url...Yesterday all of a sudden my computer wouldn't load up a lot of websites. A lot of my favorite sites to visit now for whatever reason only load to a certain point than stop. The first picture is from Steam, the second is from a browser. It doesn't matter the browser, because it doesn't load on any I've tested.
View 2 Replies
I recently upgraded my modem and before then my internet connection was working. I was able to connect to websites and all. But once i upgraded it wouldn't allow me to connect. my other computers are able to but not my main one. My ISP told me to bring it in to the shop cause they said something was blocking my connection. I ran some basic things i saw on the internet. i am able to get to web pages through ip address but not through the [URL] type ones.
View 18 Replies View RelatedI have an SMC2804WBR router. It runs slowly and refuses to even load some web sites. If I unplug it for half an hour, it works fine for three or four minutes and then slows right down again. SMC support told me to reset and reconfigure the settings. I tried it twice. It made no difference at all. It works fine for a few minutes after it has been unplugged but then slows right down. I have the cable connection plugged into a PC running Windows 2000 and that is where I have the router plugged in as well. This is not the machine I use on a daily basis. I use a MacBook Pro via wireless. If I purchase a new router that says the operating system can be OS X or at least XP, can I configure it from the MacBook and will it still work with the PC running on Windows 2000? I was thinking of scrapping the SMC and getting a Linksys E1200-CA.
View 1 Replies View RelatedI forgot to mention that all of my electronics with a browser cant load these websites, so it cant just be my laptop. I ran scans, restarted, flushed the dns and even tried changing it to a public dns (but it wont load though, so i didnt). Contacted my ISP, but they kept telling me that my internet connection is just fine. Tried changing my wifi router from a newer one that i borrowed, didn't change anything. And still nothing, it's been a week now, it's just frustrating when you have your break early with no one around + no internet D
View 1 Replies View RelatedI can't load the main page or any user profiles. Can't do it on IE/Firefox/Chrome or the in-game Steam browser. Weird part is that I can use Steam perfectly to play games, Friends system works, etc. Just the websites related to it don't load. Problem started about 2 weeks ago, went away for 5 days, but then came back (only messing with Steam websites again). I know the problem isn't Steam because all my friends have been able to use it normally this whole time.The problem is not limited to my own PC, every computer on my network has the same problem, even iPads/iPhones. I've checked for malware, came up clean; reset router to factory settings, done everything I've been able to come up with and the problem persists.
View 3 Replies View RelatedI am able to ping and tracert websites by name but not load them in firefox or IE. I was able to update minecraft and connect to multiplayer servers to play with others. I have checked the hosts file and am able to telnet [URL] 80 and get a reply in html. I am connected to my modem through a wireless network using a dynamic IP and have uninstalled all antivirus software. The issue started just after installing SpyHunter and running a scan with it.
View 7 Replies View RelatedPages seem to just randomly choose when to load and when to not load I have to F5 3 or 4 times before the page chooses to finally load. I'm also capped at around 12 ~ 17 kB/s which is ridiculous. My internet connection is bad usually anyway (around 200kB/s) and I can live with that but 15kB/s? No way.
Wired
ISP - BT (I think)
Broadband connection - DSL
Router - Netgear N150
Security software - McAfee (did have avg as well but deleted it a while ago. Tried to install it again but the dodgy connection stopped me)
IP Config - Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
Windows IP Configuration
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
I've had this problem for a few months now , I got bt infinty in and the engineer came set up my laptop up and whatever else he had to so (i wasnt there just my daughter ) i came home tried my laptop working and connected no problem , my internet tv was working ok and all the smart phones connected and worked ok but my daughters samsung n130 netbook connected wireless no problem but when you load up her home page using any of her browsers ie, chrome & IE it comes up then when you try to go to a web page nothing happens on chrome it says error 105 , now ive tried everything myself and by doing some research myself it seems its got something to do with the DNS but i dont know how to fix it im really starting to crack up ive seen on other forums about people having the same problem but no one seems to have an answer to it or its very complicated to understand
View 14 Replies View RelatedI have for the past few weeks not been able to load any Valve associated website to be more precise Steam website on my pc. Doeesn't matter whether I use IE, CHROME or FIREFOX. There always appears to be a Gate Way timeout error. This all started about a week ago. Yesterday I still had Steam installed on my computer and Steam Store page in Steam would also not load. Any other game website by Valve also doesn't load. THis error always appears:
Gateway Timeout
The following error occurred:
[code=GATEWAY_TIMEOUT] A gateway timeout occurred. The server is unreachable. Retry the request. contact the administrator.
So today I checked if its only like that on my computer, so I tried loading Steam on my parents computer and it gave me the same error. [URL]
How fun. Earlier this week, my state experienced some severe weather which ended with a tree on our street falling and the power going out all day. It took a bit longer after that for our cable services to be restored - internet included. Ever since then, my computer in particular seems to be screwing things up for everyone else. When my computer is shut off, every other computer (one laptop, two desktops) in the house has been able to connect to the internet and maintain that connection all day. However, as soon as mine connects, the connection dies within minutes - for everyone.
I thought it could be an IP conflict but every machine in the house is set to obtain their IP automatically. Interestingly enough, when the XBOX 360 is bridged through my computer it (the xbox) also maintains a connection, albeit a slower one.I have reset both the router and modem, including hard resets, and I've pinged and pinged and pinged. The same thing seems to happen regardless of whether I am using a wired or wireless connection. Here's what I have:
Computer model is HP DV6838nr.
Modem is Toshiba DAZ8821F.
Router is Linksys wrt54g v5.
I am running Windows 7 Ultimate.
I am using Firefox but have also tried Opera with the same results.
--
+ Computer has been showing a successful connection in the Network and Sharing Center even when websites fail to load and the connection has gone down for others.
+ When trying to use a wired connection for the first time, the computer could not connected. IT jumped back and forth between "Identifying..." and no connection at all.
+ I reset the router with both wired and wireless connections. With the wireless, it would become functional for a few minutes after being reset and then fail again. With the wired, the router would not broadcast at all. I ended up having to unplug it for a minute and then plug it back in to get it to broadcast again.
+ I tried using my cable with just the modem, but the Data and PC lights failed to light up upon doing this.
+ After all of this, I removed the wired connection and re-enabled my wireless on the laptop. Connection was restored for a few minutes.
+ Despite a successful ping after two minutes, most websites wouldn't load.
+ Switched to a different laptop after turning mine off and was able to maintain a normal internet connection for over an hour.After starting up the computer for the first time:
C:UsersManda>ping yahoo.com
Pinging yahoo.com [67.195.160.76] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.[code].....
Interestingly enough, despite the successful pings I was still unable to get most websites to load on my browser.
I have 4 computers using the DIR-615. One of them works just fine (windows 7) the other ones (XP sp3) are very slow, one of which is on the wireless the others are plugged in.
View 3 Replies View RelatedSamsung N130 and all. But the strange thing is that I havent had any problem whatsoever connecting to any wireless internet before yesterday. I couldnt connect and wasnt sure if it was my laptop or if it was the server in the building or something... but when I came to visit my mom later in the day I brought my laptop to test and it woud connect to her wifi... I could go to Google.. I can search but I can't go to any other website.It is extremely frustrating. Especially because I need internet for my job and up until yesterday the N130 was more then doing the job.[CODE]
View 7 Replies View RelatedI'm using DIR 600 for home use. Recently, I noticed that I have trouble connecting to some websites (Twitpic.com, 4shared.com) which I never had any problems before I used the wireless router. It doesn't exactly block the websites but rather it won't load completely (i.e., with Twitpic, I can load the site but not the images; for 4shared I really can't load the page itself).Initially, I had problems updating JDownloader after installation. I tried using our old Edimax wired router, and the JDownloader update worked flawlessly. I also tried loading Twitpic while connected via LAN, and it also worked properly.I'm assuming the problem lies with the wireless router but when I set it up for use I only tinkered with the WPA/WPA2 security for a password-secured wifi connection at home, and nothing more since I can't understand the other features.
View 5 Replies View RelatedFor some time now, I haven't been able to connect to websites from one.com, from my personal network.I've had full access to all those sites before and the only change I've made myself, is changing the standard internet browser from IE to Firefox.At first I thought the problem was on my desktop Win7 computer (which uses a network cable), but after testing the sites on my macbook, with a wireless connection, and having the same issue.
View 4 Replies View RelatedShort version: when running devices through my e2000 into my CM100 modem, internet access is unstable, packets are lost, and certain websites simply will not load. I am using my apartment complex's **bleep** internet (and I have no choice in the matter) which registered the MAC address of the CM 100. When I run through the CM100 directly, everything works fine. What can I do to fix this?
Long version: I have an e2000 router connected to my PC, Xbox, and wireless devices. The router is then connected to a CM100 cable modem. The modem is connected to my apartment complex's internet access. They required the MAC address of the cable modem. The routed showed an apartment complex domain when I went hunting around, but there is no login to it, and I was never told anything else about the connection.
When I run the router through the modem, the internet access is lousy. Certain websites will never load, the connection drops, and packets are lost. When I run directly through the modem, the connection works perfectly.
I note that the CM100 assigns IP addresses if it cannot get any from the ISP, and there appears to be no way to turn it off. I have tried disabling DHCP on the router, but it did not work. I have changed the router's IP address, but that did not work. I have even tried turnign the router into a simple wireless access point, but that did not work. The modem is at 192.168.100.1, while the router is on 192.168.1.1. Should I change my router's location to 192.168.100.x?
Is there a software that can be used to disconnect internet connection on selected system on a lan
View 2 Replies View RelatedI purchased the AE3000 Wireless Adapter for my PC, and has been working fine until now. When I first start my PC, my ping starts anywhere between 20-80, then after I try to access anything on the internet it shoots up between 600-1200. It just started happening about 3 days ago, but now it has gotten worse. I can't play any online games, and websites are slow to load.
View 1 Replies View Relatedlaptop could not connect to wifi. Other laptops can connect to this same wifi but this one can't. tried laptop on other routers and it was able to connect. The error message displays" Windows cannot connect to the selected network.The network may no longer be in range...." tried the solution on microsoft but didn't work. Tried changing the ssid of the wifi then scanned for it. it showed that it was changed. The laptop can detect the wifi but it can't connect to it.The laptop is running on windows xp.
View 2 Replies View Relatedchrome has an application that auto translates any text that is selected, directly in the browser.is there something similar for IE7? I dont wanna install some toolbar or any visible program, just a program similar to the chrome application, that translates selected text and displays it in a pop up.
View 3 Replies View RelatedWindows is unable to connect to the selected network." The network may no longer be in range. refresh the list of available networks and try to connect again." Your in range of the network (right in the same room as the wireless access point). And when you refresh the list, the network still shows up there.It seems that it will only connect to Routers which use WEP security and not ones which use WPA. I have looked on the Toshiba site for the Wireless Drivers to see if there is any updated ones and used the Driver Update Utility on Intel's download site and that tells me that the latest wireless driver is installed.
View 4 Replies View RelatedI loaded in Qwest wireless software for their internet and now I can not open half the pages I use to be able to.
View 1 Replies View RelatedWindows is unable to connect to the selected network. The network may no longer in range. Please refresh the list of available networks, and try to connect again.This message poped up during connecting to a wireless network[CODE]
View 1 Replies View RelatedOur ACS 5.2 is authenticating ASA VPN users with Radius. I would like to use the ACS to authenticate ASA administrator logins with Tacacs. When I modify the ASA Network Device by checking the Tacacs box in addition to the Radius box, ASA VPN authentication stops. Running original 5.2 without any patches on ESX. platform. I thought 5.2 supports radius and tacacs on the same device?
On subsequent tests found that just opening the ASA Network Device and closing the window will also stop the ASA RADIUS from working. Logs don't show any attempt by the ASA to connect and I'm sure that's wrong. To fix it, I reselect all ACS policy items and save the same settings. Sounds like a bug?
I see the router and the modem are working just fine as usual and even the guy from comcast says there is nothing wrong with the internet connection itself.The problems I am having right now are
- I can only access to Facebook, Spotify, but nothing else.
- It sometimes randomly comes back and everything works but then it only lasts for a few minutes-hours and it goes off and won't work again. I've tried resetting the modem, router, and I even tried creating a new network but nothing worked out so far.I currently own a mac and a windows 7 laptop.
[code] after installing the wirless driver, I can see my network but it can't obtain an IP. So I issue it a static IP, and it says I am connected and have internet access. But when i open up IE, doesn't work. Tried Resetting IE, and that didn't work. [code]
View 14 Replies View RelatedI need to allow only a few Internet websites from Cisco 1841 Router for my LAN users. What Access-List should be used for this.
View 4 Replies View RelatedI am trying to connect to the internet using an external wireless device (Netgear model:MA101), I have managed to install the drivers and my wireless network is coming up as an option! For some bizarre reason when I try and connect the following messages appears: "Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try again"I then refresh and try to connect but the message constantly appears I have rebooted my computer in case it needs to reset after installing the driver for the wireless device.
View 2 Replies View RelatedI've been having a really annoying issue with my computer not connecting to the internet wirelessly I start the computer, and a connection is there via my router for about 30secs-2mins. After this, I can't access any websites. The full five bars remain white and the router is still seen by the computer, but there is a small yellow exclamation sign in front of it, and a mouse-over says "no internet access". I can still access when wired to the router through a cable, so I thought it might be an issue with my wireless card, but wireless USB adapters don't make a difference, even when I've disabled the wireless card. My drivers are all up to date, and I've even tried a full reformat and reinstall of Windows 7, to no avail. Other devices (a couple of computers and phones) can connect to the router fine, and the network even tried a new router, with no success. I have experienced this immediately after the reinstall, before either firewall (I use ZoneAlarm Free) or AV (I use Avast! Free) were installed, and I'm completely stuck.
View 19 Replies View RelatedI'm working on a computer that has no connectivity on wired or wireless connections. the wired eth card is a broadcom netlink card and the wireless adapter is an atheros ar5007eg. I found the drivers for the wireless on acer.com and removed the driver that was on here at first and put the one from acer. i cant find a network in range but device manager says its working fine. Then I found out the wired connection isnt working either and im getting the same messages from windows troubleshooter. It says both are "experiencing driver or hardware related issues and "make sure your internet protocol bindings are correct - ensure that ipv4 and ipv6 are selected in the config for the network adapter". it links me to the connection properties and ipv4 and ipv6 are checked off for both. futhermore, in the connection status window it says i have no ipv4 or ipv6 connectivity.
View 6 Replies View Related'Use Unicasting' is selected by default in the Dynamic IP (DHCP) connection type.I turned it off based upon the router's support text since the router gets an IP address from my cable modem.I don't understand this option at all. I've searched for data on the topic and I can't make sense of it.I think I made the correct selection by un-selecting 'Use Unicasting.'
View 14 Replies View RelatedI am having difficulties implementing Mac-auth on selected ports between an HP ProCurve 2510 and Cisco ACS 5.3.The 802.1x works just fine, but for selected ports I need to implement port-access with MAC-based authentication instead of regular 802.1X (yeah, I know, but this line of ProCurve switches only support one auth-mechanism per port!).The switch successfully forwards interesting MAC-auth requests for authentication to the ACS with CHAP/MD5, but the ACS reports this:
Logged At:
April 16,2012 1:20:48.080 PM
RADIUS Status:
Authentication failed : 22056 Subject not found in the applicable identity store(s). NAS Failure:
Username:
002655886b3d MAC/IP Address:
00-26-55-88-6b-3d Network Device:
[code].....
The ACS is configured to use the Internal Hosts database, where the client computer is configured like this;MAC-address: 00-26-55-88-6B-3D
I have some older devices on the network that only support RADIUS (not TACACS) for authentication and would like to have them use SecureACS 5.3
I understand that by default, ACS only supports TACACS for device administration. So I'll get this error when trying RADIUS:
11033 Selected Service type is not Network Access
Description:
RADIUS requests can only be processed by Access Services that are of type Network Access
Resolution Text: Verify that the Service Selection Policy rules are correct
However, even after adjusting the Service Selection rules and seeing hits, I still see the same message in the logs, as if it has no affect.
i have got the below long on the acs 5.2,one the vpn client user connect to asa 5510
Description
Selected Shell Profile is DenyAccess
Resolution Steps
Check whether the Device Administration Authorization Policy rules are correct
