Connect Two Wireless Routers Using A Wire?
Apr 19, 2011
I am trying to connect two wireless routers together so I can use the wireless n on one and have g on the other to allow smart phones to connect to it.I have cable internet and it is connected to my wireless n router (Linksys WRT320n) and I would like to connect another wireless router (Netgear WPN824) to it by a wire.So far I have connected the two routers by a cable from the linksys into the wan port on the netgear. I have assigned the netgear router a ip address 192.168.2.1, which is different from the linksys 192.168.1.1 I have also turned off DHCP on the netgear.The wireless network from the linksys is called NETWORK1 and the wireless network on the netgear is called NETWORK2 When I connect to the netgear using a cable the internet works. However I cannot get an internet connection through the netgear's wireless network.
View 1 Replies
ADVERTISEMENT
Nov 4, 2012
I have a Toshiba 650 laptop it was Windows 7, the hard drive broke so I bought a new hard drive and fitted into the laptop and installed windows vista ultimate now I can't get on-line it won't connect by cable from the router or wireless I put my CD in from BT to connect and it failed to load the internet what do I need to do?
View 11 Replies
View Related
Nov 10, 2011
So I have this E1500 Router that worked fine for the past 5 months, then out of the blue, the wireless feature ceased to function... laptops were not being able to connect to the wireless, the router was also not broadcasting the SSID.So, here's what I have done so far:
1. Check the router software settings, all was good there.
2. Did a "hardware reset" pushing the red button. (now this solved the problem, BUT only for a day, when power is turned off for the night, the next day it's non-functional again. The cycle can be repeated daily, but its a pain to reset and set it up everyday)
3. Updated the Firmware, and this somehow solved the problem for 3 Days... and now it's back to non-functional, again out of the Blue.
Is the Router just busted and it's not remembering the settings?
View 2 Replies
View Related
Jun 5, 2012
I got a new computer and I connected it with wire to my router.The router is connected to a modem. 2 other computers are connected on this router wireless .My new computer doesn't recognize the router/modem. I tried to connect thru broadband (I don't know what is means) but it seems to be not working because I put the right username and password and I get an error from the modem number.I also tried PPPOE which I also doesn't know what it means doesnt work.How do I connect to the internet!?#@!?
View 4 Replies
View Related
Feb 17, 2012
I can't connect to modem after reinstalling windows xp. i have tried resetting the modem, typing in 192.168.1.1, 192.168.1.264, homeportal, gateway.2wire.net, etc. but can't reach modem.
View 1 Replies
View Related
Jun 21, 2011
I have a seagate black armour Nas hard drive that I am trying to hook up through a 2wire modem/router. The router isnt upnp compatible, I was wondering if there is someway I can make this nas hard drive work with this router some how even though hard drive is upnp?
View 3 Replies
View Related
Feb 22, 2013
I have a laptop and a pc...i want to transfer loads of data (about 100 gb) from the laptop to the desktop.I have NO means to do it wirelessly.how to accomplish this so seemingly cumbersome task via wires? (i read in some other places about connecting it via lan wire and then changing the ip addresses.where on my desktop will i see the data of my laptop?
View 5 Replies
View Related
Jun 19, 2011
i have an existing wifi capable router CDR King LP-8186 originally we use this to network 3 computers (1 Laptop and 2 Desktop) we use wired network and we have no problem until i purchased the Wireless Broadband (USB Dongle) in which i am using to connect to theinternet.The Wireless Broadband is having a DNS error if i am wired to LP-8186 and i can't browse the internet but if i unplug the wire it can connect.I Just want to use the Wireless Broadband (USB Dongle) to have an internet connection while am also wired to CDR King LP-8186 router (without buying new router that can accomodate both)
View 6 Replies
View Related
Oct 29, 2012
I just got an used Pc from auction today.I installed it with Xp Pro. I am trying to connect it to my wire modem but it doesn't work.
View 4 Replies
View Related
Jul 15, 2012
Someone I know has a Linksys WRT54GX V.2 (no WDS capability at all to my knowledge) and a Netgear N300 WNR 2000 V3 (with the repeater option). He wants to connect one to the internet in a home. The other would go out to his shop and he would like to get the internet out there too. He would also like to access the internet wirelessly with a laptop at either end. He has a wireless laptop setup and it works. The shop is line of sight with the home with no obstacles. A wire will not be able to connect one wireless router with the other due to terrain features. His laptop can get the internet from the Linksys (the Linksys is set up in the home) while he is in part of the shop, and he is trying to increase the range so that he can move to another part of the shop.
View 1 Replies
View Related
Mar 8, 2013
Region : US
Model : TL-MR3040
Hardware Version : V1.0
Firmware Version : 3.12.11 build 120328 ref. 63398
i just got a new TP Link TL-MR3040 V1.0.While setting up the router page on wireless and saw the firmware is an old version 3.12.11 build 120328 ref. 63398.Did a check on the TP link site and there is a new firmware update TL-MR3040_V1_120822.I have downloaded the new firmware but dont know how to do it. Read the confusing "how to guide ......" but was stated "Do NOT upgrade the firmware via wireless connection"
Question : how to connect with LAN wire ? Try plugging btw the computer LAN and the router LAN.... can't access the 192.168.0.1
Question : any proper step-by-step guide on how to update the firmware?
View 1 Replies
View Related
Jan 8, 2013
I would like configure two router (e.g. 1921) back to back via a 2 pin copper wire. Can I use HWIC-4SHDSL-E card to do it? What is the configuration I can use?
View 7 Replies
View Related
Feb 15, 2011
I have a windows 7 laptop and when I connect it the a wired connection it disables the wireless & 3G connections, but when I unplug the cable it doesn't renable the connections, I have to go into the network connections and select each one and renable it again.
View 6 Replies
View Related
May 16, 2011
my printer connect wit desktop,pc is connect to router for net.. is it possible to take print out through laptop without conect any wire connection to printer???
View 1 Replies
View Related
Feb 13, 2011
I have a curent cable connection that is fine connecting two computers through a router and it is wired. I have a new Iphone and some programs "documents to go" for example won't sync to my computer thru USB cord it wants a WiFi connection. Can I have both a WiFi and wired conection on same cable connection? I'm asuming if I get just a WiFi router, I will also have to get new nic cards for desktops, when all I really want is something for the Iphone to WiFI thru
View 1 Replies
View Related
Jun 24, 2011
I just installed windows 7 into my computer and I need to verify my copy of windows. I tried connect my Ethernet wire from my computer to the wireless router but it's not connecting or registering. The wireless router is a WRT54G and I can access the device ip for it but I don't know how to assign an IP address for the new computer. I already had a computer (wired) and a laptop (wireless) connected to the router. I'm using a straight trough Ethernet wire Doing the steps in the sticied post below didn't work because typing ipconfig /release didn't work?
View 5 Replies
View Related
Nov 29, 2012
I have DIR-601 wireless router with two computers connected: Server (192.168.1.2) and Client (192.168.1.3 on Ethernet Port and 192.168.1.4 on Wireless)
I also use dlinkddns.com and my router's public IP is mapped as abc.dlinkddns.com.
In the router Virtual Server section, it is configured as:
Public Port: 3389 (for Remote Desktop)
Private Port: 3389
IP Address: 192.168.1.2 (server's IP)
I am expecting this to allow the client to access the server via windows Remote Desktop.
The current situation is:
- When wireless is on, the client can access the server's Remote Desktop
- When wireless is off and client is connected by wired Ethernet, the client cannot connect to the server's remote desktop. After timeout, the error msg is "Remote Desktop can't connect to the remote computer for one of these reasons: ...".
- When the client is in another network, it can connect to the server through the Internet.
I am sure it's not the client's problem because it can access via wireless or remotely from another network. It's not the router's virtual server config problem for the same reasons. Will it be a bug in the router? (hardware version: B1, firmware version: 2.00NA).
View 1 Replies
View Related
May 1, 2011
I wired it all up correctly, and Continue to get "error 322: check router" upon every attempted install. I did some research and tried releasing and renewing IP amongst restarting all networking devices AND PC's. Peculiar enough, I could connect AND get online wirelessly from a netbook, but neither of my 2 PC's could connect via a wire. I got a defective router, is it possible the ports are malfunctioning? because the lights are on, but 3 or all of the 4 lights are continually on when only 2 ports are plugged in
View 5 Replies
View Related
Oct 17, 2010
Is it possible to get a WAP54G wireless access point working with a WRT120N wireless router, by wiring the 2 devices together?
View 6 Replies
View Related
Jul 26, 2011
Just purchased WRT54GL for family friend to extend the wireless range of their DSL via 2Wire ATT modem Wireless router. One desktop computer will stay wired to the 2Wire and laptop or 2 will connect to the WRT54GL since the 2Wire cannot reach into the yard (metal buiding). I've seen several examples of connecting two WRT54G together. I Can I do that well with std Linksys software or would I be better off downloading Tomato or DD-WRT third party?
View 1 Replies
View Related
Jul 25, 2011
I have a wireless lan controller (5508) broadcasting 2 SSID's, once is a secure vlan grabbing an ip address from a local dhcp server and getting access to the internal network, and the other ssid is for a guest vlan where the dhcp server is in a remote site and internet access is off a circuit in our data center which is accessed over a wan. The secure ssid's vlan is defined on the local switch, but the guest vlan is not defined on the local switch.the ap's in the respective sites are trunked to the core switch and the switchport config is : [code] it's trunked b/c we have both vlans going across this physical connection.I would like get the guest vlan a wired connection, ie. off a switchhub, but not sure how to do that as this guest vlan is not defined on our local network.
View 1 Replies
View Related
May 17, 2013
So I dug my old Latitude D630 out from the attic, turned it on, and it still works, and it actually connected to my router! However, only the wireless connects, not the wired connection. When I plug an ethernet cable in, the computer does not recognize the cable, and tells me a cable is unplugged...which of course it isn't.
View 5 Replies
View Related
Sep 2, 2011
The router works fine until I plug the 4th wire in the back, which goes to a 2nd desktop computer, then it is only a matter of time until the router drops all internet connections including the direct wire to desktop #1, wireless, and the other two wires.This is my 2nd e2000 router since Amazon replaced the first one after about 4 months as it was having the same problem.
View 5 Replies
View Related
Sep 5, 2012
Today I replaced my motherboard to fix the graphics card issue on my Vostro 1400. After installing the motherboard I installed the driver's from Dell's site for the networking card.
I get an error stating device driver/software was not successfully installed. I tried a restore point, that didn't work either. I tried the original driver disc that came with the laptop - same problem.
In device manager it is showing: broadcom netlink adapter fast ethernet #2 - does that mean it thinks I have more than one network card? I'm not sure what to do next. I can't access any wireless from that laptop, not even from a hard wire.
I'm running Windows 7 32 bit.
View 8 Replies
View Related
Oct 23, 2012
I purchased Linksys (Cisco) EA2700. For the moment it is being used as an access point for a wireless network (WLAN) and an Ethernet switch. 4 laptops are being connected to it through the wireless network, the wire connects one computer and a separate ADSL modem (it is used for accessing Internet). As a result minimal ping to any of the devices in wireless network is 8 ms – the best result and sometimes rises to 20 ms. Consequently when working with local network resources one suffers from speed decrease. Ping to the access point through the wire varies from 1 to 8 ms. These delays are quite strange as even on cheaper routers ping does not rise above 2 ms (usually <1ms). Is it normal for the device?
View 9 Replies
View Related
Feb 5, 2013
I am recieving error 619 (port for connection was closed) when trying to connect over my wireless connection. If I disconnect the WRT54G and hard wire to the cable modem I can VPN in without a problem. I have enabled IPSec / PPTP / L2TP on the VPN security tab and have reset the wireless modem.
View 4 Replies
View Related
Jan 21, 2013
I am trying to connect 2 wireless routers to expand my wireless signal. I want to connect the router 1 (in 2d floor) to a powerline av and then get the router 2 to the powerline (in the ground floor) so i can have wireless there too. I've tried some configurations i found online, but can't get to make the network functioning. The routers and powerline av are all dlink. I don't mind having 2 networks, but it would be better to have only one
View 4 Replies
View Related
Sep 19, 2011
I want to connect two routers wirelessly without running cables , any easiest way without cables.
View 1 Replies
View Related
Sep 3, 2012
My parents took the modem from the inside of my room to use it on their WEAK computer in their room that they RARELY USE. And even though i can give them a wireless usb they say they wan't it in THEIR ROOM. so ofcourse it pissed me off that my 8 core 8 gig rig would have to resort to wireless but whatever. We have a 2wire740 box from at&t. This one to be exact. url...My question is can i use the Clear modem and plug it into the 2wire740 so that it can broadcast for me to be able to still get internet ?
View 2 Replies
View Related
Feb 10, 2012
Can I replace my AT&T 2 Wire with any DSL Modem? We get terrible wireless response in rooms not close to the modem, I don't care what the additional cost is, I just want to use my laptop throughout the house, including my basement.
View 4 Replies
View Related
May 28, 2012
My home is about 20 years old. I want to pull out all the old phone wiring and replace it with CAT-5 cabling. I have several questions.
1) Is it likely the phone cable is loose in the walls, or is it typically tied down inside the walls? Therefore, can I use the phone cable to pull the CAT-5 (unterminated)?
2) I heard that fire code construction demands that holes in the wall joists be filled - is that true?
3) Any least invasive way to get CAT-5 around my home? I can pull to only a select few spots if it's very difficult.
View 2 Replies
View Related
Mar 22, 2011
i want to know what is the type of wire used for a dsl connection
View 1 Replies
View Related
Jun 28, 2012
i was using one internet wire to pc as well as laptop but not at same time . whenever i need i used to remove it from PC n then connect it to laptop. but now i can get connect to PC but whenver i try to connect it to laptop it only redials . i have dial up connection n all things are correct , username password . what can i do now ? i heard something about copying physical address to laptop.
View 2 Replies
View Related
