How To Check MB Rate Coming In To The House
Jan 9, 2011how can make sure i am recving mbps that i am paying for?
View 2 Replies
ADVERTISEMENT
Cisco WAN :: 861-W Traffic Coming In And NAT / PAT?
Oct 20, 2011I am slowly getting this router configured........I am up and running. Traffic from All nodes inside can go outside. My next step is to configure traffic coming in to go to my server. I have Web, FTP, SMTP and POP running on the same server in my LAN. I need to us NAT/PAT to direct incoming traffic to it. I belive I have this done correctly, but obviously not...I only have port 80 configured in the config file, if I can get that to work the rest would be the same........
View 1 Replies View RelatedCisco WAN :: 2921 Gi0 / 1 Is Not Coming Up
Mar 7, 2013why Cisco 2921 Gigaethernet 0/1 is not coming up ? I also tried to connect the interface to another SWITCH with no joy.
ME3400 (ISP's switch)<-------------MPLS link--------------> Cisco 2921 Gi0/1 >>>>>>>>>>Port not coming up
I tried connection between ME3400 (ISP's switch) and spare switch and the INTERFACE of spare switch was in UP/UP state .Troubleshooting I did so far on Interface Gi0/1
1> Changed ths speed/duplex manually and revert it back to auto
2>diable keepalive
3> Tried differnet LAN cable with no luck
4> Please see HIGHLIGHTED part (in red colour) of "Show controller Gi0/1" command
I am pasting some of the SHOW command output R2921_MMP#sh run int gi0/1Building configuration.[code]
Lag Spikes On My PC Not On Any Other Computer In House
Oct 8, 2011I've been having problems with my internet on my PC. I use it mostly for gaming (League of Legends specifically but it's also hooked up to my Xbox for internet connection), and I frequently (about every minute or so, sometimes more) get bad lag spikes when playing games. My character will freeze in place while I click wildly about and then appear somewhere else (and die or lose a kill).
The thing is, I'm connected to my Apple Airport which all other devices in the house are connected to (Wii, dad's Mac desktop, my Mac laptop), and only my PC gets this lag. Seems like a fairly generic problem but I have no idea what to do about it, so if you need more information let me know.
[code]...
Ethernet Cable Too Run Around My House?
Dec 15, 2012What is the best Ethernet cable too run around my house?
View 3 Replies View RelatedGetting Wireless Into Other Places In The House?
Oct 23, 2011my dad wants me to get on expanding our home network (getting wireless into other places in the house). i do consider myself pretty tech savvy ( i just built my computer from scratch) but this is a little bit beyond my comfort zone. the 4 ports on the router are keeping me tied up and the size and layout of the house are restricting the wireless range
provider: comcast cable
modem: arris TM502G (comcast provided)
router: linksys wireless-n wrt160n v3
4 pcs running windows xp to windows 7
3 laptops running xindows xp, windows 7 and windows 7 starter (netbook)
1 xbox 360
1 ps3
(looking to add netflix capable bluray players on 2 tvs in the future)
the downstairs layout (router is the star)
the upstairs (red is range of current setup thats a stretch) (blue wanted coverage)
not to scale and a quick draw the top half of the house is off set from the basement area. i used google earth to estimate the range from the router to the outside area of my wanted coverage area and its roughly 80 feet through 4 walls and the flooring i do not believe theres a single router capable of doing that without dropping some serious cash down.as is all the ports are currently tied up, and id like to expand the number of ports, along with getting wireless to the area i pointed out, i have the capability of pulling hard wire through out the house also.
Two Separate IP Addresses For Same House?
Jun 22, 2011Me and my girl friend both work from home doing freelance work using the internet. The company we do freelance work for allows one agent per ip address and checks the ip address for multiple agents I guess.I only have one modem, router, and two computers, but I believe they are on the same ip address.Is there a way to have two different ip addresses so we wouldn't have any issues with our work here?
View 19 Replies View Related2 Wireless Routers In 1 House
May 18, 2011Can 2 wireless routers work in the same house if they are from 2 different internet providers? the reason why im asking is. my girlfriends daughter is getting here internet from cable. and its not very fast speed. i can get AT&T U-verse Internet. from my phone company for half the price and get more speed
View 2 Replies View RelatedWiring A House For Ethernet (Cat 6)
Feb 4, 2012I'm considering wiring my house for Ethernet (I've chosen Cat 6 cable.). I've read some online guides about this. However, I can't seem to find any that would work with my house, which is a Pueblo-style flat roof with parapets. However, I want to tear out as little drywall as I can. There's already wiring for coax and phone.
View 7 Replies View RelatedMark Traffic Coming From S1 To R1 - S2 To R2 - And S3 To R3 On Switch 2
Mar 25, 2013I have a small problem and I'm a bit confused, Cisco suggested that you should mark traffic as close to the end devices as possible. So I wanted to try marking the traffic coming from S1 to R1, S2 to R2, and S3 to R3 on Switch 2 (Cisco Catalyst 2960) with the following config:
[code]...
Cabling / Cards :: Connection Coming And Going?
Jul 6, 2012I have network: 20 PC's conected to a switch (ordinary switch), from switch to a router (for DHCP and internet conection), Router is connected to a cable modem.
Lately an issue arised. One PC started having problem witch connection (PC is windows 7, up to date). PC instead of 192 addres is getting 169 (i need to highlight it is a problem with only one PC). That means the PC is connected to the Router but it is not getting proper IP addres. After changig the addres to static the connection ws fine for few days and then in networc connection icon (botom right) it came up with 'unidentified network' message. I changed the patchleeds, even changed the connection with known working line (from outlet to patchpanel) and the connection was coming and going. Then I changed network card with the same resoult. I noticed strange thing: While the IP is 169 or when 'unid net' when I unplug the cable from outlet then plug back and do so couple times in one moment the connection is back and stable but only for some period of time. Cables had been re terminated with new jacks and at the patch panel. Drivers for network card are up to date.
Why is the connection coming and going?
Possible To Have Two Routers Coming Off Another / Does It Need To Be Proper Chain
Feb 17, 2011I live in a house with four other people so I need a lot of free ethernet ports.I currently have three routers daisy-chained together and I want to add a fourth, but I can't seem to.When I plug it up, pages refuse to load on computers connected to it. I read something about disabling DHCP, but I have two other routers chained to my primary and didn't need to do that. This one's branching off the main one though, instead of being at the end of the chain.I'm trying to hook up either the Linksys 4-port wired router or the 8-port one (I have both). I tried disabling DHCP on it and setting the IP thing to 192.168.2.1 instead of 192.168.1.1 and it worked for a few minutes, then nothing.I also tried that with the TRENDnet one and the same thing happened (had to reset that one to factory defaults).Is it possible to have two routers coming off another or does it need to be a proper chain? Why did I not have to disable DHCP on the others and they still work fine?
View 4 Replies View RelatedWhy Does Wifi Keep Dropping Out And Coming Back On A Second Later
Nov 21, 2012For some reason when I'm watching a HD video or I'm downloading a file, on my HP laptop my wifi decides to stop,disconnect and then start up again This never occurs on my iPhone iPad Xbox or any other laptops in the house.
View 1 Replies View RelatedPrinter Is On Network But It Is Not Coming Online?
Mar 1, 2012I am unable to view my qms 2200 on my window 7 network. I have checked drivers, ip addresses and just about everything I can think of I have even hired 2 different tech people who were unable to get as far as I got and charged me an arm and a leg. the message I get from the trouble shooter is contact your network admin and the printer is offline. What or how do I find the what seems like a simple solution to get the printer online before I stub my toe on drop kicking this thing....
View 1 Replies View RelatedCisco Routers :: RV042 To ASA VPN Not Coming Up?
Apr 24, 2013i am trying to make a simple Site to SiteVPN between two offices, one has Cisco ASA and one has RV042 router.when traffic initiated from ASA side, i keep getting this message in Debug and tunnel wont come up
.
[IKEv1]: Group = A.A.A.139, IP = A.A.A.139, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.Apr 26 00:15:53 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
whereas if traffic initiated from RV042 side, i keep getting this message in debug and tunnel wont come up.
Apr 26 00:43:44 [IKEv1 DEBUG]: IP = RV.RV.RV.139, Oakley proposal is acceptableApr 26 00:43:44 [IKEv1 DEBUG]: IP = RV.RV.RV.139, IKE SA Proposal # 1, Transform # 0 acceptable Matches global IKE entry # 6Apr 26 00:43:44 [IKEv1]: IP = RV.RV.RV.139, Connection landed on tunnel_group RV.RV.RV.139Apr 26 00:43:45 [IKEv1]: IP = RV.RV.RV.139, Connection landed on tunnel_group RV.RV.RV.139Apr 26 00:43:45 [IKEv1]: Group = RV.RV.RV.139, IP = RV.RV.RV.139, Freeing previously allocated memory for authorization-dn-attributesApr 26 00:43:45 [IKEv1]: Group = RV.RV.RV.139, IP = RV.RV.RV.139, PHASE 1 COMPLETEDApr 26 00:43:45 [IKEv1]: IP =RV.RV.RV.139, Keep-alive type for this connection: DPDApr 26 00:43:45 [IKEv1 DEBUG]: Group =
[code].....
Cisco WAN :: 3750X SFP-T Not Coming Up On 100 Full
Apr 16, 2013I try to connect 3750X (15.0.1(SE3)) with PC or router that is interface card is fixed to 100Full on 3750X-12S-E I plug a SFP-T, this SFP is ok: [code]
But with Speed and duplex fixed the interface is up arround 1-4s and move to down and errer-disable.
Cisco :: 4402 WLC / LMS 4.2 Threshold Coming
Mar 1, 2012I'm using RADIUS and FlexConnect APs. The issue is intermittently users will lose connectivity as if they're de-authenticated. Their clients still believe they're associated to wireless but they have no network connectivity. On Windows 7 we receive the exclamation point over the signal strength indicator.
There doesn’t seem to be any rhyme or reason as to what is causing this. It doesn’t seem to happen at any particular time intervals or anything else I can identify. Sometimes users will go entire days without experiencing connectivity issues sometimes they can’t go five minutes. When the clients are experiencing the issues they cannot even ping their default gateway.
The setup was initially the following:
Site A: 1142N APs and RADIUS server (server 2003) users are authenticating to.
Site B: Flex 7510 running code 7.0.116
Between site A and site B there is a site to site VPN with no restrictions.
After some time of working with TAC and not getting anywhere I setup the following:Site A: 4402 WLC running code 7.0.116 connected the same 1142N APs HREAP mode. I had the same issue with connectivity with that setup.Today I changed over to local mode and as of yet I haven’t had reports of connectivity issues.
When running ‘debug client MAC’ I see no indication of connectivity issues. I also have an NCS and I don’t see anything indicating what the issue is there as well. I’ve tried with both enabling and disabling ‘H-REAP Local Auth’. We seem to experience the issue in H-REAP standalone mode as well.
No Network Connection In Certain Parts Of The House
Dec 29, 2012I can't connect to the wireless modem from most parts of my bedroom. I can connect to the modem from the hall next to my bedroom. Can't from my brothers bedroom, but can from my parents' bedroom. All using the same laptop. Once I connect to the modem, and move into one of the rooms where I can't connect, I do stay connected. I can ping the modem, but I get very high results (800-1500 ms), while I get 1-5 ms in other parts of the house. I only get extremes, good connection or very bad connection, haven't found anything in-between.I've tried changing the network channel (I've tried 1, 6 and 11), but that didn't work at all. I've been away from home a few days and these issues started while I was away. Nothing obvious changed in our house while I was away. Just that my sis got a new phone (but can a phone honestly be responsible for this?). And my laptop has found a new modem in the neighborhood. Previously everything worked fine. I had great internet all over the house. Something is just blocking the signal.
View 1 Replies View RelatedR6300 Can Use Multiple Extenders In House
Jul 22, 2012I have a Netgear R6300 Router and I bought 2 Netgear WN2500RP range extenders. My router is in my basement (not ideal I know but it's where everything is home run) and I have one extender on the main floor which works great, but want another extender on second floor or outside.
View 4 Replies View RelatedInternet Dropping For One Or Two Connections In House
Apr 24, 2012Randomly the internet connection for either my, my son's , or my husband's pc drops. This also can happen with the X-box. The router lights indicate it is working and the rest of the connections will be fine just randomly any one of ours will fail until we reset the router. Two of the pc's are wired, one is on a plug (devlo) and the xbox is wireless. I phoned BT, our isp, who sent an engineer out. It turned out the BT rep told the engineer I had reported no dial tone on my phone line and if I had allowed them to investgate this fictitious fault it would have cost me £150 for a call out.
View 4 Replies View RelatedHow To Setup Ethernet Ports In House
May 31, 2011my house has 4 ports in each room, 2 coaxial, 1 for the net, and one for a TV, and there's a phone jack and a Cat5e Ethernet port. From what I have learned, all my ports lead up to a "closet", and I have found it. It has all the connections for the LAN, and everything else. I am confused on what to do next. I see that there are blue Ethernet cords connected to the ports on one side, and that they are not connected to anything on the other. I thought I had to buy a switch for all these ports, and I haven't done so yet. where am I supposed to connect the modem to the internet. It is currently connected to the internet coaxial port, which it then connect to the VoIP switch, and is then connected to everything else. Where is the coaxial port that I have to plug it in to, and what is it labeled?.
View 1 Replies View RelatedLaptop Around House Without Relocating DSL Modem
Apr 26, 2011If I have a wireless adapter do I still need a wireless router? I have DSL service for my desktop but just got a new laptop and wanted to be able to use my laptop around the house without relocating the DSL modem. However I wasn't sure about the adapter vs. the router.
View 2 Replies View RelatedDevice Is Not Providing Wireless Around House
Oct 23, 2012My device is not providing wireless around the house. What should I do?
View 1 Replies View RelatedD-link Dir-655 :: Spread Wifi Around Whole House
Mar 24, 2012Just purchased two DIR-655's to spread the WiFi around the whole house. I realize now that the 655 is considered "older" when it comes to technology but I am really not using these for anything other than full coverage of our house. I am just looking for any recommendation people may be able to offer as to how to get the best out of these.
Same SSID everywhere so that the clients will see it one big network. Different channels so that there is no interference. No security enabled. (I am in the boonies, no neighbors and I have walked all the way out to the road with my laptop. You can't even see the network) My guess is that the clients will automatically switch to the AP with the strongest signal correct? Any utility that can tell me which AP I am connected to?I am running a Windows 2008 domain here in my house with the server performing DHCP and DNS functions. [code]
Really Annoying Music Coming Over Visited Website
Jun 28, 2012I'm getting the same really annoying music coming over any website i visit.
View 3 Replies View RelatedLinksys Wireless Router :: E1000 - LED Not Coming On?
Feb 10, 2013My wireless router (E1000) was accidentally unplugged. Since then the wireless LED light doesnt come on and the router cannot be detected. All the other lights are on. I tried to reset it but I dont think it worked, since the power LED didnt blink as its supposed to do after holding reset for 10-15 seconds (or more!!).
View 5 Replies View RelatedCisco Firewall :: FWSM (in 6509) Is Not Coming Up?
Oct 29, 2012our FWSM (in 6509) is not coming up, when tried to sesssion up using "Session slot 1 proc 1" command,It is giving error , "Tyring 127.0.0.11 .....connection timed out remote host not responding".
In "show mod" command output at Switch in IOS console: under Card Type Section: it is showing Model & Serial Number correctly, Under MAC address sectino: displaying some MAC address But in Online Diag Status, it showing "Unknown" for Module 1.
We tried re-seating in other slots, but of no use. Giving same error. Some of other forms are saying it is the issue with 128 Mb CF image problem, FWSM is no more reachable from 6509 IOS console. We even tried using FWSM console (using PC-Conse & LCP Console) but FWSM is not contactable.
Cisco :: LMS 3.01 Stuck On System Coming Up Page
Sep 22, 2011We are running LMS 3.01 and have been currently experiencing issues regarding the login page. It has been stuck on the page that states "Server Not Ready - System is coming up - You will be redirected to login page soon". It has been like this for the past few days:
I've tried restarting the daemon services as well as rebooting the server which has made no difference.
Improve Internet Speed In A Fraternity House?
Aug 28, 2011So I am currently living in a fraternity with 60-70 other guys and our internet is slow at best. Currently we have 2 business connections from time warner cable and each of those connect to a apple wireless router. We dont have the speed i think we should and the range is very poor, and one of the routers seems to not work all the time.can give me to speed up the internet in my house,
View 3 Replies View RelatedInternet Has Dropped Throughout The House But Apps Still Work
Jun 6, 2011yesterday at 6:30 am my internet was working fine.yesterday at 7am it quits working.the computers through the house are 2 desktop PC's, one netbook, and one laptop.the 2 pc's connect to the router via a switch.the netbook and laptop use the wireless router.the wireless router is not specifically just a wireless router, it goes both ways (hardline and wireless)after 7am, the netbook still had connectivity to the internet via wireless even though my laptop did not.the internet is still connected to all of them, browsers like google chrome, firefox, and IE7 do not work. but just like a browser, steam's store will not load.here's the funny part, the netbook still had browsing ability until 7pm last night.we checked all the ip's and MAC addresses on the computers to make sure nothing was conflicting.nothing was.packets were coming in and out at normal rate but none of our browsers worked.we do have comcast, and my father told me that comcast gives you norton for free for using them.i have read on here that removing norton magically solves the problem but 3 of the 4 computers does not run norton. and i also do not see the logic behind this.we have also recieved emails from comcast exclaiming that they have reports of "bot emails" coming from our I.P.'s could this have been an attack on our network or some network virus?
View 5 Replies View RelatedGet Strong Wireless Performance In A Large House?
Feb 20, 2013I am trying to brainstorm some ideas for the best wireless set up in a house that is 2 stories and 8500 SQ Feet. The house is wired with ethernet jacks.
Option 1. ASUS RT-N66U and Hawking Hi-Gain HWREN1
Option 2. Two Apple Airport Extreme's at either end of the house.
Option 3. Asus RT-N66U and Linksys WRT54G (DD-WRT Firmware).
What about the placement of the equipment? Should there be one router/access point on each floor or just two at either end of the house.
Any Way To Increase Strength To Main Level Of House?
Mar 9, 2013We have wireless in the house, the router, etc is down in the basement where my office is. Is there any way to increase the strength to the main level of the house? Our house is standard size, but it seems to weaken upstairs.
View 4 Replies View RelatedEthernet Switch Only Works On 1 Computer In House?
Feb 21, 2013I bought a "Nexxt Solutions 8 ports Ethernet Switch" and it only allows me to use the internet on the first computer that I plug into one of the Lan ports. I get a Limited Connection MessageI did some research and found something about a DHCP Server and automatic IP assignment, but I can't find a comprehensive tutorial on how to setup this.I'm sure the solution is simple.
View 2 Replies View Related