How To Configure VPN With Public IP
Nov 21, 2012How to Configure VPN SERVER with Public IP. Is there any free and secure tool so that we can create multiple vpn client and access the vpn network, Requirement Only one public Ip.
View 3 Replies
ADVERTISEMENT
How To Configure Public Ip Address On A Router
Oct 8, 2012i received a public ip from my ISP and need to configure to enable access my server remotely
View 1 Replies View RelatedCisco WAN :: How To Configure 857 As Public Gateway
May 25, 2012I have a set of public ip(/29) using adsl2+, is it possible to config cisco 857 as a public gateway so i can assign public ips to my computers?? before i upgrade to adsl2+ i was using cisco 678, it can be config as a public gateway without problem, but now i have ot use adsl2+, can't use cisco 678 anymore..
View 8 Replies View RelatedCisco WAN :: 5510 - Configure All Public Ip Add On Router And ASA?
Aug 16, 2011 how to configure public ip on router 1841 and ASA 5510. let me show you my issue that: i have router 1841 ( for F0/0 use pubic ip add 10.10.10.1 /30, and F0/1 use other rang public ip add 20.20.20.1 /24) and on ASA 5510 i use public ip add E0/0 20.20.20.2 /24 ) all this for public ip add and my lan ip is 192.168.0.1/24.
could you let me know how to configure on router 1841 and ASA 5510. for router 1841 if you use private ip we can use nat but for all public ip add how can we do it?
Cisco :: 800 - Configure Router Such That Accessing Public Ip
Oct 16, 2012I have a problem with my web application. I cannot access it from my internal network using my static public IP (i.e 49.123.456.7). However I can access it from an external network using my static public IP. Is there a way for me to allow access internally as well as externally?
I am using Cisco 800 series router. Here is my configuration:
Header 1
Current configuration : 2549 bytes
!
! Last configuration change at 09:35:38 SGT Thu Oct 18 2012 by xxxxx
[Code]....
Cisco Firewall :: 5510 Need To Configure Public IP In Few Devices
Apr 13, 2013I have a few devices that the manufacturer told us we have to set with a public IP (No Natting) We have Internet ->ASA5510-> Switch 3550 with 3 vlans. Up to now we have always use Natting to configure internet access to specific devices. I heard setting up a witch with one VLAN connected to the internet and all other internals is a bad idea. that was the only Idea we had.
View 3 Replies View RelatedCisco VPN :: Configure ASA 5510 Remote Access For 2nd Public Interface?
Jun 4, 2013Our ASA 5510 was configured with a public interface, a DMZ interface, and a private interface. I have a remote access VPN using AnyConnect client and LDAP authentication for Active Directory. We are changing ISP (groan!), which means all new public IP addresses. The new circuit is installed, so I have a second public interface (same security level as the first public interface, wholly different IP address range) enabled on the ASA. I hope to transition whatever I can, which means get the VPN access through either public interface. Can I just enable client access on the second public interface at the Anyconnect Connection Profiles tab in ASDM? That seems too simple. Can they share the one address pool?
View 1 Replies View RelatedCisco Wireless :: Aironet 600 OEAP / AP Is Able To Configure 2 Public IP Address Of DMZ-WLCs?
Dec 9, 2012Does the AP is able to configure 2 public ip address of the DMZ-WLCs?
like ip 1.1.1.1 in my US data center, whereas a second ip 2.2.2.2 in my EU data center?
Cisco VPN :: ASA Version 8.2(5) - Public-to-Public L2L / No Return Traffic?
Apr 2, 2013One of our vendors requires using a public ip address to setup a site-to-site IPSEC vpn. We only have one public ip address and that will be used for the vpn endpoint and for internet access for the local network. I've setup policy NAT from our local network to the outside interface. I'm also using the outside ip address for the crypto map. The tunnel setups successfully and the Tx count increases anytime I try to ping the remote network, but the ping fails and the Rx count does not increase. According to our vendor, we should be able to ping the remote network and connect using port 443. When trying to connect using port 443, I see a SYN timeout in the logs. I'm not sure if the problem is on their end and they're rejecting our traffic, or if something is misconfigured on our end. I'd like to make sure that I have everything configured correctly before I go and point fingers at them.
Local Network - 10.10.9.0/24
Remote Network - 20.20.41.0/24
Remote Peer - 20.20.60.193
.ASA Version 8.2(5)
!
hostname ciscoasa
[code]....
Cisco Firewall :: ASA 5520 8.4(1) Public WAN To Public DMZ?
Jul 10, 2011i have an ASA 5520 8.4(1) setup as follows
public wan
|
|
ASA-- public dmz
|
|
private lan
i need to allow https traffic to a server in the DMZ that will have a routable IP address will just an ACL suffice ?which interface do i apply it to ? wan or dmz ?i dont need a NAT since the DMZ is a routable space?
How To Use More Than One Public IPs
Apr 23, 2012We have a T1 connection at our office with a block of 5 IPs. The external interface is simply one RJ45 jack. Currently we have a home spec router connected to the external interface, and then a switch connected to the router. Certain ports are forwarded to our server in the home spec router for things like OWA, etc.I would like to start putting our other IPs to use. Is this usually done by having a switch connected to the external device and then have multiple routers connected to the switch? Or is it one router capable of VLAN or is it something entirely differentReally, what I want to know is what the rest of the industry typically does to use their multiple IPs.
View 7 Replies View RelatedHow To Make PC As A Public IP
Jan 4, 2011how can i make my PC as public IP? do i need to wrt som servlet program 4 it?and how to mak my mobile as public IP by setting its domain?
View 1 Replies View RelatedUse 2 Public IP's On One Router?
Jan 5, 2012Recently I added a second web-server to my network. I have 2 static public ip's from my isp. My setup will be:
isp(two static ip's)---->Verizon MI424WR Router--->server 1 and server 2.
I currently have server 1 with IP: 192.168.1.100 and server 2 with IP: 192.168.1.101
If I have the two static public ip's xxx.xxx.xxx.27 and xxx.xxx.xxx.28. How do I forward xxx.xxx.xxx.27 to 192.168.1.100 and xxx.xxx.xxx.28 to 192.168.1.101
I read somewhere where i have to set the iptables on the router to do it. Do I have to buy a special firewall/router to do this or can mine do the trick.
Possible To Have Public IP To More Internal Addresses?
Oct 24, 2011Is it possible to have more public addresses to more internal addressees? I have an internet provider which is in control of my router and he is telling me it is not possible. It's a Cisco router and I have static IP address.
View 1 Replies View RelatedCisco :: Setup DMZ With All Public IPs
Apr 30, 2011I'm trying to setup my DMZ so all my servers will have public IPs assigned to them. I'm currently trying to use two interfaces on each server, one with a private IP and then one with a public IP. All my internal traffic will go over the private interfaces...this is working. However, I'm having a problem trying to get it so the public interfaces work. Ultimately, these will be VM Hosts and have VM guests on them, each guest will have it's own public IP.
View 14 Replies View RelatedWhy Can't Access Public Folders
Apr 6, 2011am running 2 PCs (one desktop and one laptop) both with windows vista home premium, both are in a home group, are connected by a DIR-615 D-link router/wireless access point, and have file sharing and network discovery enabled, but when I try to access the public folder on either PC from the other I get "The network path could not be found".When I try to troubleshoot this it tells me my modem is having connectivity issues and attempts to find out "why I can't connect to the internet" which is extremely bizarre, as this has nothing to do with the internet connection, I simply wish to access the public folder on a private network
View 7 Replies View RelatedCan't Connect To Public Wifi
Mar 1, 2012For some reason I cannot connect to a local public wifi location that I frequent. It has really been a problem. Everyone around me connects no problem but I do not. I have no problem connecting to other locations.below is network environment.I have Mcafee and running windows 7. I use netgear modem and hawking 300n extender. [code]
View 3 Replies View RelatedHostname Entry Against Public IP?
Sep 5, 2012We have one business application, accessed across GCC region by having a single entry with individual computer hosts file, ie123.123.155.116 myappl.mycompany.com and other than Bahrain, all countries are able to successfully resolve the hostname (application only works against hostname (Oracle EBS)) against this entry with the hosts file. Now, prior contacting the ISP in Bahrain (where internet is regulated due to the current political situations) we need to know whether anything could be done from our end to resolve this issue.
View 2 Replies View RelatedCannot Access Public Wifi?
Feb 20, 2013New Dell laptop w/Windows 8 OS. Cannot access wifi in local cafAt network & sharing center - Access Type: No Internet Access - Getting full signalHave McAfee Antivirus Plus installedHad this problem before and completely uninstalled/reinstalled McAfee. Problem was solved temporarily
View 5 Replies View RelatedNo Access To Public Wifi
Feb 19, 2013I am able to connect perfectly at home but no longer in public areas such as Starbucks, etc. I do not get the public website to agree to the terms and connections. My laptop tries to connect to my homepage and skips the log on page then freezes and I receive an error message that there is no internet connection. When I go to "Data Sharing Center" it states that I am connected.
View 1 Replies View RelatedHow To Make Ssid Public
Jan 22, 2011I need to change from a SLAN (hidden SSID) set-up to a set-up where anybody is free to see my SSID. My friends need to access my internet connection on their phones but cannot find the SSID.
View 1 Replies View RelatedCisco VPN :: ASA 5520 SSL Using Different IP Than Public
Nov 6, 2012I am trying to configure a SSL VPN on a Cisco ASA5520. Unfortunately the port 443 of the OUTSIDE interface of ASA is already in use by Microsoft Outlook Web Access and I cannot change the configuration of Outlook. This configuration already in place prevents me to use the public IP of the ASA as Cisco VPN ip address for the webpage. I don't either want to use a different port so to keep life easy for the users.I have some public IPs available that I can use so I wanted to use one of them instead of the ASA's OUTSIDE interface.
View 7 Replies View RelatedCisco WAN :: Second Public IP On ASA 5510
Apr 7, 2013My ASA 5510 is configured with a single PUBLICIP1 on the outside interface. All internal hosts 192.168.0.x are behind the ASA firewall and NATed to PUBLICIP1 including a few site-to-site VPN tunnels. This is also true for DMZ. Now, I would like to add a second PUBLICIP2 to the ASA and map it to one internal host ONLY - For eg: 192.168.0.25. How can I do this without effecting the existing setup? Since my entire internal subnet 192.168.0.0/24 is NATed to an existing PUBLICIP1 how can I exclude just one host (192.168.0.25) and bond it to the PUBLICIP2 for all ports.
This is what my current OUTSIDE interface looks like.
interface Ethernet0/0
duplex full
nameif OUTSIDE
security-level 0
ip address PUBLICIP1 255.255.255.224
!
How To NAT A Public Interface In Xenserver 5.6
Mar 14, 2012I've got a 1U server that has Citrix XenServer 5.6 installed on it. It has 2 physical ethernet interfaces, both connected to the same network switch, one interface has a public IP address on it and the 2nd interface has a private rfc1918 address on it (this can be changed if necessary). I use the private1918 interface to do administrative tasks, transfer data amongst the servers and guest VMs, etc. I'm given a /29 IP address allocation by a friend to use for my servers (using his FTTP internet connection). I want to set up a few guest VMs, but really most of them do not need to be using public IP addresses.
Is there a way to NAT the public interface on XenServer so that guest VMs can use rfc1918 addresses & get online, instead of using the few IP addresses I am given? Also how would I enable portforwards so that I can get applications to work like asterisk, SMTP, etc.?
Listing of interfaces on the Xenserver:
Code...
Cisco :: Cannot Access Internal To Dmz With Public Ip
Jan 4, 2013I cannot access Internal network to DMZ with public ip but i can access public servers in DMZ with External network.
View 1 Replies View RelatedCisco :: Presenting Public IP To ASA Over OSPF?
Oct 29, 2012I will be provided with /29 public IP address from my ISP. The idea is to run OSPF between ISP and my ASAs over private IPs so /29 is presented to ASA. This is because I will be using 5 out 6 available IPs on my ASA so I cannot use them on the routers.I need to run HA in Active/Standby mode on ASA, terminate site-to-site and remote access VPNs on ASA, and use static NAT for kit in DMZ network I am trying to figure out how to present this public IP range on ASA. Should I create two subinterfaces on physical interface towards OSPF area and assigned private IP address on one of them for OSPF and public IP on another and then setup a failover on each subinterface.
View 4 Replies View RelatedCisco :: Port Forwarding (NAT) With One Public IP?
Feb 11, 2012command for port forwarding to a few applications (inside hosts) when you only have one Static IP (Public) which is used for many to one NAT (Overloading)?This is the config for the many to one NAT.access-list 1 permit 172.16.0.0 0.0.255.255 ip nat inside source list 1 interface Dialer1 overload What command is necessary to forward ports to certain applications?
View 1 Replies View RelatedCisco :: Possible To Use 1 Private IP Through VPN And Same Mapped With Public IP?
Aug 25, 2011Is it possible to use 1 private IP through VPN and same private IP mapped with Public IP? For example 192.168.0.1 is configured in VPN tunnel. i m able to ssh on both ends. ( VPN phase 1 and phase 2 gets completed)But when i map 192.168.0.1 with some public IP problem starts. when i try ssh i see public IP in my destination firewall logs. IPSEC: Received an ESP packet xx.xx.xx.xx "mapped public IP". The decapsulated inner packet doesn't match the negotiated policy in the SA, The packet specifies its destination as
View 2 Replies View RelatedHow Can A Public Ip Be Traced Back To Private Ip
Mar 1, 2012How can a public ip be traced back to private ip. for instance if the ip is 5.5.5.5 it is traced as
4.4.4.4
2.2.2.2
1.1.1.1
10.10.10.10
5.5.5.5
I thought it could be VPN but then u still need a public facing ip , or can it be the fact that the public ip is router to nat and from nat to internet but then 10 range will need to be converted back to public which does not happen as from the private 10.10.10.10 it moves to the next router which is an isp device and not clients one?
Broadband :: Configuring DSL With 5 Public Address?
Jun 23, 2011We will acquire a DSL connection with 5 static public address. How can I use the 5 static public address using a linksys router. Is it depends with linksys router model?
View 2 Replies View RelatedCisco :: Multiple Public Subnets On Asa
Mar 2, 2012I've currently got my ASA (5505) serving a /28 public subnet. I've ran out of IPs, so my DC has issued me an additional /24 subnet that they have routed to my ASA. What needs to be done on my ASA so be able to use these new addresses? I've been trying to search and not been able to find a good answer (some say I shouldn't have to do anything, everything else references NATing, which I currently don't do and would rather not do).The servers I assign these to, I'd like them to have the public ip assigned directly to them.
View 5 Replies View RelatedCan't Access To My Computer Via Public IP And Through Router
Mar 11, 2012I have a little problem here. I running on my computer (WinXP-SP3) Apache, MySQL, TeamSpeak3, etc.I setting up my router COMTREND Multi-DSL CPE to forward some needed ports to my computer (i use static IP) and it works fine. Anyone from the world can access to my TS3 and Webpage. I have already registered domain name for my Public IP, setting up DNS Server.I have internet access via router and i can connect on my TS3 server, webmail, etc.. ONLY through LOCALHOST. If i want connect via IP/domain_name i just stop on router WebAdmin. Can i access from MY computer to MY computer via public IP and through router?
View 1 Replies View RelatedSet Up A Public Wifi Network For Village
Aug 19, 2011I like to create a village-wide wifi network...The purpose is to provide a public service so although we'd have to charge to cover capital and operating costs but the purpose would be to run it on a non-profit basis. If it does by chance make a profit it would be donated to local community projects so we should be able to get support from local business and residents if the technical solution requires their collaboration.
View 1 Replies View Related