Limited Or No Wireless Connection
Apr 20, 2011
We have 2 houses on the same property only meters apart. The modem is in house 1 where we run 2 laptops and a computer. Another wireless laptop runs from house 2 and connects to the modem in house 1. However the signal on the laptop in house 2 has become very weak and keeps dropping out. I have tested my laptop in house 2 and the signal is strong in both houses and have tested the problem laptop in house 1 and the signal is strong but very weak in house 2. I have had the modem checked and all is working OK. I have had the wireless card in the problem laptop checked and it is working well off the premises. The only thing left to check is the electrical connect between the 2 house.
View 2 Replies
ADVERTISEMENT
Dec 23, 2012
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersAcer>ipconfig
Windows IP Configuration
Wireless LAN adapter Wireless Network Connection 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
[code]....
View 4 Replies
View Related
Dec 31, 2012
I'm trying to setup a router in my moms house. She has DSL and when the box is connected directly to her computer everything works fine. However, if I connect the router her computer reads "Limited or No Connectivity". I can connect to the router wired and wirelessly with my laptop, phone, and even her streaming media box without any problems. I ran IP config and i'm not geting a default gateway address.
View 3 Replies
View Related
Jul 17, 2011
I am using an Del note pad and was using an wireless connection from Talk talk past 45 days and it was working fine. As a sudden now the system is displaying Limited access. when i try to connect the internet - wireless . this is an windows 7
View 1 Replies
View Related
Sep 14, 2011
Every time I want to install the software for it ( whether from the CD or web , new or old ) I get that pop up window during installation : " compatibility issue : skip and continue or stop installation " the program lunches as it should and after entering the WPA network key I'm even able to connect to the Internet . After resetting the PC however I get message in the task-bar that the connection is limited and I may not be able to access some Internet resources. When I click on Fix button it tells me that windows can not fix the problem because it can not turn off the device? I'm running the same card in one of my PC's downstairs and it works fine with windows vista . The one I have problem with is running in win XP pc .
View 10 Replies
View Related
Jul 26, 2011
I have gone through the previous post related to limited or no connectivity.But I am still not able to figure out the problem with wireless connection in my windows xp sp2 OS.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsAnuj>cd ..
C:Documents and Settings>ipconfig/all
[code]....
View 4 Replies
View Related
Aug 31, 2011
i have built my PC from the ground up with what little budget i had, upon completion i started it up and installed my wireless adapter from linksis and i could not connect i went on my netbook (what i am on now) and checked my router and i didn't have any from of connection with my PC so i tried a wired connection and still no joy i have tried a different adapter a Belkin one i have even switched the router
View 1 Replies
View Related
Nov 3, 2011
I purchased this router a few months ago from Dell. It is currently limiting our Internet connection to no more than 2 Mbps down. I originally thought it was our Internet service and them troubleshoot the line but they found nothing wrong. If I bypass the router and connect directly to the modem, we get our normal speed of 10+ Mbps. I've updated the router firmware, tried tweaking according to other tips I've found, but cannot get past the slow speeds.
View 1 Replies
View Related
Dec 11, 2012
I was trying to port fwd my RDP and then I ended up getting side tracted and changed my routers password [URL] it would cause my router to stop working. I know my adapter is fine, because I can connect to the internet via wired connection. My wifi DHCP is not enabled however and I have no clue on how to enable it.
Here is the settings from ipconfig/all
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:UsersAlex>ipconfig/all
[code]...
View 2 Replies
View Related
Jan 21, 2011
Fix limited or connectivity status of wireless connection
View 1 Replies
View Related
Jul 9, 2012
Model: DIR-655
HW Version: A3
Firmware: 1.35EA
One problem with DIR-655.
Drops wireless connection very often. On the taskbar in wireless network center (next to speaker and time) I can find info: Limited Access. Router doesnt drop internet connection but only wireless connection. Sometimes 3-4 times an hour. It's very annoying especially when you upload large files (for example 16-20MB) to your mailbox. It drops connection and we get Limited Access and you can try to upload again and again. Anotner example during VOIP conversations for example on skype it drops and disconnects skype.Firmware was never updated just router was bought with this firmware. We are located in China so its correct.When laptops are connected using LAN cable it works fine but its impossible to keep laptops connected using LAN cables all the time.The problem occurs only when we are connected by wireless.QOS is enabled, WISH is enabled.When QOS and WISH disabled it's same also drops connections on WIFI.
View 7 Replies
View Related
May 6, 2013
I come back to you as I have a linksys e1200 router connected to a modem Zyxel P600 Series exact and every 24 hours it gives me no or limited connection. Change the IP of the router as it was the same as the modem and subcred mask, why these cuts will be as it is router problem because the modem only works perfect.
View 7 Replies
View Related
Feb 28, 2013
I bought a new Dell Inspiron 14Z 5423 last week with windows 8 and I keep getting "Limited" on wireless connections after every few minutes.
I already try every Dell tutorial for maximize the wireless card connections, disabled Mcafee firewall and install and re-install any driver from my "product support" page and from this post and nothing seems to be working.
View 2 Replies
View Related
Mar 29, 2011
My wireless show connected connection give me a 'limited or not connectivity' but a wired connection has no problem?
View 2 Replies
View Related
May 26, 2013
We are having issue with all our Cicso wireless devices (AIR-AP1142N-N-K9) when connected to Windows 8 Pro users. When copying large files, the connection changes to limited access. The initial connection to the access points is also slow for both windows 7 and windows 8 pcs.
View 3 Replies
View Related
Nov 21, 2012
Region : Singapore
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : starhub
1) Always auto disconnect (limited access),
2) My smart phone Motorola MB860 (android 4.0.4) Can connect but can access internet.
3)Always connect to 2.4GHz ,never see connect to 5GHz.
4)Wireless connection 15-20 Max Mbps Only ,LAN can up to 50 Mbps .
View 9 Replies
View Related
Aug 16, 2012
We had a lightning strike near the house and it fried my NIC card (or so I thought), also my power strip. I replace them both along with my Ethernet cables. My internet intermittently goes out, every couple of minutes. I keep getting pop ups saying "Local Are Connection has limited to no connectivity" and/or "a network cable is unplugged".
View 5 Replies
View Related
Jan 30, 2012
I have a laptop that I usually use physically connected to my router, but sometimes I use it wirelessly when I want to lie down in bed.After using it wirelessly yesterday for about an hour,I brought it back to where I normally connect it with an ethernet cable but not I can't access the internet even with the ethernet cable plugged in! And wireless doesn't work either,I have "Limited or no Connectivity" for my LAN Connection and Wireless. I cannot afford a new computer (and I also doubt I need a new one).
View 6 Replies
View Related
Sep 26, 2011
recently we had a small blackout but electricity came back almost immediately. After that I had problems connecting to the internet with one of my wired connection computers (Windows XP). Connection has a Limited or no Connection status and the problem seems to be that the network doesn't assign a new ip adress.
C:Documents and SettingsAdministrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : paloalto
[Code]....
View 18 Replies
View Related
Mar 18, 2011
I am working on development of a Windows based application which connects to a PDA like device over USB & communicates with it using RNDIS protocol. The device has a static IP in the APIPA range (169.254.2.1). When it is connected to PC, Windows allocates a dynamic APIPA IP (169.254.x.x) to the RNDIS adapter. I have confirmed that there is proper connectivity with the device (I can ping it, can access a web server on the device etc.).But the problem is that after Windows allocates the dynamic IP, a 'limited or no network connectivity' message is displayed in system tray.
Since the device & software will go out in the market, display of this message (& exclamation mark on the network tray icon) is undesirable. I know that it can be suppressed by setting property of network adapter, but would prefer a solution that would not require end users to do any settings using APIPA addresses is essential as we would like to avoid conflicts with end users' LAN addresses.
View 5 Replies
View Related
Aug 17, 2011
i am pretty good with computers but this problems got me stumped, my old desktop dell deminsions 4400 will not connect to my home network. So I first reinstalled the driver and plugged the wire in and like magic i had internet. so i took it up stairs, no internet connection. so i whipped out my handy dandy laptop and plug the wire into the cat5 port and i had internet. so this is telling me the wires in my walls are working, my router and modem are working, and my pc is doing something crazy when it changes elevation. I'm about to take it downstairs to see if itll work again
View 2 Replies
View Related
May 3, 2011
I lost my internet a few days ago out of the blue. I have been in contact with my internet provider with no success. None of the troubleshooting options have worked and my security software is giving me warnings; but is unable to scan or update. I've rebooted, done a system restore and reset my IP settings via DOS, which has not worked either. I have full connectivity, just can't identify the network and therefore can't get passed to the internet. I have Windows 7.
View 1 Replies
View Related
Jan 22, 2013
I recently brought a new acer aspire with windows 8, it connects to the router/internet fine except every 10-20 mins (sometimes less) or so I get disconnected, my wifi icon in the tray shows a yellow '!', when I look in the wifi charm (the side bar thing) 'limited' is next to my routers name, but in reality It doesn't seem to have any connectivity atall.
View -1 Replies
View Related
Dec 20, 2011
This afternoon the computer crashed. It restarted normally, however will not connect to the internet. Upon start up, icon states it is connected but will not connect to the internet. When attmpting to Repair connection, Windows is then unable to fix the problem. All other devices work normally on the home network (Laptop, Xbox360).
I have also tried 3 different Restore points, but Windows states it is unable to restore to this point and to select another Restore point on each attempt.
I am running Windows XP SP3 on a Dell XPS
View 4 Replies
View Related
Jun 12, 2012
I found out my onboard ethernet port was fried, so i went out an bought a RTL8139D ethernet PCI adapter. I fitted the adapter and plugged my cable in. It said Limited or no connectivity. After hours and hours of googling I tried everything. I changed the protocols, created static Ip's went into cmd and reset winsock catalogs, release/renew etc. The cable I am using worked previously in my room and it still works. (I took a laptop up to my room and plugged in the cable and had internet connection). So... I took my PC downstairs and used a different cable. This successfully connected me to the internet. That Rules out that my new ethernet card is the problem. MY cable also allows others to connect to the internet. Windows 7 64X Ultimate edition.
View 1 Replies
View Related
Apr 22, 2013
I am currently on Time Warner Cable 10 mbps packge, and am using their wireless DOCIS3 modem/router. It is connected in my bedroom to the main computer. That computer stays connected. However, throughout the rest of the house (we have a two story townhome) it will drop completely or give limited connection...constantly. Sometimes I can have my laptop next to me and it will go out or give limited connection. The connection speed never drops, it just goes completely to no connection. Not for sure what is going on, if its on my end or time warner. Has been doing this for quite some time, the cable company comes out and changes the modem, but that's it, couple days later, goes back to doing it again.
View 8 Replies
View Related
Aug 10, 2011
I have a dell inspiron 15 and I've been having trouble fully connecting to my wireless internet. It says I have signal but gets stuck on identifying the network and I have limited IPv4 and IPv6 connectivity.
Here's the ipconfig if you can identify the issue with it:
Windows IP Configuration
Host Name . . . . . . . . . . . . : M-PC
Primary Dns Suffix . . . . . . . :
[Code].....
View 11 Replies
View Related
Nov 12, 2012
im loosing connection every few minutes , tried ipconfig /release , ipconfig /renew and im getting this error every time : An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server. Request has timed out. After typing ipconfig /all DHCP address is 255.255.255.255 and this IP 192.168.100.10. Tried other things like flushdns / netsh commands and nothing want to work. My connection works only after i restart my modem. Modem type Ubee 3236. The modem is new got it 4 days ago. And also why i cant access the modem configuration page by typing my default gateway in browser ?
View 4 Replies
View Related
Jan 31, 2013
I have tried renewing my ip address from the cmd prompt i have tried ipconfig/release, ipconfig/flushdns,ipconfig/renew and it didnt work my connection still keeps on going back to limited or no connectivity my DHCP is connected and i have default gateway ip i can get good connectivity if i reset the router by unplugging it but it still goes back?
View 19 Replies
View Related
Dec 28, 2012
when im on my laptop and im on the internet,the connection goes from normal to Limited (yellow triangle caution sign by connection),non of the pages will load after that,i use diagnostics repair to fix the problem which works about 40% of the time,but is only temporary again.give it 5 minutes after the fix it happens again,diagnostics say the problem is with the wireless adapter card which is built into the laptop itself.i do and dont think this may be the cause since everything house loads perfectly fine but can have the occasional drop out aswell,on average i'd say it drops out about 10 times a day and i find it kind of frustrating.My Laptop is a Acer Aspire v3-531.My internet is with Virgin Media and i get around 60 MBps with them but the disconnections drop it to about 7mbps and keeps going down till the connection is actually gone.
P.S:The intel Proset wireless framework on this computer fails the hardware test straight saying the wirless hardware is not bound to the transport driver? what do i do?
View 14 Replies
View Related
Oct 21, 2011
Network Adapter (as displayed in device manager) Realtek PCIe GBE Family Controller (says this device is working properly)
Motherboard chipset
Intel p67
Processor
i5 2500k
Windows 7 x64
I'm running my lan on the integrated network adapter "Realtek PCIe GBE Family Controller" on my motherboard. When I plug in the lan line directly from my router the speed on speedtest.net is around 2 Mbps, i have tested on 2 other computers and they all get around 10 Mbps with the same line. I build this new machine to play games, and sank $800+ on it. I am trying very hard to figure out why my LAN speed is so slow.
I am worried it is a mother board defect, but it is unlikely as I can still browse the internet and stream video. I just get slower download speeds and more lag in games which defeats the purpose of building a gaming computer . I have disabled my avast and my windows firewall to test the speed.
I have also tried buying a wireless card (Netgear N300 Wireless PCI Adapter) and it peaks at around the same 2Mbps. My other computers get 6+ Mbps wireless on speedtest.net at the same location from the router.
Because both LAN and wireless seems to be caping out at 2Mbps could this be an indicator of some sort of internal limiter on internet speed? Or even worse, hardware defect? I'm going to get a USB wireless adapter tomorrow and test the speed.
View 3 Replies
View Related
Aug 2, 2012
I started having this stupid problem after i built my first computer, in my old computer it was all fine, am using an ethernet cable between my pc and laptop, it is crossed or whatever its called, when i plug it in it gievs me an error, limited connection or no connectivity which pisses me off, i have all the drivers installed everything is up to date.. sometimes it connects, but after 10 mins it disconnects again, and sometimes it works fine until i reboot my pc..
View 17 Replies
View Related
Dec 7, 2011
When I connect to the network, everything is fine for awhile, but then I get Limited Connectivity. It's fixed easily, I just disconnect and re-connect to the network, but I was wondering how I could fix this permanently. The amount of time I have before each time it goes Limited varies, could be 5 minutes to a few hours. And I know it's not the network but my laptop because other laptops connect and have no problems. I am on Windows 7 64-bit[CODE]
View 9 Replies
View Related
