DIR-815 D-link Router / Limiting Traffic Through Router?
Jan 15, 2013
I am wondering if there is a way to limit traffic through the router. The problem is that one person downloads something, they hog up all the bandwidth, and end up creating lag on other people that may be gaming. So I am wondering if there is a way to limit traffic to 500kb/s per connection..(wired or wireless).. I have a DIR-815 D-link router, and have looked through the settings but I don't see anything off hand that might be related but I could have missed something.
View 15 Replies
ADVERTISEMENT
Jul 18, 2011
i have to restrict that router and switches shall join only given multicasts. Means if i change multicast in TVG430 from 239.0.96.1 to 233.0.96.1 than it shall be blocked.My TX rate i set to 20 Mbits on TVG430, i want to rate-limit it to 15 Mbits on switch on Ingress int gi 0/23 or egress gi 0/24 included are three show runs output.ip multicast rate-limit out group-list GROUP source-list SOURCE.
View 2 Replies
View Related
Jul 19, 2012
I have a 3560 switch where I have 4 ports connected, one is to our WAN provider - 10Mbps and the other three are connected to different customers who I want to get an equal share of the 10Mbps bandwidth.I'm fairly clued up about configuring modular QoS but I'm being thrown by the fact that you can't apply a service-policy outbound on the ethernet ports.
View 3 Replies
View Related
Aug 4, 2012
I am trying to limit the incoming and outgoing traffic on a l2 port to 8mbps for a ip subnet within the nexus 7000. The port is connected to my ISP router which has a bandwidth of 20mbps.Policing won't work on a l2 Port and shaping cannot be applied on a port level. url...I have been reading thru the qos guide for nexus release v6 and have problems understanding the different queues.
View 3 Replies
View Related
Apr 7, 2011
I live in rural Alaska and use satellite internet with 1.5mbps rate and 4gb rolling weekly download limit. I was wondering if there are any wireless routers I can buy that I can set a bandwidth limit for the specific router. Due to teenage girls in the house we hit the weekly limit in a day or two because of all the music videos and such that they watch on you tube, it is annoying getting limited to the 256kbps download rate so often.
View 5 Replies
View Related
Nov 2, 2011
I have a DIR-600 (firmware 2.05) connected to internet and my computer. For a week or so, for some reason, there is a high number of SSDP messages on my internet cable (about 100/second). Probably a faulty equipment from the internet provider.
The problem is that this high traffic of SSDP messages cause the router to freeze, the instant I plug in the internet cable.
I have tried to block in the router firewall the address 239.255.255.250 on port 1900, but it get the error "invalid address". I have also disabled the Upnp function on the router, but without result.
How can I block these messages, so I can use my router again.
View 5 Replies
View Related
Feb 21, 2012
I've had a DIR-600 for years, and this past month it has been really bad. I have a 3mbps Cable connection, always worked fine and fast, but since the start of the month I've been getting, at most, 60kb/s of download speed (I have a wired connection to the router). Speed tests register everything as fine, except for the download speed, which is really unstable and shoots all over the place, going from 1MB/s to 0 in some instances. I thought it was the ISP being bad since we're having a lot of problems with this provider where I work, but got tired of it and decided to do some troubleshooting myself. When I connect directly to the modem, without the router, I get the same fast speeds I used to. I tried rebooting everything, I tried resetting the router to factory defaults, but nothing seemed to change that. DL speed is always below 60KB/s and if something is downloading at that speed, a single page takes a minute to load.
View 3 Replies
View Related
Jan 7, 2013
So my ISP (Telus) recently replaced our old router with a ZyXEL VSG1432. I'm currently having a huge lag issue when my roommates laptop is connected to our network. He is connected via wireless, I'm wired. So I did some searching around and I think i can solve this by limiting his bandwidth with QoS settings. I'm getting conflicting information here though. After logging into the router there are no QoS options yet according to ZyXEL's website url...This router should have the settings available. Is it possible that Telus does something to remove this feature? Is there some not so obvious way to enable QoS? Is there some other way to limit the bandwidth?
View 1 Replies
View Related
May 15, 2011
I currently use Verizon FiOS 20/5. The speed has been great until the day my cousin and his parents moved in. They also use our FiOS connection and I have came to the conclusion that my cousin's laptop is eating away all of the bandwidth which makes all devices using FiOS have extremely slow internet speeds. I know it is his computer because I logged in as admin to the Verizon FiOS page (192.168.1.1) and I saw that he is using several P2P applications and downloading torrents as well. Is there a way I can limit the bandwidth he is using so that the internet speed can improve? I looked at the QoS tab and tried to play around with the settings, but I don't want to mess it up. The router I have is Actiontec M1424-WR (Verizon FiOS 20 Down/5 Up). A lot of sources I am reading says that I have to use the QoS, but I don't know how to use it on the site.
View 3 Replies
View Related
Feb 8, 2012
I have one P-660HN-T1A ZyXEL wireless router at my home with 2mbps connection. ZyNOS Firmware Version: 3.40(UTU.0) my brother always keeps on downloading stuffs from bitTorrent and eats up all the bandwidth.
1. is there any way to put speed limit on each user of my wireless router??
2. or is there any way to just block torrent download on my router???
3. QOS [quality of service] setting on Zyxel router so that I make my priority higher than my brother?
View 4 Replies
View Related
Jul 29, 2010
I will have this one router. Its f0/0 will be for the Internet connection with bandwidth of 30Mbps. Its f0/1 will be connected to a switch for internal networks. This link will be separated to 3 VLANs for 3 internal networks. I'm wondering if there is a way to gurantee 10Mbps for each VLAN but allow use up to 30Mbps when another two VLANs are not using any Internet bandwidth? I only worry about download bandwidth from internet.The 3 internal networks will all have public IPs and they belong to their own subnets. There won't be NAT/PAT.
View 18 Replies
View Related
Apr 13, 2011
Is it possable to limit the download/upload speeds of a wireless computer on this router, the reason is i am at home working on files from my office computer and my son gets home, and starts downloading massive amounts of music an other ****, and i get disconnected to the office computer, and have to start from scratch again. I just want to limit his speed to maybe 25% of the max internet connection.
View 5 Replies
View Related
Mar 29, 2013
Every so ofter, the switch of the router just stops moving traffic between the LAN and to/from internet, though the WiFi keeps working and can still use internet.
I can still use the router's switch, and ping other computers on the local LAN, what happens is that the router stop routing wired traffic from/to internet, the rest of the issue is still the same, I opened reddit on my smartphone and there it was working via WiFi, but the would have none of it for the computers on wired LAN, not even accessing the router's page or telnet.
It is like some service or bridge between the switch LAN and the router itself dies... I'm still clueless.
The only "pattern" that I see is that my desktop is on line, because I can be not at home for 12+ HS and I can connect remotely to the server (rd p and trans droid) so I know it has internet access, but sometimes I think this happens when I turn on my desktop, like just now, this morning, but again, I feel is not every morning, trying to be more scientific about it I come here after every time it happens to record it, and also set the record straight about the issue description.
So, assuming it is not a hardware issue, because I did not had this problem in all 2011 and 2012, I do not overclock the router neither use other than default TX power level.
- How do I begin diagnosing this issue?
- If it is a known issue with this builds? I could no find it.
My goal is to be able to provide info for debugging the problem and possible finding a fix/workaround it. If it is indeed hardware failing, how do I even begin to diagnose it from that POV? The message is empty...
Even with the new build r21061 still happened two more times. Now the real problem to me, is that I cant even revert it to stock firmware, I tried even with:
- unplug router
- press and hold reset
- plug router
- keep pressing until power led blinks orange
- enter 192.168.0.1 (PC must have static IPA, i use 192.168.0.200)
Can't open 192.168.0.1 in FF nor chrome and does not even ping. [URL]. I just want to get it back to stock or do not hang up the switch-to-router(ing).
View 1 Replies
View Related
Dec 13, 2012
I own a wireless router (ZTE W300) and due to the large number of devices in my house, and limited broadband usage, can I limit downloads/uploads (in other words, limit data usage) to a particular device over the network?I think the stock firmware on my router doesnt allow that (and its pretty base level too). If so, do you recommend any other firmware that can do the task, and is compatible with my router?
View 1 Replies
View Related
Feb 11, 2012
I have problems with my wifi router linksys wag200g.we have 2 pc in my home, and every time the other one connects to internet i lose almost 80-90% of speed connection.can i do something to limiting the speed of the other computer?
View 1 Replies
View Related
Aug 28, 2011
I am sharign my bandwidth with my neighbour and would like to keep a tab on what he is downloading, and then limit the speeds he gets while using my 4Mbps line. He's accessign using a WIFI L:AN card.Can I do this usign WRT160Nv2? Maybe any third-party.
View 2 Replies
View Related
Apr 10, 2013
Any idea for limiting bandwidth on cisco 892F router? We have 2 VLANs through our LAN and one must be limited upto 1Mbps or 512Kbps.
View 2 Replies
View Related
Feb 15, 2013
Region : United Kingdom
Model : TL-WR940N
Hardware Version : Not Clear
Firmware Version :
ISP : BT
I've been having some issues with my BT Broadband for a while, so decided to switch to a new router, a TP TD-W8960N, however setting up QOS isn't as easy as I had anticipated (I'm fairly new to this!).
My main issue is that we have a fairly limited broadband connection, but I need to backup work using backblaze. This is a pain because as soon as it starts to backup it eats what bandwidth we have. What I want to know is can I just limit the range of ip-addresses which they use for their backup?Is there a simpler auto-QOS approach I could use? The router is currently running the latest firmware that isn't in beta. Also - do these routers auto-update firmware?
View 2 Replies
View Related
Dec 27, 2012
We have a customer who has a network consisting of two ISPs, one as a primary and the other as a backup. We are trying to create a configuration that would allow the primary link to fail and the secondary link to automatically pick up traffic and begin routing .how to set something like this up. Both routers are non Cisco routers and there for HSRP is out.
View 14 Replies
View Related
Jan 17, 2012
We've had problems with our internet router losing connection to the internet. All traffic stops, a reboot resolves the problem. The router only has a public IP and it's connect through a dummy switch to the ASA as shown. I want to be able to monitor netflow or something and wondered if I could add a static route to the 10.x.x.x network and then add the netflow commands. Here is kind of how it looks, I simplified it some by removing unnecessary devices
View 2 Replies
View Related
May 6, 2012
How to view all network traffic on your router not just your computer? Using wireshark. Window 7 and Ubuntu.Without using any enhancements like airPcap or Turbo cap.
View 4 Replies
View Related
Mar 11, 2013
I'm looking for a tool that will let me log traffic from my Linksys router. I'm interested in seeing which devices are access thing internet from my home and to see what kind of bandwidth they are pulling down.
View 3 Replies
View Related
Oct 7, 2012
how do I monitor a computer through the wireless router
View 1 Replies
View Related
Feb 23, 2011
I'm attempting to set up a Cisco 1921 router running IOS15, and am having trouble with the NAT - it might be that what I am attempting is not possible. The only traffic going across the router is UDP, and the outside of the network canot be changed.
View 1 Replies
View Related
Jun 19, 2012
PPPoE is established and I can access router from outside. But router can't ping itself and ouside and NAT isn't working as well. Main goal is to make Internet work from router.
Cisco IOS Software, C890 Software (C890-UNIVERSALK9-M), Version 15.0(1)M7, RELEASE SOFTWARE (fc2)
version 15.0
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
[Code].....
View 2 Replies
View Related
May 12, 2011
So a BT home hub is a very cheap router, so it seems. And - if you connect a quite a lot of eq to this router, it starts crashing. "It can't handle the traffic.". But what does that mean? Why can it handle the traffic for a while and after a few days it can't anymore. And lets say - some of the eq doesn't really work on the external network, it works on the internal network, and it doesn't need the internet to work for proper functionality. So - what is important then? Which specifications are the important ones?
View 2 Replies
View Related
Jan 7, 2011
A PC connected to a Cisco 877 router and 877 router is connected to another router (7301) via GRE tunnel,Cisco 7301 router is a NAS server and is being used as a PPPOE server.If user create a PPPOE connection on his computer and dial with a username/pass we want to send the PPPOE traffic to 7301 router, so 877 router should pass the PPPOE traffic to 7301 and user will be able to connect,User -> 877 -> 7301(PPPOE server).
View 4 Replies
View Related
Feb 18, 2012
The router passes the Interface test for the WAN port in CCP but it still we cannot access the internet. Here is my configuration:
Building configuration...
Current configuration : 3663 bytes
!
! Last configuration change at 09:29:52 Chicago Mon Feb 20 2012 by fbcpekin
version 15.1
[Code].......
View 5 Replies
View Related
Feb 12, 2013
I have reconfigured the router from scratch using all sorts of methods and can not work out whats wrong, basically when the client is going to their bank the login screen takes upto a minute to load, and the same with hotmail. However using a cheap billion router these login screens are instant
Checking the CPU usage shows the CPU is hovering around 5-20% at the worst of timesThere is about 10 machines behind this router and they do not do that much intensive work over the link besides Outlook Anywhere (HTTPS)I have put a ACL on the LAN connection to only allow 1 machine in and still no luckI have also updated the IOS to c870-advipservicesk9-mz.124-24.T4.binAll other traffic runs fine over the link and there are no complaints on standard HTTP traffic
View 3 Replies
View Related
Jan 26, 2011
Traffic Generator TG connected to R1 via switch SW . One end of the R1 is LAN1 interface and other end is WAN1. LAN1 is connected to switch SW. WAN1 is connected to R2 WAN0 interface..
TG ------------- SW ------------------------------(LAN1) Router R1 (WAN1)------------------------------(WAN0)Router R2
I have to pass traffic to R2 WAN0 interface.
Wen I pass traffic say 5000 from TG, I'm to recieve 5000 at R1 lan1 interface but I'm not to recieve at R2 WAN1 interface and hence not to R2 WAN0 interface.
Config at TG:'
-----------------
Destination IP : R2 WAN interfavce IP
Destination MAC : R1 LAN mac
View 1 Replies
View Related
May 10, 2012
I have an E2500 configured inside my network. It is configured to give wireless PCs (This subnet is connected to a Lan port with 10.30.0.0 address) another subnet than wired PCs (this subnet is connected to Wan port 192.168.0.0). Since i configured i can access from wireless PCs to servers and PCs in the wired subnet but cannot access from wired computers from to wireless PCs. I suppouse it is because traffic is restricted from Wan to Lan.
View 5 Replies
View Related
Oct 18, 2011
I'm troubleshooting an issue with a new site-to-site vpn setup between 1800 series routers. The tunnel is up but not encrypting traffic on one router, when IP CEF is disabled traffic is encrypted and decrypted!
View 1 Replies
View Related
Jun 7, 2011
I have 7200 Router some flows are not forwarded and when i check ""show ip cache flow"" output i found the destination interface is going to Null i checked the access-list it permits these flows.
View 3 Replies
View Related
