I have a laptop and a pc...i want to transfer loads of data (about 100 gb) from the laptop to the desktop.I have NO means to do it wirelessly.how to accomplish this so seemingly cumbersome task via wires? (i read in some other places about connecting it via lan wire and then changing the ip addresses.where on my desktop will i see the data of my laptop?
View 5 Replieshow can i connect my laptop in network so that i can transfer the data from another pc to my laptop.Also provide the information how to use ethereal software for internet traffic?
View 1 Replies View RelatedI would like to connect 3pc via switch and let them connect and be able to transfer data from one pc to another using network
View 1 Replies View RelatedOld XP and New W7 side by side. Wanting to transfer file, pics, docs, ect. form one to the other. I can see the old XP from the new W7. Through W7 I can get to documents and settings on the old XP, try to open that and says I dont have permission. Old XP c drive shared on network. Still missing something.
View 11 Replies View RelatedI would like to conect a USB device to a computer using WiFi instead of the USB cable the device has. The thing is that I'm not sure about the drivers. Is there any USB Wireless device that transmits the USB data "raw" and the receiver plugged to the computer gets the data with the driver of the remote device in the own PC?
View 1 Replies View RelatedI have a new Palm Vx and have installed Version 3 Palm Software followed by an upgrade to 4.0.1.This works fine with the new Palm but I can't transfer all the data from my old Palm (almost 12 years of stuff) to my new Palm.
View 1 Replies View RelatedI am currently using Win XP in my desktop. I am planning to buy a Laptop with Win7 o/s. S how to transfer data from XP desktop to Win7 laptop uisng the LAN cable?
View 2 Replies View RelatedI have 2 cat 5 cables one has the network jack end on it and the other end has a usb end? What is this used for? Can it be used to transfer data from one computer to another?Also how can i tell if I have a crossover cable?
View 3 Replies View RelatedI have recently been encountering file transfer probles across our network from wireless to wired, and vice versa. The transfer will start and process about 50% and then we lose internet connection, and it requires a router reboot to get connectivity again?
View 7 Replies View RelatedWindows 7 32 bit laptop ----> Windows 7 64 bit PC with USB network adapter.
I'm trying to move a folder from one computer to the other. There are about 300 files totalling 3mb.
At around "234 files remaining", the transfer freezes, and after a minute or so, the network connection on the destination computer is shown as Disabled. If I right click and choose "Enable", it makes the attempt, says "connection failed", and then "It is not possible to connect at this time. No network was detected. You may need to plug in your network cable to complete the connection."
What will fix it is unplugging the USB network adapter and replugging. But it only allows a little bit more transfer before it happens again.
I tried initiating the transfer from one computer, and again from the destination (bringing the files to it), but the problem occurs just the same. On additional attempts it will reconnect to the other computer and allow me to browse the files, but the connection crashes again without any more progress. My internet connection is fine otherwise, doesn't do this unless I'm transferring data across the network. I disabled Eset real-time protection but have windows firewall up (I'd rather not turn it off).
Which network provides the highest data transfer rate?
View 1 Replies View RelatedI was assembling and testing some custom production machines here, and I had to perform a data transfer between two windows 7 machines through an HP 1400 switch. I saw 100MBps transfers for the first time. I only wish I could get the main network to operate that fast.
View 13 Replies View Relatedjust upgraded my ASA5510 from IOS 8.25 to 8.42Everything is running fine apart from one VPN between ASA5510 and cisco 887V router.The VPN session is up but no data traffic is being passed through The tunnel although this VPN was working fine with old IOS. The tunnel is up but no data is passing through IKEV1 session.
protected vrf: (none) local ident (addr/mask/prot/port): (10.0.12.0/255.255.255.0/0/0) remote ident (addr/mask/prot/port): (172.16.0.0/255.255.0.0/0/0) current_peer xxxxxx port 500 PERMIT, flags={origin_is_acl,} #pkts encaps: 0, #pkts encrypt: 0, #pkts [Code]...
I have a laptop running Windows XP that has a wireless card inside.
I have a Single Board Computer (SBC) running Linux that has an 'wireless access point' connected to one of it's Ethernet ports. I want to be able to transfer data between the laptop and the SBC wirelessly (cabling is not an option)
The 'wireless access point' I am using is the EnGenius EOC5611P - it can be configured for:
1. Access Point
2. Client Bridge
3. WDS Bridge
4. Client Router
I don't know which one of these I need,so working that out would be a good start!
RV110W connected to ISP via PPPoE. MTU is default setting - 1492. IPSs tarif - 100 Mbit/sec IN, 40 Mbit/sec-OUT.When the laptop is connected to RV110w via ethernet the data transfer rate is 45 Mbit IN / 25 Mbit OUT.When a laptop is connected to ISP directly without a router a data transfer rate is 95 IN / 35 OUT.
View 0 Replies View RelatedI've recently upgraded the configuration on one of our 1130 series standalone access points. I've implemented RADIUS authentication, WPA2 encryption etc. in an effort to make our network more secure. While this part seems to be working as planned, our data transfer speeds have taken a major hit. On our test AP, with only one laptop connected, the laptop will report a connection at 54 Mbits. When using any speed test service the speed reported is approximately 15 Mbits. We have 100 Mbit internet, and desktops connected to ethernet show much higher speeds. When transferring files via our own LAN, data transfer rates average approximately 2 Mbytes/second. I've tested this on 3 separate laptops, some relatively new, and it seems they all get the same speeds.
Long story short, our wireless seems to be operating under a third of its reported speed.
I am going back to college and I will need a router. Both my roommate and I were on the same router went over our bandwidth usage a number of times last year. I've done a bit of research and have come up with a few options: Asus rt-n56u, netgear wndr 4500, and the apple airport extreme. Both my desktop and laptop pc so I'm not sure if that effects the outcome. I am going to need a usb port for an ext hdd, which all of them have. All of the routers have a 5hz signal for better streaming. Would I be able to use the apple airport? It seems the have the best reviews. But I question the compatibility and some of the reviews due to possible fanboyism. Also, If I connect my desktop to the router via a crossover cable and have an ext hdd hooked into the router can I transfer files to the ext hdd and stream that data over a 5 hz signal?
View 2 Replies View RelatedI'm using Pix 501 with firmware: Version 6.3(3)I have problem with Pix 501:
+ transfer rate data between interface outside and inside very slow, even between 2 interface inside.
+ I have test file transfer between 2 PC connect via interface inside.
+ Results transfer 1 file 1MB with total time 60s
I don't upgrade software current from 6.3(3) to 6.3(5) via TFTP. It's error Please see attach file.
I am trying to connect a Control network that can not have access to the Internet, or any other network for that matter, to my Admin network so that I can retrieve trend data about the plant that goes into a database. Right now the process is print information, hand jam into excel spreadsheet, print again, and hand jam into another excel spreadsheet on the other network. Reports are printed automatically once a day, but would like a simplified way of getting data from one network to the other without having to re-enter data several times. Current policies stipulate no USB drives connected to Control systems. Even if we could loosen that, personnel needed to transfer data is not available and going to each individual machine would take more time than current system.Now that background is laid, I have two 2911 ISR routers with EIGRP configured, each with a 4 port EHWIC card. The 3 L3 ports on the router are setup as follows: interface G0/1 to the internet, interface G0/2 to a wireless back haul, and interface G0/0 for IT network. I then have 3 VLANs setup on the EHWICs for our Admin network. We will move the IT network to a VLAN on the remaining EHWIC port and connect the two 2911's through the G0/0 interface. I am going to have one computer on my Administration network dedicated to receiving the information and have a program that will take that data and import it to a database. I need to allow only that computer to receive traffic from the Control network and I need no traffic to flow back into the Control network. In other words I will transmit data from the control network to the admin computer using one protocol (TFTP more than likely) and block any other traffic coming out of and going into the Control network.
View 1 Replies View Relatedwe have ASA 5510 Configured. this is regarding site-to-site VPN.
View 1 Replies View RelatedSo I have a really neat computer sitting here, 2500K, P8z68-v, samsung 830 64gb ssd, corsair vengeance 16gb, deskstar hdd, firepro v5800
I have a non-descript trendnet 56K v.92 dial up modem installed to pci slot1 on my mobo.The phone company says they can't get a quicker connection than 31.2 Kbps established to dial up users in this area.The real issue is the data transfer rate.I have seen it reach as high as 6.xx Kbps but generally hovers around 2.5 Kbps.Now it is down to 1.xx Kbps and I took the last 48 hours downloading all the updates for windows and several other updates for hard ware etc.Now I need the ATI firepro update and 114 Mb will take over 16 hours at my average speed, and some 32 hours at the new slower speed
Customer production environment is nexus 5000 use 1 G interface * 4 and config Port-channel ( LACP ) uplink to C3560 , The port channel link is 802.1q trunk , but Data transfer is low , the sh int display as follow :
Why transfer performance pool and how to fix
N-5548UP# sh int ethernet 1/30Ethernet1/30 is up Hardware: 1000/10000 Ethernet, address: 547f.ee14.ed25 (bia 547f.ee14.ed25) MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA Port mode is trunk full-duplex, 1000 Mb/s, media type is 10G Beacon is turned off Input flow-control is off, output flow-control is off Rate mode is dedicated Switchport monitor is off EtherType is 0x8100 Last link flapped 9week(s) 6day(s) Last clearing of "show interface" counters 20w2d 30 seconds input rate 152 bits/sec, 19 bytes/sec, 0 packets/sec 30 [Code]...
Hardware Software profile;
Laptop - Windows 7
Desktop - Vista Ultimate SP2
Router - Cisco Linksys E3200
Cables - CAT6
I am a sales engineer, so I use my desktop and laptop all the time. When on road, I sync my desktop with my laptop using a program called ViceVersa. This a very good, reliable syncing program that I have been using for over 10 years ( with upgrades ).
The program allows me to sync my desktop and laptop. The program also shows the data transfer rate during the syncing process. The typical data transfer speed is between 5MB/s and 10MB/s with sometimes up to 12MB/s. A typical sync between the computers will take about 3 - 5 minutes at the ~ 10 MB/s transfer rate using ethernet CAT6 cable inteface. At about 11pm last Tuesday,there was a Windows update on both my Vist and Win7 computers. On wednesday, I went to do a typical sync. The system has dramatically slowed to 59KB/s max. This is about 150 times slower than 5-10MB/s that I was used to for so many years. My typical sync was now taking about 2 hours....unacceptable ! I have tried everything to figure out what is going on and how to fix it but nothing has worked.
Then I tried to see what would happen if I disconnected my ethernet cable ( between the router and the laptop only ) and just sync using the wireless network. With that configuration, the transfer rate is ~ 2.5 MB/s which is not great but is much, much better than 59KB/s. I actually do not know what a reasonable wireless transfer rate should be since I never really did it before due to the faster speed of the wired configuration.
This is just a LAN. Only connecting my Desktop to my Laptop via the Cisco router.
How I can get my wired configuration back up to the 5-10MB/s transfer rate that it once was?
Region : Ukraine
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.11 Build 121102 Rel.51321n
ISP : Volia
Is it possible to extend the functionality of USB in future firmware for data transfer? More detail about the problem [URL]can at least in beta partially implemented increase data transfer USB?I bought this router, and as all users lose .... With the Internet, download files faster than with external screw via USB.
I got a new computer and I connected it with wire to my router.The router is connected to a modem. 2 other computers are connected on this router wireless .My new computer doesn't recognize the router/modem. I tried to connect thru broadband (I don't know what is means) but it seems to be not working because I put the right username and password and I get an error from the modem number.I also tried PPPOE which I also doesn't know what it means doesnt work.How do I connect to the internet!?#@!?
View 4 Replies View RelatedI can't connect to modem after reinstalling windows xp. i have tried resetting the modem, typing in 192.168.1.1, 192.168.1.264, homeportal, gateway.2wire.net, etc. but can't reach modem.
View 1 Replies View RelatedI am trying to connect two wireless routers together so I can use the wireless n on one and have g on the other to allow smart phones to connect to it.I have cable internet and it is connected to my wireless n router (Linksys WRT320n) and I would like to connect another wireless router (Netgear WPN824) to it by a wire.So far I have connected the two routers by a cable from the linksys into the wan port on the netgear. I have assigned the netgear router a ip address 192.168.2.1, which is different from the linksys 192.168.1.1 I have also turned off DHCP on the netgear.The wireless network from the linksys is called NETWORK1 and the wireless network on the netgear is called NETWORK2 When I connect to the netgear using a cable the internet works. However I cannot get an internet connection through the netgear's wireless network.
View 1 Replies View RelatedI have a seagate black armour Nas hard drive that I am trying to hook up through a 2wire modem/router. The router isnt upnp compatible, I was wondering if there is someway I can make this nas hard drive work with this router some how even though hard drive is upnp?
View 3 Replies View Relatedi have an existing wifi capable router CDR King LP-8186 originally we use this to network 3 computers (1 Laptop and 2 Desktop) we use wired network and we have no problem until i purchased the Wireless Broadband (USB Dongle) in which i am using to connect to theinternet.The Wireless Broadband is having a DNS error if i am wired to LP-8186 and i can't browse the internet but if i unplug the wire it can connect.I Just want to use the Wireless Broadband (USB Dongle) to have an internet connection while am also wired to CDR King LP-8186 router (without buying new router that can accomodate both)
View 6 Replies View RelatedI just got an used Pc from auction today.I installed it with Xp Pro. I am trying to connect it to my wire modem but it doesn't work.
View 4 Replies View RelatedI have a Toshiba 650 laptop it was Windows 7, the hard drive broke so I bought a new hard drive and fitted into the laptop and installed windows vista ultimate now I can't get on-line it won't connect by cable from the router or wireless I put my CD in from BT to connect and it failed to load the internet what do I need to do?
View 11 Replies View RelatedSomeone I know has a Linksys WRT54GX V.2 (no WDS capability at all to my knowledge) and a Netgear N300 WNR 2000 V3 (with the repeater option). He wants to connect one to the internet in a home. The other would go out to his shop and he would like to get the internet out there too. He would also like to access the internet wirelessly with a laptop at either end. He has a wireless laptop setup and it works. The shop is line of sight with the home with no obstacles. A wire will not be able to connect one wireless router with the other due to terrain features. His laptop can get the internet from the Linksys (the Linksys is set up in the home) while he is in part of the shop, and he is trying to increase the range so that he can move to another part of the shop.
View 1 Replies View RelatedRegion : US
Model : TL-MR3040
Hardware Version : V1.0
Firmware Version : 3.12.11 build 120328 ref. 63398
i just got a new TP Link TL-MR3040 V1.0.While setting up the router page on wireless and saw the firmware is an old version 3.12.11 build 120328 ref. 63398.Did a check on the TP link site and there is a new firmware update TL-MR3040_V1_120822.I have downloaded the new firmware but dont know how to do it. Read the confusing "how to guide ......" but was stated "Do NOT upgrade the firmware via wireless connection"
Question : how to connect with LAN wire ? Try plugging btw the computer LAN and the router LAN.... can't access the 192.168.0.1
Question : any proper step-by-step guide on how to update the firmware?