I work from a computer that can not install any software(locked out), but I want to record good quality audio (at least 192kps) from websites, I've spent along time googling for a website that would record the audio (audio from a different website, i.e. streaming radio, etc.) which I could then download to my USB stick. I just can't find a website that does this, but I think I'm just not using the right search words
View 2 Replies
Im curious to know if there is a way, to stream music to my iPad from a drive connected on my network? Either by USB to the router or a hard wired NAS. Im aware of programs like Streamtome but this requires a mini server running on a PC which is want i want to avoid!
I know there are things like the slingbox etc but i cant believe its needed! If you can access the files on a MacBook on the wireless why not an iPad?
A customer has an ASA5520 and 2 ISP routers with one WAN link each, and wants to split the load over both routers based on source IP ("natted" IP on ASA). I found this excellent doc on the topic: {URL}. Using PBR to achieve this is an option I was looking at, but I have come across a possible loop doing this with 2 routers. Setup:
-----------CE-1---------ISP-1
| |
| |
ASA55020---- HSRP |
| |
| |
-----------CE-2---------ISP-2
Both Routers receive default routes via BGP, and customer networks are propagated via BGP as well (i.e. the customer can specify the return path for the traffic). The ASA5520 forwards traffic to a HSRP virtual IP for redundancy purposes. If one router or ISP fails, all the traffic should use the other router/ISP. The customer wants to specify which traffic is sent over which link, by defining nat rules on the ASA. e.g. traffic sourced from the network 10.10.1.0/24 will always use ISP 1, and traffic sourced from the network 10.10.2.0/24 will always use ISP 2.
My problem: if I use route-maps on both routers (CE-1 and CE-2), sending part of the traffic to the other, and one ISP link fails, in my opinion I have a loop, since part of the traffic will get sent back to the router it came from. Is there any other was to achieve my goal without using PBR? I have looked at CEF and GLBP, but I cannot seem to find a way to load share via source IP.
i bought wireless camera dcs942l everything works but my sd card 32 gb is not recording the camera is not recording in my sd card i formated sd card still not recording camera works good quality picture network working but not recording on my sd card and i can not record in my computer
View 5 Replies View RelatedHow to setup recording on dcs 932l?
View 1 Replies View RelatedI would like to record the camera feed (per 5 min. files) on my server (ubuntu or windows)
I Installed a FTP server and tried the option "always" in the "video clip" section, but unfortunately, it seem not possible to record more than 10 seconds files every 60 seconds . I think that this is a bug ?
Do you know, if we have a possibility to record the camera feed, I would like to manage it from the webcam or with an external program running as a service.
I can't get the Video to record to the SD card, nothing happens. Snapshots record fine.
Firmware is 1.01
I have a DCS-932L camera setup in my living room with motion detection activated in DView. During the day it works great, but after nightfall the camera shows random lines in the [poor] video. These lines are being picked up as motion and as such the camera records all night long taking up massive amounts of disk space. Even when I put the camera motion detection on 'lowest' value, it still picks it up.
View 10 Replies View RelatedI need configuration of IPCAM dcs950g and dcs5220 for recording on a NAS which is DNS-313.My DNS-313 is connected in a network which can be access both locally and remotely, same as my both model of IPCAM. How should i type in the path textbox input?
View 1 Replies View RelatedIt didn't fill it up completely, it stopped at the 200 meg free mark, however I have cyclic checked (which btw is not mentioned anywhere in the manual). I assumed this option would cycle by deleting the oldest file to continue recording.
View 1 Replies View RelatedI record on motion to an external drive using samba. I get around 20MB before it just stops recording (samba full condition signaled). This is a one TB drive with nothing much on it.
View 2 Replies View Relatedmy DCS-2121 :
The scheduled recording or scheduled snapshots is not working. I am running the camera standalone and using the web based configuration, storing the images or avi's on a ftp or samba server.
No matter what i specify, it records when triggered (by motion in my setup). All the other settings like, samba, ftp, video, motion detection, and so on is working fine - but I can't configure it to only record like between 10-16 every day. It records all the time - no matter what I select and what I enter in the schedule scheme.
we want to record voip telephone?Presently im using wireshark on a laptop to test the rspan session
Here is how it's configured
CORE_SWITCH is
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 28 WS-C3750G-24TS 12.2(52)SE C3750-IPBASEK9-M
2 52 WS-C3750G-48TS 12.2(52)SE C3750-IPBASEK9-M
[code]....
Ive created the vlan 33 on my core switch and remote SPAN VLANs 133 Core switch is vtp server so i double checked on all switch and vlan 33 and 133 are present When i listen to conversation with wireshark we are only recoding voice of the one who is answering and we don't hear the other person talking?
How do I...add a dos based computer to a network running windows 2003
View 1 Replies View RelatedI would like to make my audio MP3 stories and audio books available to the visually impaired and others who can no read for any number of reasons. I have already written and recorded the material in MP3 format.I find that virtually everywhere I look I must pay, or the upload limit is so small that a story of any size can not be uploaded. I have an Ipage web site and two blogger blogs where I could post the link for listeners to download the text. I do need to do it all for free, since I am on S.Security.
Stated differently; I want to offer my audio books and audio essays for free from my blogs or website. I can not seem to find who will store my recordings (large enough to actually be a book) for free. The site should be easy to navigate so impaired patrons can use it easily. I did find one, yourlisten.com, but the user has to agree to buy something from their advertisers before they can download my audio text. For the user, then, the service is not free.Does any one know who will store and share my audio text for free?
Actually i need a streaming server that supports both audio(mp3) and video formats(mp4,avi..).But it should work in multicast and should possible to stream with VLC media player.now i'm trying helix media server.In this what are the procedures to configure helix sever in multicast.and how to stream media from it.Or Any other streaming server is there that suits for my need.
View 1 Replies View RelatedNeed drivers for my sensus network notebook with win 98se.
View 1 Replies View RelatedI am able to stream audio from a website when i connect directly to my cable modem but when the router is connected it doesnt work. I have tried resetting the router, ping the website and get "request timed out"The firmware is up to date version 2.25 I have tried other computers that access the same network and they also cant stream the audio.I have also turned off my windows 7 firewall with no luck I can access other sites I visit and stream audio just fine so I wonder if the router may be blocking something on this website?Is there a way to allow an audio stream to come through that may be blocked by the router?
View 1 Replies View RelatedIm trying to locate the PDLM for the RTP audio for the 4500 series switch,
System image file is "boot flash:cat4500-entservices-mz.150-2.SG.bin"
Cisco WS-C4507R+E (MPC8245) processor (revision 7) with 524288K bytes of memory.
MPC8245 CPU at 333Mhz, Supervisor IV
Last reset from Power Up
8 Virtual Ethernet interfaces
48 Fast Ethernet interfaces
100 Gigabit Ethernet interfaces
403K bytes of non-volatile configuration memory.
It seems to be an easy task for routers:
[URL]
But not for these 4500's
[URL]
I have a user that uses an ASA 5505 in NEM to have his/her laptop and Cisco IP Phone at home. The ASA 5505 establishes a tunnel to an ASA 5510, which is connected and speaking EIGRP to our core switch. Off of the core switch we have our CCM cluster.
The issue happens on the first call after a long period of no calls. After if happens on the first call, he/she can continue to make calls without the issue. I though it was a timeout issue, but his/her ASA configuration is the exact same. Also, he/she is using the same group policy, tunnel-group etc. as everyone else with the same setup.
This issue happens regardless if she has a PC behind the phone or not.Internal calls and external are both affected.
I am aware that most one-audio issues are RTP connectivity issues between the two endpoints. I can clearly see in the routing table of all of our routers, that the route to the subnet her phone is on has not changed for days, and she has had the issue within that amount of time.
I'm looking for a good place to start troubleshooting that doesn't require me to to a pcap. If all else fails, I will do a pcap.
I am trying to hook up a wireless projector and connect an old audio mixer to my Laptop wireless and in sync so that I can operate the projector video and audio from my laptop anywhere in the room. I have a 30' by 60' sanctuary in my church an old audio mixer hooked up to key board, mics and speakers and one cordless mic. I am considering purchasing a Epson Powerlite 96W Projector and the optional wireless LAN module but wondered if there was a way to hook up a Epson EX7210 projector wireless as it does not accept the optional wireless LAN module. Also we currently have a great singer and no musicians so I am trying to find church presentation software that would include lyrics, background effects and music to accompany our singer.
View 1 Replies View RelatedIs there any remote access software which allows one to hear the audio of the computer connected to?
View 2 Replies View RelatedIs it possible to transmit Audio and Video wirelessly with UPNP. Let say I would like to watch youtube videos or any movies that is streaming live on my PC in my room on my TV (with UPNP).
View 1 Replies View RelatedI bought my first Dell laptop (Inspiron 7720) and I can't make my bluetooth audiosystem (Logitech Mini Boombox) to work. I've got positive experience on Fujitsu-Siemens Amilo Xi2550 and on HP Compaq 6530b, where I had to just download another drivers for widdcomm bt adapter. I tried to do this trick o this computer, but I get only three bluetooth peripheral devices, which I can't install, because there is no driver for them. What shoud I do to make audio transfer through A2DP to work?Bluetooth drivers are working, I am able to pair the device. Problem is in instalation of all services.
View 1 Replies View RelatedI've got an ASA 5505 running 8.2 configured for solely as an IP phone proxy, it is the default gateway for the cucm box and PRI router, its inside interface is directly attached to the same subnet as all internal phones as well. Calls can be placed from either end, but after call is established, proxy phones does not hear audio from internal or pstn phones. The proxy phone registers with cucm with the remote internal IP of the phone that obviously cannot be reached by corp network.
Debugging from pri router shows the rtp traffic destination is the internal ip address of the proxy phone 192.168.0.50, why is the phone registering with its internal IP 192.168.0.50 rather than its Natted external IP 50.50.50.50 that can be reachable by cucm and other phones?Proxy phone is a 7945, after it registers, I do not see it under sh phone-proxy secure-phones, or sh phone-proxy signaling-sessions while on a call.
ASA Proxy config
interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1nameif insidesecurity-level 100ip address 10.10.33.25 255.255.255.0!interface Vlan2nameif outsidesecurity-level 0ip address 65.x.x.24 255.255.254.0!boot system disk0:/asa823-k8.binftp mode passivedns server-group DefaultDNSdomain-name ----.comsame-security-traffic permit intra-interfaceaccess-list inside_access_in extended permit ip host 10.10.33.10 anyaccess-list inside_access_in extended permit ip any host 10.10.33.10access-list inside_access_in extended permit ip host 10.10.33.5 anyaccess-list inside_access_in extended
[code]....
I have the WAP4410n connected to a SLM2008. I tried to change to 100Mb the port in the switch but then I lost the connectivity.
But it's a giga port and it must work as a giga port. The new firmware must resolve the problem, and not to be a work around. Or what will be the next, not to use N, only G, or only 20MHz or...
I need the WAP4410n for streaming audio and video?
capturing high-quality audio (44.1 kHz, 12+ bits) and send it over WiFi to a receiver.
Microphone->[Audio module+Transmitter] -> Wireless Link -> Receiver
When I view my DCS-932L camera in the Main Console of DViewCam, I can here the sounds in the room being viewed. But if I record the video and play it back, there is no audio on the playback. I have the microphone on the camera enableI now have sound recording, however, the audio is about 3 seconds behind the video. Is there a setting somewhere to keep them synchronized? I have checked all the video sync checkboxes I can find.
View 4 Replies View RelatedAdvanced networking but have managed to get our small office IP PBX running over a SIP Trunk. The only real problem we are having is choppy outgoing audio when there is other heavy outgoing traffic on the network.
My understanding is that I need to set some QoS parameters, which I have played with but it didn't seem to be useful. I mostly dealt with allocating bandwidth. I now think I need to somehow prioritize the outgoing RTP packets from our PBX (which runs on a PC on our LAN) to avoid the choppy audio. My research shows this can maybe be done with something called DSCP 46 and my router does support that -- how to exactly set the configuration.
Our router is a Cisco rv180w.
I have been having a problem with my 4400n dropping connection when streaming video / audio.It is connected half duplex to a cat2950 and the media server is mediatomb on a linux box the client is a ps3 presently.
View 3 Replies View RelatedI recently bought a Bose Soundlink bluetooth speaker and have paired it with both my ipod touch and ThinkPad w500. The iPod Touch sounds great, but the audio coming through the speaker via the w500 sounds like it is clipping, especially at normal-loud listening levels. Both the soundlink and the w500 have the latest bluetooth driver updates installed. The clipping occurs even when the main volume (and iTunes/Spotify) is turned down to 50% power.whether there is a way to reduce the "power" of the bluetooth signal so it does not cause the speaker to distort. Audio played through the speaker via 3.5mm from the w500 sounds great even at high volume.
Currently installed bluetooth drivers:
Bluetooth Enumerator (Microsoft)
ThinkPad Bluetooth 2.1 with Enhanced Data Rate (Broadcom)
Bluetooth Hands-free Audio (Broadcom)
Bluetooth Remote Control (Broadcom)
Since a few days my WRT120N gives an audio alarm (beep) about every 10 secs. Cannot find how to overcome this or find the root cause. Installed new s/w version. H/W reset. Nothing works.
View 2 Replies View RelatedOn several calls i noticed that the outgoing audio stops for 5..15 seconds randomly. I'd say it happens on an average of every 5 minutes.
When this happens, i can see that the value after "Call1 Packet error:" increases by one. Why just a wrong packet may stop the outgoing audio for so long? i've much more packet losts (about 3%) but they give me no problem at all.
Since a little and cheaper Handytone HT502 gave me intermittent audio too, but the effect was much better (audio still stops, but in a second it comes back), i wonder if is there something i can do by tweaking the WRP400 settings, I'm still using firmware 1.01.00.
