D-Link DIR-825 :: Host Name Invalid When Reserving An IP Address?
Apr 26, 2011
Issue: When I attempt to save the changes I made to the DHCP reservation list I get an error window that reads:
http:\201.201.201.201 (my internal router IP address - changed from 192.168.0.1)
Host name Invalid I have a DHCP Range setup as 201.201.201.100 to 201.201.201.199
I'm attempting to reserve an IP address of 201.201.201.199 for one of the computers on my network.
I can see the computer on the dir825 router and am connecting to it through a linksys wrtgs working as a repeater bridge running dd-wrt. The computer in question is successfully getting it's IP address from the dhcp server on the dlink router.
The dir825 is running 2.05na firmware. Why am I unable to reserve an IP address?
View 3 Replies
ADVERTISEMENT
Jul 4, 2012
I installed the 2.06NA on my DIR-655 router and now I'm having problems adding mac addresses to the network filter. The message is "Invalid MAC address". Of course, it doesn't tell me which entry is invalid and I have a number of them. After further checking.. I noticed that one of the MAC addresses is indeed invalid and when I remove it I still get the error message?
View 1 Replies
View Related
Jun 3, 2010
I am unable to reserve an IP for my iPad, i.e. add my ipad to the "DHCP RESERVATIONS LIST". I get a pop-up saying "The MAC Address entered is invalid." The address starts with "D8". My understanding is most start w/ "00". The router says my firmware is up-to-date (3.01).
View 11 Replies
View Related
Dec 29, 2009
I had no problem running both 2.4 and 5.0 Bandwidth. With WiFi password and without. It does it's job. The 2.4Ghz Range Plus works. I have set up the router on the 2nd floor at the highest it can go. And everyone get's full bars all over the house. I even get 4-5 bars outside in my car on my phone.
The only issue I have with this thing is a damn new netbook I got for Christmas with a Mac Address starting with 0C-EE-E6-XX-XX-XX. The Router finds the Mac Address invalid. In which I can come to understand cause seeing a Mac Address starting like that is completely new to me. Every Mac Address I have, started with 00 except the netbook. So now, I spent days trying to find firmware updates, patches, anything! I even attempted to spoof the Mac Address on the netbook but Microsoft has a bug on Windows 7. (I have the Starter Edition that came with the netbook)
Windows 7 Mac Spoofing works with WIRED Connection. But it does not work with WIRELESS Connection. I used 3rd Party Tools: SMAC and etc... I attempted Registry Edits, I changed even the value key to the "Orginal Mac Address" and it just wont change [New Strings/Network Address Edits included]. I have been banging my head about this for a week now. The Internets has many answers but they did not work. So Spoofing the Mac Address is out of the question. Until Microsoft fixes this bug.
Anyway: Did D-Link release any sort of beta update/driver/firmware or anything to resolve this at all? Is there a modded firmware to force the Router to take this stupid paradox of a Mac Address?
Currently: I have the Router's WiFi Password-ed with Default Factory Settings
{Hardware Version: B1
Firmware Version: 2.02NA}.
View 15 Replies
View Related
May 3, 2012
I have a 5510 using AnyConnect VPN clients. I have a DNS name for my router to accept connections ie cisco.mydomain.com..I can ping the address by hostname from the clients machine ok but when the AnyConnect client opens it has my hostname ie (cisco.mydomain.com) but says "invalid host entry" I have to type in my IP address for it to connect.I have the hostname in my AnyConnectProfiles.xml.
View 1 Replies
View Related
May 2, 2011
I have made a test lab on packet tracer with three routers in triangle shape after each router i connected a switch with on each switch four end devices . now i want to make a routing table on each router, but the probleme is that each time i get an error "invalid next hop address ( its this router)". i am sure its the right gateway i type in .
View 3 Replies
View Related
Jul 31, 2012
My PC says "invalid IP address" when I try to connect. It says the IP address is 00:00:00:00. it only does this on the computer but works fine on all our laptops. I've been googleing solutions and i have tried the 'ipconfig/release' and 'ipconfig/renew' but this doesn't work. It just comes up with a error (I think its because the computer cant connect). We use a Belkin wireless connector. Its windows xp.
View 1 Replies
View Related
May 12, 2012
My laptop running Windows 7 has been fine until this holiday, connected to a hotel wifi that "trapped" the broswer and requested a login and password. That worked fine, but now I cannot access any other wifi networks.It sits for a while after entering the code and then has limited access, running the troubleshooter it says that I have no valid IP address?Tried IPCONFIG /RELEASE and it is saying "No operation can be performed on Local Connection 2 while it has its media disconnected"
View 8 Replies
View Related
Aug 11, 2011
i'm getting invalid ip address during connection to nearby wireless network
View 1 Replies
View Related
Jul 2, 2012
howdy,im having trouble with my LAC.it just keeps identifying.i have tried everything,uninstall/reinstall, netsh winsock reset,netsh int ip reset,disable/enable.windows diagnostics comes back with invalid ip address,and modem hardware failure.device manager lists the network adapter as working,yet it doesn't here's my ipconfig[CODE]
View 5 Replies
View Related
Dec 29, 2012
I have a 7" netbook but won't connect wirelessly it comes up invalid ip address
View 2 Replies
View Related
Dec 11, 2012
I have created a PPTP VPN on a cisco 3745 router, and a pool of addresses for the VPN clients. Now i want to find a way to reserve the addresses in the pool for specific machines, for example, if machine A connects to the VPN it should always be given the IP address a.a.a.a and that address should never be assigned to any other machine even if machine A is not connected to the VPN.
View 1 Replies
View Related
Apr 21, 2012
I am trying to add a new computer to my wireless statione access list but have not been successful. I got the ip address of the computer i was trying to add, my issue is how to add it to the list. i tried adding the details and filling in the device name and MAC address but kept getting the error message "invalid MAC address.please enter again.
View 1 Replies
View Related
Jan 27, 2012
im triyng to forward a port but when i click save settings it give me a message: "Entry 10: Invalid IP Address".
View 9 Replies
View Related
Oct 24, 2011
I'm tryng to configure a vpn with a cisco small business pro router, model srp527W-k9-g5 But when i try to set the “remote ip” in Remote traffic selection a I have to set (10.0.0.0) a message said:
“Invalid IP Address Format”
If i change the ip and i put 10.0.0.1 i have not error but I have to put 10.0.0.0 and if i configure it on a cisco WRV210 (por example) i have no error.
View 1 Replies
View Related
Feb 8, 2006
One of our Cat5513 has been displaying a lot of the error message below:
%SYS-4-P2_WARN: 8/Invalid traffic from multicast source address 01:00:5a:52:4c:4d on port 8/58
The frequency of this is quite disturbing. What this error is about? Module no.8 is our Gigabit Ethernet WS-X5410. Can that multicast address be mapped to an IP address or unicast mac-addresS? How can i go about resolving this?
View 5 Replies
View Related
Sep 3, 2012
Most of the 4500 Switches in our network are giving the similar error for so many ports
%C4K_L2MAN-6-INVALIDSOURCEADDRESSPACKET: (Suppressed 1 times)Packet received with invalid source MAC address (00:00:00:00:00:00) on p t Gi2/6 in vlan 100
Its impossible to do a wireshark packet tracing for all the ports.
View 2 Replies
View Related
Feb 14, 2012
Issue I am having with a Cisco 4507? Below is the error i am receiving.
Feb 14 10:06:09 EST: %C4K_L2MAN-6-INVALIDSOURCEADDRESSPACKET: (Suppressed 508 times)Packet received with invalid source MAC address (00:00:00:00:00:00) on port Po10 in vlan 112
Feb 14 18:44:06 EST: %C4K_L2MAN-6-INVALIDSOURCEADDRESSPACKET: (Suppressed 119 times)Packet received with invalid source MAC address (00:00:00:00:00:00) on port Po10 in vlan 112
Feb 15 00:51:06 EST: %C4K_L2MAN-6-INVALIDSOURCEADDRESSPACKET: (Suppressed 366 times)Packet received with invalid source MAC address (00:00:00:00:00:00) on port Po10 in vlan 112
[Code]...
View 9 Replies
View Related
Jan 16, 2012
I am trying to find a way to find the netid and hostid of any given ip address, given any ip address, I know the left side the IP address is the netid and the right side of the ip address is the host id but I am pretty sure there is more to it than that.
View 1 Replies
View Related
May 12, 2012
find host by MAC Address
View 1 Replies
View Related
Apr 18, 2011
I was trying to get into the router the other day and it gave me invalid password consistently. I have hardware version B1 and firmware version 2.00NA. This had been working fine but this along with remote desktop no longer work.
View 5 Replies
View Related
Nov 30, 2011
where the host names do not properly resolve with the right ip address.Example, I ping a host name, it gives me an IP, but when I VNC into the workstation, it is a totally different host.
View 2 Replies
View Related
Jul 12, 2011
Does 6rd working on the DIR-601?
For example if I enter the Comcast 6rd parameters:
6rd IPv6 prefix 2001:55c:: /32 6rd border relay IP address 69.252.80.66
I then click on "Save Settings". Now I get a pop up message that says "Invalid IP address" I'm running firmware 1.02NA
View 7 Replies
View Related
Sep 13, 2012
I have a problem with LMS 4.2 user tracking.When I generate a report on all my network all mac address are ok but there is no Hostname/Ip address in the result, except for 2 equipments.the only difference between these 2 equipements and the rest of the network is that they are connected on a not routed vlan. All the other phones, computers are connected on a routed vlan.I have a Nexus 5k as core and 2960 as access. Routing between vlans is done with the NexusMy DNS server is ok and reachable.
View 2 Replies
View Related
Jul 8, 2012
Instead of using a IP address I would like to use a host address that points to a NTP pool.An example would be:ntp server 0.north-america.pool.ntp.org Can this be done on the ASA series?
View 1 Replies
View Related
Jan 12, 2013
I have successfully installed a DCS-930L camera. However, when I add a second DCS-942L camera everything stops when I enter my existing account and password stating that they are incorrect (which they are not). The answer I get is: "Invalid e-mail and password combination".
View 2 Replies
View Related
Feb 27, 2013
We are running LMS Prime 4.2.3 on a Softappliance. We have a Cisco Switch behind a Non Cisco Layer-3 Device. In the end host tabe we see only the MAC-Addresses of the host connected to this switch. No IP-Address. The corresponding IP-Addresses are in the ARP-Table of this non Cisco Layer-3 Device. The arp table can also be read by snmp. Is it possible to get the ip address in the UT End Host Table in such an environment?
View 1 Replies
View Related
Mar 15, 2011
DIR-655 RevA4 - upgraded to 1.35NA, which is shown on http://192.168.0.1/
When I try to re-log in as Admin, I get a message of invalid password. I have unplugged to reset, but still cannot get back in.
View 3 Replies
View Related
Jun 23, 2011
I replaced my old wireless router with a Cisco Linksys E4200, running firmware version 1.0.02 build 13 May 24, 2011. About once a minute the router sends an unsolicited DNS message to the IPV4 multicast address 01:00:5e:00:00:fb with a destination IP address of 224.0.0.251. The unsolicited message is a DNS response with source port 32784, transaction ID 0, flags 0x8400 (standard query response, no error), questions 0, answer RRs 2, authority RRs 0 and additional RRs 1. The two answers both relate to the router itself: one has Name Cisco18738.local, type A (host address), class 1 (IN), cache flush true, time to live 1 minute, data length 4, and the address of the router. The other is the reverse of the same address. The additional record is for Cisco18738.local, type NSEC, class IN, cache flush true, time to live 1 minute, data length 5, next domain name Cisco18738.local, RR type A (host address).
When my desktop computer receives these messages it logs an error, for example: "Jun 23 07:39:22 sauterws02 avahi-daemon[1067]: Received response from host 10.146.9.1 with invalid source port 32784 on interface 'eth0.0'" The 10.146.9.1 is the router's IP address. I also see these messages on the wireless link from my laptop.I suppose the E4200 is generating these DNS messages in a misguided attempt to make sure there is no old information about its name. Is there a way to turn them off? If not, is there a way to report this to Cisco as a bug?
View 9 Replies
View Related
Jan 27, 2013
Region : Others
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 2.1
ISP : PTCL
trying to connect to router configuration (after several factory resets) at 192.168.0.1 but each time screen displays invalid username / password,doesnot even display username / password window,using admin as username and password,just cannot log on to configuration setup
View 3 Replies
View Related
Jan 12, 2011
"The license is invalid." (Error code:2268435460) it happens with all versions tested on several PCs (Win2003 Server, WinXP). Already tried to reboot, edit the registry, etc but no luck. Using 3 dcs 2121?
View 7 Replies
View Related
Aug 23, 2012
The old syntax that I am much more familiar with has been deprecated. On older IOS it would have been something like static (inside,outside) tcp 209.114.146.122 14033 192.168.30.69 1433 netmask 255.255.255.255 Plus an extended ACL to allow the traffic.I am trying to create a Static PAT to allow a host address to access our Network through an ASA. I have external address 209.114.146.122 that I want to hit the external interface on an obscure port (say 14033) and translate that traffic to an internal host address on port 1433.
View 11 Replies
View Related
May 31, 2013
Is there any way to Mirror a CISCO C3750 Switch Port Taffic to a remote Host IP Address?I know Port Mirror (SPAN/RSPAN) can copy one Interface Packet to another Interface. But I am looking for a way to miror Switch Port Packets to a remote Host (having Public IP Address and running Wirehark). Is it possible?
View 9 Replies
View Related
