After clean reinstall of windows XP Pro on Dell dimension 4600, computer not connecting to internet. I have it plug into port on my wireless router, I am posting this from different PC pluged into a port on the same router, so I do have internet to the PC.
View 13 RepliesMy ethernet was working fine when I shut down my computer then all of a sudden it rebooted and gave me a blue screen. I rebooted it and it started but then it was not able to connect to the internet. The pci adapter driver was not there. I reinstalled it and it still would not connect. I uninstalled it and reinstalled it, changed the ethernet cord for a new one and tested the new cord on a different device with no problem but stil cannot connect. It says network cable is unplugged. This happened before and the dsl technician was able to get it to work again unfortunately I have no idea how but it had something to do with the configuration.
View 1 Replies View RelatedI have a Dimension 4600i that doesn't want to Wake on LAN. I am running the latest BIOS (A10), Intel Chipset Drivers, and latest Intel Pro/100 VE Drivers. I set the Network Settings to Network w. PXE and the startup sequence is CD-ROM, PXE, Hard disk. I am actually using the PXE, that is exactly what I want. My only problem is I need to do Wake on Lan for the system to wake up and PXE against my backup server. So far, no luck. I have tried numerous utilities and when I send magic packet the thing just sits there, everything else works great, the darn thing just won't come alive unless I hit the power button.
View 2 Replies View RelatedI reinstalled windows xp (reformatted c). Installed the drivers in this order: Controller, Video, Audio, Network, modem. I selected the drivers that had the check beside them on the driver disk. Now, in the device manager, there is a yellow question mark beside the ethernet card and I can't connect to my broadband connection. Wire is attached... checked that twice. I have connectivity through other computers, so internet is working in the house.
View 3 Replies View RelatedMy hard drive crashed. I have finished installing everything on a new drive that I have from my Dell installation CDs. However, in the Device manager, the Ethernet Contoller shows the the drivers are not installed. I can't seem to find them anywhere on the Dell web site.
when I pull the cover off of the computer - the outside of the Ethernet connection says "418D-J51 10/100 BT"
I'm trying to fix my brother's computer (an old Dimension 4600). At first ISP modem wouldn't even detect his computer on the network. I downloaded the Ethernet drivers and installed them and now it detects his computer, but it still won't connect to the internet
View 4 Replies View RelatedI cant find a network driver that will work. I have a dell dimension 4600 that i am trying to run windows server 2008 on. its original opersting system was xp/sp3 . i simply want to know if there is any working Ethernet driver for windows server.
View 1 Replies View RelatedI have dell dimension 3000 computer running windows 7 ultimate,behind dir 855 dlink router.I am thinking of upgrading my machine to wireless n but my system only supports pci only cards.Is there anywhere i can collection of pci cards.I googled but it seems pci only are in scarce supply.
View 5 Replies View RelatedI have an elderly Dell Dimension 5150 desktop computer. It should have wireless capability. I purchased a wifi usb 2.0 adapter, but have been unable to set it up following on-screen instructions.Running Win XP Home edition.I have reason to believe that OS may have been comprimised by a virus previously; that is why I set it aside. Now I am attempting to reactivate it.The OS seems to work normally, but I need internet access to confirm this.
I have a functioning wifi router in my house; it works normally with two other computers.I am attempting to confirm if the Win XP OS needs to be replaced before purchase.How can I confirm the OS is shot and I must purchase a new one?
I am not very computer literate, so this will seem like a stupid question. How do I determine whether a computer has wireless connectivity?
I have a Dell Dimension 9200 running Windows Vista that I bought in 2007. Previously, I have connected it to the internet using an ethernet cable to my router, but this is no longer possible now that my new computer is using the ethernet connection. I want to establish a wireless connection between my older Dell Dimension 9200 and my router, but I don't know how to find out whether the computer is capable of wireless connectivity.
I am trying to get an old computer in my church's computer lab connected to the internet. We have an ethernet cable that works (other computers can connect using it), but I cannot get the Dimension connected. It says that the Local Area Connection is enabled, but I cannot connect to the internet. I tried installing all of the ethernet drivers on the DELL website, but nothing has fixed the problem
View 10 Replies View RelatedMy (home desktop Dell Dimension E310) other computer had a virus that flatlined the machine. I reinstalled the operating system from the discs provided by DELL. Now, I can't connect to my DSL. The browser wont see the http:/192.168.0.1 ActionTec router. It's plugged directly into the computer via ethernet cable. this laptop is receiving signal from the wireless portion of that router, so there has to be a signal to the computer (it was working earlier this morning prior to DELL disc reinstall).
View 10 Replies View RelatedI use a Dimension 3000 desktop. I cannot dial in to my ISP (Juno). Each time I try, it responds "can't dial in". I checked the connection, that's ok. I checked the phone line and that's ok. A box pops up that says "system service not working go to Help & Support" When I try to go to Help & Support, a box pops up "system service not working".
This all began after I used an AVG PC Tuneup. Since then the bottom line colors changed. For example, where START was green with white letters and the windows colors symbol; it is now WHITE with Black letters only. Where bottom line across was blue, now it too is WHITE.
I can pull up WORD, Games,etc. but am unable to dial in to get to internet.
Around 2 weeks ago, there was a storm in my city that completely shut down all the power for around 5 minutes. After we got the power back, I connected all the wires in the router again and tested the connection on my desktop. The internet was not connecting at all. Every few seconds a message that says "A network cable is unplugged" pops up and then it goes to Acquiring network address.I thought maybe the storm damaged the card. My father called IT Support from his office and told me to check for a light blinking next to the ethernet port at the back of the PC. IT said that if the light was flashing, then it wasn't a problem with the network card.I changed the Link Speed to every different option. No luck. I tried the Repair command. It shows up with a message saying that the IP address couldn't be renewed. I even updated all the drivers.I'm at a loss here.It's a Dell Dimension 9100 with Windows XP SP3.
Windows IP Configuration
Host Name . . . . . . . . . . . . : alifamily
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
[code]....
just to mess around i reinstalled xp/formatted drive on dimension 4550. plugged ethernet cord from computer to router but can't get any connection to internet. going through the network wizard makes me set up local networks. tried to install new drivers from download page nothing is working.when i open the network connections page under control panel no LAN shows up or anything.
View 3 Replies View RelatedI have inherited a Dell dimension 2350 and connecting it (preferably wifi) via my Sky broadband router so that my daughter can use it in herr bedroom.
The 2350 has come with a netgear GG834G v4 modem/router and relevant ethernet/phone cables and all cds etc. and runs xp. Is the netgear now redundant?
At present, I use an old inspiron 6000 laptop with a wifi connection to Sky.
She has a Dell Dimension 2400, Service Tag 2VG3341 running Win XP Home with Service Pack 2.
At startup we get a message from Norton A/Virus 2003 - Symantec cannot scan your email address, because your network is not properly configured.
Canceling this message and trying to connect to the internet using the Dial –up connection gives this message:
Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this connection.
I have checked the Network Properties as per Windows Troubleshooter, but cannot find anything unusual.
I have also ran the Dell Diagnostic CD, but these tests have are all clear.
The Windows firewall is also disabled
When I try to enable it I get the error message –
Windows Firewall settings cannot be displayed because the associated service is not running. Do you want to start the Windows Firewall Internet Connection Sharing (ICS) service?
After clicking on “Yes” A dialog box shows “Starting the Windows ICS” Then comes the message “Windows cannot start the Windows Firewall /ICS Services”
Cable modem connected directly to a Dell Vostro laptop works fine. Same cable reconnected to Dell Dimension 4700 is not working. This has all been working fine for years - usually I have a wireless network with the 4700 connected to the router by Ethernet cable, and the Vostro connected by wireless, but I have removed the router to close in on the problem.First, I am not sure if my ip settings are correct. This is the output from 'ipconfig /all' [CODE].
View 5 Replies View RelatedRecently, I re-installed windows XP on a newly formatted hard drive. I tried to use the network setup wizard to create an internet connection via a cable plugged into back of pc but the wizard says that it can not detect network hardware. I believe the network card is built into the Motherboard. I tried to isntall drivers from the Dell Cd that came with the system but it fails to detect a modem. My system is a Dell dimension 5150?
View 3 Replies View RelatedI just got my dell dimension 2400 up n running again.
1) I need a new operating system . i know how to do that what with windows being designed to make computers work properly or what is the latest thats not vista or could i just get a copy from a friend? <--- that may not be particularly legal but idc i just want to know if it would work if a new disk is too expensive
2) I need internet connectability i have a working att wireless router brand new just got delivered today and i have a d link wireless reciever thing i just got from my buddy but how to get the internet up n running without boring holes in the floor / wall or dragging a cable 18 miles from the router to the computer so i need it to be wireless
3) I am not sure what to do with it do i just need soft ware updates or do i need hardware updates to get it up to speed with the so called "big boys even though its far larger than any laptop my goal is to have a fast running internet capable game capable and multitasking computer with which i can do.
I am about to re-install Windows ME on an old Dell Dimension 4300. The computer is connected to the internet via a 2Wire 3600HGV DSL modem/router.
Do I need a software firewall? Or is the router sufficient? Is antivirus software necessary if I don't download anything? It will be part of a local LAN, so I don't want to jeopardize any of the other PCs on the home network.
NOTE: I'm looking to run some older (non-DOS) computer games that don't run well (or at all) on XP and newer systems.
NOTE 2: When I say 'secure', I'm not looking to actively browse the web on the machine. I was curious as to what risks I be facing if I simply had this PC connected to my local network (and thus the internet).
I want to switch back to my dell desktop 4600, it is not reading the network or ethernet there is a steady amber light. I clean inside and pulled network card out and put back in and still have steady amber light. I have dsl with att and it works on my laptop.
View 5 Replies View RelatedI installed a new Media link MWN-WAPR150N router and I can connect two laptops and an i Pad wireless but when I try to access the Internet through a Dell Dimension 4550 desktop which is directly connected to the router, I get the message "Internet Explorer cannot display the webpage." I have tried unplugging the cable modem and router, downloading network drivers, repairing the connection, ip config /release and /renew, etc. and nothing has worked. The connection status shows as connected. I can ping the router successfully, but I can't ping a web site.
View 1 Replies View RelatedI tried to connect inet with a DSL "Speed Modem 200" (no WLAN!, no router), RAS failure 651.
OS WIN7 Enterprise, SP 1, 64-Bit
It seems to be a driver problem of the LAN adapter, because under XP SP3 on the old PC ervery thing is fine.The driver test told me "newest version" what's to do?
I have an old laptop with an old wireless adapter that doesn't support WPA2. I have another laptop that does and is connect to a router. Can I hook up the old one directly to the new one to get on the internet (I want to use both computers at the same time) without connecting the old one directly to the router (because it is in another room)?
View 3 Replies View RelatedHow, if possible, do i connect one pc( running on xp) via lan to another pc' internet.(on win7)I can't take off the IP cause my accounting program needs it.
View 7 Replies View RelatedI want to know if I can get wi-fi connectivity on my Dell Dimension 3000. I bought it in 2005, and I don't think wi-fi capability was built in.
View 1 Replies View RelatedI've got a Dimension C521 used as an HTPC with XBMC (Unix Version).The Remote Software of XBMC supports Wake on LAN.Is there a Way to enable WOL in the C521? Perhaps with a BIOS update ?
By the Way is there a way to update the BIOS in Unix because I don't have a Windows Version on this HTPC?
where (in germany) can I buy a CMOS Battery because the alert that the Battery is on low Voltage annoys me
Just recently I have one of my computers connected to my router not able to access internet, while all the other ones can. I have a wireless and 2 LAN connection to my router 1 computer from the LAN connection works but I'm having trouble with the other one.When I connect my cable from the modem directly to the my computer internet works fine.I tried resetting Winsock didn't work. Tried changing my cable didn't work. Scanned for any viruses or malware none detected. Also I can ping my router with no problem, but when it comes to pinging google.com or any other website I get the message timed out and get 100% loss. [code]
View 19 Replies View RelatedHaving just solved the missing network controller on my Dell Inspiron laptop I thought I would try the old Dell dimension 455-0 desktop I have. It too is missing the network controller, I can access web through wireless usb but not though cable or wireless. I have the disc but I can't install from it as I get message saying it is outdated. Tried Intel but the download ends prematurely and so doesnt work.
View 1 Replies View Relatedcab u put a wireless card in a dell dimension 9150 desktop computer
View 1 Replies View RelatedI have a Dell Desktop Dimension E520 with a Windows 7 operating system. Up until a couple of days ago I was able to connect to the internet. I have the router connected to the computer via an ethernet cable. Now if does not detect any wireless routers in my vicinity and there were 7 others. I have a belkin G router.
View 1 Replies View RelatedMy network contains:
-Netgear router 1
-Dell Dimension 9150 - Windows XP pro SP3 (this machine, connected to router 1 using a pair of netgear powerline adapters
-2 x Dell Inspiron laptops - Windows 7 Home 64bit (wireless)
-iMac - OSX Snow Leopard (wireless)
-Apple Time Capsule (network drive)
-Several misc items (phones, iPod/iPad, Vodaphone sure signal, PS3)
-Network printer
-Netgear router 2 (used as wireless access point the otherside of the house, connected using a pair of netgear powerline adapters) CURRENTLY DISABLED
None of the 4 computers can see each other, but they can all print and access the Time Capsule. Now I've made sure they're all on the same workgroup and that relevant services for sharing files are running. When I try to "View workgroup computers" on the XP machine I get the error attached.