To Connect Linksys WRT54GX V2 To Netgear N300 WNR 2000 V3 Wire
Jul 15, 2012
Someone I know has a Linksys WRT54GX V.2 (no WDS capability at all to my knowledge) and a Netgear N300 WNR 2000 V3 (with the repeater option). He wants to connect one to the internet in a home. The other would go out to his shop and he would like to get the internet out there too. He would also like to access the internet wirelessly with a laptop at either end. He has a wireless laptop setup and it works. The shop is line of sight with the home with no obstacles. A wire will not be able to connect one wireless router with the other due to terrain features. His laptop can get the internet from the Linksys (the Linksys is set up in the home) while he is in part of the shop, and he is trying to increase the range so that he can move to another part of the shop.
View 1 Replies
ADVERTISEMENT
Sep 2, 2011
The router works fine until I plug the 4th wire in the back, which goes to a 2nd desktop computer, then it is only a matter of time until the router drops all internet connections including the direct wire to desktop #1, wireless, and the other two wires.This is my 2nd e2000 router since Amazon replaced the first one after about 4 months as it was having the same problem.
View 5 Replies
View Related
Feb 26, 2012
Child at college having significant connections issues with Sony VAIO VPECB trying to connect to Netgear N300 wireless router. Upped the bandwidth - no impact. Other MACs in the house have no issue.
View 1 Replies
View Related
Jan 29, 2011
I just bought a new Netgear N300 router to go along with the Mediacom cable internet I just signed up for. I can plug the ethernet cable straight from the modem into my computer and get internet. Unfortunately this only works after I run the windows diagnostic to correct the errors that wont allow me internet access (unable to connect to IP address, lack of DNS server) but eventually I get access. The instruction then tell me to run the ethernet from the modem to the router and then another cable to my computer from the router. When I do this, I lose all internet access. I thought I just had to instal the router using the provided disk but it never gets past the internet connection test.I have tried to provide the correct IP address, subnet mask, default gateway and dns servers like requested but clearly I am messing something up.
View 5 Replies
View Related
Feb 27, 2011
I have a Netgear N300 Wireless Router (WNR2000), and I am trying to connect the internet through it. The internet light stays amber, and though the router recognizes it, I can not connect to the internet. My computer also doesn't seem to recognize the router at all. Installation CD will not work either.
View 3 Replies
View Related
Jan 22, 2013
I have an arris broadband modem combo and the wifi signal in the basement is poor I tryed to connect a netgear n 300 wireless router (wnr2000v3) to extend the wifi with an ethernet cable but the neatgear router does not have an internet connection.
View 5 Replies
View Related
Apr 10, 2011
According to the Time Warner website, my Road Runner Turbo with Power boost is capable of download speeds up to 15 Mbps, which seems to be far surpassed by all wireless routers. So what are the benefits of routers such as the Netgear WNR2000 and beyond with speeds up to 300 Mbps vs the Netgear WNR1000 with speeds up to 150 Mbps?
I'm more than willing to spend more for increased performance, but don't fully understand what benefits I'll see by dropping more than about $40 on something like the WNR1000.By the way, I'm in a two bedroom apartment and regularly have two laptops, a PS3, and Droid X connected to the internet.
View 4 Replies
View Related
Jan 3, 2012
This is an older desktop, Been utilizing the net gear to get on the Internet for months and it was working fine,shows it is connected to ssid but ip shows up as 0.0.0.0 I have other home computers hooked up and work g so I located there ip address, can I input it myself ? If so how?
View 2 Replies
View Related
Feb 14, 2013
I recently went to a higher speed ADSL which claimed to be 16Mpbs.. It is with Acanac and when i first tested with speed net it came in over 14Mbps. I was using a netgear wireless g router (old) with the 4200 speedstream modem and got these results which I found acceptable. Now using netgear n router modem combo DGN-2000 and my readings are just over 12 Mbps. I tried reverting and still got the lower speeds. I tried isolating one computer hard wired still got the lower 12Mbps.It hasnt really affected my download speeds as far as I can tell but I did find it a little puzzling.
View 2 Replies
View Related
Dec 19, 2011
Placing a second router behind a cable modem router combination.? My second router is a netgear WNR 2000 the first router is Netgear 1000.How should I configure the the WNR 2000?? Default settings?
View 1 Replies
View Related
Nov 10, 2011
So I have this E1500 Router that worked fine for the past 5 months, then out of the blue, the wireless feature ceased to function... laptops were not being able to connect to the wireless, the router was also not broadcasting the SSID.So, here's what I have done so far:
1. Check the router software settings, all was good there.
2. Did a "hardware reset" pushing the red button. (now this solved the problem, BUT only for a day, when power is turned off for the night, the next day it's non-functional again. The cycle can be repeated daily, but its a pain to reset and set it up everyday)
3. Updated the Firmware, and this somehow solved the problem for 3 Days... and now it's back to non-functional, again out of the Blue.
Is the Router just busted and it's not remembering the settings?
View 2 Replies
View Related
Jul 7, 2012
I have Lynksys router WRT54G. I have 3 laptops in house connecting to internet with no problem. A new person has moved in with a laptop that has windows 2000. The new person is not able to get an internet connection.
View 9 Replies
View Related
May 5, 2011
The first time i had to set dmz i had free tech support from the company. no my free tech support has expired and they want money for tech support now.I would like to know what ip to put in my dmz setting, my ip is supposed to be static, but it changes every few months anyways.I'm aware that having dmz open is a risk, but i have a software firewall.i have my router setup so my 360 and my pc so i need dmz, , if i did not have dmz i would be setting up forward ports for quite some time, as i play multiple pc games.
View 6 Replies
View Related
Apr 13, 2013
I just bought a Netgear Router WNR 2000 v3 and installed it. I got inside the router and could set up a Network Name and security key. However, I can not access the internet when I chose a security password using WPA 2, WPA-PSK + WPA 2 PSK, or WPA/WPA 2. It only accesses the internet when I chose None.( no secured ).At this time, my network is unsecured because there isn't way I can access the internet when I create a security key using the 3 options the router offers.
Note : I have tried the 3 security options creating a key number and my computer connect to the wireless network but don't access the internet. It only access the internet when I select None ( no secured )
View 2 Replies
View Related
Jan 16, 2012
i purchased a Dell N7110 from Dell last week, and a few days later I purchased a NETGEAR PTV2000 wireless display adapter. It was my understanding the N7110 would support the PTV2000; my N7110 specs are below.Originally, I downloaded the required software (Intel WIDI) and drivers from the Intel website.
The laptop and PTV2000 adapter seemed to start fine in that the security code was given on my TV screen and I was able to enter it in the Intel WIDI software. Next step was to select "connect" to the adapter. The connection was initialized, as the green light on the PTV2000 was flashing and my TV screen said "connecting", then "connected". At the moment it said "connected", my laptop screen immediately flashed black, then restored itself approx one second later with the graphics on the laptop screen larger (larger icons) than normal. Approximately one second after this occurred, the connection was lost and the Intel software stated the following error: "unable to send desktop to wireless display, try restarting the application. If the problem persists, try re-installing the Intel WIDI software".
I retried the software numerous times with same results. I uninstalled then re-installed the Intel WIDI software and drivers with the same results. I also uninstalled and re-installed the software, but got them from the Netgear website, and then later from the Dell website (all had Intel WIDI software to download), which all ended in the same results (original problem still exists).After countless tries of running Intel WIDI, the program would on rare occasions, lock up and become unresponsive, while the green light on the adapter was still flashing (connection being made) and the TV message said "connected". The screen never changed from "connect", the desktop image never appeared on the TV, and I would have to use task manager to shut the program down.
Netgear and Intel websites do not address this issue, other than saying "try uninstalling then reinstalling the software", which I did countless times. Web searches hint the real problem is in the Graphics drivers on the Dell - I did find a thread on this site (Dell site) complaining the PTV2000 would not play DVDs or Blueray, and the person changed the Graphics driver, but now cannot get Windows to boot - I believe the Dell techs are currently mailing him software to correct this problem. Because of this, I am very reluctant to change the Graphics drivers as I do not want to cause the same issue on my machine...I have not had any problems with the wifi side of things, in that I am always able to initialize a "connect" without issues, and it tries to connect but just never completely does... tell me if the original problem I stated above can be corrected, and the steps I need to take, or should I return the PTV2000 and forget the whole wireless display idea?
Side Note: I can provide the exact softeware and driver links I used if required, but didn't as there really wasn't much choice - The Intel site, Netgear site, and DELL site all provided short instructions and only one download option; Win 7 32 or Win 7 64. I used Win 7 64 option.
Quantity
Parts #
Part Description
1
62GY1
Base, Notebook, BTS, FCG06, DELL AMERICAS ORGANIZATION..., N7110
[code]....
View 1 Replies
View Related
Dec 7, 2012
I recently got an older dell laptop that doesnt have automatic availability to wifi i had purchased a netgear n300 usb internet thing and it still will not connect to my home wifi how do i fix this?
View 1 Replies
View Related
Mar 26, 2013
Mediacom is my cable provider. They came out a few months ago and thought the problem was their Motorola modem. They replaced it with an RCA (Thomsen) which worked great for about 3 months.Now (3/13) I am losing my connection at least once a day.I started to download the new Netgear Firmware update, but in the middle of that, you guessed it, the connection dropped. So now my router is useless. There's probably a way to reset it, but I haven't found that yet. And so far the Netgear phone # is locked inside the router somewhere! I'm hard-wired to the RCA modem now, so we'll see. I have a feeling, after reading the previous thread, that my connection will be fine.I have my own cable modem, needed for a previous cable provider, and a new Netgear N600 2-frequency router.
View 2 Replies
View Related
Jun 26, 2011
I have an old compaq running windows 98. I just bought a netgear n300 wireless usb adapter, knowing there might be compatibility issues.
View 2 Replies
View Related
Jul 19, 2011
I just got digital cable, phone and internet and when I try to use the digital phone and internet at the same time, the internet wouldn't work. Its connected through Netgear N300. The wireless connection will not stay connected.
View 1 Replies
View Related
Apr 12, 2011
My linksys never dropped a wireless signal in four years of use, this one has dropped 3 days straight.Dunno about the wireless part of the router; Terry, etaf, any input on the quality of this router?
View 2 Replies
View Related
Oct 20, 2011
I'm trying to connect a latop (Packard Bell - Easy Note) onto a Netgear N300 wireless router (WNR2000v3).I have already connected a separate laptop which is working fine but the Packard Bell (about 6 years old) wont connect, it will detect my wireless network but then asks for a "Network Key".I'm assuming this the same password that I set up when I configured the router but when I enter it I get the following message:The network password needs to be 40bits or 104bits depending on your network configeration. This can be entered as 5 or 13ascii characters or 10 or 16 hexadecimal characters".
View 3 Replies
View Related
Jun 25, 2011
I have recently purchased a netgear N300 Dual Band router. I am getting some problems with it! I replaced my bog standard belkin 54g router (which never dropped out, never lagged), you just plugged it in, stuck your isp settings in and away you went. Not the same story with this netgear, it promises to give you a better connection in game, but since installing it, all games lag, my laptop is slow browsing, it is getting to the point where we cannot game at all and I am giving up waiting for websites to load! My xbox is connected with ethernet my laptop is wireless, but both lag. Is it to do with the router settings? I am running windows 7 on the laptop, windows xp on another desktop pc, 2 xboxes, one wired one wireless and a wii wireless. All lag!
View 6 Replies
View Related
Dec 15, 2011
I set a password and everything on my n300's Netgear Genie, but every time I go to routerlogin or 10.0.0.1, it just shows me the full control panel and never prompts me to log in. Isn't security a bit too lax over there? I even click log out and it says i logged out, then I re-visit and I'm always automatically logged in.
View 3 Replies
View Related
Sep 5, 2009
My WRT54GX version 2.0 router is bricked during the firmware upgrade and the file was (WRT54GX_V2_EU_2.00.20.bix) from the linksys support main site. The power LED is blinking and the DMZ LED is off. I can not access to WEB GUI anymore and after many times reseting also pinging the router IP 192.168.1.1 there is no respond from the router. No respond with tftp too. How to flash this router by JTAG or.
View 5 Replies
View Related
Aug 6, 2012
I am trying to use the Netgear WNR 2000 V3's repeater function to wirelessly extend the range of a Linksys WRT54GX V.2. I have the SSID's and channels the same. I had the Netgear working great as an extender with my Apple Airport Extreme base station (equipped with WDS). As far as I know, the Linksys is not equipped with WDS.
View 4 Replies
View Related
Aug 7, 2011
Trying to access my corporate VPN. My laptop can successfully VPN in anytime I'm on the road, but not through my WRT54gx at home. I've enabled the VPN pass through but my expertise ends there.
View 1 Replies
View Related
Oct 21, 2012
The router in on the 2nd floor and I am sitting on 1st floor and the signal fluctates on my laptop and blackberry. keeps going between 3 and 4 bars.. my old linksysm wrt54gx with SRX alway delivered a steady 4 bars. Read what others are saying and believe it.I even tried just using 2.4, split between 2.4 and 5. no better in any combination.I have to admit I do like the configuration screen.
View 3 Replies
View Related
Oct 10, 2011
I got 3 windows 7 pc's at home. IP V6 and IP 4 are enabled. I setup my wireless system and it worked 100%. After 3 months I add a LAN cable to two of my PC's. This is when it all started. My internet browsing became very very slow. When i shutdown the one machine it become fast again. I did the following. Pulled the LAN cable and it was still slow. I then put the cable back and disabled the Wi-Fi and it still was very slow. I rested the defaults and restored my old backup and it still slow. Now I can get any access to the internet any more. I the disconnected the netgear router and take a cheap router with only LAN ports and it work 100%. All the above i did with many router and server reboots.
View 1 Replies
View Related
Jan 10, 2012
have an unknown mac address listed in my router's connected devices pane. There is no ip address or device name listed. I know the mac addresses of the machines I have put on the internet, and i don't recognize that one. Router: Netgear N300 WNR2000v
View 2 Replies
View Related
Oct 23, 2011
I need the security key for my NETGEAR N300 wireless router. I am installing a HP wireless printer.
View 1 Replies
View Related
Mar 18, 2012
I am using a Netgear N300 wireless router to stream Netflix movies to a Samsung Blu-ray player with wireless LAN. My problem is that some of the movies are not watchable because of rebuffering. About every two or three minutes into a film it rebuffs. Is this because of my equipment, my set-up, or is it just the nature of the beast?
View 1 Replies
View Related
Jun 8, 2011
I built my first computer today (woot!) but I'm having issues using my netgear N300 usb adapter to access the internet.
I am using a DLink router but for some reason I am getting some weird issues.
First of all, after using the netgear usb adapter, my mac address is something like E0-xx-xx-xx-xx-xx with the xx being the other numbers. Is having a macaddress starting with E0 wrong? All the other 5 devices on my router have mac addresses starting with 00.
Secondly, I am getting a 169.xxxxxx ip address. This is really starting to bother me because I can't set it up using DHCP.
View 8 Replies
View Related
Mar 8, 2011
How do you connect two routers together to increase signal through the whole house? I am trying to use the n300 as my main router (its hooked to cable modem) and use the 2wire as an access point.The two are connected by a known good ethernet cable.
View 2 Replies
View Related
