I have a D-link Wireless router (DIR-628) that is connected directly to my cable modem.
From this router I have cables connecting to various rooms in my house. One of those rooms is my home office and in this room my home PC is connected.
I recently purchased a network enabled printer that I want to hook up to the network. As I only have 1 drop in my office I need a switch or related piece of hardware.
Before I go and buy a switch it was suggested that I use an old wireless router I had in storage. So I dug out my D-link (WBR-2310) router and simply plugged it in.
I now have the second router connected directly to my wall outlet which in turn is connected to the wireless router in my utility room which is connected to the cable modem. I am not using the WAN input on the second router but instead am using port 1. Port 2 goes to my PC and port 3 goes to my printer.
Everything seems to work fine...... Except, sometimes some of my wireless connections (laptop, iphone etc...) seem to have connection problems.
Is this because of the second wireless router on my system? If so, how can I disable the wireless function of this second router?
I purchased and set-up the EA4500 on Thursday. Friday my ISP (Charter) was out and worked on connection for over 2 hours due to slowness issues. Connected directly to modem I get normal ping times on whichever computer is connected. When I get the computer connected by the router (hard wired) I get very long ping responses up to 900ms. They are all over the place 30ms (I can live with that), up to the 900's. I contacted Linksys support last night, who had me update to the cloud firmware and change MT U to 1300, have not noticed a difference. I did end up doing a hard reset on the router last night after I lost tech support. We were disconnected with router rebooted, and I didn't have the patience to connect again last night.
It was so slow on my work computer, a pint to yahoo timed out. The computers connecting to router are
XP SP3 (mine) Win 7 Home (IPV6 turned off) Work laptop that uses VPN and VOIP
I have an e2000 wireless router and have several devices connected by ethernet cable including private data on an external hard drive. I am planning to allow a tenant in another building connect via an ethernet cable connected to my router. Can I limit that computer (tenant's computer) from accessing all other devices connected by ethernet cable to my router? I know can password protect wireless access and limit access to the internet that way -- but my question is specifically to connections by ethernet cable.
My E4200 router no longer accepts any WIRED connections. I can connect from the modem to the computer and everything works as expected. I can connect other computers wirelessly to the router. I cannot connect any laptops WIRED to the router. Nothing has changed on the systems to restrict internet access. There is something wrong with the router and the WIRED ports. I tried going through the troubleshooting on this site but it was of little to no assistance. The Cisco Connect utility doesn't appear to accomplish anything either. My guess is because I cannot connect to the WIRED ports on the router to connect to the internet to allow for whatever troubleshooting that needs to be done.
I have a home network with a wired BEFSR41 that, for a variety of reasons, MUST be manually IP configured (DHCP off). All computers and other devices connected to it are manually IP configured. I desire to add a device that cannot be manually configured, and needs DHCP. I therefore need to daisy-chain two routers with the second one DHCP on (and manual IP connection to the main network). The new device needs two-way internet access, but doesn't care if it sees any other current network devices. I've tried several configurations, none seem to work.
I have a WAP54G in my basement shop, wired to our main router upstairs, which is a Linksys BEFSR81. I'm not sure if this is an issue with the WAP or the router.
I only use the laptop computer in the shop every couple of days, but I leave the laptop plugged in and on most of the time. I used to have the power settings such that it didn't power down completely even after a long time. With that setup, if i didn't use the computer for several days, it would find that the connection to the router had died. The wireless link would report that it had a solid connection, but I couldn't connect to anything. Power cycling the WAP always fixed this.
Recently, I decided to save some wear & tear on the laptop drive, and adjusted the power settings to go to standby after a couple of hours. Now, it seems I can't even go one day without losing my connection.
I am running the latest frimware in the WAP, and the router is version 3.1. I can't check the firmware version on the router at the moment, because the web interface is giving me a blank screen. I know from past experience that I will have to power cycle it to get it to talk to me again.
In any event, it seems like the router connection to the WAP is timing out. I set the router "client lease time" up to 10000 a while back when I first had this problem, but that is clearly not doing the trick.
Have an Actiontec GT704 feeding DSL into a BEFSR41 which is connected to a WRT610N. Can access internet, modem and wired router from desktop. Can access wireless router from laptop. Cannot access internet from laptop or wireless router from desktop. Changed ip address for wireless router to 192.168.2.1 so no conflict with modem or wired router.
I just bought a new Linksys E4200, and connected it about an hour ago. I have a 30Mbps internet connection when connected direct to the modem, but when connected wired to the router, max speeds are 8Mbps.
Is it possible to run the EA4500 as a Wired only Gigabit router? To do this do I just go into the settings and disable both the 2.4 and 5 channels or do I have to do something else?
my work has a wired network. We currently have no wireless access. Some of us have could use a WiFi connection for our mobile phones, to receive emails etc. I have a spare wireless router at home and would like to know if I can connect it at work, to provide wireless access.
I have a router that was giver to me .I have a kinkle fire that I want to use from my home.I spent hours on the phone and someone @ ATT and some how the person gets lost when I ask them this questions.A total f 5 hours lost!
Is it straight forward to swap over from a wired router to a wireless one? The PC that is currently using the wired router will remain as a wired connection and some new items (laptop, PS3, Wii) will use the wireless connection. The wireless devices are already up and running in a different location and I was going to use the same router at the new location.
Can a wireless router be plugged into one of the ports on a wired router?I use a wired router and won't use wireless router because of security concerns. However, I am putting a PC in another part of my house. This PC will have limited types of usage - and security concerns will not be an issue for the type of use that machine will have.Running coax across the house will be difficult. My thought was to use a wireless setup for this one machine. But that would work only if I can plug a wireless Router it into a port on my wired router.
1) Can I plug a wireless router into a wired router?
2) If the answer is yes, will that compromise security on the wired ports because the wireless router is connected to it?
Router (wired) = Linksys BEFSR41; Router (wireless) would be "G"
A week ago, my desktop (with Windows 7) stopped connecting to the internet over it's wireless connection. It would connect to the router and obtain an IP address, but couldn't connect to the internet. All other devices in my home can connect just fine. Through the course of trouble shooting I found out that I can't connect to the internet with my desktop using a wired connection either. Also, I'm using ATT, so the modem and router are 1 unit.
Here's what I have tried:
Reinstalling the drivers.Resetting the wireless router to factory settings.Changing the security settings on the router.Running netsh int ipv6 reset reset.log ;netsh int ipv4 reset reset.log; netsh winsock reset catalog and restarting TCP/IP v4 and v6 are set to get automatically Made sure MAC address wasn't being blocked on router. I tried disabling ipv6 I can ping myself (@ 127.0.0.1) and no packets are lost. I tried pinging my ip address from the router, and nothing got through. This was true using wired or wireless. I tried connecting to the routers configuration page (using its IP address) and I couldn't. Did a virus scan and nothing turned up.
I have been having a heck of a time getting my gigabit network working off of either my new router, or 2 older ones. Since my house is wired with cat5 cables, I was thinking about putting an 8port router in my networking box that is tucked away in the corner of the house, and then using my new Dlink 857 router as just an access point in a more optimal location in the house.
My questions are as follows:
Would be slower for either the wireless internet speed or the speed of file transfers between the wired computers?
Would I be able to transfer files both ways from the NAS that would be hard wired to the 8-port router? Is there any benefit/disadvantage to my idea that I have not thought of? I know it is possible, but do I want to do it?
Internet----->Cable Modem --------->Wired Router --------> Xbox/NAS/PS3/Smart Player/Dlink Router set as Access Point
My wife has a home office with her office computer connected to our modem via a cisco router. Our home computer is connected via this router as well. I want to add a wireless router (netgear) so I can use my laptop anywhere in the house.
Intalled a new router (Linksys Cloud 1200) yesterday. Immediately after that the 2 computers that were connected to the network could no longer access the internet. My laptop and my ipad can access the internet wirelessly. The laptop which was not connected to the network when I connected the router can access the network both wirelessly and wired. Printers attached to the network will print without a problem.Finally I took an old computer out of storage (running WinXP) and hooked it up to the wired network. It too has no problems accessing the network. So have to assume the issue is a software issue with the two computers that were hooked up to the network when I changed the router.I have read the posts here - I did a stack reset on one of the computers but no luck. I removed Norton 360 and Team Viewer which in other posts people said they had issues with...to no avail.
Since I dont have a wireless connection to the 2 computers that cannot access the internet - I cannot download TSG SysInfo. However here I did copy the ipconfig lines below from the desktop thats not responding. [code] Was working fine until I replaced the router. I tried going back to the oldrouter (Netgear) same issue - no wired internet connectivity.
Upstairs I have my internet coming in with a Comcast modem/ router ( I will be bridging this b'cuz it sucks as a router). Also, I have my Dir 655 upstairs that I will use for wireless. and I have my dir615 downstairs and I want to use it as a basic switch/wired router. How do I set up my dir615 as a switch/wired router?
I just connected a WRT190N v2 Wireless Router to my XPS 400. When my wife tried to connect our other desktop to the wireless network, everything seemed fine. I noticed that, when she wasn't actively browsing or using the network, her computer would lose connectivity, but regain it when a browser was opened. When I tried to use the XPS, I found that it had no connection. I regained connectivity after using the Windows Network Diagnostic tool, but neither computer seems to keep connectivity when left alone, at least for very long.
Why my E3200 is (for lack of a better word) "throttling" my internet speeds.I'm signed up for my ISP's 50Mbps data plan. When I hook up my laptop directly to the cable modem (via LAN cable), I see close to 50Mbps as the internet speed (measure via speedtest.net). When I hook up my router to the cable modem, and connect via LAN cable to the router, the internet speed comes down to around a maximum of 26Mbps. NOTE, that I am still talking about a wired connection and not a wireless access. Speed tests with the wireless access do yield the same results as well. To rule out the obvious, I've confirmed that there aren't any other devices on the network and no other bandwidth hogging applications running while I performed these tests.
I finally decided to go with a e3200 yesterday and picked up one at Walmart. Last night I went to hook it up and had no luck setting it up. Now I have able Internet with a phone VoIP service. After trying to connect several ways, all the router wants to do is sit with a flashing power light. I cannot access the setup page wireless or wired and have tried several methods I found last night.
I have a wired network at work and would like to add wireless capability so the owners here can connect with their mobile devices. The ultimate goal is to have WiFi for company only and not for customers (invisible network). I read about making my wireless router into an access point, which involves disabling the DHCP server on the wireless router and letting your wired router deal with it. The issue is that my wired router is preconfigured for my POS system at work and it has it's DHCP server disabled. So, this configuration isn't an option. Is there any way that I can use my wireless router BEFORE my wired? My DSL modem is in Bridge mode and my wired router deals with the login. I hope this isn't an issue. I'm unsure of which router would deal with the DSL login
I own a E4200 v1 router and recently discovered that wired and wireless devices cannot talk to each other.Their IP address are acquired through DHCP and inside the same network, but cannot talk to each other by any means, such as ping or http connection.I tried switching wired device to wireless and this actually solve the problem. I've searched and seen thread talking about "AP isolation" settings in advanced wireless setting, but there's no such setting page in my router (running on v1.0.5 firmware). I've already disabled any filtering and firewall function on the router, but still no good.
Can I have a wireless access point connected, by wire, to say 2 PCs and a wireless router connected to the internet (+ other PCs) and the link between the access point and router is wireless (i.e. not wired)
I have 3 computers running Windows-7. One computer is directly attached with wired connection to broadband internet modem and other 2 computers are attached through a Wireless router attached to modem. The problem is this that both wireless computers are running internet well while the directly connected computer shows internet connection but no data flow happens. When the Wireless router is turned off the directly connected computer starts working internet.
