Wireless Router Limited Connection (DHCP Not Enabled)
Dec 11, 2012
I was trying to port fwd my RDP and then I ended up getting side tracted and changed my routers password [URL] it would cause my router to stop working. I know my adapter is fine, because I can connect to the internet via wired connection. My wifi DHCP is not enabled however and I have no clue on how to enable it.
Here is the settings from ipconfig/all
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:UsersAlex>ipconfig/all
[code]...
View 2 Replies
ADVERTISEMENT
Feb 14, 2013
am trying to connect my laptop withgalax tab via mobile AP configuration, it give me this error {dhcp is not enabled for wireless network connection}
View 1 Replies
View Related
Jul 7, 2012
I've been trying to set my IP to a static IP so I can host servers for a few different games and every time I change the IPV4 settings my internet stops working and when I troubleshoot it says "DHCP Not enabled for local area connection.".
View 5 Replies
View Related
Dec 8, 2012
dhcp is not enabled for local area connection in windows 7" my error is this and each time when I on my pc it will ask for a new connection..
View 2 Replies
View Related
Dec 13, 2011
When I have both 2,4 and 5,0 GHz band enabled on the E4200 router my PC (WMP600N-PCI adapter) has max. 130Mbps.When I enable only the 5,0 GHz band it has a speed of 270Mbps.The same speed issue with my Dell laptop.Router and PCI adapter are new (3 days old) and both have the latest firmware.Both PC and laptop are running on W7.how to increase the speed with both bands enabled?
View 6 Replies
View Related
Nov 3, 2011
I purchased this router a few months ago from Dell. It is currently limiting our Internet connection to no more than 2 Mbps down. I originally thought it was our Internet service and them troubleshoot the line but they found nothing wrong. If I bypass the router and connect directly to the modem, we get our normal speed of 10+ Mbps. I've updated the router firmware, tried tweaking according to other tips I've found, but cannot get past the slow speeds.
View 1 Replies
View Related
Feb 1, 2012
I'm seeing some weird behavior trying to connect my Windows XP SP3 desktop via a USB wireless to my Windows network via Linksys WRT120N Router. It is unable to connect with DHCP. "Limited or No Connectivity" is shown on the network icon and no internet connectivity is present. When i manually assign a static IP, i am able to get connectivity to browse the internet, and I am able to ping the other computers in my network, but I am unable to view the windows workgroup. I am able to manually map network drives, but those drop continually. There seems to be no rhyme or reason to the connectivity and the dropping while I am using the static IP. DHCP does not work at all. I'm just trying to get this computer connected to the windows workgroup so that I can map network drives and printers once and for all. Right now the rest of the network (ethernet cabled to router) works fine. I'm thinking it may be something in the routers wireless config, as I am having the same issues (DHCP not working at all, static IP working but constantly dropping) with a Mac laptop.
View 3 Replies
View Related
May 6, 2013
I come back to you as I have a linksys e1200 router connected to a modem Zyxel P600 Series exact and every 24 hours it gives me no or limited connection. Change the IP of the router as it was the same as the modem and subcred mask, why these cuts will be as it is router problem because the modem only works perfect.
View 7 Replies
View Related
Jan 19, 2011
Ethernet adapter Local Area Connection 2; DHCP Enabled: No
View 4 Replies
View Related
May 9, 2012
My WAP4410N is configured with 4 seperate SSIDs. Two of the SSID status are showing "Enabled". The other 2 are shown as "Connected". The one that are showing as Enabled are not receiving any packets. Devices connected to the SSID that shows "Enabled" are unable to connect to the network. Any one else encountered similar issues before? This issue just surfaced few hours ago. The device has been using for around 2-3 years with minimal issues.
View 1 Replies
View Related
Aug 30, 2012
Until a couple of days ago I was able to connect to the internet wirelessly on both my laptop as well as my desktop. However, that has changed for the desktop, now I am unable to access the internet on it. It says that it can detect the signal. When I tried to renew the ip it responded with "An error occurred while renewing interface Wireless Network Connection : unable to contact your DHCP server. Request has timed out." [code]
View 5 Replies
View Related
Nov 30, 2012
I have just installed the wireless equipment on my main computer, but unable to pick up the internet on my 2nd computer, how do I do it??
View 1 Replies
View Related
Apr 20, 2011
We have 2 houses on the same property only meters apart. The modem is in house 1 where we run 2 laptops and a computer. Another wireless laptop runs from house 2 and connects to the modem in house 1. However the signal on the laptop in house 2 has become very weak and keeps dropping out. I have tested my laptop in house 2 and the signal is strong in both houses and have tested the problem laptop in house 1 and the signal is strong but very weak in house 2. I have had the modem checked and all is working OK. I have had the wireless card in the problem laptop checked and it is working well off the premises. The only thing left to check is the electrical connect between the 2 house.
View 2 Replies
View Related
Apr 11, 2012
We are using a domain and Windows Server 2008 machine with DNS/DHCP setup and active to handle traffic on the network. The old router we had was a cheap (~$20) TrendNet that was configured (not by me) without issue to not only allow the server to handle IP's but also allow us to get in to the server remotely via Remote Desktop. My cut sheet says they had a "virtual server" setup.
Anyways, we now are running an E2500 and if I put in the external IP, Subnet, Gateway, and DNS for our internet provider and then disable DHCP on the router, we don't get internet access. I'm missing what configuration I need to get the server to handle all the traffic I guess. The server has DHCP enabled with the router IP address (192.168.1.1) set and the server address is (192.168.1.2). Like I said before it was working fine with our old router and none of the settings on the server have been changed so must be something with the new router.
Do I need to setup something in the advanced routing to get this working? Currently I have DHCP on automatic and DHCP server enabled just so we can get internet access. DHCP services on the server are still on as well. Can't get any access to the server from the outside via Remote Desktop like we could before.
View 9 Replies
View Related
Dec 23, 2012
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersAcer>ipconfig
Windows IP Configuration
Wireless LAN adapter Wireless Network Connection 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
[code]....
View 4 Replies
View Related
Dec 31, 2012
I'm trying to setup a router in my moms house. She has DSL and when the box is connected directly to her computer everything works fine. However, if I connect the router her computer reads "Limited or No Connectivity". I can connect to the router wired and wirelessly with my laptop, phone, and even her streaming media box without any problems. I ran IP config and i'm not geting a default gateway address.
View 3 Replies
View Related
Jul 17, 2011
I am using an Del note pad and was using an wireless connection from Talk talk past 45 days and it was working fine. As a sudden now the system is displaying Limited access. when i try to connect the internet - wireless . this is an windows 7
View 1 Replies
View Related
Sep 14, 2011
Every time I want to install the software for it ( whether from the CD or web , new or old ) I get that pop up window during installation : " compatibility issue : skip and continue or stop installation " the program lunches as it should and after entering the WPA network key I'm even able to connect to the Internet . After resetting the PC however I get message in the task-bar that the connection is limited and I may not be able to access some Internet resources. When I click on Fix button it tells me that windows can not fix the problem because it can not turn off the device? I'm running the same card in one of my PC's downstairs and it works fine with windows vista . The one I have problem with is running in win XP pc .
View 10 Replies
View Related
Apr 20, 2011
I have a Gateway 818gm desktop pc and the wifi stopped working after I reformated the hard drive. I can not figure out where the wifi card is in this PC.
View 1 Replies
View Related
Jul 26, 2011
I have gone through the previous post related to limited or no connectivity.But I am still not able to figure out the problem with wireless connection in my windows xp sp2 OS.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsAnuj>cd ..
C:Documents and Settings>ipconfig/all
[code]....
View 4 Replies
View Related
Aug 31, 2011
i have built my PC from the ground up with what little budget i had, upon completion i started it up and installed my wireless adapter from linksis and i could not connect i went on my netbook (what i am on now) and checked my router and i didn't have any from of connection with my PC so i tried a wired connection and still no joy i have tried a different adapter a Belkin one i have even switched the router
View 1 Replies
View Related
Jan 21, 2011
Fix limited or connectivity status of wireless connection
View 1 Replies
View Related
Jul 9, 2012
Model: DIR-655
HW Version: A3
Firmware: 1.35EA
One problem with DIR-655.
Drops wireless connection very often. On the taskbar in wireless network center (next to speaker and time) I can find info: Limited Access. Router doesnt drop internet connection but only wireless connection. Sometimes 3-4 times an hour. It's very annoying especially when you upload large files (for example 16-20MB) to your mailbox. It drops connection and we get Limited Access and you can try to upload again and again. Anotner example during VOIP conversations for example on skype it drops and disconnects skype.Firmware was never updated just router was bought with this firmware. We are located in China so its correct.When laptops are connected using LAN cable it works fine but its impossible to keep laptops connected using LAN cables all the time.The problem occurs only when we are connected by wireless.QOS is enabled, WISH is enabled.When QOS and WISH disabled it's same also drops connections on WIFI.
View 7 Replies
View Related
Feb 28, 2013
I bought a new Dell Inspiron 14Z 5423 last week with windows 8 and I keep getting "Limited" on wireless connections after every few minutes.
I already try every Dell tutorial for maximize the wireless card connections, disabled Mcafee firewall and install and re-install any driver from my "product support" page and from this post and nothing seems to be working.
View 2 Replies
View Related
Dec 20, 2011
Could I use DHCP for wireless connection and assign private IP for PC for wire connection ?Will it conflict to each other ?
View 3 Replies
View Related
Oct 14, 2011
After an upgrade of the WRT120N to firmware Ver.1.0.06 (Build 01) every device I have tried to use WPA authentication with will authenticate / associate with the device then drop the connection just prior to recieving a DHCP address.I have tried a Dell latitude laptop with the broadcom chipset, an iPhone 3GS as well as an motorola with google pad device and all experience the same problems.I have removed all mac address filtering, and re-enabled the essid broadcasting only to have the same problem persist despite stripping everything down to just WPA.
View 2 Replies
View Related
Mar 29, 2011
My wireless show connected connection give me a 'limited or not connectivity' but a wired connection has no problem?
View 2 Replies
View Related
May 26, 2013
We are having issue with all our Cicso wireless devices (AIR-AP1142N-N-K9) when connected to Windows 8 Pro users. When copying large files, the connection changes to limited access. The initial connection to the access points is also slow for both windows 7 and windows 8 pcs.
View 3 Replies
View Related
Dec 13, 2011
i am configuring a 3560, everthing is fine until i enable the "ip routing"
i lost connection to all vlan
View 18 Replies
View Related
Nov 21, 2012
Region : Singapore
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : starhub
1) Always auto disconnect (limited access),
2) My smart phone Motorola MB860 (android 4.0.4) Can connect but can access internet.
3)Always connect to 2.4GHz ,never see connect to 5GHz.
4)Wireless connection 15-20 Max Mbps Only ,LAN can up to 50 Mbps .
View 9 Replies
View Related
May 27, 2012
Ever since I bought the E4200 months ago I had no wireless network between my laptops. pc's devices. I discovered now that I do have network (everything cool) when I disable NAT. That is all nice, but I don't have internet then.
View 8 Replies
View Related
Sep 11, 2012
Hardware: RV082 V03
Firmware: RV0XX-v4.2.1.02
Lan: 192.168.1.0/255
Static routing: 192.168.1.239 to 172.25.152.64/224
The unit is configured as internet gateway. 4 NAT ports are active. When firewall disabled all works fine. When firewall enabled I do get connection lost at random interval. In firewall only 4 rules added to the default 3 rules. The added rules are:
1/ permit 192.168.1.22 port 25 to any
2/ permit 192.168.1.27 port 25 to any
3/ permit 192.168.1.10 port 25 to any
4/ deny any port 25 to any
I do get at random times connection lost when navigating with windows explorer on a PC with IP 192.168.1.x to a share on a PC with IP 172.25.152.74. The same happens when copying files. Sometimes it works, later it fails or reties are needed. When the firewall is switched off all runs fine.
Ping from 192.168.1.x to 172.25.152.74 allways give a <1ms response
Is there a RV082 perfomance problem or do I have a configuration problem?
View 4 Replies
View Related
Mar 30, 2011
My router is running the stock 1.21 firmware and it has been fine for almost a year before the wireless suddenly stopped working. I reset the router and restored my previous configuration. After the reboot, the SSID is visible and I can connect to it but there is no internet connection. Also the router becomes unresponsive, i.e. timeout trying to access the router configuration page. After trying out different settings it seems that enabling WPA2+AES is the cause.In the mean time, I am running an open wireless network and everything seems fine. Is the hardware faulty? I am reluctant to update the firmware because of a negative experience with another router (same model).
View 2 Replies
View Related
