Modem / Router Weird Views For 2 Wire
May 11, 2011
I've had a 2Wire gateway that I got from AT&T for about 5 years. Although I've seen terrible reviews for 2Wire, I've had pretty good luck with this one. Now the Power light is a steady red and only light on. Tech support says that it's most likely the power adapter.As I understand, most what are called modems or routers today are a combination of these two, is that right? I see them in stores ranging from $30 to $200 or more, and they all say they do the same thing - almost identical wording. If it turns out that my adapter is good, what should I be looking for?
View 2 Replies
ADVERTISEMENT
Oct 2, 2011
I am trying to hook my bluray player up wirelessy I have a 2 wire modem I also bought a wireless router and a wlan to hook to the back of the bluray is this right
View 1 Replies
View Related
Mar 14, 2012
I've recently bought a wag320n modem router to replace the two wire device fitted to my bt business broadband. This router supports a guest network..
View 1 Replies
View Related
Feb 5, 2013
I am recieving error 619 (port for connection was closed) when trying to connect over my wireless connection. If I disconnect the WRT54G and hard wire to the cable modem I can VPN in without a problem. I have enabled IPSec / PPTP / L2TP on the VPN security tab and have reset the wireless modem.
View 4 Replies
View Related
Feb 17, 2012
I can't connect to modem after reinstalling windows xp. i have tried resetting the modem, typing in 192.168.1.1, 192.168.1.264, homeportal, gateway.2wire.net, etc. but can't reach modem.
View 1 Replies
View Related
Jul 13, 2011
I am trying to establish a home network for an HP laptop running Windows 7 wirelessly to a 2wire modem for file sharing with my Vista PC. My laptop recognizes the 2wire network but Vista won't.Do I need to download drivers or adjust any firewall settings?
View 11 Replies
View Related
Oct 29, 2012
I just got an used Pc from auction today.I installed it with Xp Pro. I am trying to connect it to my wire modem but it doesn't work.
View 4 Replies
View Related
Feb 12, 2012
Our DDM admin would like to pull device information from LMS. I've enabled DB Views (ODBC) access and tested from my desktop that I can query the data successfully. The DDM admin is telling me DDM requires access to several master tables - sysservers, sysdatabases, syslogins, etc..before he can query the RME/ANI device data. Does these master system tables are available, exposed or even exist in LMS? I can't find them.
View 1 Replies
View Related
May 3, 2011
Is there any way to link the Role-based CLI views created in the AAA client to the user created in the ACS 5.2 server? I know that you could do that in ACS 4.2 by using the “cli-view-name” attribute.What I have in mind is to login with some user and that the ACS 5.2 server links this user with a view previously created in the AAA client:This is what I would like to achieve:view configured in the AAA client:parser view DiData secret 5 $1$jPNA$gr9o8gGNmWh9sk8Axbfx91 commands exec include copy running-config ftp commands exec include copy running-config commands exec include copy startup-config ftp commands exec include copy startup-config commands exec include copy commands exec include all show Login to the device using a user created on ACS 5.2 and linked to the above DiData view:
telnet xx.xx.xx.xx
username: cenetacspassword:
Router#?Exec commands: <1-99> Session number to resume copy Copy from one file to another enable Turn on privileged commands exit Exit from the EXEC show Show running system information
Router#
Typing the command "enable view something" is not an option for us.
View 1 Replies
View Related
Nov 21, 2012
We were hit by hurricane Sandy a couple weeks ago and lost power for a week and a half. Now that our cable has been restored I noticed that the wireless internet wasn't working. The wired internet works fine to this computer but no Wi-fi.I think the problem is the routers default gateway. It's supposed to be 192.168.1.1 but right now it's 24.191.112.1 .So far I have tried:
-Powercycling everything
-ipconfig/ flush DNS
-ipconfig/ release and ipconfig/renew
-Checking all the wires are pugged in fine (They are).
View 1 Replies
View Related
Nov 24, 2011
I am directly plugged into the router on my computer, and it is used wireless for the rest of the computers in the house. Frequently (3-4 times a day usually, sometimes more like every 20 mins, other days not at all), the router and Network Magic will tell me my computer has lost internet connection, and browsers and any program I try to start won't be able to connect to the internet. However, I know the connection is still live because any program that was running and accessing the internet beforehand (multi player games and instant messaging programs, for example) still run fine with their connection and I can continue to play or chat online until I close that program.
Trying the 'Repair Connection' on network magic doesn't work, but unplugging and replugging the power cable to the router fixes the issue(again, so I know it's the router and not the internet)whatever reason the router is deciding to tell me it's not active and refuse access to the internet for new programs when existing connections don't show any problems.
View 3 Replies
View Related
Jul 25, 2012
I just got an e4200 refurbed router, and it's been working great except for one problem I'm having. I have Comcast cable with Ubee D3.0 modem. For some reason, there will be a random 4-8 second delay when going to certain websites. While this normally wouldn't be a problem, it occurs quite frequently with Google.com and we definitely can't have that. I've updated to latest firmware. Ran ping test to find optimal MTU, went with 1500. To be sure it isn't a DNS issue, tried accessing Google by IP addy and getting the same delay. The delay seems to occasionally occur with Facebook as well, at one point I couldn't even get to Facebook and had to release/renew ipconfig. I have Mac address cloned if that makes a difference.
View 4 Replies
View Related
Feb 24, 2011
networking error which seems to make no sense to me, i have computer 1 (tower computer) computer 2 (laptop computer 3 (tower computer1 & 2 have networked happily together for 4-5 years, sharing files and printers both ways. 3 was connected and happily joined the network but only with 2. 1 can see files on both 2 & 3, have now disconnected 3, have reset and rebooted router and both computers are up to date with software patches, i can not work out why 2 (or 3 before it was disconnected) can see 1 on the workgroup but can not access 1 in any way. i can, however, copy a shortcut from 1 through metwork places into 2 and access those files from 2. but network wizard or manual setting can not get full sharing.
View 6 Replies
View Related
Sep 1, 2012
I have a WiFi in my home, when this laptop is under normal load, say like streaming a 360p youtube video, all the computers in my home will experience a huge lag and it becomes impossible to surf or do any internet activity (even the causing laptop itself will experience huge pings). The weird part is that the lag is at the LAN level, it is not related to my internet bandwidth. Because when I ping my local router (192.168.2.1) with other PCs during the lag period, I get 1000-4000 ms. However, it is usually 1 ms. I tried doing a stress test on one of my normal laptops by downloading at maximum speed, the problem did not occur, there was no lag, all my PCs did not encounter that lag and I still get 1 ms when pinging the router. It is only this laptop that when it starts downloading, my network will be flooded.
Another related problem with the laptop is that every time I log off then log in and try to reconnect to my network, It will not allow me, I will have to click on the windows diagnose problem and it will be fixed saying "Problem with wireless adapter or access point".
View 3 Replies
View Related
Jan 15, 2012
hen its wireless, it has no problems with the internet, everything works fine.But when its wired, webpages will still load, but youtube videos wont work, anything that consists of streaming doesn't work, and he cant even useI have connected other laptops to the same cord and there is no problems. so i know its not the cord and i imagine its not the router since everything still works fine with other computers.
View 5 Replies
View Related
Jun 5, 2012
I got a new computer and I connected it with wire to my router.The router is connected to a modem. 2 other computers are connected on this router wireless .My new computer doesn't recognize the router/modem. I tried to connect thru broadband (I don't know what is means) but it seems to be not working because I put the right username and password and I get an error from the modem number.I also tried PPPOE which I also doesn't know what it means doesnt work.How do I connect to the internet!?#@!?
View 4 Replies
View Related
Dec 30, 2012
the problem is that I'm suffering from ping spikes. When I ping my router it looks something like this:
C:UsersNiklas>ping 192.168.1.1 -n 10
Skickar ping-signal till 192.168.1.1 med 32 byte data:
Svar från 192.168.1.1: byte=32 tid=991ms TTL=64
Svar från 192.168.1.1: byte=32 tid < 1 ms TTL=64
Svar från 192.168.1.1: byte=32 tid=2944ms TTL=64[code].....
View 5 Replies
View Related
Jun 21, 2012
In the last 8 month I have been upgrated at least 6 Cisco ASA 5505 from 8.2(1) to 8.4(3) without problems, I did a minor changes and all related to rules due a problem with the migration.
View 1 Replies
View Related
Mar 27, 2012
I've got a 48-port 3750 running 12.2(46)SE and I am seeing these messages in the logs. Has any seen this message before or what it means ?
Invalid packet (too large) length=22320
View 1 Replies
View Related
Jan 2, 2012
set up Dynamic DNS on 2 wire router 2701HGV-E
View 2 Replies
View Related
May 9, 2011
i am a gamer and i rely on the internet to do some buisiness as well, a few months ago my router started randomly dropping me from my connection and then 10 seconds later the connection is back up. now i know alot about computers and cant figure out why this is happening. it seems that the problem starts with skype. when i play some games while in skype(we use it as a communication device for the games) i will get dropped from skype and from my game, then skype reconects and i can reconect to the game but 5 minutes later it happens again. i have at&t and am using a 2701HG-B, my donwload speed is a max of 3mbps and usualy is around 2.7mbps. i have contacted at&t multiple times, i have reset my router multiple times but it hasnt fixed the problem. at&t stated that i am demanding too much bandwith from my connection. i feel that this info totally crap. when im on with just 1 of my many devices at 3am and all i am doing is playing a game and talking on skype and it disconnects, there is no way i am demanding too much.
View 4 Replies
View Related
Jun 21, 2011
I have a seagate black armour Nas hard drive that I am trying to hook up through a 2wire modem/router. The router isnt upnp compatible, I was wondering if there is someway I can make this nas hard drive work with this router some how even though hard drive is upnp?
View 3 Replies
View Related
Jan 31, 2012
My housemates have been having a trouble with network coverage in my house, the router is located in the basement of my house, perfect for me as my room is also down there (Ethernet). Unfortunately my housemate in the attic room's signal seems to be a problem. I'm wondering if it would be possible to remove one of my routers two antennas solder some copper wire to the spot it was removed, then have the wire go up to the 1st floor and re-solder the antenna up there (mount it on the wall or something). I'm confident with the practicalities of actually doing this, but I'm not that techie when it comes to electronics. I'm not sure whether it would need more power to boost it over such a distance.
View 3 Replies
View Related
Dec 25, 2012
Find my security key on 2 wire router
View 2 Replies
View Related
Feb 18, 2013
I have a SG500-28-K9-G5 at work and I'm tyring to connect to it trough the console port via Putty and get wierd symbols: When I press any button I see alot of wierd symbols comming up, for example if I press shift+6 or Enter (or anything). [code]
View 2 Replies
View Related
Feb 6, 2011
when connecting my router to my tv are the wire colors thru or crossed
View 2 Replies
View Related
Nov 8, 2012
I have a router setup that worked for me for months, suddenly, it stopped detecting the wire connected from the POE adapter.When the wire is directly connected to my pc, the connection works and i have internet. But when thru the router, the WAN Light is not even lit.Btw, just for checking purposes, I tried connecting a wire from my pc to the router wan port, and the WAN light lits up.
View 1 Replies
View Related
Jun 24, 2011
I just installed windows 7 into my computer and I need to verify my copy of windows. I tried connect my Ethernet wire from my computer to the wireless router but it's not connecting or registering. The wireless router is a WRT54G and I can access the device ip for it but I don't know how to assign an IP address for the new computer. I already had a computer (wired) and a laptop (wireless) connected to the router. I'm using a straight trough Ethernet wire Doing the steps in the sticied post below didn't work because typing ipconfig /release didn't work?
View 5 Replies
View Related
May 1, 2011
I wired it all up correctly, and Continue to get "error 322: check router" upon every attempted install. I did some research and tried releasing and renewing IP amongst restarting all networking devices AND PC's. Peculiar enough, I could connect AND get online wirelessly from a netbook, but neither of my 2 PC's could connect via a wire. I got a defective router, is it possible the ports are malfunctioning? because the lights are on, but 3 or all of the 4 lights are continually on when only 2 ports are plugged in
View 5 Replies
View Related
Oct 17, 2010
Is it possible to get a WAP54G wireless access point working with a WRT120N wireless router, by wiring the 2 devices together?
View 6 Replies
View Related
Jul 26, 2011
Just purchased WRT54GL for family friend to extend the wireless range of their DSL via 2Wire ATT modem Wireless router. One desktop computer will stay wired to the 2Wire and laptop or 2 will connect to the WRT54GL since the 2Wire cannot reach into the yard (metal buiding). I've seen several examples of connecting two WRT54G together. I Can I do that well with std Linksys software or would I be better off downloading Tomato or DD-WRT third party?
View 1 Replies
View Related
Mar 8, 2013
Region : US
Model : TL-MR3040
Hardware Version : V1.0
Firmware Version : 3.12.11 build 120328 ref. 63398
i just got a new TP Link TL-MR3040 V1.0.While setting up the router page on wireless and saw the firmware is an old version 3.12.11 build 120328 ref. 63398.Did a check on the TP link site and there is a new firmware update TL-MR3040_V1_120822.I have downloaded the new firmware but dont know how to do it. Read the confusing "how to guide ......" but was stated "Do NOT upgrade the firmware via wireless connection"
Question : how to connect with LAN wire ? Try plugging btw the computer LAN and the router LAN.... can't access the 192.168.0.1
Question : any proper step-by-step guide on how to update the firmware?
View 1 Replies
View Related
Dec 18, 2012
Im new to cisco routes, Im traing to configure a 1711 routes with a dsl 2wire routes, my problem is that Im able to ping anywhere in the routes, but when Im on my computer I can only ping the interfaces on the router but no the 2wire route that gives me access to the internet.
View 2 Replies
View Related
