Linksys Wireless Router :: Wireless N Adapter Connects To E2500 At 72Mbps?
Apr 14, 2012
I have 2 laptops with wireless N adapters that will connect at a maximum of only 72Mbps. I've tried changing the security mode to WPA2 Personal, channel width to 40 MHz only, and 20MHz only. I've changed the network mode to N only. I've updated the drivers on the adapters and ran the update on the E2500 router. I get the same 72Mbps if the laptops are right next to the router. How can I get the connection speed faster?
View 1 Replies
ADVERTISEMENT
Dec 23, 2011
I had to change from a WRT300N wireless router which died to a new E2500. I noticed that the speed my computers report that they are connected to the wireless network connection is now 144.5 mps, versus 270 mps with the WRT300N. There is no change in location of the devices or computers. The computers use a WUSB300N adapter. Is there a setting or setup that needs to be changed?
View 2 Replies
View Related
Aug 3, 2010
I bought a brand-new Inspiron 15R laptop from Dell and the DW1510 Wireless N WI-FI card will only connect at a maximum of 72mbps. I've tried the laptop with two different N certified routers a (D-Link and Belkin). Routers are configured correctly for N speed and within 10 inches of the laptop.
The speed I am experiencing is nowhere near the 300mbps connection speed possible.
View 42 Replies
View Related
Jul 7, 2011
I bought I router today, Linksys E2500 and set it up, for some reason its connected with full strength but the internet does not work on my computer, or any other device connected to the network I established on the router.the interenet still is not working. The modem is fine, as when I disable the wireless connection, the internet works. Yes, I have Sp3 installed.
[code]...
View 3 Replies
View Related
Mar 11, 2011
i'v recently bought a WAG120N for my home and set it up after that i checked that my wireless link speed on my laptop is 72mbps instead 150mbps after a few googling ive found that 150mbps is only avalaible on 40MHz radio band but in setup page i only found 20MHz.
View 2 Replies
View Related
May 20, 2011
I am in Italy for the summer and brought a usb wireless antenna and have a good neighbor who has given me the password to his adsl router. I have a pc with xp pro and after installing the drivers, I get a very good signal and I get an IP and gateway address, windows shows i am connect but internet will not hook up. I have tried installand reinstalling the software, disable firewall and anti virus to no avail. worked on this for several days . Then I installed the software on my Asus ee net book that has xp home . It connected to internet right away.. I can work like this, but have all my software on the pc and would like to use it for the internet
View 1 Replies
View Related
Dec 27, 2011
my vista machine connected to the internet. My PC, a Dell studio 540, worked perfectly well on the BT Homehub2 in our last house but now I have very infrequent access.The wireless adapter connects to the network but not to the internet. I get a 'Identifying public network' message with (no customise option). When I use LAN to connect 'unidentified network'.it will connect via wireless, but it seems random and then if the machine sleeps or is restarted it's back to square one.
[code]...
View 12 Replies
View Related
Feb 10, 2011
I have a DLINK DIR-615 wireless n router and recently bought the wireless n network adapter for the xbox 360.When I put my router to mixed mode n,b,g the xbox connects fine to the router.As soon as I switch the router to n only mode the xbox cant connect to the wireless network.My laptop which is also wireless n connects fine on wireless n.It sees the network but cant connect to it.btw. I have switched all security off on the wireless to try and test this.
View 7 Replies
View Related
Nov 18, 2012
About 2 weeks ago, my wireless adapter and ethernet port stopped working all of a sudden. When trying to diagnose, I got the Dagnostic Policy error 5. On the basis of other postings on this subject, I have tried restoring an earlier restore point, uninstalling/reinstalling the network adaptors, have tried to run net localgroup Administrators /add networkservice & /add localservice, have tried adding permissions for mpssvc in regedit (DSP parameters). For the hardwired ethernet adapter, it worked but for my wireless adapter all failed so far. Output from sc queryex DPS > 0 is as follows:
SERVICE_NAME: DPS
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 5 (0x5)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 0
FLAGS :
View 1 Replies
View Related
Jul 31, 2012
I have a Windows 7 computer that was built by ibuypower. It's great, but I ordered a rosewill wireless adapter for it and noticed that my connection strength and speed are both pretty terrible. I went on amazon and bought a TP-Link wireless adapter(TL-WN822N). I installed the most recent "V2" drivers from their website and upon disabling my rosewill adapter and enabling the new TP-Link adapter, I was able to connect to the network, but not access the internet. I have tried power cycling the router, using the reset switch on the router, restarting my computer, and a bunch of commands that I found on this site. Is it possible that I have a defective adapter?
Also, some more information: My isp is comcast and the router is from them as well. Here is my ipconfig /all log for the rosewill adapter(internet access):
Quote:
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Trauma
[Code]......
View 10 Replies
View Related
Aug 9, 2011
I've been using the E1000 for months. I have 2 iphones, an ipod, a windows 7 netbook and a macbook connected wirelessly to it. It's been set at wpa2/wpa mixed mode all this time without a problem. Out of the blue: no wireless connection on any device. I restarted the modem, router, PC's, phones, etc. I've updated the firmware. The only way I can get a wireless connection is to use wep. How can I get the better security and speed of wpa2 back?
View 4 Replies
View Related
Feb 18, 2012
I put a password on my WRT54GC ver 2.0. After that i couldn't access internet. It keeps authenticating and never connects.
View 2 Replies
View Related
Sep 9, 2011
I have a WRT 160N v2 router. There's 1 computer wired to it, that works fine. Then I have 2 laptops and a pc wireless to it. One laptop is a mac and that seems to be fine, another is a Compaq notebook that has trouble connecting and the pc has the same problem. The signal strength is very good to excellent so thats not the issue. What happens with the pc is, it will connect but at times its only for a few seconds then it disconnects. Sometimes restarting the computer fixes it for a while but it will eventually start having the problem again. It detects the wireless network just fine, and the router's firmware is up to date. I have a feeling that its the settings in the router but im not sure what to change.
View 3 Replies
View Related
May 11, 2012
My WRT160Nv3 appears to be working fine however, I believe there's something wrong with the setup that's making my connection unreliable. All my devices can detect the router, they can connect, but once it comes to surfing on those devices, no pages are loading up despite being connected with excellent signal strength.
View 1 Replies
View Related
Aug 17, 2011
I ordered a linksys E1500 for a home office. There are 3 computers that connect wirelessly: a 8-year-old desktop with a Netgear USB adapter, a 1.5 year old laptop and a 3.5 year old netbook, both with internal wireless cards. The desktop and netbook are running Windows XP and the laptop runs WIndows 7.
The desktop (XP) and laptop (Windows 7) are able to connect with no problem. However, the netbook (XP) is having problems connecting. It is able to connect to the router using the WPA2 key, and says it has excellent signal. However, when I start up an internet browser, it gives me a DNS error for any page I try to access. Connecting directly to the router with a cable works fine.
I got on the phone with Linksys support. They told me the problem was that the computer wouldn't use WPA2, but when I switched to WEP, it didn't work at all! I switched back to WPA2 and have the same problem as before: it connects to the network but DNS error messages for any website I try to access (And I've tried both Chrome and Explorer).
To make things more interesting, I set up a guest network on the router, and the netbook connects fine through that so far!
View 1 Replies
View Related
Sep 5, 2011
I'm currently setting the MAC address filtering for my Linksys E2500 router. I have about 20 devices which i'm allowing to access my router, so i keyed in the MAC addresses into the config page and save setting. But only 16 addresses are registered, the rest refused to register no matter how many times i key in, it just reset back to 00:00:00:00:00:00 after i click on save setting.
View 4 Replies
View Related
Jul 19, 2011
My E2500 is running firmware 1.0.01 build 3.Is there a way to turn off the wireless with this router? I've checked in Advanced Settings via Cisco Connect, and if it's there, I have missed it.
View 3 Replies
View Related
Jul 17, 2006
My lap top and other desktop are able to detect the internet but not my main computer with this router.
View 2 Replies
View Related
Jan 18, 2013
Just set upa new e1200 on my brand new primary PC - connects flawlessly. One other PC in the house and an iphone also connect on the network to the internet with no issues. The problem: My laptop connects to the secure network without prompting for a password,but then does not connect to the internet at all. This same laptop easily connects to the internet via the network as a guest, just as it should. Tried using Easkey, but same result: laptop connects OK to the secure network without a password prompt, but then does not connect to the net.
View 5 Replies
View Related
Sep 21, 2011
there has been issues with this router, and I wonder if any of you have issues connecting to the 5ghz when you wake your pc from sleep longer than an hour. For some reason when I put my computer to sleep at night and wake it up in the morning, my computer will not connect to 5ghz. It will work fine with 2.4, both are set in auto, so I dont see any issues. I did try to put 5ghz to a manual setting; wpa2, 40 mhz, and channel 161. I still get the same results. I am doing something wrong or is the router's 5ghz faulty?Also when is the new firmware coming, I am getting sick of my Harddrive being awake 24/7, its killing the harddrives life span and wasting electricity. I should put this in another post, because they should really change the media server to Wild Media Server or Serviio it would be alot better.
View 7 Replies
View Related
Nov 26, 2011
There's a WRT54G2 v1.5 router in the apartment I just moved in to (belongs to my roommate) which crapped out the other day. My computer and iPod touch both recognize the router's signal and connect to it, but I can't access any Web sites after that (both work fine on other wireless networks). I can, however, access the Web via the cable modem, but when I plug an Ethernet cable into one of the ports on the Linksys router, I have the same problem as when I'm connecting wirelessly. So far, I've tried resetting the router (with the reset button on the back), updating the firmware, changing settings (beacon interval, frag & RTS thresholds....saw that suggested on other forums) & leaving the network unsecured (it's currently WPA2/TKIP & AES, what it was originally).Is it safe to say this router's done for, or is there anything else I can do to resurrect it?
View 1 Replies
View Related
Aug 29, 2011
I have my wireless set up in my house. All other computers and devices can connect and get on the internet fine, except my laptop. I can connect to the wireless routers network but it says local only and wont let me on the internet. I tried using the cd to install the router settings on the computer but it never goes past 25% and gives me this information:Error code: 82BD0119Error description: The adapter connection timeout period expired.Model name: Linksys E1500Model number: E1500Serial number: (Removed)Firmware version: 1.0.01 build 4Operating system: Windows Vista SP 2Software version: 1.3.11027.1Connection type (WAN): DHCPIP address (LAN): 192.168.1.1IP address (WAN): 71.61.221.251Computer IP address: 0.0.0.0
View 1 Replies
View Related
Jul 18, 2012
I have a WRT54G working throughout our home. It has 4 hardwired ethernet connections, and several wireless connections working without any issues. Currently my Droid phone, iPad tablet and 2 laptops connect and get through to the internet via wireless connection.
Today I purchased a new TF700T Asus Infinity Tablet. I'm able to get it to connect to the router, see the network, and the router can see the Infinity Tablet (assigns an IP address), but no internet access.
what tools I can use to see where the traffic from the tablet is being blocked. The log on the router doesn't show me anything. I'm assuming there's a port or ports being blocked by the router, but no idea which ones.
Already tried hard resets and a firmware upgrade to no avail. In fact the latest firmware upgrade (4.21.5) hosed the entire network so I reverted back to 4.21.1
View 2 Replies
View Related
Feb 28, 2013
I am trying to connect to a new VPN using my E2500 router. As soon as I connect, the connection breaks.
View 1 Replies
View Related
Sep 3, 2012
i buy a new e2500 from staples. but when i try to register the product. it shows me "Serial Number you entered is invalid.". i am sure i choose the right product and number to register.. so is that mean some one used it..
View 3 Replies
View Related
Dec 18, 2012
I want to add my E2500 as a second wireless router to cover my entire house.I have a Motorola Surfboard SBG6580 cable modem (Time-Warner) at one end of the house.I added via powerline Ethernet connection a new E2500 wireless router at the other end of the house.The E2500 set-up with all defaults and has the same SSID and Password as the Surfboard cable modem.It seems to work OK, but I wonder about network confusion/interference.Do I have to configure the E2500 in some manner to allow seamless roaming of my wireless devices (iPad, Cell Phones, Netbook)?I had an RE1000 with just the Surfboard, but it did not quite do the trick, and does not like both routers connected at either end.
View 9 Replies
View Related
Nov 23, 2011
How To Reset E2500 Router
View 1 Replies
View Related
Jan 23, 2012
I am trying to setup a WAP with my linksys 2500. I am currently using a Gateway connected to my DSL and am looking to set up the access point through the E2500.
View 1 Replies
View Related
Nov 18, 2011
So, i have a e2500 router and find that every so often, I have to unplug it and reset it because I am losing my internet connection.
View 7 Replies
View Related
Dec 22, 2012
How to set router to use as Slind Box Pro?
View 3 Replies
View Related
Jan 4, 2012
I currently have my E2500 connected via wired LAN (not WAN) port on another router. The E2500 has an LAN IP of 10.0.0.2 and the router has 10.0.0.1 and a dhcp range outside of these. DHCP is disabled on the E2500. I can use my E2500 as a wired access point with no difficulty I plug something in and it calls the router and gets an address, but I can not get DHCP through the wireless of the E2500.
View 2 Replies
View Related
Aug 7, 2011
I have Time Warner as my internet company. I recently purchased a new Linksys Router Mode E2500 because I have been having issues with my old router. My internet was disconnecting sporadically. After connecting the new router, a started getting the same issue. I replaced my internet cable modem to a Cisco 2100 modem (provided by Time Warner). I noticed that the issue keeps happening sporadically which makes me believe it is my Linksys router. Every time a new wireless connection is connected, my modem circuit dies. This happens sporadically.
View 4 Replies
View Related
Dec 27, 2011
I have bought and installed an E2500 router 4 days ago. Installation of router and network using Cisco Connect was easy and without problems. However, after 4 days of usage, not changing anything in the network nor running Cisco Connect or accessing the web interface, I tried to start Cisco Connect and got the message "Cannot access your router".Internet is running, router is accessible via 192.168.1.1 in a browser window, Cisco Connect also works fine on my laptop.The only solution I found on this forum is: reset your router and reinstall Cisco Connect.and then every 4 days resetting my router and reinstalling the software?
View 4 Replies
View Related
