Link Between Computer And Wireless Adapter Is Broken
Aug 26, 2012
I have a new wireless router (new network, entirely). I used to get intermittent "network access denied" messages. Now, I get intermittent connectivity loss: "No internet access." I typically just right click and troubleshoot. The problem is solved and I get the following message: "Problem with wireless adapter or access point." Once fixed, things go on well for a random time (never more then a day). Then, however, they just fall apart.
View 9 Replies
ADVERTISEMENT
May 30, 2012
My laptop's wireless network adapter is not working Eventually I managed to re install the driver but that did absolutely nothing and now it won't connect unless I have the ethernet cable plugged in. It also no longer will tell me there is a problem with the adapter, it just refuses to bring up any wireless connections. My laptop is a Dell N5110.
View 1 Replies
View Related
Mar 15, 2012
We can not get on line with our home computer (dial-up). The computer dials out, the modem at our ISP picks up and then hangs up - Error 720.[code] The last two were installed by Avira Antivirus, a program which we have uninstalled.Can I download support files for a network adapter? Windows XP SP3
View 3 Replies
View Related
Sep 21, 2011
I recently bought the D-link DWA 556 wireless adapter. I tried installing it but the computer couldn't find it in the device manager. I tried 3 different slots and I had the same problem each time.
I called tech support and he said that my motherboard must not be compatible with the card. I don't think this is the case but it was the only advice he could give me. I have an MSI P67A-G45 board. I removed all drivers from my previous card before installing the DWA 556 because I heard they can clash with each other.
View 6 Replies
View Related
May 22, 2012
Looking at getting an older second computer onto the internet. We have a wireless connection on the primary computer so I was looking at the TP-Link TL-WN321G USB network adapter, or the TP-LINK WN350GD PCI network adapter.The end goal of course is to get the old computer onto wireless, but not sure what the best way to do it is. I'd think the motherboard would accept the PCI card though we do somewhat lack USB facilities. The computer uses a USB hub which I'm not sure if it would impact on internet speeds at all.
View 3 Replies
View Related
Feb 23, 2011
i have already installed this, but it stop working so i unplugged it, now cant find the CD
View 1 Replies
View Related
May 15, 2010
Upgrading the firmware from 1.11EU to 1.21EU and 1.31EU has introduced a problem with multicast (IPTV) streams. I have enabled multicast streams and it seems the router no longer forwards a specific address range, in my case 239.139.128.* on port 1234.
I have checked: Streaming from 233.81.233.* works in 1.11EU, 1.21EU and 1.31EUStreaming from 24.1.3.* works in 1.11EU, 1.21EU and 1.31EUStreaming from 239.139.128.* works only in 1.11EUUsing IGMP proxy on Linux I have checked the stream at 239.139.128.* are available as to be sure the DIR-655 is not forwarding them. I see a lot of forum messages stating IPTV streaming is broken since firmware 1.11. It is however working for me in 1.31EU but only for certain address ranges. Can anything be configured to allow 239.139.128.* to work? Because my TV provider uses the 239.139.128.* range for half the IPTV channels I need to get this working.
Related to this, is there page listing known bugs for the DIR-655 and roadmap for future firmware releases?
View 2 Replies
View Related
Nov 30, 2012
my mac adress is blouck frome the roter i am change my mac address ip address but not conctin the same roter .and conect to other routers.
View 1 Replies
View Related
Feb 1, 2012
I have an Airlink wireless Adapter and Window 7 on my computer. Why does it keeps disconnecting?
View 1 Replies
View Related
Jan 17, 2013
cannot find wireless adapter in my computer windows 7
View 1 Replies
View Related
Sep 1, 2012
Computer unable to detect wireless adapter
View 1 Replies
View Related
Jun 15, 2012
I recently entered the realm of wireless networking for my desktops and was able to connect my personal desktop successfully. Unfortunately, the other desktop I really need to make wireless is having difficulties. The computer never shows the message that a new device is discovered/installed. The adapter shows up under hardware devices and functioning properly but this is not the case. I installed the driver from the included CD but when I use Windows to troubleshoot, it says that the driver and adapter aren't working. When trying to set up a new network, I get a grayed-out wireless icon in the system tray and can't proceed. I disabled the firewall and antivirus so I could start over, uninstalling the driver, restarting and installing again.
View 12 Replies
View Related
May 2, 2012
can you use a Mini USB WiFi Wireless Adapter LAN Network Card on a desktop computer
View 4 Replies
View Related
Apr 25, 2011
I have an HP SR2170NX desktop set up via DSL and cable to an ATT gateway router that enables wireless for my roaming with my laptop. The laptop works wirelessly even when the cable between the router and desktop is unplugged and the desktop turned off. I would like to equip the desktop with a Cisco-Linksys WMP54G Wireless-G PCI Adapter or similar PCI-card to allow for elimination of the cable between the router and the computer.
View 2 Replies
View Related
Aug 25, 2012
I just brought this belkin wireless usb adapter N150 and it is giving me slow download speed. I checked on Speedtest.net - The Global Broadband Speed Test and it gives me 0.20 mbps it is not going to the max my max is 3.00 mbps it is not the wireless usb adapter because i checked on another computer and it went to the max 3.00 mbps and i putted it in the same location as my computer so than i realised that it was my computer that is giving slow download speed and it can't find much connections.
View 1 Replies
View Related
Mar 24, 2011
I recently upgraded my computer (not laptop) from Windows XP to Windows 7-32 bit. I redownloaded and installed Network Magic, Linksys Wireless Manager and my WUSB600N adapter properly (I hope). Now everything was working fine, I was able to get onto my network through the adapter but today I noticed that the Linksys Wireless Manager seemed to not connect to my network, instead my computer some how did it without the wireless manager. Now when I tried to connect to a network through the Wireless Manager it said Error: 211 and said My Adapter may not be installed properly and told me to remove the adapter and attach it back after 20 seconds. I tried that but again my computer connected to the network STILL through the computers own manager not through the Linksys Wireless Manager. That was still saying Error 211. So the problem really is that the Linksys Wireless Manager wont detect my adapter but my computer is still able to detect it and connect to my network.
View 4 Replies
View Related
Jul 24, 2012
Sometimes I cannot connect to the router after my computer has been to sleep. This has occurred on different routers. I can still see the network, but am told I cannot connect when attempting to connect to it. Restarting/shut down does not solve the problem - I have to restart the router itself, and then my computer will reconnect automatically. Other computers/devices will be unaffected by this and maintain a connection the entire time. Atheros AR5B91 Wireless Network Adapter using Windows 7 Service Pack 1.
View 2 Replies
View Related
Jun 5, 2011
I have just installed a Linksys WPM600N Wireless Adapter. I am trying to configure the adapter to wake the computer from standby but the option is greyed out in the device manager properties box. how I can configure this adapter to wake the computer out of standby?
View 1 Replies
View Related
Dec 15, 2012
I have an older computer (hp compaq) that was wiped clean and windows xp professional (version 2002 service pack 3), Internet explorer and Microsoft were installed. I took the USB wireless adapter (belkin 54g usb network adapter, which stills works on my old computer) and installed onto the new one. It shows good strength but is limited or no connectivity and will not allow any Internet access. ipcong/renew, win socket commands and all my settings are correct.
View 1 Replies
View Related
Nov 23, 2011
I'd like to use my D-Link router as a network adapter to connect a PC to my existing wireless network. how to configure the D-Link router? I'd like to leave the Belkin settings alone as much as I can.
I have a D-Link DIR-615. Hardware Rev. is C1. Firmware Rev. is 3.10NA.
I also have a Belkin F5D8235-4 router. Hardware Rev. is v2000. Firmware Rev. is 2.01.04
View 2 Replies
View Related
Mar 3, 2011
I have a D-Link wireless adapter (DWL-G122) that I have been trying to install on a Windows XP computer. After various uninstalls and reinstalls of the drivers and programs that come with it, I have found currently the best way to get it to work is leave the D-Link programs uninstalled and have Windows install the driver itself.The problem is, it doesn't seem to keep the drivers on restarting, so every time the computer is restarted, it must be installed again. This is not ideal.It occasionally worked when I installed from the CD, but the D-Link programs that would install with the drivers created problems of their own.
View 2 Replies
View Related
Sep 8, 2012
Had this Dlink Air plus router with an wireless adator set up on with a PC running win Vista, but as the PC had problems I tried it with older XP PC and it worked fine for about 5 weeks but tonight the wireless adaptor on my desk has stopped flashing and I could not access the internet so I decided to try the Vista PC and it works fine on there, while it can get me online I would still like to fix the D Link to work with the older PC again, what is the problem as it is a faster more reliable PC
View 5 Replies
View Related
Dec 9, 2011
I have a D-Link DWL 520+ on my motherboard I can't get the wireless adapter to gain the IP address. I have tried to reboot and uninstall and reinstall, and repair. I have tried the hardware manager and several drivers from around the world (all being the same). Again the adapter can see the internet and connect with my router but it will not pickup the IP address. How do I get the wireless adapter to see the IP address?
View 1 Replies
View Related
May 28, 2012
i have a desktop with a wired Ether port, and want to use the DIR-655 to access the wireless LAN used by the rest of my household. this should be possible, right? i've seen discussion of the DIR-655 as a bridge and repeater, but can't figure this one out?
View 1 Replies
View Related
Sep 30, 2012
Generally works on wireless Guest network. Only allows one IP on wired or wireless. Using latest cloud firmware.
Instead of giving out the 192.168.1.100-150 as configured. It will give out from the cable modem (i think) 192.168.100.x
Seting static IP on computers works fine.
View 9 Replies
View Related
Jun 22, 2012
I have a WLC5508 and 25 LAP 1041. I use two wifi, one with RADIUS for data and other with wpa-psk for voip. The problem is the voip conectivity is broken.How can i improve the handover?
View 11 Replies
View Related
Oct 23, 2010
I have tried to upgrade from 2.0.2.1 ever since 2.0.3.3 was released back in July. The firmware image file has remained the same, so I don't think they've ever changed it from the original July release.The download and installation go fine, I even reset to factory defaults. The problem is that several menu selections are broken, and don't allow you to save your choices, i.e, you can't even rename your SSID. You can type it in a Apply, but the fields just reset. I figured this would be fixed with a minor update to 2.0.3.3, but we are now several months since original release and nothing has changed. I have tried this firmware at least three times now. I have not bothered lately, because I don't want to waste another 30 minutes trying it and reverting back to 2.0.2.1 if this newest firmware is not going to work.
View 3 Replies
View Related
Jan 26, 2012
Recently I bought a TP-Link WN822N and I had recently had this annoying problem with my adapter suddenly it disconnects but it mostly happens when I'm gaming so I'm clueless what the problem is. I tried to change the channels in my router in case it was any interference but no luck there. I also checked if it was just my "internet" but the internet went smooth. Also I did watch over the connection and it did suddenly change name to another one. It was the same network but it change to NetworkProfile, ain't sure if that's the problem though. I also tried to install a new driver over and over but no solution. My old adapter was just fine and there was no disconnects there before I got an upgrade which didn't seem to be good investment because of the disconnects. The disconnects can happen between 10-20 minutes before it occurs.
View 6 Replies
View Related
Aug 3, 2011
No matter what I try, I cannot get the DIR-655 to connect to my Xbox 360 Wireless N Adapter with N, only connects with G. If I use N only mode, it won't connect at all, even if I manually input the settings. Setting the security to WPA2 Only and setting the Cipher Type to AES doesn't work.
Hardware Version : A3
Firmware Version : 1.35NA
802.11 Mode : Mixed 802.11n and 802.11g
Enable Auto Channel Scan : Checked
Transmission Rate : Best (automatic)
Channel Width : Auto 20/40
Visibility Status : Visible
Security Mode : WPA-Personal
WPA Mode : Auto (WPA or WPA2)
Cipher Type : TKOP and AES
View 14 Replies
View Related
Feb 10, 2011
I have a DLINK DIR-615 wireless n router and recently bought the wireless n network adapter for the xbox 360.When I put my router to mixed mode n,b,g the xbox connects fine to the router.As soon as I switch the router to n only mode the xbox cant connect to the wireless network.My laptop which is also wireless n connects fine on wireless n.It sees the network but cant connect to it.btw. I have switched all security off on the wireless to try and test this.
View 7 Replies
View Related
Jul 19, 2012
I have recently bought a wireless N 150 usb Dlink adapter, i have installed the software and have conected it to my router using WPS (I do not know the passphrase). The adapter is working excellent but when I added the adapter, my old SSID (Dlink) got switched to Dlinkelb7. Dlinkelb7 has full bars when the old Dlink only comes up so often with one bar. Since the switch of Dlink to Dlinkelb7 my xbox 360 adapter has a very hard time connecting to Dlink and it will not connect to Dlinkelb7 because it needs a passphrase. My router is also Dlink Model DIR-615.
View 6 Replies
View Related
Sep 27, 2012
I recently "uninstalled" DD-WRT from my router and tried to install the actual firmware for the router, so I went to this page [URL] WRT54G and select version 5. My router is really version 5.1 but I read on this forum that this router works with version 5 so I downloaded it and installed it.
However, this is how my admin page looks like,
And I can't do anything at all. Is there a fix for this? Is there an actual version 5.1 firmware? Or must I switch to a different, proper router?
View 8 Replies
View Related
Mar 7, 2013
I have a TAC case open, but it doesn't seem to be making any progress.I upgraded my 5508 controller from 7.2.111.3 up to 7.4.100.0..Most of my APs are fine. 3500s, 1100s etc.except for 602i APs. The APs associate, they update software etc, but they won't broadcast the WLAN.An interesting thing, on the 602 AP, in the log, I see this:*Mar 06 15:08:12.667: SSID remote, WLAN Profile Name: RemoteOEAP, added to the slot[0], disabled..So the AP is definately talking to the WLC and being pushed the correct WLAN profile.On the controller, the AP shows the the Admin status of the radios is showing DOWN, but the Admin status on the AP itself shows UP
I've done a factory reset on the APs to no avail. I have a 2504 WLC as well that i'm in the process of implementing in a DMZ specificially for these APs, and for testing purposes, I associated the 602 Ap to that WLC as well. This one is running 7.4.100.0 too, same results. It would appear to be a problem with this version of software?
View 6 Replies
View Related
