D-Link Air Plus G Wireless Adapter Not Flashing
Sep 8, 2012
Had this Dlink Air plus router with an wireless adator set up on with a PC running win Vista, but as the PC had problems I tried it with older XP PC and it worked fine for about 5 weeks but tonight the wireless adaptor on my desk has stopped flashing and I could not access the internet so I decided to try the Vista PC and it works fine on there, while it can get me online I would still like to fix the D Link to work with the older PC again, what is the problem as it is a faster more reliable PC
View 5 Replies
ADVERTISEMENT
Mar 21, 2013
Region : UnitedKingdom
Model : TL-WR841N
Hardware Version : V7
Firmware Version :
ISP : Virgin Media
The sun sign on the modem has been flashing for a couple of days but I am still getting the internet. Is there anyway I can find out why its doing this? I have tried rebooting but still starts to flash.
View 4 Replies
View Related
Jan 21, 2013
Region : Others
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :
My router is not working and only all lights are flashing everytime after interval of 2 seconds.
View 1 Replies
View Related
Jan 16, 2013
I was replacing a bad cap on my DIr-615 and noticed I have the 635(or 625?) board except there is no USB port or 3rd antenna soldered on.I soldered on a 3rd antenna from an old linksys router but don't know if it's working.If I flash the DIR-635 FW(I'm using DD-wrt) will it work fine and enable the antenna to work? Will having a third antenna even be beneficial at all for range and signal strength?I plan on flashing DD-wrt firmware for the 635 if that makes any difference.
View 3 Replies
View Related
Jun 6, 2012
How to flash a DIR-601 Rev B1 with any of the custom firmwares out there? I've tried all of them this morning and haven't had any luck. I set the router to recovery mode and tried openwrt, dd-wrt, tomato, and gargoyle. I tried with chrome, firefox, ultra simple web browser, and ie 8. Every attempt resulted in "Upgrade Failed". I know Rev A1 is supported by DD-WRT, just sucks newegg sent me a B1. Looks like several other routers run similar hardware, so it's got to be doable.
View 5 Replies
View Related
Jan 4, 2011
I read somewhere this is to show that the connection is unstable? My modem works fine, and it works fine being plugged directly into my PC.
But going through the modem, I am noticing some drops in speed and spikes of high latency. This icon - the little earth/internet icon - has never flashed for a long period of time before. I've power cycled it (unplugged for over 5 mins) and it persists.
Does it need a firmware upgrade? Is it something I did? Faulty hardware?
View 4 Replies
View Related
Mar 5, 2011
what should to do if ever or incase something happen during flashing firmware.like power turn off, or you quit the installation, or wrong .bin file.what i did is upgrade the firmware dlink dir 615 3.03 ww c2 to ddwrt factory.bin but before that i have save the original .bin from 192.168.1.1 for incase restore original setting.i did not follow the instruction that get latest firmware from dlink but what i did is restore or use emergency to reback the 3.03 ww c2 .bin from my dlink that i was save from original setting. and it didnt work out it failed the router totally stopped working and functioning. only the dlink name light is on. even the reset button dont work or dont blink.what should we do for this kind of fault is there another way to return the setting back? no ethernet and wifi so no way of communicating with router. the router ethernet and wifi has stopped working. but the computer homw network is detecting the router whenever i plug it in computer through Ethernet but the local area network when plug to router is disconnected. the router wifi is not blinking either.
View 1 Replies
View Related
Nov 23, 2011
I'd like to use my D-Link router as a network adapter to connect a PC to my existing wireless network. how to configure the D-Link router? I'd like to leave the Belkin settings alone as much as I can.
I have a D-Link DIR-615. Hardware Rev. is C1. Firmware Rev. is 3.10NA.
I also have a Belkin F5D8235-4 router. Hardware Rev. is v2000. Firmware Rev. is 2.01.04
View 2 Replies
View Related
Feb 7, 2012
We have two WAP4410N access points that are behaving identically. When connected without an ethernet connection, the Power light comes on and stays on. However, as soon as you attach an ethernet cable, whether it's attached to anything on the other end or not, the LEDs on the devices start blinking - first the Power light, then the Wireless light, repeatedly. They continue to do this, even when the ethernet cord is removed.
In addition to this, I cannot ping the IP, even when the WAP directly connected to a PC in the same subnet. I tried a hard reset, but I can't even ping the default IP.
Both WAPS have a very basic configuration. Neither of them are running upgraded firmware.
View 1 Replies
View Related
Mar 3, 2011
I have a D-Link wireless adapter (DWL-G122) that I have been trying to install on a Windows XP computer. After various uninstalls and reinstalls of the drivers and programs that come with it, I have found currently the best way to get it to work is leave the D-Link programs uninstalled and have Windows install the driver itself.The problem is, it doesn't seem to keep the drivers on restarting, so every time the computer is restarted, it must be installed again. This is not ideal.It occasionally worked when I installed from the CD, but the D-Link programs that would install with the drivers created problems of their own.
View 2 Replies
View Related
Dec 9, 2011
I have a D-Link DWL 520+ on my motherboard I can't get the wireless adapter to gain the IP address. I have tried to reboot and uninstall and reinstall, and repair. I have tried the hardware manager and several drivers from around the world (all being the same). Again the adapter can see the internet and connect with my router but it will not pickup the IP address. How do I get the wireless adapter to see the IP address?
View 1 Replies
View Related
May 28, 2012
i have a desktop with a wired Ether port, and want to use the DIR-655 to access the wireless LAN used by the rest of my household. this should be possible, right? i've seen discussion of the DIR-655 as a bridge and repeater, but can't figure this one out?
View 1 Replies
View Related
Jan 26, 2012
Recently I bought a TP-Link WN822N and I had recently had this annoying problem with my adapter suddenly it disconnects but it mostly happens when I'm gaming so I'm clueless what the problem is. I tried to change the channels in my router in case it was any interference but no luck there. I also checked if it was just my "internet" but the internet went smooth. Also I did watch over the connection and it did suddenly change name to another one. It was the same network but it change to NetworkProfile, ain't sure if that's the problem though. I also tried to install a new driver over and over but no solution. My old adapter was just fine and there was no disconnects there before I got an upgrade which didn't seem to be good investment because of the disconnects. The disconnects can happen between 10-20 minutes before it occurs.
View 6 Replies
View Related
Aug 26, 2012
I have a new wireless router (new network, entirely). I used to get intermittent "network access denied" messages. Now, I get intermittent connectivity loss: "No internet access." I typically just right click and troubleshoot. The problem is solved and I get the following message: "Problem with wireless adapter or access point." Once fixed, things go on well for a random time (never more then a day). Then, however, they just fall apart.
View 9 Replies
View Related
Aug 3, 2011
No matter what I try, I cannot get the DIR-655 to connect to my Xbox 360 Wireless N Adapter with N, only connects with G. If I use N only mode, it won't connect at all, even if I manually input the settings. Setting the security to WPA2 Only and setting the Cipher Type to AES doesn't work.
Hardware Version : A3
Firmware Version : 1.35NA
802.11 Mode : Mixed 802.11n and 802.11g
Enable Auto Channel Scan : Checked
Transmission Rate : Best (automatic)
Channel Width : Auto 20/40
Visibility Status : Visible
Security Mode : WPA-Personal
WPA Mode : Auto (WPA or WPA2)
Cipher Type : TKOP and AES
View 14 Replies
View Related
Feb 10, 2011
I have a DLINK DIR-615 wireless n router and recently bought the wireless n network adapter for the xbox 360.When I put my router to mixed mode n,b,g the xbox connects fine to the router.As soon as I switch the router to n only mode the xbox cant connect to the wireless network.My laptop which is also wireless n connects fine on wireless n.It sees the network but cant connect to it.btw. I have switched all security off on the wireless to try and test this.
View 7 Replies
View Related
Jul 19, 2012
I have recently bought a wireless N 150 usb Dlink adapter, i have installed the software and have conected it to my router using WPS (I do not know the passphrase). The adapter is working excellent but when I added the adapter, my old SSID (Dlink) got switched to Dlinkelb7. Dlinkelb7 has full bars when the old Dlink only comes up so often with one bar. Since the switch of Dlink to Dlinkelb7 my xbox 360 adapter has a very hard time connecting to Dlink and it will not connect to Dlinkelb7 because it needs a passphrase. My router is also Dlink Model DIR-615.
View 6 Replies
View Related
Feb 22, 2011
I switch to a new internet provider. which is wireless[Frontier]. my printer is dell V715w the orange light is flashing. provide detailed info to correct
View 1 Replies
View Related
Apr 13, 2012
My internet has been dropping out over and over. Im connected via ether cable on my desktop with windows seven to my belkin router however on the router the wireless icon is flashing orange indicating something wrong. I rang my internet provider and they said its not them, when I troubleshooted the problem it came up with DNS server isnt responding. I tried looking through posts and tried restoring my router to factory default but nothing has worked.
View 14 Replies
View Related
Nov 6, 2010
The power light keeps flashing. I tried to download the firmware, but when I click on the link it says the page cannot be found.
View 9 Replies
View Related
Aug 20, 2011
I just bought this Linksys E3000 high performance router and all it does is have the LED Power light flashing constantly. I've tried resetting it and leaving it unplugged for a few hours but nothing works. When I try to use the installation software it gets to 25% then says it couldn't find any network
View 9 Replies
View Related
Jun 22, 2012
Reset button pushed in, unplugged won't reset it. I get my default name on connections but it's not showing as available connection.
View 7 Replies
View Related
Feb 6, 2011
I got high speed internet last week and have very little understanding of networking. I think I need either a Wireless Access Point, Bridge or Converter. What I'm trying to do: I currently have a Linksys E1000..I have two computers that access this point via built in adapters in the computers. In another room are my gaming consoles and television that I would like to hook up to the internet as well. Is there a wireless adapter that will pick up my Linksys E1000 signal and let me plug ethernet cords into it so my consoles and television can access the network?
View 2 Replies
View Related
Dec 31, 2012
Having trouble with the TP-Link WN722N that I bought from Newegg. It doesn't show any networks on my desktop that runs on Win7. Took the drivers straight from the CD. It works fine on my other laptops and desktop.
View 4 Replies
View Related
Dec 30, 2012
the problem is that I'm suffering from ping spikes. When I ping my router it looks something like this:
C:UsersNiklas>ping 192.168.1.1 -n 10
Skickar ping-signal till 192.168.1.1 med 32 byte data:
Svar från 192.168.1.1: byte=32 tid=991ms TTL=64
Svar från 192.168.1.1: byte=32 tid < 1 ms TTL=64
Svar från 192.168.1.1: byte=32 tid=2944ms TTL=64[code].....
View 5 Replies
View Related
Aug 17, 2012
I would like to know if the D-Link DWA-525 Wireless N 150 Desktop Adapter [URL] is compatible with my ASUS P6X58D-E motherboard ?Its a PCI card, and even my mobo had the PCI 2.0 slot, but i happened to see the photo of the card and it seemed to have two gaps in its PCI connector,]
View 8 Replies
View Related
Jan 6, 2013
I am having a problem with my ea4500 several times a day the cisco light flashes and I loose internet connectivity. I have tried resetting the router by the reset button and changed ssid name, making two different one for each band, and still I am having a problem. I have read where it could be a firmware update, I have updated (using current version)
View 6 Replies
View Related
Nov 30, 2012
so my xbox cannot connect to my router via wifi..the password has been tried and tried and restarted and to no avail.. i look towards my model F6d4230-4 and the light labeled "wireless" is flashing red. and yet my laptop connection is just fine. how do i fix the flashing red "wireless light" on my model: f6d4230
View 1 Replies
View Related
Mar 13, 2011
We have a cisco services contract with IBM that supplies us access to the usb drivers, firmwares etc, and we have a Cisco 5508 6.x running ~30 Cisco 1252's, some 1231's and (potentially) some 1262's once the firmware update is done.
We have a base-count license(permanent) of 50AP's, no expiry
So I guess my questions are:
1) When flashing the new firmware - do the licenses require any sort of modification, or will they work as per normal
2) Are any serial numbers or codes required to be entered once the 7.0.98 firmware is installed?
3) I assume that the old firmware/config becomes 2nd in line to the primary boot option of the firmware during boot process?
View 6 Replies
View Related
Aug 18, 2011
i just bought and installed tp link wireless G usb adapter TL-wn422G.
i was tring to connect to the internet but after about 30 second the connection to the internet was terminated, and i need to unplug the device and replug it , in order it will work again (for about 30 seconds more).
i have an edimax router and all my other devices are connect perfectly (laptop, iphone , galaxy s)
View 6 Replies
View Related
Mar 24, 2011
was working fine with my new router DSL-2730U D-link router and using it's wireless connectivity with G/N mixed mode..and i noticed that the range is so low so i decided to switch to N-only mode and when i did that i couldn't connect at all!..the router uses N-150 btw.
View 8 Replies
View Related
Oct 6, 2011
Have installed a TP-Link TL-WN722N wireless USB adapter.O/Sis Win XP SP3.Np options are showing for Wireless networks under Network Connections.Wireless Zero Conifguration is on.When I run a QSS app I can see neighbours network but not my own (My equipment doesn't support QSS) so the card and driver are working.
View 7 Replies
View Related
Oct 30, 2011
I am making my wireless network with Wireless router DIR-600 and DWA-525 desktop adapters for my office. I created a most secured type of network WPA2. And I have to create profile for DWA-525 desktop adapter to connect to my network and it requires the network secret key to connect. But This secret key is viewable from the "Network connection manager" when one can click on modify network and click on "Show text in the password field" by everyone using this computer (I mean by all other office staff). I don't want to let any one know my wireless network secret key. Is there any way to protect the key while having the computers automatically connected to wireless network. More information is below
Model: DWA-525
Hardware Version: A1
Firmware Version: 1.10
Operating System: Windows 7
Service Pack: 1
View 1 Replies
View Related
