Linksys Cable / DSL :: WAG320 Some Webpages Don't Load?
Jan 21, 2011
I have wag320n router (FM ver. 1.00.08), some webpages (for example [URL]) don't load, but several load (for example yandex.ru). By changing MTU value on my PC I can solve this problem and this sites will load properly. But can't do this on my mobile devices (for example smartphone, PSP) and I have to set MTU value on each computer, connected to my network. So I want to find out, how solve this problem on the "level" of the router.
View 8 Replies
ADVERTISEMENT
Feb 14, 2011
I just purchased a WAG320N to replace my WAG160N, and want to link the two, using the 160 as a 'range extender' to improve the coverage of the network through my house. Unfortunately, I have a phone point at each end of the house, so the modem/router has always been at one end, leaving the other with patchy coverage.
Is there an easy way to do this? I know products exist that are dedicated for this job, but I would like to use the ports on the second modem to link my BD and IPtv. In the future I am looking to run some wired cabling through the walls, but this will not be happening for several months, so I would like to get this happening in the meantime.
View 2 Replies
View Related
Jan 11, 2010
I have bought a WAG320 & ever since I've had it the ADSL line keeps dropping every few hours. The LAN network is fine & I have 7 computers connected to the router wirelessly. When I press the re-set button on the back of the router everything is fine for a few hours then it starts doing it again?
View 9 Replies
View Related
Mar 16, 2013
I'm having this problem with the ea4500 where occasionally web pages will not load. The internet doesn't go down, but the page will just not load. Meanwhile other sites WILL load at the same time. After a minute or two, the site will load and there will be no problems. I searched for this problem, and found changing the MTU may work, but from what I read, those people never could connect to the websites in the first place. I've tried changing the MTU, but it appears it keeps on happening. Also, I am able to play a video game at the same time, which is connected to the internet, that never goes down.
View 3 Replies
View Related
Nov 8, 2012
first connect to configuration page is very slow
Second issue: after updating to FW 1.0.4 any web pages doesn't accept any passwords. I can not login to some sites. After reset to Factory defaults I can not configure router - password for ISP doesnt accepted and saved... so internet doesn't work. After rolling back FW all configuret and works fine
View 2 Replies
View Related
Jul 10, 2011
For a while in our house we were using only US Cellular Broadband connect, which is essentially a mobile 3G USB adapter. We uninstalled this from all the computers when we recently got Charter cable internet which is being broadcasted wirelessly with a Netgear cg3000d-rg. I know that the US Cellular broadband turns off wifi connectivity, but we made sure to uninstall all the drivers and software. We have 2 comps running XP and one Macbook, all able to connect to the new router. One Acer Aspire One is the holdout. It connected wirelessly fine before, but now will not work. It says it's "connected" and assigns an IP, but no matter what browser it will not load any webpages.
[code]....
View 1 Replies
View Related
Mar 10, 2012
I have 2 laptops and 1 desktop in my household.Lately, I have noticed that webpages take way too long to load. Speedtest reported 2Mbps download and 0.07Mbps upload (that upload speed is not good, is it?)So on my main desktop I looked at the Send/Receive of the packets right after start-up and it showed like 200,000 sent and 7,000,000+ received. that is not normal, right?On my netbook, I looked at the packets and it showed 200,000 sent and 23,000,000+ received. I am thinking there is definitely something wrong with one or both of them.This laptop I am on right now is the only one not suffering from connectivity problems. Without the other two computers connected to the network, my web-surfing is completely normalAnyway, I dont know what the problem is, but I can't do anything on the internet. I can barely open a page on Google with those 2 computers. It's terrible. I have run Virus Scans and Malwarebytes + SUPERantimalware scans and ALL have come back negative. So...[CODE]
View 7 Replies
View Related
Apr 6, 2013
i have a linksys x3000 router, is there anyway of getting into the routers control panel to see the previous webpages that have been viewed over the wifi connection?
View 3 Replies
View Related
Sep 22, 2011
I have a new ASUS Eee PC notewbook, dual core.. Windows 7..I can connect to my wireless network but it wont let me load any webpages on Chrome and with IE I can sometimes get Google (homepage) but cant go anywhere. On my older laptop, I can surf no problem, I'm here, so I know my network works.. When I use the Windows trouble shooter it fixes my adapter, but the problem persists.
View 1 Replies
View Related
Jan 25, 2011
My Asus eee pc netbook won't load webpages. It is connected to the internet, but won't load pages. I know it isn't the internet connection because others are able to access it on their computers on the same network.I've tried uninstalling/reinstalling my network adapter. I've put the power save mode on my adapter to off. I uninstalled Norton. I've turned my firewall off. It won't load in Firefox or IE.If I repair my connection, it works for about 30 seconds, and then will stop loading.
View 4 Replies
View Related
Jul 31, 2012
So I recently came down to my parents place for a holiday and ever since I started using the internet here many websites are not loading (firefox, ie and google chrome alike) they usually show an error /problem loading page message. All webpages open fine on the wireless router back at my place.
Also, all the webpages seem to load fine on other PC's in the house. I have scanned using kaspersky twice, there were no threats. And I tried using Hotspot Shield - and all the websites load only when hotspot shield is on.
View 1 Replies
View Related
Apr 15, 2011
Its been a long road but this is where Im at right now. I have a complete fresh install of XP SP3 on a dell inspiron 9300. I was having this issue and with all the troubleshooting steps taken that did not work, I decided to re-install windowsTurns out the internal NIC does not work (at all it seems), so I have a USB NIC. Itinstalled correctly and detects the network. I can log into our Domain, ping seveal websites (yahoo, assassinarcade.com (my personal website), blogger.com) but IE8/FF will not load the web pages. The NIC has a valid IP address with correct DNS and DHCP IP addresses to their respective servers[CODE]
View 9 Replies
View Related
Aug 27, 2012
I've been having this problem for around two years on my current laptop, but today it finally got so frustrating I had to ask about it. I've tried and tried to search for others with a similar problem, but have never found a good solution. When my computer turns on and connects to an internet source (LAN or wifi), it will work fine indefinitely. However, if I join a different LAN or wireless network later, such as when I go from home to school, it will connect to the new network, but after a few minutes, I will be unable to load any web pages (Connection timed out).
Skype and email still work fine, and the only browser I use is firefox, so this may be a firefox-specific issue. If I reset the network adapter being used, then I will be able to load websites again, but after 2-30 minutes, I will run into the same issue and have to reset the adapter again. Joining a different network does not resolve the problem. Restarting firefox does not resolve the problem. Clearing the firefox cache is a temporary solution only, similar to resetting the network adapter. Restarting the computer entirely will result in no connection problems, until I have to change networks again.
Specs are below, and again, I connect to the internet using firefox 14.0.1 Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz, Intel64 Family 6 Model 30 Stepping 5 Processor Count: 8 RAM: 4030 Mb Graphics Card: NVIDIA GeForce 310M, 512 Mb Hard Drives: C: Total - 464783 MB, Free - 133483 MB; Motherboard: TOSHIBA, Portable PC Antivirus: Microsoft Security Essentials, Updated and Enabled
View 2 Replies
View Related
May 31, 2012
I have been having some trouble lately with my internet since I have been home from college. I have no problem connected to my router wirelessly, and I always have a strong connect seeing as I am no more than 15 feet from the router. The problem arises sporadically for different intervals. One second I will be browsing the internet with no problem, and the next second I am unable to load any pages.
I was just in a Skype conversation with one of my friends and had a perfect connection with them. I was on twitter at the same time, when suddenly the pages stopped loading. The weird thing is, my connect was still strong while video chatting and it did not cut out. Why my web pages will not load while I still apparently have a strong connection.
View 1 Replies
View Related
Apr 24, 2011
My Internet is connected as I can load pages through my iPhone on my wireless signal BUT on my laptop the only page that will load is my UniSA home page and my Uni email - nothing else will load - I have tried Mozilla, IE & Safari and get the same response with all of them. Don't know if I have accidentally done something or what?
View 5 Replies
View Related
May 26, 2012
I have an internet connection but web pages will not load.I just brought my computer back home from college and installed an xavb1004 and it is working as i have tried other devices on it so I do not believe it is that. Also I have tried just about everything getting this to work including but not limited to winsock changing all the internet settings making sure no boxes are checked, changing my dns server disabling firewall and all the basic stuff.
View 12 Replies
View Related
Oct 30, 2012
My internet at times fails to work. I will be browsing and webpages will fail to load until I wait 30sec or so and refresh the page a few times. This happens every 3ish minutes. However, I am still connected to wi-fi according to my computer and there is still internet access (at least it says). I can also disconnect from wi-fi and reconnect and the problem goes away momentarily.
I know this happens on Chrome and IE, so it is not the browser. And, the internet is just find on other computers at my house so I do not believe it is the router.
View 6 Replies
View Related
Jan 7, 2011
Have Cradlepoint MBR900 router. Internet will connect through router and shows connected but cannot load any web pages.I am able to search through google, load msn, etc but will not access web pages. Internet works fine when connected directly to lap top.
View 4 Replies
View Related
Aug 8, 2011
my computer wont load some videos on the internet. youtube works fine though, also a majority of the time, my internet doesnt even load the page and just sits there with a blank screen making out it loads. and on facebook, the chatbox barely appears let alone even show me whos online. i have tried deleting all the temorary internet files, cookies, history, form data, passwords and inprivate filtering. i also tryed freeing up space and i deleted about 12gb of crap i didnt need[CODE]
View 1 Replies
View Related
Mar 3, 2011
I recently bought a starcom modem from cricket. I installed it and it shows That I'm connected, but my Internet explorer won't open web pages.
View 5 Replies
View Related
Jan 5, 2013
My Dir-615 E1 5.01 works fine, daughters Iphone, laptop connect fine. My Droid Max android phone connects with no problem but does not load web pages or sites. Phone does work great at other wifi spots just not at home with this DLink. My last android phone acted the same way, cannot use wifi at home! Not a password issue cause it does connect and has strong signal.
View 3 Replies
View Related
May 3, 2012
I recently implemented an ASA 5520 HA pair with CSC-SSM-20s in each non stateful per cisco. The CSC management sits in a management subnet 192.168.4.0/24 with the management interface of the ASA as its default gateway in the same subnet. Ever since the implementation frequently webpages will not load correctly, the formating will not look right and pictures will be red x. If you hit f5 to refresh the pages loads fine. If I add a deny any any eq 80 rule before the permit any any eq 80 the issue appears to go away. TAC can't seem to find anything worng. All we want to do is use a simple web content filter with the check boxes in the global filtering policy. ASA is running 8.2(5) and CSC is running 6.3.1172.0. Everything else works fine SVC and rules and such. [code]
View 2 Replies
View Related
Dec 5, 2011
webpage A will take 1 second to load, and webpage B will take 6 seconds to load. After a browser refresh, webpage A might take 5-8 seconds to load, and webpage B will take 1 second to load.
Hardware rev A1 Firmware 1.13NA
Router is about 2 years old.
I tried resetting the router prior to the firmware update, no different. This is happening on both PC's. I tried a direct connect to the modem, and it seemed to work fine, but this doesn't always happen.
View 13 Replies
View Related
May 20, 2012
Whenever I use my router web pages often fail to load. Then after about 30 or seconds or so it will start working again. Even worse,if I go to game online I will have lag like crazy. Even if I am the only one on the router.I'm using a D-Link n300 gigabit router.
View 5 Replies
View Related
Apr 14, 2011
First few attempts to load a web page after a reboot are okay, then it begins to stall with no error, or sometimes an "empty response" error message. I simply cannot load web pages. Checking mail sometimes stalls. When this happens, the Thunderbird process hangs around after I've exited the application using 50% cpu. I didn't discover this until just recently. Even when connecting to my own router 1 hop away, the admin web page timed out. Other things like downloading software updates and online help seem to be unaffected. FTP connection sometimes stalls. SSH takes forever (~10 seconds) to get a login prompt. Connecting directly to the cable modem has no effect. No other PC in my home has any problem getting online. I've tried changing DNS servers with no luck. Same problems with Ubuntu running in a virtual box in Windows. I can get online in Safe Mode. During the malware detection there was a question about my proxy settings, which showed up in a system scan, slowing me down. I didn't think that was contributing to the problem, but I've since deleted them and still no improvement. I just completed a round of malware detection in the other forum and my system appears clean, so I decided to come here and give it a shot.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Professional , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz, x64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 3070 Mb
Graphics Card: NVIDIA GeForce 8400M GS , 128 Mb
Hard Drives: C: Total - 294907 MB, Free - 69444 MB;
Motherboard: Dell Inc., 0JX269, , .42MCPH1.CN7878389N001F.
Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled
View 8 Replies
View Related
Mar 1, 2012
How much load (DATA) cat-6 cable can handle over a length of 100 meters?
View 2 Replies
View Related
Dec 13, 2012
I have a modem Scientific Atlanta 2100. I just installed windows 8 pro 64bit and when installing the driver to use the usb cable modem does not recognize it and simply not installed. I wonder if it is possible to use my usb cable modem or simply incompatible with my windows 8 64bit pro.
View 3 Replies
View Related
Apr 23, 2013
With this modem, can you hook up to the Linksys Smart Apps WiFi?
View 2 Replies
View Related
Mar 14, 2013
Our family has about three computers that use a wireless network that we all share. We have an old Gateway, a WCG200, that is bridged to an E2000, which was set-up ever since we required better security when someone used our connection to illegally obtain movies. We got a letter which warned us of any future violations that could cause legal action, so we looked into our wireless connection to better secure it from any other individuals outside of our household. The WCG200 is connected to the outlet in the wall via cable, and then connects from the Ethernet to the E2000. The E2000 has a stronger security setup than the WCG200, which is the advice we received from our ISP and would allow us to keep the Gateway. It provides a strong signal, but from time to time, we suffer latency or slow loading through all of our online devices, even though our connection speed displays a solid 72.0 Mbps. I've tried the Event Viewer to see any problems, and I have noticed some small things:
- WLAN AutoConfig service has successfully stopped.Wirel?
- WLAN Extensibility Module has stopped. Module Path: C:WindowsSystem32cmihvsrv64.dll
- The server {E10F6C3A-F1AE-4ADC-AA9D-2FE65525666E} did not register with DCOM within the required timeout.
- Broadcom NetLink (TM) Gigabit Ethernet: The network link is down. Check to make sure the network cable is properly connected. [This last one is strange, since I use the Wireless Network Connection with a DW1501 Wireless-N WLAN Half-Mini Card, while the Broadcom adapter is under the Local Area Connection and displayed as not connected.]
Other than that, I'm not quite sure what the recurring problem comes from. Our WCG200 has a firewall enabled and our E2000 has an SPI firewall enabled. The security mode of the E2000 is a WPA2 setup. We have disabled the wireless network of our WCG200 in order to make use of the E2000.
View 9 Replies
View Related
Feb 24, 2012
I have a WAG160N wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.
What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ?
View 1 Replies
View Related
Mar 24, 2011
I inherited a BEFCMU10 v.3 cable modem from my boss who switched to FiOS and I would like to use this with my Comcast connection.All I received from him is the cable modem and power adapter, what do I need to install and get this cable modem working? My router is WRT-54G.
View 2 Replies
View Related
Mar 23, 2012
I can't get a new IP from my ISP when my Cable modem router(EPC3925) is set to router mode, i have tried factory restore, unplugged etc..but still no luck. It changes each time i reset it when i set it to bridged only mode but then i won't be able to connect other devices to it since it doesn't uses DHCP in bridged only mode. It changes back to the IP i had when i set it to router mode. I don't want to change my router settings to bridged only because it would disconnect the other devices in my house. Why my ISP assigns the same IP address when it's set to router mode but assigns different IPs when it's set to bridged only, how is this possible ?
View 1 Replies
View Related
Jun 4, 2010
some reference material about configuring my WAG320N to use my cable modem via Ethernet port 1. I've seen it mentioned that's its possible, however I've been unable to sort it out myself.
And before you ask, I've brought the DSL router as I'm moving in the next 12 months and my new base will not have access to cable internet and I'll be reverting back to DSL.
View 8 Replies
View Related
