disable firewall and anti virus to no avail. worked on this for several days . Then I installed the software on my Asus ee net book that has xp home . It connected to internet right away.. I can work like this, but have all my software on the pc and would like to use it for the internet
View 1 Replies
View Related
Mar 22, 2012
I have recently bought a TP Link wireless usb adapter (TL-WN727N). Initially I had some issues with drivers but solved that and my internet was working perfectly for around 2 days. However recently the internet speed has dropped down to extremely low speed periodically for no apparent reason. I can be downloading something at around 700kBps one moment then only have 100B/s the next. [CODE]
View 3 Replies
View Related
Dec 27, 2011
my vista machine connected to the internet. My PC, a Dell studio 540, worked perfectly well on the BT Homehub2 in our last house but now I have very infrequent access.The wireless adapter connects to the network but not to the internet. I get a 'Identifying public network' message with (no customise option). When I use LAN to connect 'unidentified network'.it will connect via wireless, but it seems random and then if the machine sleeps or is restarted it's back to square one.
[code]...
View 12 Replies
View Related
Nov 18, 2012
About 2 weeks ago, my wireless adapter and ethernet port stopped working all of a sudden. When trying to diagnose, I got the Dagnostic Policy error 5. On the basis of other postings on this subject, I have tried restoring an earlier restore point, uninstalling/reinstalling the network adaptors, have tried to run net localgroup Administrators /add networkservice & /add localservice, have tried adding permissions for mpssvc in regedit (DSP parameters). For the hardwired ethernet adapter, it worked but for my wireless adapter all failed so far. Output from sc queryex DPS > 0 is as follows:
SERVICE_NAME: DPS
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 5 (0x5)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 0
FLAGS :
View 1 Replies
View Related
Jul 31, 2012
I have a Windows 7 computer that was built by ibuypower. It's great, but I ordered a rosewill wireless adapter for it and noticed that my connection strength and speed are both pretty terrible. I went on amazon and bought a TP-Link wireless adapter(TL-WN822N). I installed the most recent "V2" drivers from their website and upon disabling my rosewill adapter and enabling the new TP-Link adapter, I was able to connect to the network, but not access the internet. I have tried power cycling the router, using the reset switch on the router, restarting my computer, and a bunch of commands that I found on this site. Is it possible that I have a defective adapter?
Also, some more information: My isp is comcast and the router is from them as well. Here is my ipconfig /all log for the rosewill adapter(internet access):
Quote:
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Trauma
[Code]......
View 10 Replies
View Related
Apr 14, 2012
I have 2 laptops with wireless N adapters that will connect at a maximum of only 72Mbps. I've tried changing the security mode to WPA2 Personal, channel width to 40 MHz only, and 20MHz only. I've changed the network mode to N only. I've updated the drivers on the adapters and ran the update on the E2500 router. I get the same 72Mbps if the laptops are right next to the router. How can I get the connection speed faster?
View 1 Replies
View Related
Nov 11, 2011
I have a question about my Desktop and the Belkin Wireless adapter that I am using for it. There seems to be a problem with my internet connection and I can't figure it out! I'm suppose to have speeds up to 18mbps and I'm only getting up to 5mbps on my Desktop. Now, here's the weird part...when I connect to my wifi on my laptop and cell phone it gets 16mbps. Why this is only happening to my Desktop??? I have the latest wireless adapter driver installed and everything. Is it the adapter or my system??
Wireless Adapter: Belkin F5D8053 N
Windows 7 Home Premium
View 2 Replies
View Related
Jan 6, 2013
I have a Belkin wireless N router and my PC uses a dual band wireless N USB stick. My internet speed when hardwired is 30 MB but when connected using my USB adapter it does not exceed 15 MB. Is there a limit on USB adapters and is there a way to increase the internet speed here?
View 8 Replies
View Related
Apr 21, 2011
I have been trying to speed up my intranet and internet. Have 2 Broadband connections (1 ADSL 2 & BT Infinity - Fibre).
Adsl 2 (up to 10 meg) running D-Link 2680 - 68 mbs wireless 100mbs ethernet best I can achive.BT 2 Infinity (20 - 40 meg) running BT Wireless 2 router - 54 mbs wireless and 100mbs ethernet best I can achieve.Have a TP- Link SG1005D 1000mbs switch.
2 Destop PCs Windows 7 10/100/1000 ethernet card and 10/100 card.
Laptop 10/100 card and Linksys WPC300N wireless 300mbs adapter.
Also WD 1TB (500 mirrored) network storage.
Tried to bridge connections etc but not much luck.
View 4 Replies
View Related
Aug 19, 2012
So, i' m pretty un-satisfied with my WiFi speed so far and i have this laptop which has a wifi adapter ,Atheros AR5B93 Wireless Network Adapter And i' m getting internet from my neighbor above me, and i get in speed test max 2.4MB Download and 0.24MB upload and now i was thinking about a USB Wifi adapter to get more speed and i need some info about these antennas .
View 1 Replies
View Related
Aug 25, 2012
I just brought this belkin wireless usb adapter N150 and it is giving me slow download speed. I checked on Speedtest.net - The Global Broadband Speed Test and it gives me 0.20 mbps it is not going to the max my max is 3.00 mbps it is not the wireless usb adapter because i checked on another computer and it went to the max 3.00 mbps and i putted it in the same location as my computer so than i realised that it was my computer that is giving slow download speed and it can't find much connections.
View 1 Replies
View Related
Dec 23, 2011
I had to change from a WRT300N wireless router which died to a new E2500. I noticed that the speed my computers report that they are connected to the wireless network connection is now 144.5 mps, versus 270 mps with the WRT300N. There is no change in location of the devices or computers. The computers use a WUSB300N adapter. Is there a setting or setup that needs to be changed?
View 2 Replies
View Related
Apr 21, 2013
Region : Ireland
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP :
I have a problem with using wi-fi. I am able to connect to the router with my Samsung Galaxy S3, Galaxy S2 or my iPad but when i try to use the internet it doesn't work. I tried resetting but the problem is still there
View 2 Replies
View Related
Jan 23, 2013
Region : Australia
Model : TD-VG3631
Hardware Version : V1
Firmware Version : TD-VG3631_V1_130108
ISP : iinet
I have set up this modem correctly as it will occasionally sync and internet will be connected for a short time 5-10 seconds then loses sync.Have asked ISP to check line and they say it is fine. I have upgraded to current firmware but same result.I purchased for wireless N and print server features.Have reverted back to 4+ year old Netgear DG834GV which works perfectly with same cabling, filter etc. ISP suggest connect VG3631 on ADSL 1 but if I need to do that I may as well take it back and buy a cheaper wireless AP.I also set my existing Netgear as modem only and connected to EWAN port of VG3631 and it did the same thing (kept dropping connection), this suggests that it is a VG3631 hardware or software problem (completely separate to DSL/Line issues).
View 2 Replies
View Related
Jan 2, 2013
Region : Poland
Model : TL-WR941ND
Hardware Version : V3
Firmware Version :
ISP :
I have a problem with files sharing via wi-fi. I can not share files over the network using wi-fi connections. While the network is the cable connection sharing is available. The network also acts as one computer is connected by a cable to the router and the other via wifi. But if the two computers are working through wifi network does not work. Are there any settings in the router, which can cause blocking calls via wifi?
View 1 Replies
View Related
Mar 17, 2011
I live in the tampa bay area, I have bright house (BHN) as my service provider, which provides a Road Runner Lightning (40/5) package. I previously used BHN's top tier (20/2) back in July (and prior) with no problems.
After converting to Lightning in August of this year (2010). Of course, BHN (and every other provider) wants to force a modem/router down your throat, so I had them bridge it (in short, turn it into a dummy modem with no routing). I had an SMC branded modem gateway at the time. I work from home 2 days a week (so I can spend more time with my kids during morning, lunch, right after work) and this requires me to use QoS to ensure my VOIP work calls don't get dropped, if the family is watching youtube videos or watching netflex.
My network was as follows SMC Modem >WAN IP>>WAN Port>>D-link DIR-655>>Switch Ports>PC1, PC2, PC3
Everything seemed fine (from a usability stand point) till about 2 weeks ago when my upload speed seemed to grind to halt. Normally I was able to upload about 200-300K per second, and I noticed this dropped to about 45K per second during a drop box upload. First thing I did was power cycle both my modem and router (in the proper/usual order). After they both come up, I start using speed test to find out what my upload speeds were. I was getting about 39Mbps down, but only .56Mbps up still. I factory reset my router.... test, similar speeds. Power cycle all computers (just in case), and then modem/router. Tested, similar speeds. Updated the firmware to the latest. Same issue
Called BHN customer service, they factor reset it, but it wasn't in bridge mode. If I by passed the 655, in factory mode (non bridge mode) upload speeds returned to better than expected states. If I bridged the cable modem, upload speeds seemed to crash.
Had BHN replace the modem, seemed fixed for a day, then issue came back. Had them come back out and replace it again, this time with a Motorolla Surfboard modem... same issue. Fine during factory reset, however after they bridge the modem, upload speeds were fine. Told BHN I would take it from there.. Connected up the DIR-655, and upload speeds crashed again. (.6Mbps). Called D-Link Support, and the Chinese English speaking rep seemed to not be listening to me and tried to have me adjust my MTU as well as Wireless settings. Long story short... the rep was a level 0 id10t and I hope D-link will consider hiring better employees/contractors. So I was all about to give up and replace it with a DD-WRT capable router (which it takes me a lot to want to swap hardware), when I discovered the wan shaping was on. Which I thought to myself... nah... QoS has never messed up before... why would it be the cause. Turned off wan shapping... and voila. Issue seemed to be insta-resolved.
Unsatisfied with that... I decided to dig a lil deeper. I turned on Wan shaping again, but decided to set the settings manually instead of auto detect.
Here are the settings I used... (Advanced Tab>QoS)
Enable Traffic Shaping - Checked
Automatic Uplink Speed - Unchecked
Manual Uplink Speed - 5000
Connection Type: Cable or Other Broadand Network
Enable QoS Engine - Checked Automatic Classification - unchecked (this checked seemed to affect my upload speed by about 5-10% during testing) Dynamic Fragmentation - unchecked (this checked seemed to be the worse enemy for upload speed)
While I know I'm not any network guru (still have to use a subnet calculator for subnetting), I think I did a pretty good job drilling down the issue (once I got passed my service provider replacing modems).
Anyways, I've had overall good luck with D-Link products, even have a 5 port 10/100 switch (all metal) from 1998 that works great. Hopefully, D-Link will just either put more documentation on the web, or hire better employees.
View 3 Replies
View Related
Aug 2, 2012
I am having an issue with my network connection. I have tested the connection itself and it's not a problem on my ISP's end or the connection itself, but seems to be caused by hardware/software errors originating from the computer. It almost appears as if the connection is being capped or the like, because the signal is very strong when I connect to the internet at first, then after a few moments drops (consistently every time I try reconnecting) to an unacceptably low signal level.
View 14 Replies
View Related
Dec 21, 2011
I just set up my 655 and it hooked up to the internet right away. I also connected my x box and wi-fy iphone without a hitch. THen I tried to connect my blue ray player that has a wireless feature. My last dlink router recognized the blue ray without a problem. With the 655, the blue ray can see my router and network, but can't connect, saying their is a dchp issue or I need to fix the IP address. Dlink support told me to upgrade firmware but my version is 2.0, and the only thing I can find is a V1.34.
View 7 Replies
View Related
Nov 23, 2011
I'd like to use my D-Link router as a network adapter to connect a PC to my existing wireless network. how to configure the D-Link router? I'd like to leave the Belkin settings alone as much as I can.
I have a D-Link DIR-615. Hardware Rev. is C1. Firmware Rev. is 3.10NA.
I also have a Belkin F5D8235-4 router. Hardware Rev. is v2000. Firmware Rev. is 2.01.04
View 2 Replies
View Related
Oct 10, 2011
The modem connects to a D-Link DIR-655 which connects to a computer (Vista) and a switch, the switch then connects to another computer (Win7) and an xbox. the problem is that the vista computer will randomly connect and disconnect from the internet/ network. The vista computer also generally runs very slow on the internet. The Win7 computer runs perfectly and there is never an issue, so I'm wondering if the problem has to do with the vista computer not being connected to the switch? It is not an issue with the router, I have tried two already and the same issue occurs.the vista computer is running with a Gigabyte GA-EP45-UD3R which has a Realtek 8111C LAN chipset.
View 5 Replies
View Related
May 24, 2011
I have a wireless network set up in our small office. I just bought the DIR-655 and installed it (did have a very old Netgear router). I currently have two wireless printers, a MAC and a couple of iPhones that can connect to the network and internet. My desktop is plugged in and also connects fine.The BOSS just came in with his fairly new Win7 laptop and I connected it to the network, however, no matter what I try, it won't connnect to the internet. I can see his laptop in the network, it can see my computer and it says that it is connected to the network. It also says that it is not connected to the internet. I ran the troubleshooting (by clicking on the "X" between the network and the internet in the Network and Sharing Center) and it said it couldn't find the problem. The Win7 laptop has no problems connecting to the old network, nor any others that it encounters.
View 1 Replies
View Related
Jan 5, 2013
My Dir-615 E1 5.01 works fine, daughters Iphone, laptop connect fine. My Droid Max android phone connects with no problem but does not load web pages or sites. Phone does work great at other wifi spots just not at home with this DLink. My last android phone acted the same way, cannot use wifi at home! Not a password issue cause it does connect and has strong signal.
View 3 Replies
View Related
Aug 15, 2009
Region : India
Model : TL-MR3220
Hardware Version : V1
Firmware Version : TL-MR3220_V1_121123
ISP : Reliance Netconnect +
I have reliance ZTE AC2726 modem and i am trying to connect it with using the latest firmware version 121123. Router is able to detect the modem but when it tries to dial the connection is not established and reset the router after retrying 2-3 times. It was working perfectly fine earlier when i was on 120309 firmware version. So i tried downgrading my firmware version to 120309 and again it started working. I am not sure why the latest firmware version is not working with this device. Ideally the new firmware versions for a router should fix the existing issues and all the modems which were working earlier should work.
View 9 Replies
View Related
Nov 17, 2012
How can I go about checking the link speed of my wifi on my iPhone? Android devices show it as standard when you click on the network you're connected to and Windows shows it via Task manager/Wireless properties.
View 7 Replies
View Related
Jul 14, 2011
I recently picked up this router on clearance to replace a Linksys WRT54GS in the hopes that I would get better speeds for streaming multi-media (NETFLIX). I live in a single story home with a room over the garage (this is where my cable modem and Dlink router are located). To increase signal strength throughout my house I had previously purchased an EnGenius ERB9250 range extender (which supports 802.11N 300mbs), now all my wireless devices show full bars anywhere in the house. Unfortunately when I test my connection to the wireless network I seem to only be registering about 5 - 8 mbs. This really isn't any better than I was getting with my older Linksys, but I thought the Dlink could do up to 150mbs. I have verified that both my range extender and the router are configured correctly, and have tried disabling the QoS (read somewhere that it might drop signals). So far nothing I do seems to increase performance. Is this normal for this router? Am I being unrealistic in trying to get better performance? Is there anything special I need to do to increase performance? I downloaded several wireless sniffers and have set my router to wireless channel 6 as this is the least used by my neighbors (actually shows as 6+2).
View 11 Replies
View Related
Mar 3, 2011
I have a D-Link wireless adapter (DWL-G122) that I have been trying to install on a Windows XP computer. After various uninstalls and reinstalls of the drivers and programs that come with it, I have found currently the best way to get it to work is leave the D-Link programs uninstalled and have Windows install the driver itself.The problem is, it doesn't seem to keep the drivers on restarting, so every time the computer is restarted, it must be installed again. This is not ideal.It occasionally worked when I installed from the CD, but the D-Link programs that would install with the drivers created problems of their own.
View 2 Replies
View Related
Sep 8, 2012
Had this Dlink Air plus router with an wireless adator set up on with a PC running win Vista, but as the PC had problems I tried it with older XP PC and it worked fine for about 5 weeks but tonight the wireless adaptor on my desk has stopped flashing and I could not access the internet so I decided to try the Vista PC and it works fine on there, while it can get me online I would still like to fix the D Link to work with the older PC again, what is the problem as it is a faster more reliable PC
View 5 Replies
View Related
Dec 9, 2011
I have a D-Link DWL 520+ on my motherboard I can't get the wireless adapter to gain the IP address. I have tried to reboot and uninstall and reinstall, and repair. I have tried the hardware manager and several drivers from around the world (all being the same). Again the adapter can see the internet and connect with my router but it will not pickup the IP address. How do I get the wireless adapter to see the IP address?
View 1 Replies
View Related
May 28, 2012
i have a desktop with a wired Ether port, and want to use the DIR-655 to access the wireless LAN used by the rest of my household. this should be possible, right? i've seen discussion of the DIR-655 as a bridge and repeater, but can't figure this one out?
View 1 Replies
View Related
Mar 20, 2011
Just bought a new DIR-655 Xtreme N Gigabit Router 3 days ago. Have 5MB fiber and consistently receive 4.7-5.0MB when connected directly to my laptop (windows XP, Dell wireless 1390 WLAN Mini-card, 802.11g only). I followed the CD instruction to set up the router and when connected wirelessly I consistently get 2.4 - 2.7 MB. When I connect a cable from the router to my laptop, I get the 4.7 - 5.0MB that I get when connected directly. I've tried a second laptop (Vista, 802.11g only) and when connected wirelessly I get 4.7-5.0 MB. A friend of mine who has a laptop (Windows 7, g/n) also connected at 4.7-5.0 MB.
View 1 Replies
View Related
