I have a seagate black armour Nas hard drive that I am trying to hook up through a 2wire modem/router. The router isnt upnp compatible, I was wondering if there is someway I can make this nas hard drive work with this router some how even though hard drive is upnp?
View 3 Replies
I got a new computer and I connected it with wire to my router.The router is connected to a modem. 2 other computers are connected on this router wireless .My new computer doesn't recognize the router/modem. I tried to connect thru broadband (I don't know what is means) but it seems to be not working because I put the right username and password and I get an error from the modem number.I also tried PPPOE which I also doesn't know what it means doesnt work.How do I connect to the internet!?#@!?
View 4 Replies View RelatedRegion : US
Model : TL-MR3040
Hardware Version : V1.0
Firmware Version : 3.12.11 build 120328 ref. 63398
i just got a new TP Link TL-MR3040 V1.0.While setting up the router page on wireless and saw the firmware is an old version 3.12.11 build 120328 ref. 63398.Did a check on the TP link site and there is a new firmware update TL-MR3040_V1_120822.I have downloaded the new firmware but dont know how to do it. Read the confusing "how to guide ......" but was stated "Do NOT upgrade the firmware via wireless connection"
Question : how to connect with LAN wire ? Try plugging btw the computer LAN and the router LAN.... can't access the 192.168.0.1
Question : any proper step-by-step guide on how to update the firmware?
So I have this E1500 Router that worked fine for the past 5 months, then out of the blue, the wireless feature ceased to function... laptops were not being able to connect to the wireless, the router was also not broadcasting the SSID.So, here's what I have done so far:
1. Check the router software settings, all was good there.
2. Did a "hardware reset" pushing the red button. (now this solved the problem, BUT only for a day, when power is turned off for the night, the next day it's non-functional again. The cycle can be repeated daily, but its a pain to reset and set it up everyday)
3. Updated the Firmware, and this somehow solved the problem for 3 Days... and now it's back to non-functional, again out of the Blue.
Is the Router just busted and it's not remembering the settings?
I would like configure two router (e.g. 1921) back to back via a 2 pin copper wire. Can I use HWIC-4SHDSL-E card to do it? What is the configuration I can use?
View 7 Replies View RelatedI can't connect to modem after reinstalling windows xp. i have tried resetting the modem, typing in 192.168.1.1, 192.168.1.264, homeportal, gateway.2wire.net, etc. but can't reach modem.
View 1 Replies View RelatedI am trying to connect two wireless routers together so I can use the wireless n on one and have g on the other to allow smart phones to connect to it.I have cable internet and it is connected to my wireless n router (Linksys WRT320n) and I would like to connect another wireless router (Netgear WPN824) to it by a wire.So far I have connected the two routers by a cable from the linksys into the wan port on the netgear. I have assigned the netgear router a ip address 192.168.2.1, which is different from the linksys 192.168.1.1 I have also turned off DHCP on the netgear.The wireless network from the linksys is called NETWORK1 and the wireless network on the netgear is called NETWORK2 When I connect to the netgear using a cable the internet works. However I cannot get an internet connection through the netgear's wireless network.
View 1 Replies View RelatedI have a laptop and a pc...i want to transfer loads of data (about 100 gb) from the laptop to the desktop.I have NO means to do it wirelessly.how to accomplish this so seemingly cumbersome task via wires? (i read in some other places about connecting it via lan wire and then changing the ip addresses.where on my desktop will i see the data of my laptop?
View 5 Replies View RelatedI would like to connect a hard drive that has USB enclosure to an wireless N dlink extreem router so that I can access files wirelessly on my laptop. I installed SharePort utility on my pc and it is showing drive in the utility connected but can not see it in explore like the way I see when drive is connected directly to LAPTOP using USB port. I also tried to map the drive but nothing works.anything on WIN 7 side ? I tried the same with a USB jump drive but same thing.
View 3 Replies View Relatedi have an existing wifi capable router CDR King LP-8186 originally we use this to network 3 computers (1 Laptop and 2 Desktop) we use wired network and we have no problem until i purchased the Wireless Broadband (USB Dongle) in which i am using to connect to theinternet.The Wireless Broadband is having a DNS error if i am wired to LP-8186 and i can't browse the internet but if i unplug the wire it can connect.I Just want to use the Wireless Broadband (USB Dongle) to have an internet connection while am also wired to CDR King LP-8186 router (without buying new router that can accomodate both)
View 6 Replies View RelatedI just got an used Pc from auction today.I installed it with Xp Pro. I am trying to connect it to my wire modem but it doesn't work.
View 4 Replies View RelatedI have a WD, 1TB, external harddrive with a USB connection and would like to know if it is possible to get a USB hub with an ethernet connector to connect into the back of my router. Is it possible to do this? If so, what will I need to do? Will I need to give the external drive a static IP address, then partition it?
View 1 Replies View RelatedI have a Toshiba 650 laptop it was Windows 7, the hard drive broke so I bought a new hard drive and fitted into the laptop and installed windows vista ultimate now I can't get on-line it won't connect by cable from the router or wireless I put my CD in from BT to connect and it failed to load the internet what do I need to do?
View 11 Replies View RelatedMy desktop internet was working fine earlier today. I bought a new hard drive and installed it without any trouble. I plugged my machine back in and received a "no internet connection" message. I have tried (what I think is) everything: unplugged my modem and router and plugged it back in as if it was the first time with the 60 second pauses and whatnot; tested the connection with my cable modem service provider; unplugged and checked cable connections; did ipconfig/flushdns ... I'm really not sure where to go from here.My wireless configuration works fine, as I am able to connect both wirelessly and wired to the router on my laptop. I cannot connect via the modem or router to my desktop PC.Windows 7 running 64-bit, Motorola Surfboard modem (brand new), Medialink router (also brand new), custom built machine.
View 1 Replies View Relatedcan i connect the ea3500 to 4 bay enclosure: [URL] it is connected through only 1 usb cale inside the enclosure i have 4 2TB western digital drives?
will i be able to see the 4 drives on my network?
Someone I know has a Linksys WRT54GX V.2 (no WDS capability at all to my knowledge) and a Netgear N300 WNR 2000 V3 (with the repeater option). He wants to connect one to the internet in a home. The other would go out to his shop and he would like to get the internet out there too. He would also like to access the internet wirelessly with a laptop at either end. He has a wireless laptop setup and it works. The shop is line of sight with the home with no obstacles. A wire will not be able to connect one wireless router with the other due to terrain features. His laptop can get the internet from the Linksys (the Linksys is set up in the home) while he is in part of the shop, and he is trying to increase the range so that he can move to another part of the shop.
View 1 Replies View RelatedOur previous wireless router (Netgear Rangemax wpn802) died yesterday so I went out and bought a Western Digital My Net N900. The issue is that now anyone using the wireless signal can't connect to a shared network folder that they were previously able to connect to using the old router.
I'm not able to log into the old router to see any of its settings. I do have access to the server that has the shared folder - I just don't have any idea what needs to be set in order for the N900 to allow me through to the shared folder - whether it's on the router side or the server side.
[code]...
Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?
View 3 Replies View RelatedI was wondering if the EA3500 would support splitting the USB (buying a USB tree) to allow for both a printer and hard drive to connect at the same time?
View 1 Replies View Relatedset up Dynamic DNS on 2 wire router 2701HGV-E
View 2 Replies View Relatedi am a gamer and i rely on the internet to do some buisiness as well, a few months ago my router started randomly dropping me from my connection and then 10 seconds later the connection is back up. now i know alot about computers and cant figure out why this is happening. it seems that the problem starts with skype. when i play some games while in skype(we use it as a communication device for the games) i will get dropped from skype and from my game, then skype reconects and i can reconect to the game but 5 minutes later it happens again. i have at&t and am using a 2701HG-B, my donwload speed is a max of 3mbps and usualy is around 2.7mbps. i have contacted at&t multiple times, i have reset my router multiple times but it hasnt fixed the problem. at&t stated that i am demanding too much bandwith from my connection. i feel that this info totally crap. when im on with just 1 of my many devices at 3am and all i am doing is playing a game and talking on skype and it disconnects, there is no way i am demanding too much.
View 4 Replies View RelatedMy housemates have been having a trouble with network coverage in my house, the router is located in the basement of my house, perfect for me as my room is also down there (Ethernet). Unfortunately my housemate in the attic room's signal seems to be a problem. I'm wondering if it would be possible to remove one of my routers two antennas solder some copper wire to the spot it was removed, then have the wire go up to the 1st floor and re-solder the antenna up there (mount it on the wall or something). I'm confident with the practicalities of actually doing this, but I'm not that techie when it comes to electronics. I'm not sure whether it would need more power to boost it over such a distance.
View 3 Replies View RelatedFind my security key on 2 wire router
View 2 Replies View RelatedI am trying to hook my bluray player up wirelessy I have a 2 wire modem I also bought a wireless router and a wlan to hook to the back of the bluray is this right
View 1 Replies View RelatedI've had a 2Wire gateway that I got from AT&T for about 5 years. Although I've seen terrible reviews for 2Wire, I've had pretty good luck with this one. Now the Power light is a steady red and only light on. Tech support says that it's most likely the power adapter.As I understand, most what are called modems or routers today are a combination of these two, is that right? I see them in stores ranging from $30 to $200 or more, and they all say they do the same thing - almost identical wording. If it turns out that my adapter is good, what should I be looking for?
View 2 Replies View Relatedwhen connecting my router to my tv are the wire colors thru or crossed
View 2 Replies View RelatedI have a router setup that worked for me for months, suddenly, it stopped detecting the wire connected from the POE adapter.When the wire is directly connected to my pc, the connection works and i have internet. But when thru the router, the WAN Light is not even lit.Btw, just for checking purposes, I tried connecting a wire from my pc to the router wan port, and the WAN light lits up.
View 1 Replies View RelatedI just installed windows 7 into my computer and I need to verify my copy of windows. I tried connect my Ethernet wire from my computer to the wireless router but it's not connecting or registering. The wireless router is a WRT54G and I can access the device ip for it but I don't know how to assign an IP address for the new computer. I already had a computer (wired) and a laptop (wireless) connected to the router. I'm using a straight trough Ethernet wire Doing the steps in the sticied post below didn't work because typing ipconfig /release didn't work?
View 5 Replies View RelatedMy WLSE 1030 hard drive failed and I have replaced it with a new drive but when I boot from the 2.15 recovery CD the disc boots and runs, within the console connection I get the error "ERROR: version information not found in flash" the disc is the ejected and the system reboots.How can I reload the system software.
View 3 Replies View RelatedI wired it all up correctly, and Continue to get "error 322: check router" upon every attempted install. I did some research and tried releasing and renewing IP amongst restarting all networking devices AND PC's. Peculiar enough, I could connect AND get online wirelessly from a netbook, but neither of my 2 PC's could connect via a wire. I got a defective router, is it possible the ports are malfunctioning? because the lights are on, but 3 or all of the 4 lights are continually on when only 2 ports are plugged in
View 5 Replies View RelatedIs it possible to get a WAP54G wireless access point working with a WRT120N wireless router, by wiring the 2 devices together?
View 6 Replies View RelatedJust purchased WRT54GL for family friend to extend the wireless range of their DSL via 2Wire ATT modem Wireless router. One desktop computer will stay wired to the 2Wire and laptop or 2 will connect to the WRT54GL since the 2Wire cannot reach into the yard (metal buiding). I've seen several examples of connecting two WRT54G together. I Can I do that well with std Linksys software or would I be better off downloading Tomato or DD-WRT third party?
View 1 Replies View RelatedIm new to cisco routes, Im traing to configure a 1711 routes with a dsl 2wire routes, my problem is that Im able to ping anywhere in the routes, but when Im on my computer I can only ping the interfaces on the router but no the 2wire route that gives me access to the internet.
View 2 Replies View Related
