I have accidentally uninstalled the WLAN utility card. I tried reinstalling it via dell downloads but windows says that it is not compatible. I have lost my wireless connectivity to the internet on my inspiron 5520 laptop and need it back as soon as possible. Do you have this driver which is compatible with win 8?
My wireless card is Dell Wireless 1704 card (802.11n + BT 4.0)
I have a Inspiron 9400/E1705 laptop with the Dell Wireless 1500 802.11n WLan card when I try to use the utility I get an error message that the internal settings are bad and to restart the computer to fix. It does not fix this. I am currently using the windows wireless to control the card. Is there a way to fix this, It used to work fine just when I downloaded the R151519 update now even when I use a previous update I still get this error. The driver is Broadcom dated 10/12/2006 version 4.100.15.5
View 3 Replies View RelatedI have a DELL Studio 17, with a DW1520 Wireless N WLAN half mini card. Whenever I go to the control panel utility, it tells me there are no wireless adapters, yet, the very fact I have this post up shows I am connected to the Internet. I have wanted to specify a specify local lan IP address but I cannot access the utility... yet the device manager tells me its running ok. However, downloading the utility from DELL, it tells me that there are no compatible devices.
View 12 Replies View RelatedSo I just got this Linksys E1500 wireless N router in hopes that I would get a better signal within my room as opposed to my older router. Unfortunately, nothing has changed, in fact I think I'm getting weaker signals. My previous router was a D-Link WBR-2310. I went to speed test.net and tested 3 variables. My wifi on my desktop in my room, my wifi when right next to a router on my laptop, and my wifi using my neighbors wifi in my room.
What is the point of this new wireless N router, when it can't beat a G router older model in reach? And why does is have a 0.50 mb d/l speed but a 3.6 upload speed?
I have an Inspiron 8600 with a Dell wireless 1350 WLAN mini card. It operated perfectly with a Belkin 54G router but when we changed to a Plusnet Thomson Gateway router I started to lose the signal for about 20 seconds every few minutes. I complained to Plusnet who replaced the router. I have never been able to connect wirelessly since installing this piece of junk. After trying for three solid days I contacted a technician at Plusnet who tried all the usual tricks, even taking over full control of my laptop, without success. He is going to contact Thomson to see if there are any compatibility problems with the Dell 1350 adapter as there are known ones with other Dell adapters.
I suggest Plusnet should not supply this router and further reduce their charges so that customers could supply their own trusted versions.
I have a new brand dell inspiron 1525 laptop and everytime i boot i get a message "Dell wireless WLAN card wireless network controller stopped working and was closed.
A problem caused the application to stop working correctly.Windows will notify you if a solution is available.I use windows vista premium and dell wireless 1390 802.11g.
I have a Dell Inspiron 14R running Windows 7 64 bit. I have had my PC from this past November; about 7 months.
I was using my PC, and suddenly, I started to experience wireless problems. I was unable to get onto the internet. Other devices on my wireless network are able to log on to our network, although that is irrelevant because my radio wasn't picking up anything at all, when it always had from that same location. The connection worked fine using an ethernet cable. After the problem occurred, my Targus Bluetooth mouse also stopped working. This is what I have tried:
Going into Network and Sharing Center, disabling my network adapter, and then enabling it again. This usually does the trick. After doing it over 5 times, it never worked.
Doing a simple system restore. I attempted restoring 3 different times to an update within the last week, each of which failed (probably another issue altogether).
Re-installing my WLAN CARD Driver, and then restarting. This didn't solve the problem. Checking the Device Manager. It reported that the wireless card was running properly.Using the DW WLAN CARD Utility. It says under the Link Status tab, after Connection Status, Radio Disabled. I tried right-clicking the icon in my Notification Area, and then clicking Enable Radio. It then shows an alert saying "The WLAN card is still disabled. Use the wireless switch or hotkey to enable it." Pressing Fn + F2, which is also supposed to enable the radio, did nothing, with no action or sign whatsoever from Windows. I also tried running tests under the Diagnostics tab. All hardware tests passed, with the Connection test giving me this alert again: "The WLAN card is still disabled. Use the wireless switch or hotkey to enable it," and then failing. The same thing happened when running the CCX Client diagnostics.
I have new Inspiron 1720 running Vista with the Dell wireless 1390 WLAN mini-card. I will be connected to the wireless network just fine, but it will then disconnect. My problem is I cannot re-connect to it without having to do a total restart. I go to the place to refresh the list, and it finds nothing. I ask it to repair the network, and it can't becasue it cannot find a network. I have at least 4 other networks in the area that I can normally see, and none appear when I hit the refresh button. But I totally restart the system, and everything works fine again (until it drops again).
View 13 Replies View RelatedI recently received the blue screen of death on my labtop so I used the system restore cd and wiped the entire hard drive clean. Afterwards I knew to extract the drivers from the drivers and utilities cd. I extraced the wlan card since this is what has been controlling my wireless at school and everywhere else. The little tower icon doesn't appear in my task box on the bottom of the screen nor is it anywhere where I can enable it. The only place I see the driver is in the add/remove folder in the control panel. Furthermore the blue light doesn't appear when I flip the switch to the on position.
View 3 Replies View RelatedI regularly get this message (but not everytime) when I start up Windows Vista Home Premium 32-bit.
"Dell Wireless WLAN Card Wireless Network Controller stopped working and was closed.a problem caused the application to stop working correctly. Windows will notify you if a solution is available."
Then I get this following message:"Solution Found: Address a problem with your WLAN card.Your WLAN card has stopped working properly. This is a network adapter that allows your computer to connect to a wireless network. To find out if an updated version of your WLAN card is available, contact your device or computer manufacturer."The strange thing is even though I get this message I am still able to connect to the internet via a wireless network. So there is no problem as such it is just annoying to keep getting this message when Windows starts up.I have checked on the DELL Support website and I do have the most up-to-date driver already (Or I think I do).
The message refers to my:
Dell Inspiron 1520, Dell Wireless 1390 WLAN Mini-Card (with driver version 4.170.25.17)
I've recently added a Dell Inspiron 620 to my home network. Since it was close enough to hardware to my U-Verse router, I moved my Dell Wireless WLAN 1502 Half Mini-Card to my older XPS400. What I cannot find out is whether or not there is an XP driver for this card.
View 1 Replies View RelatedI have a Dell Inspiron 6400 laptop running and with a Dell 1390 WLAN mini-card installed and a Broadcom 44/10x100 integrated controller.
Unfortunately I've never been able to get this laptop to function with my wireless Internet.
Everything's working out nicely, and the computer connects to the network smoothly. After 5-10 minutes of full and unproblematic Internet connection the computer crashes the wireless network i.e. the Inspiron and all other computeres connected to the network is disconnected and my wireless network no longer shows up on the list of available networks.
The network works perfectly with every other computer I've used with it.
I've installed the newest drivers for both the 1390 and the integrated controller from this site. And my Vista is of course also fully up to date.
I've also tried turning the antennae settings to "aux" - Alas, to no avail.
Older model Inspiron 1545' using the 1397 WLAN card. Has been working fine, until perhaps the past two weeks. Now it frequently drops out, requiring manual disconnect and reconnect. Tonight Internet very slow on that laptop.
There are other devices using the same wifi (including this iPad used to post this), which connect to the wifi and Internet no issue. To me, its pointing to the laptop - either the WLAN card itself, or something in the laptop starting to fail (the laptop does have issues restarting - where it won't do that unless left for say 30 mins).
I'm suspecting a recent windows update or mcafee security update - no other software has been installed or updated.
I've tried changing antenna setting from auto to aux with no change to the above. Have checked for newer drivers - the laptop reports the version we have is the latest ( from 2009) - although they are the windows driver. Running windows 7, 64 bit - as supplied by dell when laptop was brand new. should I give up on the 1397 card and use another USB wifi adapter ?
I'm trying to get my wireless turned back on after using an Ethernet connection at work. It's a Latitude E5400. The message I'm getting is that the DW WLAN Card is still disabled and to use the DW WLAN Utility to enable it. There is no icon in my notification area and I cannot seem to locate this "Utility". I'm assuming I'm missing a driver.
View 3 Replies View RelatedLaptop D800 with WLAN 1350 mini PCI wireless adapter The wlan 1350 was working fine until I updated the wlan drive to ver 4 and the new wlan utility In our office we have about 27 D800 and we need to use a specific mac address in order to access the network with ver 3 I was able to change the mac address from the registry or using a 3rd party utility ie smac 2.0 without any problem now after I updated the wlan 1350 driver and the wlan utility the minute we change the mac address we get windows error – wlan error and must be close etc I narrow down the problem to the waln utility if I unistall the utility no more error.
View 3 Replies View RelatedI think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies View RelatedWireless card is Dell Wirele4ss 1490 Dual Band WLAN Mini-Card
Each time I try to launch the Dell WLAN Utility I get a message:
"Internal configuration is inconsistent. Please restart the machine to resolve the problem."
Restarting does not solve the problem.
The wireless card connects fine with Windows managing the connection. But what about the Dell Utility? What can be done so it will launch and I can let it manage the wireless connections?
I have reinstalled the Driver and utility using R115319.EXE
I have a Vostro 1500 and cannot connect to a wireless network with a dell 1395 WLAN minicard os XP home, what are possible solutions?
View 1 Replies View RelatedI have an XPS M1330 with an internal Dell Mobile Broadband Mini-card 5720 VZW for Verizon. The Dell Mobile Broadband Utility (DMBCU) now reports an APPCRASH upon launch only when Windows Internet Explorer 8 (IE8) is installed. I'm certain it is due to IE8 and probably the required MeadCo Zeepe add-ins that are required for dmbcu.exe functionality. Upon uninstallation of IE8, the dmbcu.exe works flawlessly.
Is there any update or plan to update the DMBCU for the 5720 VZW minicard?
A few days ago when I updated my dell inspiron 1545, the wifi icon in the utility tray is always showing an x (this means he doesnt find any connections). But when I click on it it says i am connected with my internet and shows different kind of wifi nearby.
View 1 Replies View RelatedI just bought the VOSTRO 260S Slim Tower from dell. I have problem to connect to the wireless in my house. I got other labtops and tabs in my house which connect well to the wireless...Here is my ipconfig:
Microsoft Windows [Version 6.1.7601]Copyright (c) 2009 Microsoft Corporation. All rights reserved.C:UsersAnGi3>ipconfig/allWindows IP Configuration Host Name . . . . . . . . . . . . : AnGi3-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoWireless LAN adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected (code )
I have a Latitude E6400 that I had to rebuild due to a hard drive failure, with a Dell 1510 WLAN card installed. Upon reinstalling the Dell WLAN Card Utility however, I now receive the following prompt every time I log into my machine:“Reminder: The Dell Wireless WLAN Card is still disabled. Slide the Wireless ON/OFF switch to enable it.”
I am able to connect to wireless networks without any issues, and when enabled it works great. I do however like to keep my wireless radio off when I am not using it. I certainly don’t need the software to tell me that my WLAN card is disabled when I already know that it is. How do I disable this message from coming up each time I log in? I don’t see any options in the software to simply disable reminders, however I don’t want to disable the software from loading altogether.
Cant' seem to find any updated drivers for this card. Just installed new AP's supporting wireless 'n', and can't seem to get the speeds past 54MBS. AP's are configured properly. Under the setting in device manager I can see the rate setting for 802.11(b/g), but not n. If this card is not 'n' compatiable why state that it is. Hoping to get an updated driver . My version is 5.10.235.12 1/7/2011.
View 10 Replies View RelatedI have a Dell XPS 9100 system which has a Dell Wireless-N 1525 PCIe WLAN (a/g/b/n) card which I would like to transfer into my new Dell 8500 which comes with a Dell Wireless 1703 WLAN (g/b/n) half minicard. This is because the Dell 1525 is dual band and is faster than the Dell 1525. I would like to get the procedure for installing the Wireless-N 1525 PCIe WLAN card into the XPS 8500 (and replacing the 1703 half minicard).
View 9 Replies View RelatedI can't connect to the internet using wireless. Can access the internet just fine with my cable. All I see is the red x and its not able to detect any networks. I reinstalled drivers, it works fine for a second, and then dies out again.
View 2 Replies View RelatedWill this wireless card work with a N wireless router?
View 2 Replies View RelatedI want to change my wireless mac addres, but i can't.
I tried from the device managger on the usuall way, i tried from regedit and i also tried with mac changer programms.
In the regedit, the Network address changed, but when i type the "ipconfig /all" commant to the cmd it show me my default mac address.
I also tried to connect to the network witch use mac filter (that's, why i want to change my mac) , but i can't.
My Laptop can't connect to the internet wirelessly. Wireless card can connect torouter but once connected to the It can't acquire an IP address.
View 5 Replies View RelatedI have a 1395 Wlan mini-card in my dell vostro 1510 version A21 and it has stopped allowing internet access. it says limited or no access and when i ran the connection diagnostices it failed the authentication.last time the software was update was october 6, 2008.
View 9 Replies View RelatedI had to default my wireless router " Netgear WGR14V6" and since then I haven't been able to connect with my wireless card. I can physically connect to it with a cable but I can't access it with the wireless card. When I look at the properties it says that it is working fine but I can't seem to find where to change the "SSID and the security phrase". Usually when it is up and running it has a status button and when you click on it there is a tab that you click on and it shows you the SSID and the rest, but now since it is not connected there isn't anything that I can find to change this.
View 1 Replies View RelatedI have dell inspiron 640m with Wireless 1390 WLAN Mini-Card and it is connecting perfectly with any other routers. but i can not connect it to CISCO WAP4410N router ! i tried several times but no way.
I can connect IPAD , Samsung Smart tv , Denon network radio and toshiba laptop but not my inspiron laptop. I think my WLAN can not get th WAP4410N IP address !
I got a Studio 1535 Laptop which comes with a Broadcom WiFi card that is named "Dell Wireless 1397 WLAN Mini-Card" in the Hardware Manager.
I tried to connect to my ZyXel WiFi router but though i had it all configured right, Windows would always come up with "you entered the wrong key". After playin around for some time i figured out that everything just works fine when i switched my router from WPA-PSK to WPA2-PSK. My router features both WPA-PSK and WPA2-PSK but since my other PC does only support WPA-PSK the router is set to that and i want it to stay that way. I just don't want to buy new hardware for all my other computers.
So is this WiFi card strictly incompatible with WPA-PSK? Does'nt make any sense to me because WPA2 works just fine! Normally they are downwards compatible aren't they? (Moreover, when setting up a connection i can choose WPA-PSK from the dropdown menu.
find a Driver for the NIC for windows 8 64 bit Pro. I have a Dell Latitude E6410 and the driver from Microsoft worked for the most part but I was having issues connecting to my Windows phone 8 device (Nokia 920). First I though it was my phone but when I tried other devices like my Surface I could connect with no problem. I am also running Windows 7 32 bit, when I boot up that OS I had no issues connecting to my phone. I also had issues with stable connections to my 5Ghz Wi-Fi access point. Well if any of these symptoms sound like something that you been going through then check this driver out. I used the 43224AGN 802.11 a/b/g/n 2x2 driver and now everything seems to work.
View 2 Replies View Related
