Linksys Wireless Adapters :: WUSB300N Not Connecting With E4200
Feb 17, 2012
i purchased an E4200 router to replace my old WRT150N. I had a WUSB300N that connected fine to the old router, but it's not connecting to the E4200. I have a guest network set up on it, and the adapter can connect to that, so I'm at a loss as for why it won't connect. Does anyone think it has something to do with the type of security I have set up? I had it on WPA2 on my WRT150N, and the E4200 on WPA2/WPA mixed mode.
View 2 Replies
ADVERTISEMENT
Sep 25, 2011
I'm at a new apt and I can't get Online with vista to download the driver so I've been trying to download it on a droid or iPhone and transfer the file any know any way to do this besides finding a cd? Can I make a cd at a friends house by downloading the driver online? Where can I get the driver?
View 1 Replies
View Related
Jun 5, 2011
Is there a driver or will there be a driver to work with WUSB300n adapter running Windows 7 64-bit Home Pro edition ?
View 1 Replies
View Related
Dec 27, 2012
After update at win 8 I had problems with the functionality of the WUSB300N. I installed manually the old driver and I have now the limited network and I can not use it.
View 2 Replies
View Related
Jan 4, 2012
I have an AT&T Gateway Wireless router to connect to Internet with my wired computer. In another room, I have another wired computer I also use to connect to Internet. I never have problems connecting to Internet from computer that is hooked up to the router, but I often have Internet connection issues from the computer in the other room. It can find the access point, but not connect to Internet. I reinstalled the WUSB300N driver again, but I still cannot connect.
View 2 Replies
View Related
Aug 9, 2008
I've just bought a WUSB300N Wireless USB Network Adapter and installed it with the Vista drivers on my Windows 2008 server. Drivers are succesfully installed and the Device status says "Device is working properly" but when I want to connect to a network it doesnot show any networks. I'm sure there are network available because I'm connected now on my other laptop ;-) typing this message.
View 5 Replies
View Related
Aug 15, 2011
I recently installed an E4200 router/AP and, on one desktop, an AE2500 USB Adapter. All the other devices on the LAN work fine and the laptops, even show improved tranfer rates. The desktop, with the AE2500, shows good or very good signal strength, but the speed is down around 5.5 Mbps. Running a full backup of the HDD proves the slow speed.
View 7 Replies
View Related
Feb 23, 2011
I was wondering if the AE1000 is the best option for the the E4200 wireless router? Ultimately I want an adapter that can take advantage of the full potential of the router (as in the 450 Mbps wireless speed).
View 1 Replies
View Related
Aug 13, 2012
I'm using my AE1000 to connect my computer in my home office to the router downstairs. The problem I'm having is my neighbor's routers show up on my network connections and it ends up slowing down my internet. Is there any way I can keep my adapter from trying to connect to my neighbors?
View 2 Replies
View Related
Dec 23, 2011
I had to change from a WRT300N wireless router which died to a new E2500. I noticed that the speed my computers report that they are connected to the wireless network connection is now 144.5 mps, versus 270 mps with the WRT300N. There is no change in location of the devices or computers. The computers use a WUSB300N adapter. Is there a setting or setup that needs to be changed?
View 2 Replies
View Related
Sep 26, 2012
I had connected my WRT54G to my wireless router by disableing the DHCP on WRT54G. It worked great until recently. Now I upgraded my linksys box to the latest and greatest AC1750. Iwant to use complete features of AC1750 router. So to do this, How do I connect Verizon Model(its modem+wireless router) to this Router and have AC1750 drive everything.
View 1 Replies
View Related
Mar 3, 2013
I have a Linksys E2000 router and have not had any problems connecting to it for the past year since getting it, until today.
View 1 Replies
View Related
Feb 20, 2012
I've had for several years very good experience with the WRT54GL. Based on that experience I upgraded to a e4200.But so far it's not living up to my expectations (media server not probably working with external harddisk, no advanced logging of incoming/outgoing traffic, connection problems) and I'm getting pretty frustrated with it.Problem right now is that one of my laptops with Windows 7 is often not connecting correctly to the wireless network of the e4200. It's giving a "unidentified network" error. Rebooting computer and router is not working. The computer is (always) reliable connecting to another wireless network in my home. It seems the DHCP is not working properly?
View 1 Replies
View Related
Apr 11, 2011
I think I have worked out that you can`t currently connect a usb printer to the usb port on the e4200 in order to share it over the network.
However I have heard reports that this might facility might be enabled in the spring.
I have also heard something about `virtual usb` but I don`t know whether this has anything to do with it.
View 9 Replies
View Related
Nov 24, 2012
Have a Linksys E4200 router located in my basement and I am experiencing a puzzling wired connectivity issue as follows: Port 1 on the router is for my study, I have no problem getting connection regardless if I use my study's Ethernet jack or if I run a 5 ft. cable (hereinafter THE CABLE) from the router’s port 1 to my laptop (i.e., cabling does not make a difference).I then connect to router port 1 an EZXS55W Linksys switch (using port 1 on the switch and THE CABLE) and then connect my laptop to port 2 on the switch using a second cable. I am unable to connect to the network/internet even after rebooting both the cable modem and router.I then reconnect my study to port 1 on the router, I go to my study and connect the study’s Ethernet jack using THE CABLE to port 1 on the switch and using a second cable from port 2 on the switch to my laptop. …. I get an network/internet connection immediately ! FYI, I have had the exact problem with switches EZXS88W and SE2500 (no longer own this).
View 5 Replies
View Related
Aug 23, 2011
I've been messing around with this for several weeks to no avail. I've never had a problem establishing a VPN connection within my LAN. I've tried several workarounds, learning things in the processs, but to no avail.I've set up a VPN connection with Windows 7. The RRAS server is at home and I'm attempting to access from school (or the internet anywhere).I have no problem establishing the VPN connection (that I can see). Port 1723 is forwarded for both UDP and TCP to a static LAN address (198.162.1.124) in the E4200. PPTP pass-through is enabled (as well as the other two options).I can't see anything on the server after connecting. I'm using a DDNS. It works just fine INSIDE the LAN; I've even mapped a network drive to "S:". Accessing ANYTHING outside of the LAN over a VPN, however, isn't working. [code]
View 9 Replies
View Related
Aug 19, 2011
I have an issue with a brand new E4200 router. My E4200 can connect no issue with the following devices: Ipad, AppleTV, Dell Laptop, Ibm Laptop. It is also wired connected to my home PC. Internet works fine and file sharing/network works good for all the above devices.
The problem is that My wife and I's Phone can not detect the wifi network and can not connect to it. The SSID broadcast is enabled on both frequencies (2.4 and 5). I have try configuring the network manually on both the Android phones..it does not work.. it records the data but keep sayng the network is out of range (although I'm right next to the router). I hva eplayed with various channels on both frequecies and played also with the MTU size.One of the Android phone is Garmin the other Acer Liquid...different brand running both Android 2.2...
Firmware on E4200 is 1.0.02
All settings reset to Auto/MIxed for now.
WPA2 is enable with security key
SSID is enabled on both frequency
no MAC address filtering is setup
Both my phones can detect other networks and can connect fine to friends and family networks...So I suspect a compatibility problem between router an Android..I have contacted Linksys support twice with no avail. I have contacted both Acer and Garmin...they refer me to linksys
View 1 Replies
View Related
Sep 22, 2011
I am trying to replace my Cradlepoint MBR1200 with a CBR450 in bridge mode, to let the E4200 take over all the WAP and DHCP handling, but having a hard time.I set the CBR450 in bridge mode and when I connect it to my laptop it properly passes the IP info to my Mac and allows me to connect. I then connect it to the E4200 WAN port with it set to get IP address automatically but nothing ever happens and I am never allowed traffic in/out over the WAN.
I *can* get internet access by leaving the CBR450 in normal mode (handling DHCP, etc) and then plugging it into the E4200 LAN port and having the E4200 set to bridge.why the E4200 WAN port is not getting the bridge info and allowing connection? FWIW, works fine connecting to a DSL modem with the DSL model set to bridge mode at my other house.
CBR450 and E4200 both on latest firmwares.
View 2 Replies
View Related
Jan 19, 2012
Have the issue of connecting a pc an NAS to a E4200 and when transferring from pc to NAS, only getting < 10 mbps transfer rates? NAS is Dlink 321. PC has Gigabit ethernet card. cables are cat 6. Even when I force the NAS and pc network card speeds to 1.0 GBps full duplex, I only transfer files at < 10 Mbps.
View 3 Replies
View Related
Dec 6, 2011
I purchased a WAG320N and E4200 and have manged to get the modem connected to the internet and it's running fine in that respect, with no adjusting done to the settings.My intentions are to connect the WAG320N to the E4200 wirelessly, as they are in seperate rooms in the house and have done a similar setup in the past with a 7300G Billion Modem and WRT54GL.
With the E4200 I quickly discovered there was no bridge mode out of the box, but checking these forums got the indication that the firmware updates added this capability, so updated it..I entered the IP Address of the Router, the Subnet mask of the network and the Default Gateway / Modem router IP address into the fields, following this guide, but have not been able to get the computers to contact one another, nor ping the other devices.
View 1 Replies
View Related
Aug 27, 2011
I have an E4200 wireless router which is connected via USB to my Canon MX 308 printer. I am able to print from Windows computers that are connected to this router (via WiFi of course). My iPad 2.0 is able to connect to the internet via the router. However I am not able to print content from my iPad via the E4200 router (via Wifi using Cisco Connect software).
View 1 Replies
View Related
Sep 17, 2012
I'm trying to connect the D-Link 930L Wireless N Camera to my E4200 router. When I have the camera connected via the Ethernet cable it works fine, as soon as I unplug the Ethernet cable it will not connect wirelessly. I tested the camera on a friends router E3000 and the camera connects fine and work flawlessly on his network wirelessly. Any settings in the router that need to changed or set differently?? All of my other devices work great. I have been through D-Links Tech support all things point back to my router.
View 6 Replies
View Related
Dec 9, 2011
I have a new E4200 with the latest firmware and my slingbox seems to not be playing nice with the router. It refuses to take the IP I reserved for the SB, but always defaults to 192.168.2.254. I use a 2 subnet just in case you're wondering. I have tried multiple reboots and the IP does not change. I have tried turning off UPNP, figuring that was hijacking the dhcp server, but that hasn't changed anything. I also notice that a few of my connected devices do not show up in the dhcp list, yet they connect and work ok.
View 2 Replies
View Related
Jan 4, 2013
I was attempting to use my EA4200 in bridge mode but found out for some reason my devices weren't connecting to the internet. So I decided to try to access the router through the IP address of the router with no avail. So I pull the router and plug it in normally and notice that it keeps flashing. So that already gives me an idea something is wrong. I go through the process of unplugging everything from the router, and plugging my PC directly into the LAN port 1 of the router then powering it up. On my network connection list it keeps trying to identify the network but keeps failing (keep in mind that the router still is flashing). So I decide to attempt a 10 second reset, then a 30 second, then a 30-30-30. All with no success. The router keeps flashing.
Which gets me to the point where I am now... router flashing at me, and wondering if this now out of warrenty unit was a waste of money. I am noticing that a lot of people have had questions and issues with the E4200v2 which now concerns me, well hopefully this can be fixed.
View 9 Replies
View Related
Feb 9, 2011
Last week I purchased the E4200 and for simplicity, I configured it with basic settings using Cisco Connect. Today, I went into the web interface. The only thing I did was review settings and get the Routers PIN (it appears that Intel Chipset cards on Windows requires this PIN?) Close the browser (did not save any settings) and now I am completely locked out of the device. Cannot connect does not accept the wireless password. I hard reset the device, ran through the wizard. Everything was working again. Launch the browser and connected to the device closing window and balm?
View 9 Replies
View Related
Apr 1, 2012
I connect to my corporate network using Cisco AnyConnect Secure Mobility Client. Once connected I can no longer print to my LAN attached printer and other local resources. I use the Cisco/Lyncsys E4200 router on my LAN and can re-connect to the storage on the local LAN by setting up Port Forwarding of port 21 and MS Windows FTP folder sharing. However, I can't seem to connect to a Terminal Services client by forwarding port 3389. Is there a way to connect to the local LAN after logging into the VPN connection. I can connect to regular HTTP/HTTPS sites and most other type of connectiins, just not my own local resources.
View 3 Replies
View Related
Apr 30, 2013
I'm planning to flash my E4200 to WRT-DD to enable VPN feature in my house. Typically in my college dorms all ports are closed beside 80 and 443. From what I understand from VPN is that you can connect directly to it and operate in a network as if you are working inside that VPN's network. Do I understand this correctly (So I can have all ports open)? Anyways, will I be able to connect to my router's VPN while being in the college dorm having only port 80 and 443 open?
View 19 Replies
View Related
Dec 24, 2011
making Windows 7 do what it's supposed to? Seriously, there needs to be a button you can click to roll it completely back to XP.
View 1 Replies
View Related
May 24, 2011
When I get to the screen that asks for the the security password, and after typing in password then at the bottom their is a button for Back and one for Cancel. The button in the middle for Next is not highlited or clickable.
View 2 Replies
View Related
May 26, 2011
How to install model WUSB54GSC.
View 5 Replies
View Related
Jan 17, 2012
I run the CD setup disk and the driver install correctly.In the "Connecting the Adapter" screen I click next before connecting the adapter,the setup screen just close with out any notification and no icons on the system tray.I shut down the machine, insert the adapter and power on the machine,now I have the monitor icon and a wireless connection icon in the system tray (the Power led is green and the Link led isblink),when I double click on the monitor icon I got the following screen: no available wireless and the refresh, connect and manual setup are disabled.when I click on the "open the monitor" form the right click menu I got the following screen: also nothing to do on this screen.so I think it's was because I don't have any wi-fi around me, I shutdown the computer raise my wi-fi andrestart the machine, now the led in the same status but the system tray icons didn't appears and when Itry to open it from the menu it's run for few seconds without any screen and disappear.
View 6 Replies
View Related
Jan 21, 2011
I'm running Windows 7-64 bit. The AE1000 works great so far, in the one day I've had it, and it appears to start itself and connect when turning the computer on (unlike other people on here that I've seen). BUT, it's all pointless if I can't put my computer into standby. The adapter kicks it right back out as soon as I try to sleep the computer.
I've checked the device settings and "allow the device to wake the computer" is unchecked (in fact, it's grayed out). I rarely turn off the computer; I much prefer to just put it in standby. I don't want to have to unplug the adapter every time I do that.
View 1 Replies
View Related
Jul 5, 2011
I recently re-installed Windows on my PC, and I had the Wireless-G PCI Adapter installed before I done the re-installation.Now I've re-installed Windows, the adapter doesn't work. Do I have to re-do the whole process again? Also, I didn't actually install it myself, so any detailed step-by-step tutorial?
View 3 Replies
View Related
