I have a photo contest, but its seem it using IP based system.So that after done giving vote there, I can't give ore vote there.I wonder, because there's many contestant get till 2000 votes at the same contest and look so easy to collect it.[CODE]
View 1 RepliesHow do I change 1310 Autonomous AP to a Controller based AP for 5508 WLC?
View 6 Replies View RelatedI'm just finished with the wizard of my WRT54GL and follow the instructions in my user's manual I enter in the Web-based Utility of the router but I was surprised when I see that the language is French?! Once I choose the language for the wizard - english, it was english but now the Web-based Utility is in French. For luck I know some French from the high school but I prefer to work with English. How to change the language of the Web-based Utility from French to English
View 9 Replies View RelatedHow do I...add a dos based computer to a network running windows 2003
View 1 Replies View RelatedIs it possible to log when a user connects/disconnects their VPN session? They are connecting to an asa 5510.
View 5 Replies View RelatedI work from a computer that can not install any software(locked out), but I want to record good quality audio (at least 192kps) from websites, I've spent along time googling for a website that would record the audio (audio from a different website, i.e. streaming radio, etc.) which I could then download to my USB stick. I just can't find a website that does this, but I think I'm just not using the right search words
View 2 Replies View RelatedI live in an apartment where my internet is included in the rent. In all the rooms there is an ethernet socket buillt into the wall. I'd like to know how to connect a router to this for wireless internet. I have tried one router, but it buggers up the ip address and brings down the network for the entire apartment complex. I've done this twice now and don't fancy waiting another week for the technician to call out to reset things. I had a friend who lived in a simalar complex, rj45 sockets on the wall etc. He has a thomson router, which has a little black box plugged into the ethernet socket on the back of the router. Into this little black box goes the ethernet cable from the wall socket and bam, he has wireless internet, even though he has no access to the main router or switch of the apartment block. It's not failed once either. Both the router and the little black box need mains power.I think it was originally for a WIMAX connection. It's small, maybe 2"X3" inch?
View 3 Replies View Relatedis it possible for a windows7 laptop to back up to an external hdd that is usb attached to a mac ? ie. we are a mac based office for a small building contractor firm and one of the lads has a sony laptop that comes to the office each day... we need all our files backed up in the office somewhere as simply as possible...
View 1 Replies View Relatedi am planning to buy 867vae router and i would like to ask you a few things the configuration is through cli only(because i am not familiar with cli) or it can be web based ? the basic configuration for dsl and routing are preconfigured or i have to do everything from scratchf? if someome has configured let say a draytek router, is it the same with this router or its a different world?
View 9 Replies View RelatedI have been configuring anyconnect VPN. The requirement from customer is to configure MAC address based authentication for anyconnect clients. I have gone through various cisco documents. I couldnot find this option explained. Is MAC address based authentication possible in anyconnect vpn without having AAA server in place?There is an option to select end point attribute as MAC address, while creating Dynamic access policies. But at the host scan configuration of Cisco secure desktop, there are no options for performing MAC retrieval.
My ASA is running on version 8.2(1) and ASDM version 6.3(1) and a memory of 512 MB RAM. Any way for MAC based authentication in cisco anyconnect VPN.
I am having a problem trying to get to my root view. I am trying to set up some views to allow restricted access to one of our routers.I am running C2800NM-ADVIPSERVICESK9-M Version 12.4(20)T as the IOS and have the following AAA entries in my config
View 1 Replies View RelatedHow can I configure police-based nat to allow ICMP-only traffic on asaos 8.4.1 or 8.3?On 8.3 it was very simple:global (outside) 1 interface ,access-list outside_nat_outbound extended permit icmp any any,nat (outside) 1 access-list outside_nat_outbound.
View 10 Replies View RelatedWe are testing the use of a web based tn3270 emulator through our ASA5510 SSL VPN appliance. We have it configured to use clientless SSL VPN. Access to the 3270 session works internally, however when we connect to the SSL session, the session does not load. Each application that we are testing uses activex components that are downloaded to each connecting client. Are there settings that need to be addressed to allow for the downloading of ActiveX components. Also, one of the 3270 applications uses java instead of ActiveX and this app is having the same problem. working with web base tn3270 emulators functioning over ASA SSL VPNs?
View 1 Replies View RelatedIt has been know to all of us that ASA is the great device for creating SSL VPN web portals and the ability to publish several plugins. My interest is about IOS based SSL VPN. Is there anyway to publish RDP plugin into the portal built with 1841 router?
View 1 Replies View Relatedwhat web-based programs do i need to install a 887VA? I tried Cisco CP express version 2.1, not a supported device.
View 2 Replies View RelatedI want to apply QoS policy on a particular VM for specified port range only. I have created following script file but that doesnt work. I mean it doesnt apply any policy on vm residing on Veth1.
config t
ip access-list acl_in
101 deny tcp any any eq 443
exit
[Code].....
I'm having an issue with a Linksys RVS4000 which doesn't appear to be behaving as I think it should.I need to forward a port (Single Port Forwarding) through to an internal NAT host. However, I only want that host/port to be accessible from one host on the internet, for security reasons.
I have created the port forwarding entry and this works fine. I then created two rules in IP Based ACL - one to block all access to that port from the WAN interface and one to allow access from a single host.
However, it appears that when a port forwarding entry is added, it will completely bypass the ACL and allow all traffic for that port/host by default.Is this the correct behaviour?
Firmware version is v1.2.11
is it possible to use the asa dhcp server function to assign based on mac address (yet)? I have read numerous places that it was not possible (as of 8.2) at least, but I am workin in 8.4. I should have mentioned that I've already tried commands (asa 5510 btw)
View 4 Replies View RelatedI'm having a few problems at the moment with a zone based firewall setup. The more I looked into the problems the more I question whether I need the ZBF or not.My network is pretty simple. 1 Internet connection and 1 LAN interface and a few site to site vpns to the router.So what do people think to having this kind of set up and not using a ZBF?
View 11 Replies View RelatedI have cable modem (one of those Motorollas), ehternet cable connected to desktop pc (usb would be probably the same), Windows7 - host, Virtual Box -> CentOS6 - guest; no static IP, no router.I am trying to connect guest and host together and both to the Internet, there are suppose to be 3 ways to do that:
1) Adapter 1: Host-only adapter + Adapter 2: NAT; I've been trying to get it to work for a while now, but I cant; here is some info: VirtualBox Configuration (no IP for the guest? I've seen it there before though, so there might be a way to do that)
2) Bridged adapter; I think that the only way to do that is with a physical router at home or office etc; VirtualBox 4.0.2 Network Connections in Windows 7 - YouTube
3) NAT and port forwarding; I think this might be the only option, here is some info: url...
Recently I have noticed that my browser, both firefox and chrome are loading rather slowly, as well as any type of streaming media, and downloads. I have performed spyware/adware checks and haven't come up with anything major. I am kind of at a loss as to where to begin to diagnose the problem. I had not installed anything new on my pc before this started. Also my laptop that is on the same network is running fine.
View 3 Replies View RelatedI have Site(s) Ani....i=1,..10 sites which communicate with site B to access a website/application. That's simple enough. However, the traffic is http well we primarily don't need https on ipsec tunnel right?. But since attacks related to eavesdropping of traffic come a real reality once it gets terminated by the ipsec device on both side.I have two options either to purchase a third-party ssl certificate to encrypt the traffic between two nodes or use a custom made one.I don't want to use a custom made one because this make the browser prompt an ugly untrusted certificate message; its ugly not from security perspective but for clients inconvenience and assuring users confidence in our systems is a critical issue for us. ?
a) How its possible to remove ugly certifcate message from user screen? Does the company need to register its certificate to some kind of CA body? or what ...
b) Due to some tcp acceleration issues, ssl traffic slows down the traffic between the nodes so we only require the encryption to stand just during the initial handshake when the username and password are being validated ; after that we want to revert back to http?
I am configuring a new ACS 5.3 system. Part of the rules is that I want to match the users specific AD group membership, and match appropriatly to an identity group.What i'm trying to do is say that if the user is a member of the AD Group (G-CRP-SEC-ENG) then associate them with the Identity Group SEC-ENG. The under the access service, authorization portion, i assign shell profiles and command sets based on Identity Group.It seems that the ACS server will not match the AD Group for the user, and it will match the Default of teh Group Mapping portion of the policy every time.
I tried several configuration choices from : AD1:ExternalGroups contains any <string showing in AD>, AD1:memberOf <group>.Is there something special i need to do in the Group Mapping Policy to get it to match and active directory group and result in assigning the host to an Identity Group?
I have a Cisco 2851 (with a 4 port switch module) that I am trying to set up with two different internet connections, and have it route traffic out to them based on the source IP. One connection is a 50mb Comcast connection, another is our T1 that our servers are hosted on. The goal is to guide server/phone system traffic to the T1 and have the rest default to the Comcast. I currently have the 2851 connected to our Layer 3 switch (Dell Powerconnect 6224) with a subnet created between them. Static routes have been created on the 2851 back to all of our existing subnets. Traffic flows internally without a problem between the subnets and 2851 (and vice versa). I set up the 2851 with route-map's in the NAT to control the flow of traffic, with the default route set to the Comcast connection. Default route works great, speedtest shows full speeds and everything looks great. The problem happens when I apply my route-map policy to the internal LAN interface with the ACL list of IP's that I want to guide to the T1 (with a next-hop of the T1's IP address). I tested some tracert's and pings from one of the IP's in this list and they would stop at the T1 modem and not go any further. I did a "show ip nat translations" and noticed that the "outside" portion (right half) was blank for every IP that was in the ACL or related to the T1. So my guess is it looks like this is not doing NAT for the T1? I double-checked that I had my "ip nat inside" on the LAN interface and "ip nat ouside" on the T1 VLAN interface and Comcast interface and they were there.
View 6 Replies View RelatedI have setup a basic PBR config to route Http and Https out of a different interface (fa0/0/0) but for some reason http traffic is still going out of the Gi0/1 interface.
Config attached minus the crypto stuff and the publics have been changed.
Is Cisco 3945 router support URL based filtering . For example to block website [URL] but not the main site [URL].
View 1 Replies View RelatedLast night I had a crack at setting up PBR on my companies Cisco 1811.Joy, I thought, it's actually working. Alas I was wrong, the addresses were getting translated to our ADSLs external ip address but routed over our EFM.What I want to acheive is to send all HTTP(s) traffic from our workstations over the ADSL (FastEthernet1) whilst all other traffic and VPN goes out over our Bonded ADSL (FastEthernet0). There is also a minor failover in place for traffic routed to the ADSL in the route-map PBR_VLAN1. The servers are on IPs 200, 202, 204 and 240.
Anyway, I have re-written the configuration and xxx'd and x.a/b/c'd all the IP addresses I want to keep secret. Need to make sure that the PBR is correct, and will do what I want it to? I have a very small time-frame to get this correct and I dont want to fudge the bucket so to speak.
I currently have a asa 5500. is there a way to authenticate based on mac address throught the vpn client. We are haveing problems with useres using there home computers to connect. Yes they are smart enought to install the client and copy the profile.
View 1 Replies View RelatedI want to buy an AIR-SAP1602I-E-K9 and I don't know if I can configure a MAC-BASED ACL with this AP, because I must permit the access of the wireless netwok only to determined wireless devices.
View 4 Replies View RelatedI am using ACS 5.2 and attempting to authorize users through TACACS to Nexus 5.1 code. I seem to have ACS setup correctly based on documentation I received through here. The problem is that the NX/OS doesnt seem to be operating as expected.
View 2 Replies View Related1)is there any methods to let LMS 4.2 discover Cisco devices based on specific ip like Loopback address ? coz in my Cisco devices i have more than ip address configured?
View 4 Replies View RelatedCurrently we are having a 2 ISP for Internet. Need to achieve redundancy for IPSEC VPN using the domain.
Requirement :Will configure a domain and assign two public IP address from 2 service providers. Will set the priority for the public ip address and do the manual change during the ISP failure.We will provide the domain name to the clients to setup the IPSEC VPN.So incase of failure by one ISP, we will change the priority in the domain to point to the availble address.So that we can reduce the downtime and no need of configuring new IPSEC VPN tunnels.
Question :Whether we can achieve this in Cisco ASA 5520.Or do we have an alternate solution to overceome this solution.
I set globally the QOS on my infrastructure and I want to monitor graphically the usage of each classes.I'd like to do that on my COREs Switchs which are Catalyst C6509.I can achieve that in command line, but it's not user friendly and it's not possible to have daily/hourly graphs.
So the idea is to find the value in the MIBS and put it in MRTG graphs.The only problem is that I cannot find it in the MIBS.